#define addgroup_trivial_usage \
"[-g GID] group_name [user_name]"
#define addgroup_full_usage \
#define addgroup_trivial_usage \
"[-g GID] group_name [user_name]"
#define addgroup_full_usage \
" -h DIR Assign home directory DIR\n" \
" -g GECOS Assign gecos field GECOS\n" \
" -s SHELL Assign login shell SHELL\n" \
" -G Add the user to existing group GROUP\n" \
" -h DIR Assign home directory DIR\n" \
" -g GECOS Assign gecos field GECOS\n" \
" -s SHELL Assign login shell SHELL\n" \
" -G Add the user to existing group GROUP\n" \
" -D Do not assign a password (logins still possible via ssh)\n" \
" -H Do not create the home directory"
#define adjtimex_trivial_usage \
"[-q] [-o offset] [-f frequency] [-p timeconstant] [-t tick]"
#define adjtimex_full_usage \
" -D Do not assign a password (logins still possible via ssh)\n" \
" -H Do not create the home directory"
#define adjtimex_trivial_usage \
"[-q] [-o offset] [-f frequency] [-p timeconstant] [-t tick]"
#define adjtimex_full_usage \
- "Reads and optionally sets system timebase parameters.\n" \
- "See adjtimex(2).\n\n" \
- "Options:\n" \
- " -q quiet mode - do not print\n" \
- " -o offset time offset, microseconds\n" \
- " -f frequency frequency adjust, integer kernel units (65536 is 1ppm)\n" \
+ "Read and optionally set system timebase parameters.\n" \
+ "See adjtimex(2)." \
+ "\n\nOptions:\n" \
+ " -q Quiet mode - do not print\n" \
+ " -o offset Time offset, microseconds\n" \
+ " -f frequency Frequency adjust, integer kernel units (65536 is 1ppm)\n" \
- "Extract or list FILES from an ar archive.\n\n" \
- "Options:\n" \
- " -o preserve original dates\n" \
- " -p extract to stdout\n" \
- " -t list\n" \
- " -x extract\n" \
- " -v verbosely list files processed"
+ "Extract or list FILES from an ar archive" \
+ "\n\nOptions:\n" \
+ " -o Preserve original dates\n" \
+ " -p Extract to stdout\n" \
+ " -t List\n" \
+ " -x Extract\n" \
+ " -v Verbosely list files processed"
+
+#define arp_trivial_usage \
+ "\n" \
+ "[-vn] [-H type] [-i if] -a [hostname]\n" \
+ "[-v] [-i if] -d hostname [pub]\n" \
+ "[-v] [-H type] [-i if] -s hostname hw_addr [temp]\n" \
+ "[-v] [-H type] [-i if] -s hostname hw_addr [netmask nm] pub\n" \
+ "[-v] [-H type] [-i if] -Ds hostname ifa [netmask nm] pub\n"
+#define arp_full_usage \
+ "Manipulate the system ARP cache" \
+ "\n\nOptions:" \
+ "\n -a Display (all) hosts" \
+ "\n -s Set a new ARP entry" \
+ "\n -d Delete a specified entry" \
+ "\n -v Verbose" \
+ "\n -n Don't resolve names" \
+ "\n -i if Specify network interface (e.g. eth0)" \
+ "\n -D Read <hwaddr> from given device" \
+ "\n -A, -p Specify protocol family" \
+ "\n -H hwtype Specify hardware address type"
#define arping_trivial_usage \
"[-fqbDUA] [-c count] [-w timeout] [-i device] [-s sender] target"
#define arping_full_usage \
#define arping_trivial_usage \
"[-fqbDUA] [-c count] [-w timeout] [-i device] [-s sender] target"
#define arping_full_usage \
- " -v var=val assign value 'val' to variable 'var'\n" \
- " -F sep use 'sep' as field separator\n" \
- " -f progname read program source from file 'progname'"
+ " -v var=val Assign value 'val' to variable 'var'\n" \
+ " -F sep Use 'sep' as field separator\n" \
+ " -f progname Read program source from file 'progname'"
" -c Write output to standard output\n" \
" -f Force"
#define lzmacat_trivial_usage \
"FILE"
#define lzmacat_full_usage \
" -c Write output to standard output\n" \
" -f Force"
#define lzmacat_trivial_usage \
"FILE"
#define lzmacat_full_usage \
" -j Use julian dates\n" \
" -y Display the entire year"
#define cat_trivial_usage \
"[-u] [FILE]..."
#define cat_full_usage \
" -j Use julian dates\n" \
" -y Display the entire year"
#define cat_trivial_usage \
"[-u] [FILE]..."
#define cat_full_usage \
#define chattr_trivial_usage \
"[-R] [-+=AacDdijsStTu] [-v version] files..."
#define chattr_full_usage \
#define chattr_trivial_usage \
"[-R] [-+=AacDdijsStTu] [-v version] files..."
#define chattr_full_usage \
- " - remove attributes\n" \
- " + add attributes\n" \
- " = set attributes\n" \
+ " - Remove attributes\n" \
+ " + Add attributes\n" \
+ " = Set attributes\n" \
- " A don't track atime\n" \
- " a append mode only\n" \
- " c enable compress\n" \
- " D write dir contents synchronously\n" \
- " d do not backup with dump\n" \
- " i cannot be modified (immutable)\n" \
- " j write all data to journal first\n" \
- " s zero disk storage when deleted\n" \
- " S write file contents synchronously\n" \
- " t disable tail-merging of partial blocks with other files\n" \
- " u allow file to be undeleted\n" \
- "Options:\n" \
- " -R recursively list subdirectories\n" \
- " -v set the file's version/generation number"
+ " A Don't track atime\n" \
+ " a Append mode only\n" \
+ " c Enable compress\n" \
+ " D Write dir contents synchronously\n" \
+ " d Do not backup with dump\n" \
+ " i Cannot be modified (immutable)\n" \
+ " j Write all data to journal first\n" \
+ " s Zero disk storage when deleted\n" \
+ " S Write file contents synchronously\n" \
+ " t Disable tail-merging of partial blocks with other files\n" \
+ " u Allow file to be undeleted\n" \
+ "Options:\n" \
+ " -R Recursively list subdirectories\n" \
+ " -v Set the file's version/generation number"
#define chgrp_trivial_usage \
"[-Rh"USE_DESKTOP("cvf")"]... GROUP FILE..."
#define chgrp_full_usage \
#define chgrp_trivial_usage \
"[-Rh"USE_DESKTOP("cvf")"]... GROUP FILE..."
#define chgrp_full_usage \
"[-R"USE_DESKTOP("cvf")"] MODE[,MODE]... FILE..."
#define chmod_full_usage \
"Each MODE is one or more of the letters ugoa, one of the\n" \
"[-R"USE_DESKTOP("cvf")"] MODE[,MODE]... FILE..."
#define chmod_full_usage \
"Each MODE is one or more of the letters ugoa, one of the\n" \
#define chown_trivial_usage \
"[-Rh"USE_DESKTOP("cvf")"]... OWNER[<.|:>[GROUP]] FILE..."
#define chown_full_usage \
#define chown_trivial_usage \
"[-Rh"USE_DESKTOP("cvf")"]... OWNER[<.|:>[GROUP]] FILE..."
#define chown_full_usage \
- "Change the owner and/or group of each FILE to OWNER and/or GROUP.\n" \
- "\nOptions:\n" \
- " -R Changes files and directories recursively\n" \
- " -h Do not dereference symbolic links" \
+ "Change the owner and/or group of each FILE to OWNER and/or GROUP" \
+ "\n\nOptions:" \
+ "\n -R Changes files and directories recursively" \
+ "\n -h Do not dereference symbolic links" \
"[-/ dir] [-n nice] [-m bytes] [-d bytes] [-o files] " \
"[-p processes] [-f bytes] [-c bytes] prog args"
#define chpst_full_usage \
"[-/ dir] [-n nice] [-m bytes] [-d bytes] [-o files] " \
"[-p processes] [-f bytes] [-c bytes] prog args"
#define chpst_full_usage \
- "Change the process state and run specified program.\n\n" \
- " -u user[:grp] set uid and gid\n" \
- " -U user[:grp] set environment variables UID and GID\n" \
- " -e dir set environment variables as specified by files\n" \
+ "Change the process state and run specified program" \
+ "\n\nOptions:\n" \
+ " -u user[:grp] Set uid and gid\n" \
+ " -U user[:grp] Set environment variables UID and GID\n" \
+ " -e dir Set environment variables as specified by files\n" \
- " -/ dir chroot to dir\n" \
- " -n inc add inc to nice value\n" \
- " -m bytes limit data segment, stack segment, locked physical pages,\n" \
+ " -/ dir Chroot to dir\n" \
+ " -n inc Add inc to nice value\n" \
+ " -m bytes Limit data segment, stack segment, locked physical pages,\n" \
- " -d bytes limit data segment\n" \
- " -o n limit the number of open file descriptors per process to n\n" \
- " -p n limit number of processes per uid to n\n" \
- " -f bytes limit output file size to bytes bytes\n" \
- " -c bytes limit core file size to bytes bytes\n" \
- " -v verbose\n" \
- " -P run prog in a new process group\n" \
- " -0 close standard input\n" \
- " -1 close standard output\n" \
- " -2 close standard error"
+ " -d bytes Limit data segment\n" \
+ " -o n Limit the number of open file descriptors per process to n\n" \
+ " -p n Limit number of processes per uid to n\n" \
+ " -f bytes Limit output file size to bytes bytes\n" \
+ " -c bytes Limit core file size to bytes bytes\n" \
+ " -v Verbose\n" \
+ " -P Run prog in a new process group\n" \
+ " -0 Close standard input\n" \
+ " -1 Close standard output\n" \
+ " -2 Close standard error"
- "Sets uid and gid to account's uid and gid, removing all supplementary\n" \
- "groups, then runs prog"
+ "Set uid and gid to account's uid and gid, removing all supplementary\n" \
+ "groups, then run prog"
#define softlimit_trivial_usage \
"[-a allbytes] [-c corebytes] [-d databytes] [-f filebytes] " \
"[-l lockbytes] [-m membytes] [-o openfiles] [-p processes] " \
"[-r residentbytes] [-s stackbytes] [-t cpusecs] prog args"
#define softlimit_full_usage \
#define softlimit_trivial_usage \
"[-a allbytes] [-c corebytes] [-d databytes] [-f filebytes] " \
"[-l lockbytes] [-m membytes] [-o openfiles] [-p processes] " \
"[-r residentbytes] [-s stackbytes] [-t cpusecs] prog args"
#define softlimit_full_usage \
" -m n Same as -d n -s n -l n -a n\n" \
" -d n Limit the data segment per process to n bytes\n" \
" -s n Limit the stack segment per process to n bytes\n" \
" -m n Same as -d n -s n -l n -a n\n" \
" -d n Limit the data segment per process to n bytes\n" \
" -s n Limit the stack segment per process to n bytes\n" \
" -1 Suppress lines unique to FILE1\n" \
" -2 Suppress lines unique to FILE2\n" \
" -3 Suppress lines common to both files"
" -1 Suppress lines unique to FILE1\n" \
" -2 Suppress lines unique to FILE2\n" \
" -3 Suppress lines common to both files"
" -a Same as -dpR\n" \
" -d,-P Preserve links\n" \
" -H,-L Dereference all symlinks (implied by default)\n" \
" -p Preserve file attributes if possible\n" \
" -a Same as -dpR\n" \
" -d,-P Preserve links\n" \
" -H,-L Dereference all symlinks (implied by default)\n" \
" -p Preserve file attributes if possible\n" \
- " -f force, overwrite\n" \
- " -i interactive, prompt before overwrite\n" \
+ " -f Force, overwrite\n" \
+ " -i Interactive, prompt before overwrite\n" \
#define cpio_full_usage \
"Extract or list files from a cpio archive\n" \
"Main operation mode:\n" \
#define cpio_full_usage \
"Extract or list files from a cpio archive\n" \
"Main operation mode:\n" \
- " d make leading directories\n" \
- " i extract\n" \
- " m preserve mtime\n" \
- " t list\n" \
- " v verbose\n" \
- " u unconditional overwrite\n" \
- " F input from file"
+ " d Make leading directories\n" \
+ " i Extract\n" \
+ " m Preserve mtime\n" \
+ " t List\n" \
+ " v Verbose\n" \
+ " u Unconditional overwrite\n" \
+ " F Input from file"
#define crond_trivial_usage \
"-d[#] -c <crondir> -f -b"
#define crond_full_usage \
" -d [#] -l [#] -S -L logfile -f -b -c dir\n" \
#define crond_trivial_usage \
"-d[#] -c <crondir> -f -b"
#define crond_full_usage \
" -d [#] -l [#] -S -L logfile -f -b -c dir\n" \
- " -d num debug level\n" \
- " -l num log level (8 - default)\n" \
- " -S log to syslogd (default)\n" \
- " -L file log to file\n" \
- " -f run in foreground\n" \
- " -b run in background (default)\n" \
- " -c dir working dir"
+ " -d num Debug level\n" \
+ " -l num Log level (8 - default)\n" \
+ " -S Log to syslogd (default)\n" \
+ " -L file Log to file\n" \
+ " -f Run in foreground\n" \
+ " -b Run in background (default)\n" \
+ " -c dir Working dir"
#define crontab_trivial_usage \
"[-c dir] {file|-}|[-u|-l|-e|-d user]"
#define crontab_full_usage \
#define crontab_trivial_usage \
"[-c dir] {file|-}|[-u|-l|-e|-d user]"
#define crontab_full_usage \
" - <opts> replace crontab from stdin\n" \
" -u user specify user\n" \
" -l [user] list crontab for user\n" \
" - <opts> replace crontab from stdin\n" \
" -u user specify user\n" \
" -l [user] list crontab for user\n" \
" -b LIST Output only bytes from LIST\n" \
" -c LIST Output only characters from LIST\n" \
" -d CHAR Use CHAR instead of tab as the field delimiter\n" \
" -b LIST Output only bytes from LIST\n" \
" -c LIST Output only characters from LIST\n" \
" -d CHAR Use CHAR instead of tab as the field delimiter\n" \
#define date_trivial_usage \
"[OPTION]... [MMDDhhmm[[CC]YY][.ss]] [+FORMAT]"
#define date_full_usage \
#define date_trivial_usage \
"[OPTION]... [MMDDhhmm[[CC]YY][.ss]] [+FORMAT]"
#define date_full_usage \
" -R Outputs RFC-822 compliant date string\n" \
" -d STRING Displays time described by STRING, not 'now'\n" \
USE_FEATURE_DATE_ISOFMT( \
" -R Outputs RFC-822 compliant date string\n" \
" -d STRING Displays time described by STRING, not 'now'\n" \
USE_FEATURE_DATE_ISOFMT( \
"This is a Tiny RPN calculator that understands the\n" \
"following operations: +, add, -, sub, *, mul, /, div, %, mod, " \
"**, exp, and, or, not, eor.\n" \
"This is a Tiny RPN calculator that understands the\n" \
"following operations: +, add, -, sub, *, mul, /, div, %, mod, " \
"**, exp, and, or, not, eor.\n" \
"p - Prints the value on the top of the stack, without altering the stack\n" \
"f - Prints the entire contents of the stack without altering anything\n" \
"o - Pops the value off the top of the stack and uses it to set the output radix\n" \
"p - Prints the value on the top of the stack, without altering the stack\n" \
"f - Prints the entire contents of the stack without altering anything\n" \
"o - Pops the value off the top of the stack and uses it to set the output radix\n" \
- "Copy a file, converting and formatting according to options\n\n" \
- " if=FILE read from FILE instead of stdin\n" \
- " of=FILE write to FILE instead of stdout\n" \
- " bs=N read and write N bytes at a time\n" \
+ "Copy a file with converting and formatting" \
+ "\n\nOptions:\n" \
+ " if=FILE Read from FILE instead of stdin\n" \
+ " of=FILE Write to FILE instead of stdout\n" \
+ " bs=N Read and write N bytes at a time\n" \
- " obs=N write N bytes at a time\n") \
- " count=N copy only N input blocks\n" \
- " skip=N skip N input blocks\n" \
- " seek=N skip N output blocks\n" \
+ " obs=N Write N bytes at a time\n") \
+ " count=N Copy only N input blocks\n" \
+ " skip=N Skip N input blocks\n" \
+ " seek=N Skip N output blocks\n" \
- " conv=notrunc don't truncate output file\n" \
- " conv=noerror continue after read errors\n" \
- " conv=sync pad blocks with zeros\n") \
+ " conv=notrunc Don't truncate output file\n" \
+ " conv=noerror Continue after read errors\n" \
+ " conv=sync Pad blocks with zeros\n") \
"\n" \
"Numbers may be suffixed by c (x1), w (x2), b (x512), kD (x1000), k (x1024),\n" \
"MD (x1000000), M (x1048576), GD (x1000000000) or G (x1073741824)"
"\n" \
"Numbers may be suffixed by c (x1), w (x2), b (x512), kD (x1000), k (x1024),\n" \
"MD (x1000000), M (x1048576), GD (x1000000000) or G (x1073741824)"
#define devfsd_trivial_usage \
"mntpnt [-v]" \
USE_DEVFSD_FG_NP("[-fg][-np]" )
#define devfsd_full_usage \
#define devfsd_trivial_usage \
"mntpnt [-v]" \
USE_DEVFSD_FG_NP("[-fg][-np]" )
#define devfsd_full_usage \
- "Optional daemon for managing devfs permissions and old device name symlinks.\n" \
- "\nOptions:" \
- "\n mntpnt The mount point where devfs is mounted." \
- "\n -v Print the protocol version numbers for devfsd." \
- "\n and the kernel-side protocol version and exits." \
+ "Manage devfs permissions and old device name symlinks" \
+ "\n\nOptions:" \
+ "\n mntpnt The mount point where devfs is mounted" \
+ "\n -v Print the protocol version numbers for devfsd" \
+ "\n and the kernel-side protocol version and exits" \
- "\n -h print sizes in human readable format (e.g., 1K 243M 2G )\n" \
- " -m print sizes in megabytes\n" \
- " -k print sizes in kilobytes(default)") \
+ "\n -h Print sizes in human readable format (e.g., 1K 243M 2G )\n" \
+ " -m Print sizes in megabytes\n" \
+ " -k Print sizes in kilobytes(default)") \
#define dhcprelay_trivial_usage \
"[client_device_list] [server_device]"
#define dhcprelay_full_usage \
#define dhcprelay_trivial_usage \
"[client_device_list] [server_device]"
#define dhcprelay_full_usage \
#define dhcprelay_trivial_usage \
"[client_device_list] [server_device]"
#define dhcprelay_full_usage \
#define dhcprelay_trivial_usage \
"[client_device_list] [server_device]"
#define dhcprelay_full_usage \
#define diff_trivial_usage \
"[-abdiNqrTstw] [-L LABEL] [-S FILE] [-U LINES] FILE1 FILE2"
#define diff_full_usage \
"Compare files line by line and output the differences between them.\n" \
#define diff_trivial_usage \
"[-abdiNqrTstw] [-L LABEL] [-S FILE] [-U LINES] FILE1 FILE2"
#define diff_full_usage \
"Compare files line by line and output the differences between them.\n" \
" -a Treat all files as text\n" \
" -b Ignore changes in the amount of whitespace\n" \
" -d Try hard to find a smaller set of changes\n" \
" -a Treat all files as text\n" \
" -b Ignore changes in the amount of whitespace\n" \
" -d Try hard to find a smaller set of changes\n" \
" -L Use LABEL instead of the filename in the unified header\n" \
" -N Treat absent files as empty\n" \
" -q Output only whether files differ\n" \
" -L Use LABEL instead of the filename in the unified header\n" \
" -N Treat absent files as empty\n" \
" -q Output only whether files differ\n" \
" -S Start with FILE when comparing directories\n" \
" -T Make tabs line up by prefixing a tab when necessary\n" \
" -s Report when two files are the same\n" \
" -t Expand tabs to spaces in output\n" \
" -U Output LINES lines of context\n" \
" -S Start with FILE when comparing directories\n" \
" -T Make tabs line up by prefixing a tab when necessary\n" \
" -s Report when two files are the same\n" \
" -t Expand tabs to spaces in output\n" \
" -U Output LINES lines of context\n" \
#define dmesg_trivial_usage \
"[-c] [-n LEVEL] [-s SIZE]"
#define dmesg_full_usage \
#define dmesg_trivial_usage \
"[-c] [-n LEVEL] [-s SIZE]"
#define dmesg_full_usage \
" -c Clears the ring buffer's contents after printing\n" \
" -n LEVEL Sets console logging level\n" \
" -s SIZE Use a buffer of size SIZE"
" -c Clears the ring buffer's contents after printing\n" \
" -n LEVEL Sets console logging level\n" \
" -s SIZE Use a buffer of size SIZE"
#define dnsd_trivial_usage \
"[-c config] [-t seconds] [-p port] [-i iface-ip] [-d]"
#define dnsd_full_usage \
#define dnsd_trivial_usage \
"[-c config] [-t seconds] [-p port] [-i iface-ip] [-d]"
#define dnsd_full_usage \
- "When no file is given, uses stdin for input and stdout for output.\n\n" \
- "Options:\n" \
- " -u output will be in UNIX format\n" \
- " -d output will be in DOS format"
+ "When no file is given, use stdin for input and stdout for output." \
+ "\n\nOptions:\n" \
+ " -u Output will be in UNIX format\n" \
+ " -d Output will be in DOS format"
#define dpkg_trivial_usage \
"[-ilCPru] [-F option] package_name"
#define dpkg_full_usage \
#define dpkg_trivial_usage \
"[-ilCPru] [-F option] package_name"
#define dpkg_full_usage \
" -i Install the package\n" \
" -l List of installed packages\n" \
" -C Configure an unpackaged package\n" \
" -i Install the package\n" \
" -l List of installed packages\n" \
" -C Configure an unpackaged package\n" \
#define dpkg_deb_trivial_usage \
"[-cefxX] FILE [argument]"
#define dpkg_deb_full_usage \
#define dpkg_deb_trivial_usage \
"[-cefxX] FILE [argument]"
#define dpkg_deb_full_usage \
" -c List contents of filesystem tree\n" \
" -e Extract control files to [argument] directory\n" \
" -f Display control field name starting with [argument]\n" \
" -c List contents of filesystem tree\n" \
" -e Extract control files to [argument] directory\n" \
" -f Display control field name starting with [argument]\n" \
"Disk space is printed in units of " \
USE_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("1024") \
SKIP_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("512") \
"Disk space is printed in units of " \
USE_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("1024") \
SKIP_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("512") \
- " bytes.\n\n" \
- "Options:\n" \
- " -a show sizes of files in addition to directories\n" \
- " -H follow symbolic links that are FILE command line args\n" \
- " -L follow all symbolic links encountered\n" \
- " -d N limit output to directories (and files with -a) of depth < N\n" \
- " -c output a grand total\n" \
- " -l count sizes many times if hard linked\n" \
- " -s display only a total for each argument\n" \
- " -x skip directories on different filesystems\n" \
+ " bytes." \
+ "\n\nOptions:\n" \
+ " -a Show sizes of files in addition to directories\n" \
+ " -H Follow symbolic links that are FILE command line args\n" \
+ " -L Follow all symbolic links encountered\n" \
+ " -d N Limit output to directories (and files with -a) of depth < N\n" \
+ " -c Output a grand total\n" \
+ " -l Count sizes many times if hard linked\n" \
+ " -s Display only a total for each argument\n" \
+ " -x Skip directories on different filesystems\n" \
#define dumpkmap_example_usage \
"$ dumpkmap > keymap\n"
#define dumpleases_trivial_usage \
"[-r|-a] [-f LEASEFILE]"
#define dumpleases_full_usage \
#define dumpkmap_example_usage \
"$ dumpkmap > keymap\n"
#define dumpleases_trivial_usage \
"[-r|-a] [-f LEASEFILE]"
#define dumpleases_full_usage \
" -f, --file=FILENAME Leases file to load\n" \
" -r, --remaining Interpret lease times as time remaining\n" \
" -a, --absolute Interpret lease times as expire time"
" -f, --file=FILENAME Leases file to load\n" \
" -r, --remaining Interpret lease times as time remaining\n" \
" -a, --absolute Interpret lease times as expire time"
"[-l|-L bad_blocks_file] [-C fd] [-j external_journal] " \
"[-E extended-options] device"
#define e2fsck_full_usage \
"[-l|-L bad_blocks_file] [-C fd] [-j external_journal] " \
"[-E extended-options] device"
#define e2fsck_full_usage \
" -p Automatic repair (no questions)\n" \
" -n Make no changes to the filesystem\n" \
" -y Assume 'yes' to all questions\n" \
" -p Automatic repair (no questions)\n" \
" -n Make no changes to the filesystem\n" \
" -y Assume 'yes' to all questions\n" \
#define echo_trivial_usage \
USE_FEATURE_FANCY_ECHO("[-neE] ") "[ARG ...]"
#define echo_full_usage \
#define echo_trivial_usage \
USE_FEATURE_FANCY_ECHO("[-neE] ") "[ARG ...]"
#define echo_full_usage \
- "Options:\n" \
- " -n suppress trailing newline\n" \
- " -e interpret backslash-escaped characters (i.e., \\t=tab)\n" \
- " -E disable interpretation of backslash-escaped characters" \
+ "\n\nOptions:\n" \
+ " -n Suppress trailing newline\n" \
+ " -e Interpret backslash-escaped characters (i.e., \\t=tab)\n" \
+ " -E Disable interpretation of backslash-escaped characters" \
- "Prints the current environment or runs a program after setting\n" \
- "up the specified environment.\n\n" \
- "Options:\n" \
- " -, -i start with an empty environment\n" \
- " -u remove variable from the environment"
+ "Print the current environment or run a program after setting\n" \
+ "up the specified environment" \
+ "\n\nOptions:\n" \
+ " -, -i Start with an empty environment\n" \
+ " -u Remove variable from the environment"
#define ether_wake_trivial_usage \
"[-b] [-i iface] [-p aa:bb:cc:dd[:ee:ff]] MAC"
#define ether_wake_full_usage \
"Send a magic packet to wake up sleeping machines.\n" \
"MAC must be a station address (00:11:22:33:44:55) or\n" \
#define ether_wake_trivial_usage \
"[-b] [-i iface] [-p aa:bb:cc:dd[:ee:ff]] MAC"
#define ether_wake_full_usage \
"Send a magic packet to wake up sleeping machines.\n" \
"MAC must be a station address (00:11:22:33:44:55) or\n" \
" -b Send wake-up packet to the broadcast address\n" \
" -i iface Use interface ifname instead of the default \"eth0\"\n" \
" -p pass Append the four or six byte password PW to the packet"
" -b Send wake-up packet to the broadcast address\n" \
" -i iface Use interface ifname instead of the default \"eth0\"\n" \
" -p pass Append the four or six byte password PW to the packet"
"EXPRESSION may be:\n" \
" ARG1 | ARG2 ARG1 if it is neither null nor 0, otherwise ARG2\n" \
" ARG1 & ARG2 ARG1 if neither argument is null or 0, otherwise 0\n" \
"EXPRESSION may be:\n" \
" ARG1 | ARG2 ARG1 if it is neither null nor 0, otherwise ARG2\n" \
" ARG1 & ARG2 ARG1 if neither argument is null or 0, otherwise 0\n" \
" ARG1 != ARG2 ARG1 is unequal to ARG2\n" \
" ARG1 >= ARG2 ARG1 is greater than or equal to ARG2\n" \
" ARG1 > ARG2 ARG1 is greater than ARG2\n" \
" ARG1 != ARG2 ARG1 is unequal to ARG2\n" \
" ARG1 >= ARG2 ARG1 is greater than or equal to ARG2\n" \
" ARG1 > ARG2 ARG1 is greater than ARG2\n" \
- " ARG1 + ARG2 arithmetic sum of ARG1 and ARG2\n" \
- " ARG1 - ARG2 arithmetic difference of ARG1 and ARG2\n" \
- " ARG1 * ARG2 arithmetic product of ARG1 and ARG2\n" \
- " ARG1 / ARG2 arithmetic quotient of ARG1 divided by ARG2\n" \
- " ARG1 % ARG2 arithmetic remainder of ARG1 divided by ARG2\n" \
- " STRING : REGEXP anchored pattern match of REGEXP in STRING\n" \
- " match STRING REGEXP same as STRING : REGEXP\n" \
- " substr STRING POS LENGTH substring of STRING, POS counted from 1\n" \
- " index STRING CHARS index in STRING where any CHARS is found, or 0\n" \
- " length STRING length of STRING\n" \
- " quote TOKEN interpret TOKEN as a string, even if\n" \
+ " ARG1 + ARG2 Sum of ARG1 and ARG2\n" \
+ " ARG1 - ARG2 Difference of ARG1 and ARG2\n" \
+ " ARG1 * ARG2 Product of ARG1 and ARG2\n" \
+ " ARG1 / ARG2 Quotient of ARG1 divided by ARG2\n" \
+ " ARG1 % ARG2 Remainder of ARG1 divided by ARG2\n" \
+ " STRING : REGEXP Anchored pattern match of REGEXP in STRING\n" \
+ " match STRING REGEXP Same as STRING : REGEXP\n" \
+ " substr STRING POS LENGTH Substring of STRING, POS counted from 1\n" \
+ " index STRING CHARS Index in STRING where any CHARS is found, or 0\n" \
+ " length STRING Length of STRING\n" \
+ " quote TOKEN Interpret TOKEN as a string, even if\n" \
"Beware that many operators need to be escaped or quoted for shells.\n" \
"Comparisons are arithmetic if both ARGs are numbers, else\n" \
"lexicographical. Pattern matches return the string matched between\n" \
"Beware that many operators need to be escaped or quoted for shells.\n" \
"Comparisons are arithmetic if both ARGs are numbers, else\n" \
"lexicographical. Pattern matches return the string matched between\n" \
" -b Bind to ip address\n" \
" STRING The ident answer string (default is nobody)"
#define false_trivial_usage \
""
#define false_full_usage \
" -b Bind to ip address\n" \
" STRING The ident answer string (default is nobody)"
#define false_trivial_usage \
""
#define false_full_usage \
" -n Don't verify after format"
#define fdisk_trivial_usage \
"[-luv] [-C CYLINDERS] [-H HEADS] [-S SECTORS] [-b SSZ] DISK"
#define fdisk_full_usage \
" -n Don't verify after format"
#define fdisk_trivial_usage \
"[-luv] [-C CYLINDERS] [-H HEADS] [-S SECTORS] [-b SSZ] DISK"
#define fdisk_full_usage \
" -l List partition table(s)\n" \
" -u Give Start and End in sector (instead of cylinder) units\n" \
" -s PARTITION Give partition size(s) in blocks\n" \
" -l List partition table(s)\n" \
" -u Give Start and End in sector (instead of cylinder) units\n" \
" -s PARTITION Give partition size(s) in blocks\n" \
) USE_FEATURE_FIND_MMIN( \
"\n -mmin MINS Modified time is greater than (+N); less than (-N);" \
"\n or exactly (N) minutes" \
) USE_FEATURE_FIND_MMIN( \
"\n -mmin MINS Modified time is greater than (+N); less than (-N);" \
"\n or exactly (N) minutes" \
"[-bs] [-w WIDTH] [FILE]"
#define fold_full_usage \
"Wrap input lines in each FILE (standard input by default), writing to\n" \
"[-bs] [-w WIDTH] [FILE]"
#define fold_full_usage \
"Wrap input lines in each FILE (standard input by default), writing to\n" \
- "standard output.\n\n" \
- "Options:\n" \
- " -b count bytes rather than columns\n" \
- " -s break at spaces\n" \
- " -w use WIDTH columns instead of 80"
+ "standard output" \
+ "\n\nOptions:\n" \
+ " -b Count bytes rather than columns\n" \
+ " -s Break at spaces\n" \
+ " -w Use WIDTH columns instead of 80"
#define freeramdisk_example_usage \
"$ freeramdisk /dev/ram2\n"
#define fsck_trivial_usage \
#define freeramdisk_example_usage \
"$ freeramdisk /dev/ram2\n"
#define fsck_trivial_usage \
" -A Walk /etc/fstab and check all filesystems\n" \
" -N Don't execute, just show what would be done\n" \
" -P When using -A, check filesystems in parallel\n" \
" -R When using -A, skip the root filesystem\n" \
" -T Don't show title on startup\n" \
" -A Walk /etc/fstab and check all filesystems\n" \
" -N Don't execute, just show what would be done\n" \
" -P When using -A, check filesystems in parallel\n" \
" -R When using -A, skip the root filesystem\n" \
" -T Don't show title on startup\n" \
" -l Lists all filenames\n" \
" -r Perform interactive repairs\n" \
" -a Perform automatic repairs\n" \
" -l Lists all filenames\n" \
" -r Perform interactive repairs\n" \
" -a Perform automatic repairs\n" \
" -s Outputs super-block information\n" \
" -m Activates MINIX-like \"mode not cleared\" warnings\n" \
" -f Force file system check"
" -s Outputs super-block information\n" \
" -m Activates MINIX-like \"mode not cleared\" warnings\n" \
" -f Force file system check"
#define ftpget_trivial_usage \
"[options] remote-host local-file remote-file"
#define ftpget_full_usage \
#define ftpget_trivial_usage \
"[options] remote-host local-file remote-file"
#define ftpget_full_usage \
" -c, --continue Continue a previous transfer\n" \
" -v, --verbose Verbose\n" \
" -u, --username Username to be used\n" \
" -c, --continue Continue a previous transfer\n" \
" -v, --verbose Verbose\n" \
" -u, --username Username to be used\n" \
#define ftpput_trivial_usage \
"[options] remote-host remote-file local-file"
#define ftpput_full_usage \
#define ftpput_trivial_usage \
"[options] remote-host remote-file local-file"
#define ftpput_full_usage \
" -v, --verbose Verbose\n" \
" -u, --username Username to be used\n" \
" -p, --password Password to be used\n" \
" -v, --verbose Verbose\n" \
" -u, --username Username to be used\n" \
" -p, --password Password to be used\n" \
" -4 When using port/proto only search IPv4 space\n" \
" -6 When using port/proto only search IPv6 space\n" \
" -SIGNAL When used with -k, this signal will be used to kill"
" -4 When using port/proto only search IPv4 space\n" \
" -6 When using port/proto only search IPv6 space\n" \
" -SIGNAL When used with -k, this signal will be used to kill"
#define getty_trivial_usage \
"[OPTIONS]... baud_rate,... line [termtype]"
#define getty_full_usage \
#define getty_trivial_usage \
"[OPTIONS]... baud_rate,... line [termtype]"
#define getty_full_usage \
" -h Enable hardware (RTS/CTS) flow control\n" \
" -i Do not display /etc/issue before running login\n" \
" -L Local line, so do not do carrier detect\n" \
" -h Enable hardware (RTS/CTS) flow control\n" \
" -i Do not display /etc/issue before running login\n" \
" -L Local line, so do not do carrier detect\n" \
- "Search for PATTERN in each FILE or standard input.\n\n" \
- "Options:\n" \
- " -H prefix output lines with filename where match was found\n" \
- " -h suppress the prefixing filename on output\n" \
- " -r recurse subdirectories\n" \
- " -i ignore case distinctions\n" \
- " -l list names of files that match\n" \
- " -L list names of files that do not match\n" \
- " -n print line number with output lines\n" \
- " -q be quiet. Returns 0 if PATTERN was found, 1 otherwise\n" \
- " -v select non-matching lines\n" \
- " -s suppress file open/read error messages\n" \
- " -c only print count of matching lines\n" \
- " -f read PATTERN from file\n" \
- " -o show only the part of a line that matches PATTERN\n" \
+ "Search for PATTERN in each FILE or standard input" \
+ "\n\nOptions:\n" \
+ " -H Prefix output lines with filename where match was found\n" \
+ " -h Suppress the prefixing filename on output\n" \
+ " -r Recurse subdirectories\n" \
+ " -i Ignore case distinctions\n" \
+ " -l List names of files that match\n" \
+ " -L List names of files that do not match\n" \
+ " -n Print line number with output lines\n" \
+ " -q Be quiet. Returns 0 if PATTERN was found, 1 otherwise\n" \
+ " -v Select non-matching lines\n" \
+ " -s Suppress file open/read error messages\n" \
+ " -c Only print count of matching lines\n" \
+ " -f Read PATTERN from file\n" \
+ " -o Show only the part of a line that matches PATTERN\n" \
" -e PATTERN is a regular expression\n" \
" -F PATTERN is a set of newline-separated strings" \
USE_FEATURE_GREP_EGREP_ALIAS( \
"\n -E PATTERN is an extended regular expression") \
USE_FEATURE_GREP_CONTEXT( \
" -e PATTERN is a regular expression\n" \
" -F PATTERN is a set of newline-separated strings" \
USE_FEATURE_GREP_EGREP_ALIAS( \
"\n -E PATTERN is an extended regular expression") \
USE_FEATURE_GREP_CONTEXT( \
" -c Write output to standard output\n" \
" -f Force read when source is a terminal\n" \
" -t Test compressed file integrity"
" -c Write output to standard output\n" \
" -f Force read when source is a terminal\n" \
" -t Test compressed file integrity"
#define halt_trivial_usage \
"[-d<delay>] [-n<nosync>] [-f<force>]"
#define halt_full_usage \
#define halt_trivial_usage \
"[-d<delay>] [-n<nosync>] [-f<force>]"
#define halt_full_usage \
- "Halt the system.\n" \
- "Options:\n" \
- " -d delay interval for halting\n" \
- " -n no call to sync()\n" \
- " -f force halt (don't go through init)"
+ "Halt the system" \
+ "\n\nOptions:\n" \
+ " -d Delay interval for halting\n" \
+ " -n No call to sync()\n" \
+ " -f Force halt (don't go through init)"
#define hdparm_trivial_usage \
"[options] [device] .."
#define hdparm_full_usage \
USE_FEATURE_HDPARM_GET_IDENTITY( \
#define hdparm_trivial_usage \
"[options] [device] .."
#define hdparm_full_usage \
USE_FEATURE_HDPARM_GET_IDENTITY( \
- " If no device name is specified try to read from stdin.\n") \
- "\nOptions:\n" \
- " -a get/set fs readahead\n" \
- " -A set drive read-lookahead flag (0/1)\n" \
- " -b get/set bus state (0 == off, 1 == on, 2 == tristate)\n" \
- " -B set Advanced Power Management setting (1-255)\n" \
- " -c get/set IDE 32-bit IO setting\n" \
- " -C check IDE power mode status\n" \
+ "If no device name is specified try to read from stdin.\n\n") \
+ "Options:\n" \
+ " -a Get/set fs readahead\n" \
+ " -A Set drive read-lookahead flag (0/1)\n" \
+ " -b Get/set bus state (0 == off, 1 == on, 2 == tristate)\n" \
+ " -B Set Advanced Power Management setting (1-255)\n" \
+ " -c Get/set IDE 32-bit IO setting\n" \
+ " -C Check IDE power mode status\n" \
- " -d get/set using_dma flag\n") \
- " -D enable/disable drive defect-mgmt\n" \
- " -f flush buffer cache for device on exit\n" \
- " -g display drive geometry\n" \
- " -h display terse usage information\n" \
+ " -d Get/set using_dma flag\n") \
+ " -D Enable/disable drive defect-mgmt\n" \
+ " -f Flush buffer cache for device on exit\n" \
+ " -g Display drive geometry\n" \
+ " -h Display terse usage information\n" \
- " -I detailed/current information directly from drive\n") \
- " -k get/set keep_settings_over_reset flag (0/1)\n" \
- " -K set drive keep_features_over_reset flag (0/1)\n" \
- " -L set drive doorlock (0/1) (removable harddisks only)\n" \
- " -m get/set multiple sector count\n" \
- " -n get/set ignore-write-errors flag (0/1)\n" \
- " -p set PIO mode on IDE interface chipset (0,1,2,3,4,...)\n" \
- " -P set drive prefetch count\n" \
- " -q change next setting quietly\n" \
- " -Q get/set DMA tagged-queuing depth (if supported)\n" \
- " -r get/set readonly flag (DANGEROUS to set)\n" \
+ " -I Detailed/current information directly from drive\n") \
+ " -k Get/set keep_settings_over_reset flag (0/1)\n" \
+ " -K Set drive keep_features_over_reset flag (0/1)\n" \
+ " -L Set drive doorlock (0/1) (removable harddisks only)\n" \
+ " -m Get/set multiple sector count\n" \
+ " -n Get/set ignore-write-errors flag (0/1)\n" \
+ " -p Set PIO mode on IDE interface chipset (0,1,2,3,4,...)\n" \
+ " -P Set drive prefetch count\n" \
+ " -q Change next setting quietly\n" \
+ " -Q Get/set DMA tagged-queuing depth (if supported)\n" \
+ " -r Get/set readonly flag (DANGEROUS to set)\n" \
- " -R register an IDE interface (DANGEROUS)\n") \
- " -S set standby (spindown) timeout\n" \
- " -t perform device read timings\n" \
- " -T perform cache read timings\n" \
- " -u get/set unmaskirq flag (0/1)\n" \
+ " -R Register an IDE interface (DANGEROUS)\n") \
+ " -S Set standby (spindown) timeout\n" \
+ " -t Perform device read timings\n" \
+ " -T Perform cache read timings\n" \
+ " -u Get/set unmaskirq flag (0/1)\n" \
- " -U un-register an IDE interface (DANGEROUS)\n") \
- " -v defaults; same as -mcudkrag for IDE drives\n" \
- " -V display program version and exit immediately\n" \
+ " -U Un-register an IDE interface (DANGEROUS)\n") \
+ " -v Defaults; same as -mcudkrag for IDE drives\n" \
+ " -V Display program version and exit immediately\n" \
- " -x tristate device for hotswap (0/1) (DANGEROUS)\n") \
- " -X set IDE xfer mode (DANGEROUS)\n" \
- " -y put IDE drive in standby mode\n" \
- " -Y put IDE drive to sleep\n" \
- " -Z disable Seagate auto-powersaving mode\n" \
- " -z re-read partition table"
+ " -x Tristate device for hotswap (0/1) (DANGEROUS)\n") \
+ " -X Set IDE xfer mode (DANGEROUS)\n" \
+ " -y Put IDE drive in standby mode\n" \
+ " -Y Put IDE drive to sleep\n" \
+ " -Z Disable Seagate auto-powersaving mode\n" \
+ " -z Re-read partition table"
#define head_trivial_usage \
"[OPTION]... [FILE]..."
#define head_full_usage \
"Print first 10 lines of each FILE to standard output.\n" \
"With more than one FILE, precede each with a header giving the\n" \
#define head_trivial_usage \
"[OPTION]... [FILE]..."
#define head_full_usage \
"Print first 10 lines of each FILE to standard output.\n" \
"With more than one FILE, precede each with a header giving the\n" \
- "\n -c NUM output the first NUM bytes" \
- "\n -q never output headers giving file names" \
- "\n -v always output headers giving file names")
+ "\n -c NUM Output the first NUM bytes" \
+ "\n -q Never output headers giving file names" \
+ "\n -v Always output headers giving file names")
#define head_example_usage \
"$ head -n 2 /etc/passwd\n" \
"root:x:0:0:root:/root:/bin/bash\n" \
#define head_example_usage \
"$ head -n 2 /etc/passwd\n" \
"root:x:0:0:root:/root:/bin/bash\n" \
#define hexdump_trivial_usage \
"[-[bcCdefnosvx]] [OPTION] FILE"
#define hexdump_full_usage \
#define hexdump_trivial_usage \
"[-[bcCdefnosvx]] [OPTION] FILE"
#define hexdump_full_usage \
" -b One-byte octal display\n" \
" -c One-byte character display\n" \
" -C Canonical hex+ASCII, 16 bytes per line\n" \
" -b One-byte octal display\n" \
" -c One-byte character display\n" \
" -C Canonical hex+ASCII, 16 bytes per line\n" \
" -x Two-byte hexadecimal display"
#define hostid_trivial_usage \
""
#define hostid_full_usage \
" -x Two-byte hexadecimal display"
#define hostid_trivial_usage \
""
#define hostid_full_usage \
#define hostname_trivial_usage \
"[OPTION] {hostname | -F FILE}"
#define hostname_full_usage \
"Get or set the hostname or DNS domain name. If a hostname is given\n" \
#define hostname_trivial_usage \
"[OPTION] {hostname | -F FILE}"
#define hostname_full_usage \
"Get or set the hostname or DNS domain name. If a hostname is given\n" \
" -c FILE Specifies configuration file. (default httpd.conf)\n" \
" -p PORT Server port (default 80)\n" \
" -i Assume that we are started from inetd\n" \
" -c FILE Specifies configuration file. (default httpd.conf)\n" \
" -p PORT Server port (default 80)\n" \
" -i Assume that we are started from inetd\n" \
#define hwclock_trivial_usage \
"[-r|--show] [-s|--hctosys] [-w|--systohc] [-l|--localtime] [-u|--utc]"
#define hwclock_full_usage \
#define hwclock_trivial_usage \
"[-r|--show] [-s|--hctosys] [-w|--systohc] [-l|--localtime] [-u|--utc]"
#define hwclock_full_usage \
- "Query and set the hardware clock (RTC)\n\n" \
- "Options:\n" \
- " -r read hardware clock and print result\n" \
- " -s set the system time from the hardware clock\n" \
- " -w set the hardware clock to the current system time\n" \
- " -u the hardware clock is kept in coordinated universal time\n" \
- " -l the hardware clock is kept in local time"
+ "Query and set the hardware clock (RTC)" \
+ "\n\nOptions:\n" \
+ " -r Read hardware clock and print result\n" \
+ " -s Set the system time from the hardware clock\n" \
+ " -w Set the hardware clock to the current system time\n" \
+ " -u The hardware clock is kept in coordinated universal time\n" \
+ " -l The hardware clock is kept in local time"
- " -c prints only the security context\n") \
- " -g prints only the group ID\n" \
- " -u prints only the user ID\n" \
- " -n print a name instead of a number\n" \
- " -r prints the real user ID instead of the effective ID"
+ " -c Prints only the security context\n") \
+ " -g Prints only the group ID\n" \
+ " -u Prints only the user ID\n" \
+ " -n Print a name instead of a number\n" \
+ " -r Prints the real user ID instead of the effective ID"
#define ifconfig_trivial_usage \
USE_FEATURE_IFCONFIG_STATUS("[-a]") " <interface> [<address>]"
#define ifconfig_full_usage \
#define ifconfig_trivial_usage \
USE_FEATURE_IFCONFIG_STATUS("[-a]") " <interface> [<address>]"
#define ifconfig_full_usage \
- " -h this help\n" \
- " -a de/configure all interfaces automatically\n" \
- " -i FILE use FILE for interface definitions\n" \
- " -n print out what would happen, but don't do it\n" \
+ " -a De/configure all interfaces automatically\n" \
+ " -i FILE Use FILE for interface definitions\n" \
+ " -n Print out what would happen, but don't do it\n" \
- " -v print out what would happen before doing it\n" \
- " -m don't run any mappings\n" \
- " -f force de/configuration"
+ " -v Print out what would happen before doing it\n" \
+ " -m Don't run any mappings\n" \
+ " -f Force de/configuration"
- " -h this help\n" \
- " -a de/configure all interfaces automatically\n" \
- " -i FILE use FILE for interface definitions\n" \
- " -n print out what would happen, but don't do it\n" \
+ " -a De/configure all interfaces automatically\n" \
+ " -i FILE Use FILE for interface definitions\n" \
+ " -n Print out what would happen, but don't do it\n" \
- " -v print out what would happen before doing it\n" \
- " -m don't run any mappings\n" \
- " -f force de/configuration"
+ " -v Print out what would happen before doing it\n" \
+ " -m Don't run any mappings\n" \
+ " -f Force de/configuration"
" -q Sets the size of the socket listen queue to\n" \
" the specified value. Default is 128"
#define init_trivial_usage \
""
#define init_full_usage \
" -q Sets the size of the socket listen queue to\n" \
" the specified value. Default is 128"
#define init_trivial_usage \
""
#define init_full_usage \
" 'sysinit' is the first item run on boot. init waits until all\n" \
" sysinit actions are completed before continuing. Following the\n" \
" completion of all sysinit actions, all 'wait' actions are run.\n" \
" 'sysinit' is the first item run on boot. init waits until all\n" \
" sysinit actions are completed before continuing. Following the\n" \
" completion of all sysinit actions, all 'wait' actions are run.\n" \
" the specified task completes. 'once' actions are asynchronous,\n" \
" therefore, init does not wait for them to complete. 'restart' is\n" \
" the action taken to restart the init process. By default this should\n" \
" simply run /sbin/init, but can be a script which runs pivot_root or it\n" \
" can do all sorts of other interesting things. The 'ctrlaltdel' init\n" \
" actions are run when the system detects that someone on the system\n" \
" the specified task completes. 'once' actions are asynchronous,\n" \
" therefore, init does not wait for them to complete. 'restart' is\n" \
" the action taken to restart the init process. By default this should\n" \
" simply run /sbin/init, but can be a script which runs pivot_root or it\n" \
" can do all sorts of other interesting things. The 'ctrlaltdel' init\n" \
" actions are run when the system detects that someone on the system\n" \
#define insmod_trivial_usage \
"[OPTION]... MODULE [symbol=value]..."
#define insmod_full_usage \
#define insmod_trivial_usage \
"[OPTION]... MODULE [symbol=value]..."
#define insmod_full_usage \
" -L Lock to prevent simultaneous loads of a module\n" \
USE_FEATURE_INSMOD_LOAD_MAP( \
" -m Output load map to stdout\n") \
" -o NAME Set internal module name to NAME\n" \
" -L Lock to prevent simultaneous loads of a module\n" \
USE_FEATURE_INSMOD_LOAD_MAP( \
" -m Output load map to stdout\n") \
" -o NAME Set internal module name to NAME\n" \
#define install_trivial_usage \
"[-cgmops] [sources] <dest|directory>"
#define install_full_usage \
#define install_trivial_usage \
"[-cgmops] [sources] <dest|directory>"
#define install_full_usage \
- "Copies files and set attributes\n\n" \
- "Options:\n" \
- " -c copy the file, default\n" \
- " -d create directories\n" \
- " -g set group ownership\n" \
- " -m set permission modes\n" \
- " -o set ownership\n" \
- " -p preserve date\n" \
- " -s strip symbol tables"
+ "Copy files and set attributes" \
+ "\n\nOptions:\n" \
+ " -c Copy the file, default\n" \
+ " -d Create directories\n" \
+ " -g Set group ownership\n" \
+ " -m Set permission modes\n" \
+ " -o Set ownership\n" \
+ " -p Preserve date\n" \
+ " -s Strip symbol tables"
#define ipcalc_trivial_usage \
"[OPTION]... <ADDRESS>[[/]<NETMASK>] [NETMASK]"
#define ipcalc_full_usage \
#define ipcalc_trivial_usage \
"[OPTION]... <ADDRESS>[[/]<NETMASK>] [NETMASK]"
#define ipcalc_full_usage \
- "Calculate IP network settings from a IP address\n\n" \
- "Options:\n" \
- " -b --broadcast Display calculated broadcast address\n" \
- " -n --network Display calculated network address\n" \
- " -m --netmask Display default netmask for IP" \
+ "Calculate IP network settings from a IP address" \
+ "\n\nOptions:" \
+ "\n -b --broadcast Display calculated broadcast address" \
+ "\n -n --network Display calculated network address" \
+ "\n -m --netmask Display default netmask for IP" \
- "\n -p --prefix Display the prefix for IP/NETMASK\n" \
- " -h --hostname Display first resolved host name\n" \
- " -s --silent Don't ever display error messages")
+ "\n -p --prefix Display the prefix for IP/NETMASK" \
+ "\n -h --hostname Display first resolved host name" \
+ "\n -s --silent Don't ever display error messages")
"The upper-case options MQS are used to remove a shared memory segment by a\n" \
"segment by a shmkey value. The lower-case options mqs are used\n" \
"to remove a segment by shmid value.\n" \
"The upper-case options MQS are used to remove a shared memory segment by a\n" \
"segment by a shmkey value. The lower-case options mqs are used\n" \
"to remove a segment by shmid value.\n" \
" -[mM] Remove the memory segment after the last detach\n" \
" -[qQ] Remove the message queue\n" \
" -[sS] Remove the semaphore"
" -[mM] Remove the memory segment after the last detach\n" \
" -[qQ] Remove the message queue\n" \
" -[sS] Remove the semaphore"
#define ipcs_trivial_usage \
"[[-smq] -i shmid] | [[-asmq] [-tcplu]]"
#define ipcs_full_usage \
#define ipcs_trivial_usage \
"[[-smq] -i shmid] | [[-asmq] [-tcplu]]"
#define ipcs_full_usage \
- " -m shared memory segments\n" \
- " -q message queues\n" \
- " -s semaphore arrays\n" \
- " -a all (default)\n" \
+ " -m Shared memory segments\n" \
+ " -q Message queues\n" \
+ " -s Semaphore arrays\n" \
+ " -a All (default)\n" \
"iproute { list | flush } SELECTOR\n" \
"iproute get ADDRESS [ from ADDRESS iif STRING ]\n" \
" [ oif STRING ] [ tos TOS ]\n" \
"iproute { list | flush } SELECTOR\n" \
"iproute get ADDRESS [ from ADDRESS iif STRING ]\n" \
" [ oif STRING ] [ tos TOS ]\n" \
#define kill_trivial_usage \
"[-l] [-signal] process-id [process-id ...]"
#define kill_full_usage \
#define kill_trivial_usage \
"[-l] [-signal] process-id [process-id ...]"
#define kill_full_usage \
#define killall_trivial_usage \
"[-l] [-q] [-signal] process-name [process-name ...]"
#define killall_full_usage \
#define killall_trivial_usage \
"[-l] [-q] [-signal] process-name [process-name ...]"
#define killall_full_usage \
" -l List all signal names and numbers\n" \
" -q Do not complain if no processes were killed"
#define killall_example_usage \
" -l List all signal names and numbers\n" \
" -q Do not complain if no processes were killed"
#define killall_example_usage \
" -l List all signal names and numbers\n" \
#define klogd_trivial_usage \
"[-c n] [-n]"
#define klogd_full_usage \
" -l List all signal names and numbers\n" \
#define klogd_trivial_usage \
"[-c n] [-n]"
#define klogd_full_usage \
"[-EMNmh~?] FILE1 FILE2..."
#define less_full_usage \
"View a file or list of files. The position within files can be\n" \
"[-EMNmh~?] FILE1 FILE2..."
#define less_full_usage \
"View a file or list of files. The position within files can be\n" \
" -E Quit once the end of a file is reached\n" \
" -M Display a status line containing the current line numbers\n" \
" and the percentage through the file\n" \
" -E Quit once the end of a file is reached\n" \
" -M Display a status line containing the current line numbers\n" \
" and the percentage through the file\n" \
#define setarch_trivial_usage \
"<personality> <program> [args ...]"
#define setarch_full_usage \
"Personality may be:\n" \
#define setarch_trivial_usage \
"<personality> <program> [args ...]"
#define setarch_full_usage \
"Personality may be:\n" \
- "Create a link named LINK_NAME or DIRECTORY to the specified TARGET\n" \
- "\nYou may use '--' to indicate that all following arguments are non-options.\n\n" \
- "Options:\n" \
- " -s make symbolic links instead of hard links\n" \
- " -f remove existing destination files\n" \
- " -n no dereference symlinks - treat like normal file\n" \
- " -b make a backup of the target (if exists) before link operation\n" \
- " -S suffix use suffix instead of ~ when making backup files"
+ "Create a link named LINK_NAME or DIRECTORY to the specified TARGET.\n" \
+ "You may use '--' to indicate that all following arguments are non-options." \
+ "\n\nOptions:\n" \
+ " -s Make symbolic links instead of hard links\n" \
+ " -f Remove existing destination files\n" \
+ " -n No dereference symlinks - treat like normal file\n" \
+ " -b Make a backup of the target (if exists) before link operation\n" \
+ " -S suf Use suffix instead of ~ when making backup files"
#define loadfont_example_usage \
"$ loadfont < /etc/i18n/fontname\n"
#define loadkmap_trivial_usage \
"< keymap"
#define loadkmap_full_usage \
#define loadfont_example_usage \
"$ loadfont < /etc/i18n/fontname\n"
#define loadkmap_trivial_usage \
"< keymap"
#define loadkmap_full_usage \
#define loadkmap_example_usage \
"$ loadkmap < /etc/i18n/lang-keymap\n"
#define logger_trivial_usage \
"[OPTION]... [MESSAGE]"
#define logger_full_usage \
#define loadkmap_example_usage \
"$ loadkmap < /etc/i18n/lang-keymap\n"
#define logger_trivial_usage \
"[OPTION]... [MESSAGE]"
#define logger_full_usage \
#define logger_example_usage \
"$ logger \"hello\"\n"
#define login_trivial_usage \
"[OPTION]... [username] [ENV=VAR ...]"
#define login_full_usage \
#define logger_example_usage \
"$ logger \"hello\"\n"
#define login_trivial_usage \
"[OPTION]... [username] [ENV=VAR ...]"
#define login_full_usage \
" -f Do not authenticate (user already authenticated)\n" \
" -h Name of the remote host for this login\n" \
" -p Preserve environment"
" -f Do not authenticate (user already authenticated)\n" \
" -h Name of the remote host for this login\n" \
" -p Preserve environment"
#define losetup_trivial_usage \
"[-o OFFSET] [-d] LOOPDEVICE [FILE]]"
#define losetup_full_usage \
#define losetup_trivial_usage \
"[-o OFFSET] [-d] LOOPDEVICE [FILE]]"
#define losetup_full_usage \
" -d Disassociate LOOPDEVICE\n" \
" -o OFFSET Start OFFSET bytes into FILE"
#define losetup_notes_usage \
" -d Disassociate LOOPDEVICE\n" \
" -o OFFSET Start OFFSET bytes into FILE"
#define losetup_notes_usage \
- "List directory contents\n\n" \
- "Options:" \
- "\n -1 list files in a single column" \
- "\n -A do not list implied . and .." \
- "\n -a do not hide entries starting with ." \
- "\n -C list entries by columns" \
+ "List directory contents" \
+ "\n\nOptions:" \
+ "\n -1 List files in a single column" \
+ "\n -A Do not list implied . and .." \
+ "\n -a Do not hide entries starting with ." \
+ "\n -C List entries by columns" \
- "\n --color[={always,never,auto}] control coloring") \
- "\n -d list directory entries instead of contents" \
+ "\n --color[={always,never,auto}] Control coloring") \
+ "\n -d List directory entries instead of contents" \
- "\n -F append indicator (one of */=@|) to entries") \
- "\n -i list the i-node for each file" \
- "\n -l use a long listing format" \
- "\n -n list numeric UIDs and GIDs instead of names" \
+ "\n -F Append indicator (one of */=@|) to entries") \
+ "\n -i List the i-node for each file" \
+ "\n -l Use a long listing format" \
+ "\n -n List numeric UIDs and GIDs instead of names" \
- "list file attributes on an ext2 fs\n\n" \
- "Options:\n" \
- " -R recursively list subdirectories\n" \
- " -a do not hide entries starting with .\n" \
- " -d list directory entries instead of contents\n" \
- " -l print long flag names\n" \
- " -v list the file's version/generation number"
+ "List file attributes on an ext2 fs" \
+ "\n\nOptions:\n" \
+ " -R Recursively list subdirectories\n" \
+ " -a Do not hide entries starting with .\n" \
+ " -d List directory entries instead of contents\n" \
+ " -l Print long flag names\n" \
+ " -v List the file's version/generation number"
#ifdef CONFIG_FEATURE_MAKEDEVS_LEAF
#define makedevs_trivial_usage \
"NAME TYPE MAJOR MINOR FIRST LAST [s]"
#define makedevs_full_usage \
#ifdef CONFIG_FEATURE_MAKEDEVS_LEAF
#define makedevs_trivial_usage \
"NAME TYPE MAJOR MINOR FIRST LAST [s]"
#define makedevs_full_usage \
- " b: Make a block (buffered) device.\n" \
- " c or u: Make a character (un-buffered) device.\n" \
- " p: Make a named pipe. MAJOR and MINOR are ignored for named pipes.\n\n" \
+ " b: Make a block (buffered) device\n" \
+ " c or u: Make a character (un-buffered) device\n" \
+ " p: Make a named pipe. MAJOR and MINOR are ignored for named pipes\n" \
+ "\n" \
"FIRST specifies the number appended to NAME to create the first device.\n" \
"LAST specifies the number of the last item that should be created\n" \
"If 's' is the last argument, the base device is created as well.\n\n" \
"FIRST specifies the number appended to NAME to create the first device.\n" \
"LAST specifies the number of the last item that should be created\n" \
"If 's' is the last argument, the base device is created as well.\n\n" \
#define makedevs_trivial_usage \
"[-d device_table] rootdir"
#define makedevs_full_usage \
#define makedevs_trivial_usage \
"[-d device_table] rootdir"
#define makedevs_full_usage \
- "Where name is the file name, type can be one of:\n" \
- " f A regular file\n" \
- " d Directory\n" \
- " c Character special device file\n" \
- " b Block special device file\n" \
- " p Fifo (named pipe)\n" \
+ "Where name is the file name, type can be one of:\n" \
+ " f A regular file\n" \
+ " d Directory\n" \
+ " c Character special device file\n" \
+ " b Block special device file\n" \
+ " p Fifo (named pipe)\n" \
"uid is the user id for the target file, gid is the group id for the\n" \
"target file. The rest of the entries (major, minor, etc) apply to\n" \
"to device special files. A '-' may be used for blank entries."
"uid is the user id for the target file, gid is the group id for the\n" \
"target file. The rest of the entries (major, minor, etc) apply to\n" \
"to device special files. A '-' may be used for blank entries."
"With no FILE, or when FILE is -, read standard input." \
USE_FEATURE_MD5_SHA1_SUM_CHECK("\n\n" \
"With no FILE, or when FILE is -, read standard input." \
USE_FEATURE_MD5_SHA1_SUM_CHECK("\n\n" \
" y Allow write access to your terminal\n" \
" n Disallow write access to your terminal"
#define mkdir_trivial_usage \
"[OPTION] DIRECTORY..."
#define mkdir_full_usage \
" y Allow write access to your terminal\n" \
" n Disallow write access to your terminal"
#define mkdir_trivial_usage \
"[OPTION] DIRECTORY..."
#define mkdir_full_usage \
- "Create the DIRECTORY(ies) if they do not already exist\n\n" \
- "Options:\n" \
- " -m set permission mode (as in chmod), not rwxrwxrwx - umask\n" \
- " -p no error if existing, make parent directories as needed"
+ "Create the DIRECTORY(ies) if they do not already exist" \
+ "\n\nOptions:\n" \
+ " -m Set permission mode (as in chmod), not rwxrwxrwx - umask\n" \
+ " -p No error if existing, make parent directories as needed"
- " -b size block size in bytes\n" \
- " -c check for bad blocks before creating\n" \
- " -E opts set extended options\n" \
- " -f size fragment size in bytes\n" \
- " -F force (ignore sanity checks)\n" \
- " -g num number of blocks in a block group\n" \
- " -i ratio the bytes/inode ratio\n" \
- " -j create a journal (ext3)\n" \
- " -J opts set journal options (size/device)\n" \
- " -l file read bad blocks list from file\n" \
- " -L lbl set the volume label\n" \
- " -m percent percent of fs blocks to reserve for admin\n" \
- " -M dir set last mounted directory\n" \
- " -n do not actually create anything\n" \
- " -N num number of inodes to create\n" \
- " -o os set the 'creator os' field\n" \
- " -O features dir_index/filetype/has_journal/journal_dev/sparse_super\n" \
- " -q quiet execution\n" \
- " -r rev set filesystem revision\n" \
- " -S write superblock and group descriptors only\n" \
- " -T fs-type set usage type (news/largefile/largefile4)\n" \
- " -v verbose execution"
+ " -b size Block size in bytes\n" \
+ " -c Check for bad blocks before creating\n" \
+ " -E opts Set extended options\n" \
+ " -f size Fragment size in bytes\n" \
+ " -F Force (ignore sanity checks)\n" \
+ " -g num Number of blocks in a block group\n" \
+ " -i ratio The bytes/inode ratio\n" \
+ " -j Create a journal (ext3)\n" \
+ " -J opts Set journal options (size/device)\n" \
+ " -l file Read bad blocks list from file\n" \
+ " -L lbl Set the volume label\n" \
+ " -m percent Percent of fs blocks to reserve for admin\n" \
+ " -M dir Set last mounted directory\n" \
+ " -n Do not actually create anything\n" \
+ " -N num Number of inodes to create\n" \
+ " -o os Set the 'creator os' field\n" \
+ " -O features Dir_index/filetype/has_journal/journal_dev/sparse_super\n" \
+ " -q Quiet execution\n" \
+ " -r rev Set filesystem revision\n" \
+ " -S Write superblock and group descriptors only\n" \
+ " -T fs-type Set usage type (news/largefile/largefile4)\n" \
+ " -v Verbose execution"
#define mkfs_minix_trivial_usage \
"[-c | -l filename] [-nXX] [-iXX] /dev/name [blocks]"
#define mkfs_minix_full_usage \
#define mkfs_minix_trivial_usage \
"[-c | -l filename] [-nXX] [-iXX] /dev/name [blocks]"
#define mkfs_minix_full_usage \
" -c Check the device for bad blocks\n" \
" -n [14|30] Specify the maximum length of filenames\n" \
" -i INODES Specify the number of inodes for the filesystem\n" \
" -c Check the device for bad blocks\n" \
" -n [14|30] Specify the maximum length of filenames\n" \
" -i INODES Specify the number of inodes for the filesystem\n" \
#define mknod_trivial_usage \
"[OPTIONS] NAME TYPE MAJOR MINOR"
#define mknod_full_usage \
#define mknod_trivial_usage \
"[OPTIONS] NAME TYPE MAJOR MINOR"
#define mknod_full_usage \
- "Create a special file (block, character, or pipe).\n\n" \
- "Options:\n" \
- " -m create the special file using the specified mode (default a=rw)\n\n" \
- "TYPEs include:\n" \
+ "Create a special file (block, character, or pipe)" \
+ "\n\nOptions:\n" \
+ " -m Create the special file using the specified mode (default a=rw)" \
+ "\n\nTYPEs include:\n" \
" b: Make a block (buffered) device\n" \
" c or u: Make a character (un-buffered) device\n" \
" p: Make a named pipe. MAJOR and MINOR are ignored for named pipes"
" b: Make a block (buffered) device\n" \
" c or u: Make a character (un-buffered) device\n" \
" p: Make a named pipe. MAJOR and MINOR are ignored for named pipes"
#define mkswap_trivial_usage \
"[-c] [-v0|-v1] device [block-count]"
#define mkswap_full_usage \
#define mkswap_trivial_usage \
"[-c] [-v0|-v1] device [block-count]"
#define mkswap_full_usage \
- "Prepare a disk partition to be used as a swap partition.\n\n" \
- "Options:\n" \
- " -c Check for read-ability\n" \
- " -v0 Make version 0 swap [max 128 Megs]\n" \
- " -v1 Make version 1 swap [big!] (default for kernels > 2.1.117)\n" \
+ "Prepare a disk partition to be used as swap partition" \
+ "\n\nOptions:\n" \
+ " -c Check for read-ability\n" \
+ " -v0 Make version 0 swap [max 128 Megs]\n" \
+ " -v1 Make version 1 swap [big!] (default for kernels > 2.1.117)\n" \
" block-count Number of block to use (default is entire partition)"
#define mktemp_trivial_usage \
"[-dq] TEMPLATE"
#define mktemp_full_usage \
" block-count Number of block to use (default is entire partition)"
#define mktemp_trivial_usage \
"[-dq] TEMPLATE"
#define mktemp_full_usage \
" -d Make a directory instead of a file\n" \
" -q Fail silently if an error occurs"
#define mktemp_example_usage \
" -d Make a directory instead of a file\n" \
" -q Fail silently if an error occurs"
#define mktemp_example_usage \
#define more_example_usage \
"$ dmesg | more\n"
#define mount_trivial_usage \
"[flags] DEVICE NODE [-o options,more-options]"
#define mount_full_usage \
#define more_example_usage \
"$ dmesg | more\n"
#define mount_trivial_usage \
"[flags] DEVICE NODE [-o options,more-options]"
#define mount_full_usage \
- " -o option: One of many filesystem options, listed below\n" \
- " -r: Mount the filesystem read-only\n" \
- " -t fs-type: Specify the filesystem type\n" \
- " -w: Mount for reading and writing (default)\n" \
+ " -o option One of many filesystem options, listed below\n" \
+ " -r Mount the filesystem read-only\n" \
+ " -t fs-type Specify the filesystem type\n" \
+ " -w Mount for reading and writing (default)\n" \
- " [a]sync: Writes are asynchronous / synchronous\n" \
- " [no]atime: Disable / enable updates to inode access times\n" \
- " [no]diratime: Disable / enable atime updates to directories\n" \
- " [no]dev: Allow use of special device files / disallow them\n" \
- " [no]exec: Allow use of executable files / disallow them\n" \
- " [no]suid: Allow set-user-id-root programs / disallow them\n" \
- " [r]shared: Convert [recursively] to a shared subtree.\n" \
- " [r]slave: Convert [recursively] to a slave subtree.\n" \
- " [r]private: Convert [recursively] to a private subtree\n" \
- " [un]bindable: Make mount point [un]able to be bind mounted.\n" \
- " bind: Bind a directory to an additional location\n" \
- " move: Relocate an existing mount point.\n" \
+ " [a]sync Writes are asynchronous / synchronous\n" \
+ " [no]atime Disable / enable updates to inode access times\n" \
+ " [no]diratime Disable / enable atime updates to directories\n" \
+ " [no]dev Allow use of special device files / disallow them\n" \
+ " [no]exec Allow use of executable files / disallow them\n" \
+ " [no]suid Allow set-user-id-root programs / disallow them\n" \
+ " [r]shared Convert [recursively] to a shared subtree\n" \
+ " [r]slave Convert [recursively] to a slave subtree\n" \
+ " [r]private Convert [recursively] to a private subtree\n" \
+ " [un]bindable Make mount point [un]able to be bind mounted\n" \
+ " bind Bind a directory to an additional location\n" \
+ " move Relocate an existing mount point\n" \
- " remount: Re-mount a mounted filesystem, changing its flags\n" \
- " ro/rw: Mount for read-only / read-write\n" \
- "\nThere are EVEN MORE flags that are specific to each filesystem\n" \
+ " remount Remount a mounted filesystem, changing its flags\n" \
+ " ro/rw Mount for read-only / read-write\n" \
+ "\n" \
+ "There are EVEN MORE flags that are specific to each filesystem\n" \
#define mountpoint_trivial_usage \
"[-q] <[-d] DIR | -x DEVICE>"
#define mountpoint_full_usage \
#define mountpoint_trivial_usage \
"[-q] <[-d] DIR | -x DEVICE>"
#define mountpoint_full_usage \
- "Rename SOURCE to DEST, or move SOURCE(s) to DIRECTORY.\n\n" \
- "Options:\n" \
- " -f don't prompt before overwriting\n" \
- " -i interactive, prompt before overwrite"
+ "Rename SOURCE to DEST, or move SOURCE(s) to DIRECTORY" \
+ "\n\nOptions:\n" \
+ " -f Don't prompt before overwriting\n" \
+ " -i Interactive, prompt before overwrite"
#define mv_example_usage \
"$ mv /tmp/foo /bin/bar\n"
#define nameif_trivial_usage \
"[-s] [-c FILE] [{IFNAME MACADDR}]"
#define nameif_full_usage \
#define mv_example_usage \
"$ mv /tmp/foo /bin/bar\n"
#define nameif_trivial_usage \
"[-s] [-c FILE] [{IFNAME MACADDR}]"
#define nameif_full_usage \
" -c FILE Use configuration file (default is /etc/mactab)\n" \
" -s Use syslog (LOCAL0 facility)\n" \
" IFNAME MACADDR new_interface_name interface_mac_address"
" -c FILE Use configuration file (default is /etc/mactab)\n" \
" -s Use syslog (LOCAL0 facility)\n" \
" IFNAME MACADDR new_interface_name interface_mac_address"
- "\n -e exec rest of command line after connect" \
- "\n -i SECS delay interval for lines sent" \
- "\n -w SECS timeout for connect" \
- "\n -f file use file (ala /dev/ttyS0) instead of network" \
+ "\n -e Exec rest of command line after connect" \
+ "\n -i SECS Delay interval for lines sent" \
+ "\n -w SECS Timeout for connect" \
+ "\n -f file Use file (ala /dev/ttyS0) instead of network" \
- "To use netcat as a terminal emulator on a serial port:\n\n" \
- "$ stty 115200 -F /dev/ttyS0\n" \
- "$ stty raw -echo -ctlecho && nc -f /dev/ttyS0\n" \
- ) ""
+ "To use netcat as a terminal emulator on a serial port:\n\n" \
+ "$ stty 115200 -F /dev/ttyS0\n" \
+ "$ stty raw -echo -ctlecho && nc -f /dev/ttyS0\n" \
+ )
- "Netstat displays Linux networking information.\n\n" \
- "Options:\n" \
- " -l display listening server sockets\n" \
- " -a display all sockets (default: connected)\n" \
- " -e display other/more information\n" \
- " -n don't resolve names\n" \
- " -r display routing table\n" \
- " -t tcp sockets\n" \
- " -u udp sockets\n" \
- " -w raw sockets\n" \
- " -x unix sockets"
+ "Display networking information" \
+ "\n\nOptions:\n" \
+ " -l Display listening server sockets\n" \
+ " -a Display all sockets (default: connected)\n" \
+ " -e Display other/more information\n" \
+ " -n Don't resolve names\n" \
+ " -r Display routing table\n" \
+ " -t Tcp sockets\n" \
+ " -u Udp sockets\n" \
+ " -w Raw sockets\n" \
+ " -x Unix sockets"
#define nice_trivial_usage \
"[-n ADJUST] [COMMAND [ARG] ...]"
#define nice_full_usage \
#define nice_trivial_usage \
"[-n ADJUST] [COMMAND [ARG] ...]"
#define nice_full_usage \
" -n ADJUST Adjust the scheduling priority by ADJUST"
#define nmeter_trivial_usage \
"format_string"
#define nmeter_full_usage \
" -n ADJUST Adjust the scheduling priority by ADJUST"
#define nmeter_trivial_usage \
"format_string"
#define nmeter_full_usage \
- "%[niface] monitor network interface 'iface'\n" \
- "%m monitor allocated memory\n" \
- "%[mf] monitor free memory\n" \
- "%[mt] monitor total memory\n" \
- "%s monitor allocated swap\n" \
- "%f monitor number of used file descriptors\n" \
- "%Ni monitor total/specific IRQ rate\n" \
- "%x monitor context switch rate\n" \
- "%p monitor forks\n" \
- "%[pn] monitor # of processes\n" \
- "%b monitor block io\n" \
- "%Nt show time (with N decimal points)\n" \
- "%Nd milliseconds between updates (default=1000)\n" \
- "%r print <cr> instead of <lf> at EOL"
+ "%[niface] Monitor network interface 'iface'\n" \
+ "%m Monitor allocated memory\n" \
+ "%[mf] Monitor free memory\n" \
+ "%[mt] Monitor total memory\n" \
+ "%s Monitor allocated swap\n" \
+ "%f Monitor number of used file descriptors\n" \
+ "%Ni Monitor total/specific IRQ rate\n" \
+ "%x Monitor context switch rate\n" \
+ "%p Monitor forks\n" \
+ "%[pn] Monitor # of processes\n" \
+ "%b Monitor block io\n" \
+ "%Nt Show time (with N decimal points)\n" \
+ "%Nd Milliseconds between updates (default=1000)\n" \
+ "%r Print <cr> instead of <lf> at EOL"
#define nmeter_example_usage \
"nmeter '%250d%t %20c int %i bio %b mem %m forks%p'"
#define nohup_trivial_usage \
"COMMAND [ARGS]"
#define nohup_full_usage \
#define nmeter_example_usage \
"nmeter '%250d%t %20c int %i bio %b mem %m forks%p'"
#define nohup_trivial_usage \
"COMMAND [ARGS]"
#define nohup_full_usage \
#define nohup_example_usage \
"$ nohup make &"
#define nslookup_trivial_usage \
"[HOST] [SERVER]"
#define nslookup_full_usage \
#define nohup_example_usage \
"$ nohup make &"
#define nslookup_trivial_usage \
"[HOST] [SERVER]"
#define nslookup_full_usage \
"optionally using a specified DNS server"
#define nslookup_example_usage \
"$ nslookup localhost\n" \
"optionally using a specified DNS server"
#define nslookup_example_usage \
"$ nslookup localhost\n" \
" -d Delete the password for the specified user account\n" \
" -l Locks (disables) the specified user account\n" \
" -u Unlocks (re-enables) the specified user account"
" -d Delete the password for the specified user account\n" \
" -l Locks (disables) the specified user account\n" \
" -u Unlocks (re-enables) the specified user account"
#define patch_example_usage \
"$ patch -p1 < example.diff\n" \
"$ patch -p0 -i example.diff"
#define patch_example_usage \
"$ patch -p1 < example.diff\n" \
"$ patch -p0 -i example.diff"
#endif
#define pidof_trivial_usage \
"process-name [OPTION] [process-name ...]"
#define pidof_full_usage \
#endif
#define pidof_trivial_usage \
"process-name [OPTION] [process-name ...]"
#define pidof_full_usage \
" -c CNT Send only CNT pings\n" \
" -s SIZE Send SIZE data bytes in packets (default=56)\n" \
" -I IP Use IP as source address\n" \
" -c CNT Send only CNT pings\n" \
" -s SIZE Send SIZE data bytes in packets (default=56)\n" \
" -I IP Use IP as source address\n" \
" -c CNT Send only CNT pings\n" \
" -s SIZE Send SIZE data bytes in packets (default=56)\n" \
" -q Quiet mode, only displays output at start\n" \
" -c CNT Send only CNT pings\n" \
" -s SIZE Send SIZE data bytes in packets (default=56)\n" \
" -q Quiet mode, only displays output at start\n" \
#define poweroff_trivial_usage \
"[-d<delay>] [-n<nosync>] [-f<force>]"
#define poweroff_full_usage \
#define poweroff_trivial_usage \
"[-d<delay>] [-n<nosync>] [-f<force>]"
#define poweroff_full_usage \
- "Halt and shut off power.\n" \
- "Options:\n" \
- " -d delay interval for halting\n" \
- " -n no call to sync()\n" \
- " -f force power off (don't go through init)"
+ "Halt and shut off power" \
+ "\n\nOptions:\n" \
+ " -d Delay interval for halting\n" \
+ " -n No call to sync()\n" \
+ " -f Force power off (don't go through init)"
"If no environment VARIABLE specified, print them all."
#define printf_trivial_usage \
"FORMAT [ARGUMENT...]"
#define printf_full_usage \
"If no environment VARIABLE specified, print them all."
#define printf_trivial_usage \
"FORMAT [ARGUMENT...]"
#define printf_full_usage \
"\n -o col1,col2=header Select columns for display" \
#else /* !ENABLE_DESKTOP */
#if !defined CONFIG_SELINUX && !ENABLE_FEATURE_PS_WIDE
"\n -o col1,col2=header Select columns for display" \
#else /* !ENABLE_DESKTOP */
#if !defined CONFIG_SELINUX && !ENABLE_FEATURE_PS_WIDE
#define raidautorun_example_usage \
"$ raidautorun /dev/md0"
#define rdate_trivial_usage \
"[-sp] HOST"
#define rdate_full_usage \
#define raidautorun_example_usage \
"$ raidautorun /dev/md0"
#define rdate_trivial_usage \
"[-sp] HOST"
#define rdate_full_usage \
" -s Set the system date and time (default)\n" \
" -p Print the date and time"
#define readahead_trivial_usage \
"[FILE]..."
#define readahead_full_usage \
" -s Set the system date and time (default)\n" \
" -p Print the date and time"
#define readahead_trivial_usage \
"[FILE]..."
#define readahead_full_usage \
#define readlink_trivial_usage \
USE_FEATURE_READLINK_FOLLOW("[-f] ") "FILE"
#define readlink_full_usage \
#define readlink_trivial_usage \
USE_FEATURE_READLINK_FOLLOW("[-f] ") "FILE"
#define readlink_full_usage \
- " -m <mapfile> (default: /boot/System.map)\n" \
- " -p <profile> (default: /proc/profile)\n" \
- " -M <mult> set the profiling multiplier to <mult>\n" \
- " -i print only info about the sampling step\n" \
- " -v print verbose data\n" \
- " -a print all symbols, even if count is 0\n" \
- " -b print individual histogram-bin counts\n" \
- " -s print individual counters within functions\n" \
- " -r reset all the counters (root only)\n" \
- " -n disable byte order auto-detection"
+ " -m <mapfile> (Default: /boot/System.map)\n" \
+ " -p <profile> (Default: /proc/profile)\n" \
+ " -M <mult> Set the profiling multiplier to <mult>\n" \
+ " -i Print only info about the sampling step\n" \
+ " -v Print verbose data\n" \
+ " -a Print all symbols, even if count is 0\n" \
+ " -b Print individual histogram-bin counts\n" \
+ " -s Print individual counters within functions\n" \
+ " -r Reset all the counters (root only)\n" \
+ " -n Disable byte order auto-detection"
#define reboot_trivial_usage \
"[-d<delay>] [-n<nosync>] [-f<force>]"
#define reboot_full_usage \
#define reboot_trivial_usage \
"[-d<delay>] [-n<nosync>] [-f<force>]"
#define reboot_full_usage \
- "Reboot the system.\n" \
- "Options:\n" \
- " -d delay interval for rebooting\n" \
- " -n no call to sync()\n" \
- " -f force reboot (don't go through init)"
+ "Reboot the system" \
+ "\n\nOptions:\n" \
+ " -d Delay interval for rebooting\n" \
+ " -n No call to sync()\n" \
+ " -f Force reboot (don't go through init)"
#define renice_trivial_usage \
"{{-n INCREMENT} | PRIORITY} [[ -p | -g | -u ] ID ...]"
#define renice_full_usage \
#define renice_trivial_usage \
"{{-n INCREMENT} | PRIORITY} [[ -p | -g | -u ] ID ...]"
#define renice_full_usage \
- "Changes priority of running processes.\n\n" \
- "Options:\n" \
- " -n adjusts current nice value (smaller is faster)\n" \
- " -p process id(s) (default)\n" \
- " -g process group id(s)\n" \
- " -u process user name(s) and/or id(s)"
+ "Change priority of running processes" \
+ "\n\nOptions:\n" \
+ " -n Adjusts current nice value (smaller is faster)\n" \
+ " -p Process id(s) (default)\n" \
+ " -g Process group id(s)\n" \
+ " -u Process user name(s) and/or id(s)"
- "indicate that all following arguments are non-options.\n\n" \
- "Options:\n" \
- " -i always prompt before removing each destination\n" \
- " -f remove existing destinations, never prompt\n" \
- " -r,-R remove the contents of directories recursively"
+ "indicate that all following arguments are non-options." \
+ "\n\nOptions:\n" \
+ " -i Always prompt before removing each destination\n" \
+ " -f Remove existing destinations, never prompt\n" \
+ " -r,-R Remove the contents of directories recursively"
#define rm_example_usage \
"$ rm -rf /tmp/foo\n"
#define rmdir_trivial_usage \
"[OPTION]... DIRECTORY..."
#define rmdir_full_usage \
#define rm_example_usage \
"$ rm -rf /tmp/foo\n"
#define rmdir_trivial_usage \
"[OPTION]... DIRECTORY..."
#define rmdir_full_usage \
#define rmdir_example_usage \
"# rmdir /tmp/foo\n"
#define rmmod_trivial_usage \
"[OPTION]... [MODULE]..."
#define rmmod_full_usage \
#define rmdir_example_usage \
"# rmdir /tmp/foo\n"
#define rmmod_trivial_usage \
"[OPTION]... [MODULE]..."
#define rmmod_full_usage \
" -n Dont resolve names\n" \
" -e Display other/more information\n" \
" -A inet" USE_FEATURE_IPV6("{6}") " Select address family"
" -n Dont resolve names\n" \
" -e Display other/more information\n" \
" -A inet" USE_FEATURE_IPV6("{6}") " Select address family"
- "\n -i Install package" \
- "\n -q Query package" \
- "\n -p Query uninstalled package" \
- "\n -i Show information" \
- "\n -l List contents" \
- "\n -d List documents" \
- "\n -c List config files"
+ "\n -i Install package" \
+ "\n -q Query package" \
+ "\n -p Query uninstalled package" \
+ "\n -i Show information" \
+ "\n -l List contents" \
+ "\n -d List documents" \
+ "\n -c List config files"
#define run_parts_trivial_usage \
"[-t] [-a ARG] [-u MASK] DIRECTORY"
#define run_parts_full_usage \
#define run_parts_trivial_usage \
"[-t] [-a ARG] [-u MASK] DIRECTORY"
#define run_parts_full_usage \
" -t Prints what would be run, but does not actually run anything\n" \
" -a ARG Pass ARG as an argument for every program invoked\n" \
" -u MASK Set the umask to MASK before executing every program"
" -t Prints what would be run, but does not actually run anything\n" \
" -a ARG Pass ARG as an argument for every program invoked\n" \
" -u MASK Set the umask to MASK before executing every program"
#define runlevel_full_usage \
"Find the current and previous system runlevel.\n\n" \
"If no utmp file exists or if no runlevel record can be found,\n" \
#define runlevel_full_usage \
"Find the current and previous system runlevel.\n\n" \
"If no utmp file exists or if no runlevel record can be found,\n" \
- " -i edit files in-place\n" \
- " -n suppress automatic printing of pattern space\n" \
- " -r use extended regular expression syntax\n" \
+ " -i Edit files in-place\n" \
+ " -n Suppress automatic printing of pattern space\n" \
+ " -r Use extended regular expression syntax\n" \
#define sha1sum_trivial_usage \
"[OPTION] [FILEs...]" \
USE_FEATURE_MD5_SHA1_SUM_CHECK("\n or: sha1sum [OPTION] -c [FILE]")
#define sha1sum_full_usage \
#define sha1sum_trivial_usage \
"[OPTION] [FILEs...]" \
USE_FEATURE_MD5_SHA1_SUM_CHECK("\n or: sha1sum [OPTION] -c [FILE]")
#define sha1sum_full_usage \
#define sleep_trivial_usage \
USE_FEATURE_FANCY_SLEEP("[") "N" USE_FEATURE_FANCY_SLEEP("]...")
#define sleep_full_usage \
#define sleep_trivial_usage \
USE_FEATURE_FANCY_SLEEP("[") "N" USE_FEATURE_FANCY_SLEEP("]...")
#define sleep_full_usage \
- " -b ignore leading blanks\n" \
- " -c check whether input is sorted\n" \
- " -d dictionary order (blank or alphanumeric only)\n" \
- " -f ignore case\n" \
- " -g general numerical sort\n" \
- " -i ignore unprintable characters\n" \
- " -k specify sort key\n" \
- " -M sort month\n") \
- " -n sort numbers\n" \
+ " -b Ignore leading blanks\n" \
+ " -c Check whether input is sorted\n" \
+ " -d Dictionary order (blank or alphanumeric only)\n" \
+ " -f Ignore case\n" \
+ " -g General numerical sort\n" \
+ " -i Ignore unprintable characters\n" \
+ " -k Specify sort key\n" \
+ " -M Sort month\n") \
+ " -n Sort numbers\n" \
- " -o output to file\n" \
- " -k sort by key\n" \
- " -t use key separator other than whitespace\n") \
- " -r reverse sort order\n" \
+ " -o Output to file\n" \
+ " -k Sort by key\n" \
+ " -t Use key separator other than whitespace\n") \
+ " -r Reverse sort order\n" \
#define start_stop_daemon_trivial_usage \
"[OPTIONS] [--start|--stop] ... [-- arguments...]"
#define start_stop_daemon_full_usage \
#define start_stop_daemon_trivial_usage \
"[OPTIONS] [--start|--stop] ... [-- arguments...]"
#define start_stop_daemon_full_usage \
- "\n -S|--start start" \
- "\n -K|--stop stop" \
- "\n -a|--startas <pathname> starts process specified by pathname" \
- "\n -b|--background force process into background" \
- "\n -u|--user <username>|<uid> stop this user's processes" \
- "\n -x|--exec <executable> program to either start or check" \
- "\n -m|--make-pidfile create the -p file and enter pid in it" \
- "\n -n|--name <process-name> stop processes with this name" \
- "\n -p|--pidfile <pid-file> save or load pid using a pid-file" \
- "\n -q|--quiet be quiet" \
+ "\n -S|--start Start" \
+ "\n -K|--stop Stop" \
+ "\n -a|--startas <pathname> Starts process specified by pathname" \
+ "\n -b|--background Force process into background" \
+ "\n -u|--user <username>|<uid> Stop this user's processes" \
+ "\n -x|--exec <executable> Program to either start or check" \
+ "\n -m|--make-pidfile Create the -p file and enter pid in it" \
+ "\n -n|--name <process-name> Stop processes with this name" \
+ "\n -p|--pidfile <pid-file> Save or load pid using a pid-file" \
+ "\n -q|--quiet Be quiet" \
- "\n -o|--oknodo exit status 0 if nothing done" \
- "\n -v|--verbose be verbose" \
- "\n -N|--nicelevel <N> add N to process's nice level" \
+ "\n -o|--oknodo Exit status 0 if nothing done" \
+ "\n -v|--verbose Be verbose" \
+ "\n -N|--nicelevel <N> Add N to process's nice level" \
- " -c fmt use the specified format\n") \
- " -f display filesystem status\n" \
- " -L,-l dereference links\n" \
- " -t display info in terse form" \
+ " -c fmt Use the specified format\n") \
+ " -f Display filesystem status\n" \
+ " -L,-l Dereference links\n" \
+ " -t Display info in terse form" \
USE_FEATURE_STAT_FORMAT( \
"\n\nValid format sequences for files:\n" \
" %a Access rights in octal\n" \
USE_FEATURE_STAT_FORMAT( \
"\n\nValid format sequences for files:\n" \
" %a Access rights in octal\n" \
#define strings_trivial_usage \
"[-afo] [-n length] [file ... ]"
#define strings_full_usage \
#define strings_trivial_usage \
"[-afo] [-n length] [file ... ]"
#define strings_full_usage \
"\n -n N Specifies that at least N characters forms a sequence (default 4)" \
"\n -o Each string is preceded by its decimal offset in the file"
#define stty_trivial_usage \
"[-a|g] [-F DEVICE] [SETTING]..."
#define stty_full_usage \
"\n -n N Specifies that at least N characters forms a sequence (default 4)" \
"\n -o Each string is preceded by its decimal offset in the file"
#define stty_trivial_usage \
"[-a|g] [-F DEVICE] [SETTING]..."
#define stty_full_usage \
- "Without arguments, prints baud rate, line discipline," \
- "\nand deviations from stty sane." \
+ "Without arguments, prints baud rate, line discipline,\n" \
+ "and deviations from stty sane" \
- "\n -F DEVICE open device instead of stdin" \
- "\n -a print all current settings in human-readable form" \
- "\n -g print in stty-readable form" \
- "\n [SETTING] see manpage"
+ "\n -F DEVICE Open device instead of stdin" \
+ "\n -a Print all current settings in human-readable form" \
+ "\n -g Print in stty-readable form" \
+ "\n [SETTING] See manpage"
"\n -c Command to pass to 'sh -c'" \
"\n -s Shell to use instead of default shell"
#define sulogin_trivial_usage \
"[OPTION]... [tty-device]"
#define sulogin_full_usage \
"\n -c Command to pass to 'sh -c'" \
"\n -s Shell to use instead of default shell"
#define sulogin_trivial_usage \
"[OPTION]... [tty-device]"
#define sulogin_full_usage \
- "checksum and count the blocks in a file\n\n" \
- "Options:\n" \
- " -r use BSD sum algorithm (1K blocks)\n" \
- " -s use System V sum algorithm (512byte blocks)"
+ "Checksum and count the blocks in a file" \
+ "\n\nOptions:\n" \
+ " -r Use BSD sum algorithm (1K blocks)\n" \
+ " -s Use System V sum algorithm (512byte blocks)"
#define sv_trivial_usage \
"[-v] [-w sec] command service..."
#define sv_full_usage \
"Report the current status and control the state of services " \
#define sv_trivial_usage \
"[-v] [-w sec] command service..."
#define sv_full_usage \
"Report the current status and control the state of services " \
#define svlogd_trivial_usage \
"[-ttv] [-r c] [-R abc] [-l len] [-b buflen] dir..."
#define svlogd_full_usage \
"Continuously read log data from standard input, optionally " \
"filter log messages, and write the data to one or more automatically " \
#define svlogd_trivial_usage \
"[-ttv] [-r c] [-R abc] [-l len] [-b buflen] dir..."
#define svlogd_full_usage \
"Continuously read log data from standard input, optionally " \
"filter log messages, and write the data to one or more automatically " \
" -a Stop swapping on all swap devices"
#define swapon_trivial_usage \
"[-a] [DEVICE]"
#define swapon_full_usage \
" -a Stop swapping on all swap devices"
#define swapon_trivial_usage \
"[-a] [DEVICE]"
#define swapon_full_usage \
" -a Start swapping on all swap devices"
#define switch_root_trivial_usage \
"[-c /dev/console] NEW_ROOT NEW_INIT [ARGUMENTS_TO_INIT]"
#define switch_root_full_usage \
"Use from PID 1 under initramfs to free initramfs, chroot to NEW_ROOT,\n" \
" -a Start swapping on all swap devices"
#define switch_root_trivial_usage \
"[-c /dev/console] NEW_ROOT NEW_INIT [ARGUMENTS_TO_INIT]"
#define switch_root_full_usage \
"Use from PID 1 under initramfs to free initramfs, chroot to NEW_ROOT,\n" \
" -c Redirect console to device on new root"
#define sync_trivial_usage \
""
#define sync_full_usage \
" -c Redirect console to device on new root"
#define sync_trivial_usage \
""
#define sync_full_usage \
#define sysctl_trivial_usage \
"[OPTIONS]... [VALUE]..."
#define sysctl_full_usage \
#define sysctl_trivial_usage \
"[OPTIONS]... [VALUE]..."
#define sysctl_full_usage \
" -n Use this option to disable printing of the key name when printing values\n" \
" -w Use this option when you want to change a sysctl setting\n" \
" -p Load in sysctl settings from the file specified or /etc/sysctl.conf if none given\n" \
" -n Use this option to disable printing of the key name when printing values\n" \
" -w Use this option when you want to change a sysctl setting\n" \
" -p Load in sysctl settings from the file specified or /etc/sysctl.conf if none given\n" \
- "Linux system and kernel logging utility.\n" \
- "Note that this version of syslogd ignores /etc/syslog.conf.\n\n" \
- "Options:\n" \
- " -m MIN Minutes between MARK lines (default=20, 0=off)\n" \
- " -n Run as a foreground process\n" \
- " -O FILE Use an alternate log file (default=/var/log/messages)\n" \
- " -l n Sets the local log level of messages to n\n" \
- " -S Make logging output smaller" \
+ "System logging utility.\n" \
+ "Note that this version of syslogd ignores /etc/syslog.conf." \
+ "\n\nOptions:" \
+ "\n -m MIN Minutes between MARK lines (default=20, 0=off)" \
+ "\n -n Run as foreground process" \
+ "\n -O FILE Use an alternate log file (default=/var/log/messages)" \
+ "\n -l n Sets the local log level of messages to n" \
+ "\n -S Make logging output smaller" \
- "\n -s SIZE Max size (KB) before rotate (default=200KB, 0=off)" \
- "\n -b NUM Number of rotated logs to keep (default=1, max=99, 0=purge)") \
+ "\n -s SIZE Max size (KB) before rotate (default=200KB, 0=off)" \
+ "\n -b NUM Number of rotated logs to keep (default=1, max=99, 0=purge)") \
#define syslogd_example_usage \
"$ syslogd -R masterlog:514\n" \
"$ syslogd -R 192.168.1.1:601\n"
#define syslogd_example_usage \
"$ syslogd -R masterlog:514\n" \
"$ syslogd -R 192.168.1.1:601\n"
#define tail_full_usage \
"Print last 10 lines of each FILE to standard output.\n" \
"With more than one FILE, precede each with a header giving the\n" \
#define tail_full_usage \
"Print last 10 lines of each FILE to standard output.\n" \
"With more than one FILE, precede each with a header giving the\n" \
- " -c N[kbm] output the last N bytes\n") \
- " -n N[kbm] print last N lines instead of last 10\n" \
- " -f output data as the file grows" \
+ "\n -c N[kbm] Output the last N bytes") \
+ "\n -n N[kbm] Print last N lines instead of last 10" \
+ "\n -f Output data as the file grows" \
- "\n -q never output headers giving file names\n" \
- " -s SEC wait SEC seconds between reads with -f\n" \
- " -v always output headers giving file names\n\n" \
+ "\n -q Never output headers giving file names" \
+ "\n -s SEC Wait SEC seconds between reads with -f" \
+ "\n -v Always output headers giving file names" \
+ "\n\n" \
"If the first character of N (bytes or lines) is a '+', output begins with\n" \
"the Nth item from the start of each file, otherwise, print the last N items\n" \
"in the file. N bytes may be suffixed by k (x1024), b (x512), or m (1024^2)." )
"If the first character of N (bytes or lines) is a '+', output begins with\n" \
"the Nth item from the start of each file, otherwise, print the last N items\n" \
"in the file. N bytes may be suffixed by k (x1024), b (x512), or m (1024^2)." )
- " exclude file to exclude\n" \
- " X file with names to exclude\n") \
- " C change to directory DIR before operation\n" \
- " v verbosely list files processed"
+ " exclude File to exclude\n" \
+ " X File with names to exclude\n") \
+ " C Change to directory DIR before operation\n" \
+ " v Verbosely list files processed"
#define tar_example_usage \
"$ zcat /tmp/tarball.tar.gz | tar -xf -\n" \
"$ tar -cf /tmp/tarball.tar /usr/local\n"
#define taskset_trivial_usage \
#define tar_example_usage \
"$ zcat /tmp/tarball.tar.gz | tar -xf -\n" \
"$ tar -cf /tmp/tarball.tar /usr/local\n"
#define taskset_trivial_usage \
- "$ taskset 0x7 ./dgemm_test&\n" \
- "$ taskset -p 0x1 $!\n" \
- "pid 4790's current affinity mask: 7\n" \
- "pid 4790's new affinity mask: 1\n" \
- "$ taskset 0x7 /bin/sh -c './taskset -p 0x1 $$'\n" \
- "pid 6671's current affinity mask: 1\n" \
- "pid 6671's new affinity mask: 1\n" \
- "$ taskset -p 1\n"
- "pid 1's current affinity mask: 3\n"
+ "$ taskset 0x7 ./dgemm_test&\n" \
+ "$ taskset -p 0x1 $!\n" \
+ "pid 4790's current affinity mask: 7\n" \
+ "pid 4790's new affinity mask: 1\n" \
+ "$ taskset 0x7 /bin/sh -c './taskset -p 0x1 $$'\n" \
+ "pid 6671's current affinity mask: 1\n" \
+ "pid 6671's new affinity mask: 1\n" \
+ "$ taskset -p 1\n" \
+ "pid 1's current affinity mask: 3\n"
- "Copy standard input to each FILE, and also to standard output.\n\n" \
- "Options:\n" \
- " -a append to the given FILEs, do not overwrite\n" \
- " -i ignore interrupt signals (SIGINT)"
+ "Copy standard input to each FILE, and also to standard output" \
+ "\n\nOptions:\n" \
+ " -a Append to the given FILEs, do not overwrite\n" \
+ " -i Ignore interrupt signals (SIGINT)"
#define telnet_trivial_usage \
"[-a] [-l USER] HOST [PORT]"
#define telnet_full_usage \
#define telnet_trivial_usage \
"[-a] [-l USER] HOST [PORT]"
#define telnet_full_usage \
" -a Attempt an automatic login with the USER variable\n" \
" -l USER Attempt an automatic login with the USER argument\n" \
" HOST The official name, alias or the IP address of the\n" \
" -a Attempt an automatic login with the USER variable\n" \
" -l USER Attempt an automatic login with the USER argument\n" \
" HOST The official name, alias or the IP address of the\n" \
" PORT The remote port number to connect to. If it is not\n" \
" specified, the default telnet (23) port is used."
#else
#define telnet_trivial_usage \
"HOST [PORT]"
#define telnet_full_usage \
" PORT The remote port number to connect to. If it is not\n" \
" specified, the default telnet (23) port is used."
#else
#define telnet_trivial_usage \
"HOST [PORT]"
#define telnet_full_usage \
-#ifdef CONFIG_FEATURE_TELNETD_STANDALONE
-#define telnetd_trivial_usage \
- "[OPTION]"
-#define telnetd_full_usage \
- "Telnetd listens for incoming TELNET connections on PORT.\n" \
- "Options:\n" \
- " -p PORT listen for connections on PORT (default 23)\n" \
- " -l LOGIN exec LOGIN on connect\n" \
- " -f issue_file Display issue_file instead of /etc/issue\n" \
- " -F Foreground mode\n" \
- " -i Inetd mode"
-#else
- "Telnetd uses incoming TELNET connections via inetd.\n" \
- "Options:\n" \
- " -l LOGIN exec LOGIN on connect\n" \
- " -f issue_file Display issue_file instead of /etc/issue"
-#endif
+ "Handle incoming telnet connections" \
+ SKIP_FEATURE_TELNETD_STANDALONE(" via inetd") \
+ "\n\nOptions:" \
+ "\n -l LOGIN Exec LOGIN on connect" \
+ "\n -f issue_file Display issue_file instead of /etc/issue" \
+ USE_FEATURE_TELNETD_STANDALONE( \
+ "\n -p PORT Port to listen to" \
+ "\n -b ADDR Address to bind to" \
+ "\n -F Stay in foreground" \
+ "\n -i Run as inetd subservice" \
+ )
#define test_trivial_usage \
"EXPRESSION\n or [ EXPRESSION ]"
#define test_full_usage \
#define test_trivial_usage \
"EXPRESSION\n or [ EXPRESSION ]"
#define test_full_usage \
#define tftp_trivial_usage \
"[OPTION]... HOST [PORT]"
#define tftp_full_usage \
#define tftp_trivial_usage \
"[OPTION]... HOST [PORT]"
#define tftp_full_usage \
- "Transfers a file from/to a tftp server using \"octet\" mode.\n\n" \
- "Options:\n" \
- " -l FILE Local FILE\n" \
- " -r FILE Remote FILE" \
+ "Transfer a file from/to tftp server using \"octet\" mode" \
+ "\n\nOptions:" \
+ "\n -l FILE Local FILE" \
+ "\n -r FILE Remote FILE" \
#define time_trivial_usage \
"[OPTION]... COMMAND [ARGS...]"
#define time_full_usage \
#define time_trivial_usage \
"[OPTION]... COMMAND [ARGS...]"
#define time_full_usage \
- "Runs the program COMMAND with arguments ARGS. When COMMAND finishes,\n" \
- "COMMAND's resource usage information is displayed\n\n" \
- "Options:\n" \
- " -v Displays verbose resource usage information"
+ "Run the program COMMAND with arguments ARGS. When COMMAND finishes,\n" \
+ "COMMAND's resource usage information is displayed." \
+ "\n\nOptions:\n" \
+ " -v Display verbose resource usage information"
- "top provides a view of process activity in real time.\n" \
- "It reads the status of all processes from /proc each <seconds>\n" \
- "and shows the status for however many processes will fit on the screen."
+ "Provide a view of process activity in real time.\n" \
+ "Read the status of all processes from /proc each <seconds>\n" \
+ "and show the status for however many processes will fit on the screen."
"[-cds] STRING1 [STRING2]"
#define tr_full_usage \
"Translate, squeeze, and/or delete characters from\n" \
"[-cds] STRING1 [STRING2]"
#define tr_full_usage \
"Translate, squeeze, and/or delete characters from\n" \
- "standard input, writing to standard output.\n\n" \
- "Options:\n" \
- " -c take complement of STRING1\n" \
- " -d delete input characters coded STRING1\n" \
- " -s squeeze multiple output characters of STRING2 into one character"
+ "standard input, writing to standard output" \
+ "\n\nOptions:\n" \
+ " -c Take complement of STRING1\n" \
+ " -d Delete input characters coded STRING1\n" \
+ " -s Squeeze multiple output characters of STRING2 into one character"
" [-s src_addr] [-t tos] [-w wait] [-g gateway] [-i iface]\n" \
" [-z pausemsecs] host [data size]"
#define traceroute_full_usage \
" [-s src_addr] [-t tos] [-w wait] [-g gateway] [-i iface]\n" \
" [-z pausemsecs] host [data size]"
#define traceroute_full_usage \
" -F Set the don't fragment bit\n" \
" -I Use ICMP ECHO instead of UDP datagrams\n" \
" -l Display the ttl value of the returned packet\n" \
" -F Set the don't fragment bit\n" \
" -I Use ICMP ECHO instead of UDP datagrams\n" \
" -l Display the ttl value of the returned packet\n" \
"[-L volume-label] [-M last-mounted-dir] [-O [^]feature[,...]] " \
"[-T last-check-time] [-U UUID] device"
#define tune2fs_full_usage \
"[-L volume-label] [-M last-mounted-dir] [-O [^]feature[,...]] " \
"[-T last-check-time] [-U UUID] device"
#define tune2fs_full_usage \
#define umount_trivial_usage \
"[flags] FILESYSTEM|DIRECTORY"
#define umount_full_usage \
#define umount_trivial_usage \
"[flags] FILESYSTEM|DIRECTORY"
#define umount_full_usage \
"\n -a Unmount all file systems" USE_FEATURE_MTAB_SUPPORT(" in /etc/mtab") \
USE_FEATURE_MTAB_SUPPORT( \
"\n -n Don't erase /etc/mtab entries") \
"\n -a Unmount all file systems" USE_FEATURE_MTAB_SUPPORT(" in /etc/mtab") \
USE_FEATURE_MTAB_SUPPORT( \
"\n -n Don't erase /etc/mtab entries") \
- "Print certain system information. With no OPTION, same as -s.\n\n" \
- "Options:\n" \
- " -a print all information\n" \
- " -m the machine (hardware) type\n" \
- " -n print the machine's network node hostname\n" \
- " -r print the operating system release\n" \
- " -s print the operating system name\n" \
- " -p print the host processor type\n" \
- " -v print the operating system version"
+ "Print certain system information. With no OPTION, same as -s." \
+ "\n\nOptions:\n" \
+ " -a Print all information\n" \
+ " -m The machine (hardware) type\n" \
+ " -n Print the machine's network node hostname\n" \
+ " -r Print the operating system release\n" \
+ " -s Print the operating system name\n" \
+ " -p Print the host processor type\n" \
+ " -v Print the operating system version"
- "Uncompress .Z file[s]\n" \
- "Options:\n" \
- " -c extract to stdout\n" \
- " -f force overwrite an existing file"
+ "Uncompress .Z file[s]" \
+ "\n\nOptions:\n" \
+ " -c Extract to stdout\n" \
+ " -f Force overwrite an existing file"
#define uniq_trivial_usage \
"[-fscdu]... [INPUT [OUTPUT]]"
#define uniq_full_usage \
"Discard all but one of successive identical lines from INPUT\n" \
#define uniq_trivial_usage \
"[-fscdu]... [INPUT [OUTPUT]]"
#define uniq_full_usage \
"Discard all but one of successive identical lines from INPUT\n" \
- "(or standard input), writing to OUTPUT (or standard output).\n\n" \
- "Options:\n" \
- " -c prefix lines by the number of occurrences\n" \
- " -d only print duplicate lines\n" \
- " -u only print unique lines\n" \
- " -f N skip the first N fields\n" \
- " -s N skip the first N chars (after any skipped fields)"
+ "(or standard input), writing to OUTPUT (or standard output)" \
+ "\n\nOptions:\n" \
+ " -c Prefix lines by the number of occurrences\n" \
+ " -d Only print duplicate lines\n" \
+ " -u Only print unique lines\n" \
+ " -f N Skip the first N fields\n" \
+ " -s N Skip the first N chars (after any skipped fields)"
- "When no file is given, uses stdin for input and stdout for output.\n" \
- "Options:\n" \
- " -u output will be in UNIX format\n" \
- " -d output will be in DOS format"
+ "When no file is given, use stdin for input and stdout for output." \
+ "\n\nOptions:\n" \
+ " -u Output will be in UNIX format\n" \
+ " -d Output will be in DOS format"
#define unzip_trivial_usage \
"[-opts[modifiers]] file[.zip] [list] [-x xlist] [-d exdir]"
#define unzip_full_usage \
#define unzip_trivial_usage \
"[-opts[modifiers]] file[.zip] [list] [-x xlist] [-d exdir]"
#define unzip_full_usage \
- "Extracts files from ZIP archives.\n\n" \
- "Options:\n" \
- " -l list archive contents (short form)\n" \
- " -n never overwrite existing files (default)\n" \
- " -o overwrite files without prompting\n" \
- " -p send output to stdout\n" \
- " -q be quiet\n" \
- " -x exclude these files\n" \
- " -d extract files into this directory"
+ "Extract files from ZIP archives" \
+ "\n\nOptions:\n" \
+ " -l List archive contents (short form)\n" \
+ " -n Never overwrite existing files (default)\n" \
+ " -o Overwrite files without prompting\n" \
+ " -p Send output to stdout\n" \
+ " -q Be quiet\n" \
+ " -x Exclude these files\n" \
+ " -d Extract files into this directory"
#define uptime_example_usage \
"$ uptime\n" \
" 1:55pm up 2:30, load average: 0.09, 0.04, 0.00\n"
#define uptime_example_usage \
"$ uptime\n" \
" 1:55pm up 2:30, load average: 0.09, 0.04, 0.00\n"
#define uuencode_trivial_usage \
"[OPTION] [INFILE] REMOTEFILE"
#define uuencode_full_usage \
#define uuencode_trivial_usage \
"[OPTION] [INFILE] REMOTEFILE"
#define uuencode_full_usage \
" -a Lock all VTs"
#define watch_trivial_usage \
"[-n <seconds>] [-t] COMMAND..."
#define watch_full_usage \
" -a Lock all VTs"
#define watch_trivial_usage \
"[-n <seconds>] [-t] COMMAND..."
#define watch_full_usage \
#define watchdog_trivial_usage \
"[-t <seconds>] [-F] DEV"
#define watchdog_full_usage \
#define watchdog_trivial_usage \
"[-t <seconds>] [-F] DEV"
#define watchdog_full_usage \
- "more than one FILE is specified. With no FILE, read standard input.\n\n" \
- "Options:\n" \
- " -c print the byte counts\n" \
- " -l print the newline counts\n" \
- " -L print the length of the longest line\n" \
- " -w print the word counts"
+ "more than one FILE is specified. With no FILE, read standard input." \
+ "\n\nOptions:\n" \
+ " -c Print the byte counts\n" \
+ " -l Print the newline counts\n" \
+ " -L Print the length of the longest line\n" \
+ " -w Print the word counts"
" [--header 'header: value'] [-Y|--proxy on/off] [-P DIR]\n" \
" [-U|--user-agent agent] url"
#define wget_full_usage \
" [--header 'header: value'] [-Y|--proxy on/off] [-P DIR]\n" \
" [-U|--user-agent agent] url"
#define wget_full_usage \
- "wget retrieves files via HTTP or FTP\n\n" \
- "Options:\n" \
- " -c continue retrieval of aborted transfers\n" \
- " -q quiet mode - do not print\n" \
+ "Retrieve files via HTTP or FTP" \
+ "\n\nOptions:\n" \
+ " -c Continue retrieval of aborted transfers\n" \
+ " -q Quiet mode - do not print\n" \
- " -O save to filename ('-' for stdout)\n" \
- " -U adjust 'User-Agent' field\n" \
- " -Y use proxy ('on' or 'off')"
+ " -O Save to filename ('-' for stdout)\n" \
+ " -U Adjust 'User-Agent' field\n" \
+ " -Y Use proxy ('on' or 'off')"
#define xargs_trivial_usage \
"[OPTIONS] [COMMAND] [ARGS...]"
#define xargs_full_usage \
#define xargs_trivial_usage \
"[OPTIONS] [COMMAND] [ARGS...]"
#define xargs_full_usage \
USE_FEATURE_XARGS_SUPPORT_CONFIRMATION( \
" -p Prompt the user about whether to run each command\n") \
" -r Do not run command for empty read lines\n" \
USE_FEATURE_XARGS_SUPPORT_CONFIRMATION( \
" -p Prompt the user about whether to run each command\n") \
" -r Do not run command for empty read lines\n" \
#define zcip_trivial_usage \
"[OPTIONS] ifname script"
#define zcip_full_usage \
#define zcip_trivial_usage \
"[OPTIONS] ifname script"
#define zcip_full_usage \
" -f foreground mode\n" \
" -q quit after address (no daemon)\n" \
" -r 169.254.x.x request this address first\n" \
" -f foreground mode\n" \
" -q quit after address (no daemon)\n" \
" -r 169.254.x.x request this address first\n" \