+extern char lcd_is_enabled;
+
+extern int lcd_line_length;
+extern int lcd_color_fg;
+extern int lcd_color_bg;
+
+/*
+ * Frame buffer memory information
+ */
+extern void *lcd_base; /* Start of framebuffer memory */
+extern void *lcd_console_address; /* Start of console buffer */
+
+extern short console_col;
+extern short console_row;
+extern struct vidinfo panel_info;
+
+extern void lcd_ctrl_init (void *lcdbase);
+extern void lcd_enable (void);
+
+/* setcolreg used in 8bpp/16bpp; initcolregs used in monochrome */
+extern void lcd_setcolreg (ushort regno,
+ ushort red, ushort green, ushort blue);
+extern void lcd_initcolregs (void);
+
+/* gunzip_bmp used if CONFIG_VIDEO_BMP_GZIP */
+extern struct bmp_image *gunzip_bmp(unsigned long addr, unsigned long *lenp);
+
+#if defined CONFIG_MPC823
+/*
+ * LCD controller stucture for MPC823 CPU
+ */
+typedef struct vidinfo {
+ ushort vl_col; /* Number of columns (i.e. 640) */
+ ushort vl_row; /* Number of rows (i.e. 480) */
+ ushort vl_width; /* Width of display area in millimeters */
+ ushort vl_height; /* Height of display area in millimeters */
+
+ /* LCD configuration register */
+ u_char vl_clkp; /* Clock polarity */
+ u_char vl_oep; /* Output Enable polarity */
+ u_char vl_hsp; /* Horizontal Sync polarity */
+ u_char vl_vsp; /* Vertical Sync polarity */
+ u_char vl_dp; /* Data polarity */
+ u_char vl_bpix; /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8 */
+ u_char vl_lbw; /* LCD Bus width, 0 = 4, 1 = 8 */
+ u_char vl_splt; /* Split display, 0 = single-scan, 1 = dual-scan */
+ u_char vl_clor; /* Color, 0 = mono, 1 = color */
+ u_char vl_tft; /* 0 = passive, 1 = TFT */
+
+ /* Horizontal control register. Timing from data sheet */
+ ushort vl_wbl; /* Wait between lines */
+
+ /* Vertical control register */
+ u_char vl_vpw; /* Vertical sync pulse width */
+ u_char vl_lcdac; /* LCD AC timing */
+ u_char vl_wbf; /* Wait between frames */
+} vidinfo_t;
+
+#elif defined CONFIG_PXA250
+/*
+ * PXA LCD DMA descriptor
+ */
+struct pxafb_dma_descriptor {
+ u_long fdadr; /* Frame descriptor address register */
+ u_long fsadr; /* Frame source address register */
+ u_long fidr; /* Frame ID register */
+ u_long ldcmd; /* Command register */
+};
+
+/*
+ * PXA LCD info
+ */
+struct pxafb_info {
+
+ /* Misc registers */
+ u_long reg_lccr3;
+ u_long reg_lccr2;
+ u_long reg_lccr1;
+ u_long reg_lccr0;
+ u_long fdadr0;
+ u_long fdadr1;
+
+ /* DMA descriptors */
+ struct pxafb_dma_descriptor * dmadesc_fblow;
+ struct pxafb_dma_descriptor * dmadesc_fbhigh;
+ struct pxafb_dma_descriptor * dmadesc_palette;
+
+ u_long screen; /* physical address of frame buffer */
+ u_long palette; /* physical address of palette memory */
+ u_int palette_size;
+};
+
+/*
+ * LCD controller stucture for PXA CPU
+ */
+typedef struct vidinfo {
+ ushort vl_col; /* Number of columns (i.e. 640) */
+ ushort vl_row; /* Number of rows (i.e. 480) */
+ ushort vl_width; /* Width of display area in millimeters */
+ ushort vl_height; /* Height of display area in millimeters */
+
+ /* LCD configuration register */
+ u_char vl_clkp; /* Clock polarity */
+ u_char vl_oep; /* Output Enable polarity */
+ u_char vl_hsp; /* Horizontal Sync polarity */
+ u_char vl_vsp; /* Vertical Sync polarity */
+ u_char vl_dp; /* Data polarity */
+ u_char vl_bpix; /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 = 16 */
+ u_char vl_lbw; /* LCD Bus width, 0 = 4, 1 = 8 */
+ u_char vl_splt; /* Split display, 0 = single-scan, 1 = dual-scan */
+ u_char vl_clor; /* Color, 0 = mono, 1 = color */
+ u_char vl_tft; /* 0 = passive, 1 = TFT */
+
+ /* Horizontal control register. Timing from data sheet */
+ ushort vl_hpw; /* Horz sync pulse width */
+ u_char vl_blw; /* Wait before of line */
+ u_char vl_elw; /* Wait end of line */
+
+ /* Vertical control register. */
+ u_char vl_vpw; /* Vertical sync pulse width */
+ u_char vl_bfw; /* Wait before of frame */
+ u_char vl_efw; /* Wait end of frame */
+
+ /* PXA LCD controller params */
+ struct pxafb_info pxa;
+} vidinfo_t;
+
+#elif defined(CONFIG_ATMEL_LCD)
+
+typedef struct vidinfo {
+ u_long vl_col; /* Number of columns (i.e. 640) */
+ u_long vl_row; /* Number of rows (i.e. 480) */
+ u_long vl_clk; /* pixel clock in ps */
+
+ /* LCD configuration register */
+ u_long vl_sync; /* Horizontal / vertical sync */
+ u_long vl_bpix; /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 = 16 */
+ u_long vl_tft; /* 0 = passive, 1 = TFT */
+
+ /* Horizontal control register. */
+ u_long vl_hsync_len; /* Length of horizontal sync */
+ u_long vl_left_margin; /* Time from sync to picture */
+ u_long vl_right_margin; /* Time from picture to sync */
+
+ /* Vertical control register. */
+ u_long vl_vsync_len; /* Length of vertical sync */
+ u_long vl_upper_margin; /* Time from sync to picture */
+ u_long vl_lower_margin; /* Time from picture to sync */
+
+ u_long mmio; /* Memory mapped registers */
+} vidinfo_t;
+
+#else
+
+typedef struct vidinfo {
+ ushort vl_col; /* Number of columns (i.e. 160) */
+ ushort vl_row; /* Number of rows (i.e. 100) */
+
+ u_char vl_bpix; /* Bits per pixel, 0 = 1 */
+
+ ushort *cmap; /* Pointer to the colormap */
+
+ void *priv; /* Pointer to driver-specific data */
+} vidinfo_t;
+
+#endif /* CONFIG_MPC823, CONFIG_PXA250 or CONFIG_MCC200 or CONFIG_ATMEL_LCD */
+
+extern vidinfo_t panel_info;
+