-#define CFG_FLASH0 0xFC000000
-#define CFG_FLASH1 0xF8000000
-#define CFG_FLASH_BANKS_LIST { CFG_FLASH1, CFG_FLASH0 }
-
-#define CFG_LBC_FLASH_BASE CFG_FLASH1 /* Localbus flash start */
-#define CFG_FLASH_BASE CFG_LBC_FLASH_BASE /* start of FLASH */
-
-#define CFG_BR0_PRELIM 0xfc001801 /* port size 32bit */
-#define CFG_OR0_PRELIM 0xfc000040 /* 64MB Flash */
-#define CFG_BR1_PRELIM 0xf8001801 /* port size 32bit */
-#define CFG_OR1_PRELIM 0xfc000040 /* 64MB Flash */
-
-#define CFG_FLASH_CFI /* flash is CFI compat. */
-#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */
-#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector */
-#define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash*/
-
-#define CFG_MAX_FLASH_BANKS 2 /* number of banks */
-#define CFG_MAX_FLASH_SECT 512 /* sectors per device */
-#undef CFG_FLASH_CHECKSUM
-#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
-#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-
-#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
+#ifdef CONFIG_TQM_BIGFLASH
+#define CONFIG_SYS_FLASH0 0xE0000000
+#define CONFIG_SYS_FLASH1 0xC0000000
+#else /* !CONFIG_TQM_BIGFLASH */
+#define CONFIG_SYS_FLASH0 0xFC000000
+#define CONFIG_SYS_FLASH1 0xF8000000
+#endif /* CONFIG_TQM_BIGFLASH */
+#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH1, CONFIG_SYS_FLASH0 }
+
+#define CONFIG_SYS_LBC_FLASH_BASE CONFIG_SYS_FLASH1 /* Localbus flash start */
+#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_LBC_FLASH_BASE /* start of FLASH */
+
+/* Default ORx timings are for <= 41.7 MHz Local Bus Clock.
+ *
+ * Note: According to timing specifications external addr latch delay
+ * (EAD, bit #0) must be set if Local Bus Clock is > 83 MHz.
+ *
+ * For other Local Bus Clocks see following table:
+ *
+ * Clock/MHz CONFIG_SYS_ORx_PRELIM
+ * 166 0x.....CA5
+ * 133 0x.....C85
+ * 100 0x.....C65
+ * 83 0x.....FA2
+ * 66 0x.....C82
+ * 50 0x.....C60
+ * 42 0x.....040
+ * 33 0x.....030
+ * 25 0x.....020
+ *
+ */
+#ifdef CONFIG_TQM_BIGFLASH
+#define CONFIG_SYS_BR0_PRELIM 0xE0001801 /* port size 32bit */
+#define CONFIG_SYS_OR0_PRELIM 0xE0000040 /* 512MB Flash */
+#define CONFIG_SYS_BR1_PRELIM 0xC0001801 /* port size 32bit */
+#define CONFIG_SYS_OR1_PRELIM 0xE0000040 /* 512MB Flash */
+#else /* !CONFIG_TQM_BIGFLASH */
+#define CONFIG_SYS_BR0_PRELIM 0xfc001801 /* port size 32bit */
+#define CONFIG_SYS_OR0_PRELIM 0xfc000040 /* 64MB Flash */
+#define CONFIG_SYS_BR1_PRELIM 0xf8001801 /* port size 32bit */
+#define CONFIG_SYS_OR1_PRELIM 0xfc000040 /* 64MB Flash */
+#endif /* CONFIG_TQM_BIGFLASH */
+
+#define CONFIG_SYS_FLASH_CFI /* flash is CFI compat. */
+#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */
+#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector */
+#define CONFIG_SYS_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash*/
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* speed up output to Flash */
+
+#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */
+#define CONFIG_SYS_MAX_FLASH_SECT 512 /* sectors per device */
+#undef CONFIG_SYS_FLASH_CHECKSUM
+#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
+
+#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */