avr32: Retire AVR32 for good

[oweals/u-boot.git] / drivers / spi / Kconfig

diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 452dd4d85b10c69cae16f29c7d133840f1807d79..fe01c737d7111305156895696b99d95c8c208b76 100644 (file)
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -13,6 +13,92 @@ config DM_SPI
          typically use driver-private data instead of extending the
          spi_slave structure.
 
          typically use driver-private data instead of extending the
          spi_slave structure.
 

+if DM_SPI
+
+config ALTERA_SPI
+       bool "Altera SPI driver"
+       help
+         Enable the Altera SPI driver. This driver can be used to
+         access the SPI NOR flash on platforms embedding this Altera
+         IP core. Please find details on the "Embedded Peripherals IP
+         User Guide" of Altera.
+
+config ATH79_SPI
+       bool "Atheros SPI driver"
+       depends on ARCH_ATH79
+       help
+         Enable the Atheros ar7xxx/ar9xxx SoC SPI driver, it was used
+         to access SPI NOR flash and other SPI peripherals. This driver
+         uses driver model and requires a device tree binding to operate.
+         please refer to doc/device-tree-bindings/spi/spi-ath79.txt.
+
+config ATMEL_SPI
+       bool "Atmel SPI driver"
+       depends on ARCH_AT91
+       help
+         This enables driver for the Atmel SPI Controller, present on
+         many AT91 (ARM) chips. This driver can be used to access
+         the SPI Flash, such as AT25DF321.
+
+config CADENCE_QSPI
+       bool "Cadence QSPI driver"
+       help
+         Enable the Cadence Quad-SPI (QSPI) driver. This driver can be
+         used to access the SPI NOR flash on platforms embedding this
+         Cadence IP core.
+
+config DESIGNWARE_SPI
+       bool "Designware SPI driver"
+       help
+         Enable the Designware SPI driver. This driver can be used to
+         access the SPI NOR flash on platforms embedding this Designware
+         IP core.
+
+config EXYNOS_SPI
+       bool "Samsung Exynos SPI driver"
+       help
+         Enable the Samsung Exynos SPI driver. This driver can be used to
+         access the SPI NOR flash on platforms embedding this Samsung
+         Exynos IP core.
+
+config FSL_DSPI
+       bool "Freescale DSPI driver"
+       help
+         Enable the Freescale DSPI driver. This driver can be used to
+         access the SPI NOR flash and SPI Data flash on platforms embedding
+         this Freescale DSPI IP core. LS102xA and Colibri VF50/VF61 platforms
+         use this driver.
+
+config ICH_SPI
+       bool "Intel ICH SPI driver"
+       help
+         Enable the Intel ICH SPI driver. This driver can be used to
+         access the SPI NOR flash on platforms embedding this Intel
+         ICH IP core.
+
+config MVEBU_A3700_SPI
+       bool "Marvell Armada 3700 SPI driver"
+       help
+         Enable the Marvell Armada 3700 SPI driver. This driver can be
+         used to access the SPI NOR flash on platforms embedding this
+         Marvell IP core.
+
+config PIC32_SPI
+       bool "Microchip PIC32 SPI driver"
+       depends on MACH_PIC32
+       help
+         Enable the Microchip PIC32 SPI driver. This driver can be used
+         to access the SPI NOR flash, MMC-over-SPI on platforms based on
+         Microchip PIC32 family devices.
+
+config ROCKCHIP_SPI
+       bool "Rockchip SPI driver"
+       help
+         Enable the Rockchip SPI driver, used to access SPI NOR flash and
+         other SPI peripherals (such as the Chrome OS EC) on Rockchip SoCs.
+         This uses driver model and requires a device tree binding to
+         operate.
+

 config SANDBOX_SPI
        bool "Sandbox SPI driver"
        depends on SANDBOX && DM
 config SANDBOX_SPI
        bool "Sandbox SPI driver"
        depends on SANDBOX && DM


@@ -36,27 +122,49 @@ config SANDBOX_SPI
                        spi-max-frequency = <40000000>;
                        sandbox,filename = "spi.bin";
                };
                        spi-max-frequency = <40000000>;
                        sandbox,filename = "spi.bin";
                };

-       };
+         };

 
 

-config DESIGNWARE_SPI
-       bool "Designware SPI driver"
-       depends on DM_SPI
+config STM32_QSPI
+       bool "STM32F7 QSPI driver"
+       depends on STM32F7

        help
        help

-         Enable the Designware SPI driver. This driver can be used to
-         access the SPI NOR flash on platforms embedding this Designware
+         Enable the STM32F7 Quad-SPI (QSPI) driver. This driver can be
+         used to access the SPI NOR flash chips on platforms embedding
+         this ST IP core.
+
+config TEGRA114_SPI
+       bool "nVidia Tegra114 SPI driver"
+       help
+         Enable the nVidia Tegra114 SPI driver. This driver can be used to
+         access the SPI NOR flash on platforms embedding this nVidia Tegra114

          IP core.
 
          IP core.
 

-config CADENCE_QSPI
-       bool "Cadence QSPI driver"
-       depends on DM_SPI
+         This controller is different than the older SoCs SPI controller and
+         also register interface get changed with this controller.
+
+config TEGRA20_SFLASH
+       bool "nVidia Tegra20 Serial Flash controller driver"

        help
        help

-         Enable the Cadence Quad-SPI (QSPI) driver. This driver can be
-         used to access the SPI NOR flash on platforms embedding this
-         Cadence IP core.
+         Enable the nVidia Tegra20 Serial Flash controller driver. This driver
+         can be used to access the SPI NOR flash on platforms embedding this
+         nVidia Tegra20 IP core.
+
+config TEGRA20_SLINK
+       bool "nVidia Tegra20/Tegra30 SLINK driver"
+       help
+         Enable the nVidia Tegra20/Tegra30 SLINK driver. This driver can
+         be used to access the SPI NOR flash on platforms embedding this
+         nVidia Tegra20/Tegra30 IP cores.
+
+config TEGRA210_QSPI
+       bool "nVidia Tegra210 QSPI driver"
+       help
+         Enable the Tegra Quad-SPI (QSPI) driver for T210. This driver
+         be used to access SPI chips on platforms embedding this
+         NVIDIA Tegra210 IP core.

 
 config XILINX_SPI
        bool "Xilinx SPI driver"
 
 config XILINX_SPI
        bool "Xilinx SPI driver"

-       depends on DM_SPI

        help
          Enable the Xilinx SPI driver from the Xilinx EDK. This SPI
          controller support 8 bit SPI transfers only, with or w/o FIFO.
        help
          Enable the Xilinx SPI driver from the Xilinx EDK. This SPI
          controller support 8 bit SPI transfers only, with or w/o FIFO.


@@ -65,10 +173,54 @@ config XILINX_SPI
 
 config ZYNQ_SPI
        bool "Zynq SPI driver"
 
 config ZYNQ_SPI
        bool "Zynq SPI driver"

-       depends on DM_SPI && (ARCH_ZYNQ || TARGET_XILINX_ZYNQMP)
+       depends on ARCH_ZYNQ || ARCH_ZYNQMP

        help
          Enable the Zynq SPI driver. This driver can be used to
          access the SPI NOR flash on platforms embedding this Zynq
          SPI IP core.
 
        help
          Enable the Zynq SPI driver. This driver can be used to
          access the SPI NOR flash on platforms embedding this Zynq
          SPI IP core.
 

+config ZYNQ_QSPI
+       bool "Zynq QSPI driver"
+       depends on ARCH_ZYNQ
+       help
+         Enable the Zynq Quad-SPI (QSPI) driver. This driver can be
+         used to access the SPI NOR flash on platforms embedding this
+         Zynq QSPI IP core. This IP is used to connect the flash in
+         4-bit qspi, 8-bit dual stacked and shared 4-bit dual parallel.
+
+config OMAP3_SPI
+       bool "McSPI driver for OMAP"
+       help
+         SPI master controller for OMAP24XX and later Multichannel SPI
+         (McSPI). This driver be used to access SPI chips on platforms
+         embedding this OMAP3 McSPI IP core.
+
+endif # if DM_SPI
+
+config SOFT_SPI
+       bool "Soft SPI driver"
+       help
+        Enable Soft SPI driver. This driver is to use GPIO simulate
+        the SPI protocol.
+
+config FSL_ESPI
+       bool "Freescale eSPI driver"
+       help
+         Enable the Freescale eSPI driver. This driver can be used to
+         access the SPI interface and SPI NOR flash on platforms embedding
+         this Freescale eSPI IP core.
+
+config FSL_QSPI
+       bool "Freescale QSPI driver"
+       help
+         Enable the Freescale Quad-SPI (QSPI) driver. This driver can be
+         used to access the SPI NOR flash on platforms embedding this
+         Freescale IP core.
+
+config TI_QSPI
+       bool "TI QSPI driver"
+       help
+         Enable the TI Quad-SPI (QSPI) driver for DRA7xx and AM43xx evms.
+         This driver support spi flash single, quad and memory reads.
+

 endmenu # menu "SPI Support"
 endmenu # menu "SPI Support"