+ return tmplong & 1 ? tmplong & ~3 : tmplong & ~15;
+}
+
+static int _ich6_gpio_set_value(uint16_t base, unsigned offset, int value)
+{
+ u32 val;
+
+ val = inl(base);
+ if (value)
+ val |= (1UL << offset);
+ else
+ val &= ~(1UL << offset);
+ outl(val, base);
+
+ return 0;
+}
+
+static int _ich6_gpio_set_function(uint16_t base, unsigned offset, int func)
+{
+ u32 val;
+
+ if (func) {
+ val = inl(base);
+ val |= (1UL << offset);
+ outl(val, base);
+ } else {
+ val = inl(base);
+ val &= ~(1UL << offset);
+ outl(val, base);
+ }
+
+ return 0;
+}
+
+static int _ich6_gpio_set_direction(uint16_t base, unsigned offset, int dir)
+{
+ u32 val;
+
+ if (!dir) {
+ val = inl(base);
+ val |= (1UL << offset);
+ outl(val, base);
+ } else {
+ val = inl(base);
+ val &= ~(1UL << offset);
+ outl(val, base);
+ }
+
+ return 0;
+}
+
+static int _gpio_ich6_pinctrl_cfg_pin(s32 gpiobase, s32 iobase, int pin_node)
+{
+ u32 gpio_offset[2];
+ int pad_offset;
+ int val;
+ int ret;
+ const void *prop;
+
+ /*
+ * GPIO node is not mandatory, so we only do the
+ * pinmuxing if the node exist.
+ */
+ ret = fdtdec_get_int_array(gd->fdt_blob, pin_node, "gpio-offset",
+ gpio_offset, 2);
+ if (!ret) {
+ /* Do we want to force the GPIO mode? */
+ prop = fdt_getprop(gd->fdt_blob, pin_node, "mode-gpio",
+ NULL);
+ if (prop)
+ _ich6_gpio_set_function(GPIO_USESEL_OFFSET
+ (gpiobase) +
+ gpio_offset[0],
+ gpio_offset[1], 1);
+
+ val =
+ fdtdec_get_int(gd->fdt_blob, pin_node, "direction", -1);
+ if (val != -1)
+ _ich6_gpio_set_direction(GPIO_IOSEL_OFFSET
+ (gpiobase) +
+ gpio_offset[0],
+ gpio_offset[1], val);
+
+ val =
+ fdtdec_get_int(gd->fdt_blob, pin_node, "output-value", -1);
+ if (val != -1)
+ _ich6_gpio_set_value(GPIO_LVL_OFFSET(gpiobase)
+ + gpio_offset[0],
+ gpio_offset[1], val);
+ }
+
+ /* if iobase is present, let's configure the pad */
+ if (iobase != -1) {
+ int iobase_addr;
+
+ /*
+ * The offset for the same pin for the IOBASE and GPIOBASE are
+ * different, so instead of maintaining a lookup table,
+ * the device tree should provide directly the correct
+ * value for both mapping.
+ */
+ pad_offset =
+ fdtdec_get_int(gd->fdt_blob, pin_node, "pad-offset", -1);
+ if (pad_offset == -1) {
+ debug("%s: Invalid register io offset %d\n",
+ __func__, pad_offset);
+ return -EINVAL;
+ }
+
+ /* compute the absolute pad address */
+ iobase_addr = iobase + pad_offset;
+
+ /*
+ * Do we need to set a specific function mode?
+ * If someone put also 'mode-gpio', this option will
+ * be just ignored by the controller
+ */
+ val = fdtdec_get_int(gd->fdt_blob, pin_node, "mode-func", -1);
+ if (val != -1)
+ clrsetbits_le32(iobase_addr, IOPAD_MODE_MASK, val);
+
+ /* Configure the pull-up/down if needed */
+ val = fdtdec_get_int(gd->fdt_blob, pin_node, "pull-assign", -1);
+ if (val != -1)
+ clrsetbits_le32(iobase_addr,
+ IOPAD_PULL_ASSIGN_MASK,
+ val << IOPAD_PULL_ASSIGN_SHIFT);
+
+ val =
+ fdtdec_get_int(gd->fdt_blob, pin_node, "pull-strength", -1);
+ if (val != -1)
+ clrsetbits_le32(iobase_addr,
+ IOPAD_PULL_STRENGTH_MASK,
+ val << IOPAD_PULL_STRENGTH_SHIFT);
+
+ debug("%s: pad cfg [0x%x]: %08x\n", __func__, pad_offset,
+ readl(iobase_addr));
+ }
+
+ return 0;
+}
+
+int gpio_ich6_pinctrl_init(void)
+{
+ int pin_node;
+ int node;
+ int ret;
+ int gpiobase;
+ int iobase_offset;
+ int iobase = -1;
+
+ /*
+ * Get the memory/io base address to configure every pins.
+ * IOBASE is used to configure the mode/pads
+ * GPIOBASE is used to configure the direction and default value
+ */
+ gpiobase = gpio_ich6_get_base(PCI_CFG_GPIOBASE);
+ if (gpiobase < 0) {
+ debug("%s: invalid GPIOBASE address (%08x)\n", __func__,
+ gpiobase);
+ return -EINVAL;
+ }
+
+ /* This is not an error to not have a pinctrl node */
+ node =
+ fdtdec_next_compatible(gd->fdt_blob, 0, COMPAT_INTEL_X86_PINCTRL);
+ if (node <= 0) {
+ debug("%s: no pinctrl node\n", __func__);
+ return 0;
+ }
+
+ /*
+ * Get the IOBASE, this is not mandatory as this is not
+ * supported by all the CPU
+ */
+ iobase_offset = fdtdec_get_int(gd->fdt_blob, node, "io-base", -1);
+ if (iobase_offset == -1) {
+ debug("%s: io-base offset not present\n", __func__);
+ } else {
+ iobase = gpio_ich6_get_base(iobase_offset);
+ if (IS_ERR_VALUE(iobase)) {
+ debug("%s: invalid IOBASE address (%08x)\n", __func__,
+ iobase);
+ return -EINVAL;
+ }
+ }
+
+ for (pin_node = fdt_first_subnode(gd->fdt_blob, node);
+ pin_node > 0;
+ pin_node = fdt_next_subnode(gd->fdt_blob, pin_node)) {
+ /* Configure the pin */
+ ret = _gpio_ich6_pinctrl_cfg_pin(gpiobase, iobase, pin_node);
+ if (ret != 0) {
+ debug("%s: invalid configuration for the pin %d\n",
+ __func__, pin_node);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static int gpio_ich6_ofdata_to_platdata(struct udevice *dev)
+{
+ struct ich6_bank_platdata *plat = dev_get_platdata(dev);
+ u16 gpiobase;
+ int offset;
+
+ gpiobase = gpio_ich6_get_base(PCI_CFG_GPIOBASE);