+int __weak ahci_link_up(struct ahci_probe_ent *probe_ent, u8 port)
+{
+ u32 tmp;
+ int j = 0;
+ void __iomem *port_mmio = probe_ent->port[port].port_mmio;
+
+ /*
+ * Bring up SATA link.
+ * SATA link bringup time is usually less than 1 ms; only very
+ * rarely has it taken between 1-2 ms. Never seen it above 2 ms.
+ */
+ while (j < WAIT_MS_LINKUP) {
+ tmp = readl(port_mmio + PORT_SCR_STAT);
+ tmp &= PORT_SCR_STAT_DET_MASK;
+ if (tmp == PORT_SCR_STAT_DET_PHYRDY)
+ return 0;
+ udelay(1000);
+ j++;
+ }
+ return 1;
+}
+
+#ifdef CONFIG_SUNXI_AHCI
+/* The sunxi AHCI controller requires this undocumented setup */
+static void sunxi_dma_init(void __iomem *port_mmio)
+{
+ clrsetbits_le32(port_mmio + PORT_P0DMACR, 0x0000ff00, 0x00004400);
+}
+#endif
+
+int ahci_reset(void __iomem *base)
+{
+ int i = 1000;
+ u32 __iomem *host_ctl_reg = base + HOST_CTL;
+ u32 tmp = readl(host_ctl_reg); /* global controller reset */
+
+ if ((tmp & HOST_RESET) == 0)
+ writel_with_flush(tmp | HOST_RESET, host_ctl_reg);
+
+ /*
+ * reset must complete within 1 second, or
+ * the hardware should be considered fried.
+ */
+ do {
+ udelay(1000);
+ tmp = readl(host_ctl_reg);
+ i--;
+ } while ((i > 0) && (tmp & HOST_RESET));
+
+ if (i == 0) {
+ printf("controller reset failed (0x%x)\n", tmp);
+ return -1;
+ }
+
+ return 0;
+}