+In addition, the t3corp board defines the routine thusly:
+
+void flash_cmd_reset(flash_info_t *info)
+{
+ /*
+ * FLASH at address CONFIG_SYS_FLASH_BASE is a Spansion chip and
+ * needs the Spansion type reset commands. The other flash chip
+ * is located behind a FPGA (Xilinx DS617) and needs the Intel type
+ * reset command.
+ */
+ if (info->start[0] == CONFIG_SYS_FLASH_BASE)
+ flash_write_cmd(info, 0, 0, AMD_CMD_RESET);
+ else
+ flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
+}
+