Merge branch '2019-08-26-master-imports'

[oweals/u-boot.git] / common / spl / Kconfig

diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index 54154b93c9498a21ee114e7aa96bc0b87ec25022..f467eca2be729874b385ac04896272718b87a6d9 100644 (file)
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -62,6 +62,25 @@ config SPL_SIZE_LIMIT_PROVIDE_STACK
          of SRAM available for SPL when the stack required before reolcation
          uses this SRAM, too.
 
          of SRAM available for SPL when the stack required before reolcation
          uses this SRAM, too.
 

+config SPL_SYS_STACK_F_CHECK_BYTE
+       hex
+       default 0xaa
+       help
+         Constant used to check the stack
+
+config SPL_SYS_REPORT_STACK_F_USAGE
+       depends on SPL_SIZE_LIMIT_PROVIDE_STACK != 0
+       bool "Check and report stack usage in SPL before relocation"
+       help
+         If this option is enabled, the initial SPL stack is filled with 0xaa
+         very early, up to the size configured with
+         SPL_SIZE_LIMIT_PROVIDE_STACK.
+         Later when SPL is done using this initial stack and switches to a
+         stack in DRAM, the actually used size of this initial stack is
+         reported by examining the memory and searching for the lowest
+         occurrence of non 0xaa bytes.
+         This default implementation works for stacks growing down only.
+

 menu "PowerPC SPL Boot options"
        depends on PPC && (SUPPORT_SPL && !SPL_FRAMEWORK)
 
 menu "PowerPC SPL Boot options"
        depends on PPC && (SUPPORT_SPL && !SPL_FRAMEWORK)
 


@@ -189,6 +208,7 @@ config SPL_SYS_MALLOC_SIMPLE
 config TPL_SYS_MALLOC_SIMPLE
        bool
        prompt "Only use malloc_simple functions in the TPL"
 config TPL_SYS_MALLOC_SIMPLE
        bool
        prompt "Only use malloc_simple functions in the TPL"

+       depends on TPL

        help
          Say Y here to only use the *_simple malloc functions from
          malloc_simple.c, rather then using the versions from dlmalloc.c;
        help
          Say Y here to only use the *_simple malloc functions from
          malloc_simple.c, rather then using the versions from dlmalloc.c;


@@ -242,6 +262,7 @@ config SPL_BANNER_PRINT
 
 config TPL_BANNER_PRINT
        bool "Enable output of the TPL banner 'U-Boot TPL ...'"
 
 config TPL_BANNER_PRINT
        bool "Enable output of the TPL banner 'U-Boot TPL ...'"

+       depends on TPL

        default y
        help
          If this option is enabled, SPL will not print the banner with version
        default y
        help
          If this option is enabled, SPL will not print the banner with version


@@ -414,6 +435,7 @@ config SPL_HASH_SUPPORT
 
 config TPL_HASH_SUPPORT
        bool "Support hashing drivers in TPL"
 
 config TPL_HASH_SUPPORT
        bool "Support hashing drivers in TPL"

+       depends on TPL

        select SHA1
        select SHA256
        help
        select SHA1
        select SHA256
        help


@@ -981,6 +1003,14 @@ config SPL_SPI_LOAD
 
 endif # SPL_SPI_FLASH_SUPPORT
 
 
 endif # SPL_SPI_FLASH_SUPPORT
 

+config SYS_SPI_U_BOOT_OFFS
+       hex "address of u-boot payload in SPI flash"
+       default 0x0
+       depends on SPL_SPI_LOAD || SPL_SPI_SUNXI
+       help
+        Address within SPI-Flash from where the u-boot payload is fetched
+        from.
+

 config SPL_SPI_SUPPORT
        bool "Support SPI drivers"
        help
 config SPL_SPI_SUPPORT
        bool "Support SPI drivers"
        help


@@ -1127,6 +1157,23 @@ config SPL_OPTEE
          OP-TEE is an open source Trusted OS  which is loaded by SPL.
          More detail at: https://github.com/OP-TEE/optee_os
 
          OP-TEE is an open source Trusted OS  which is loaded by SPL.
          More detail at: https://github.com/OP-TEE/optee_os
 

+config SPL_OPENSBI
+       bool "Support RISC-V OpenSBI"
+       depends on RISCV && SPL_RISCV_MMODE && RISCV_SMODE
+       help
+         OpenSBI is an open-source implementation of the RISC-V Supervisor Binary
+         Interface (SBI) specification. U-Boot supports the OpenSBI FW_DYNAMIC
+         firmware. It is loaded and started by U-Boot SPL.
+
+         More details are available at https://github.com/riscv/opensbi and
+         https://github.com/riscv/riscv-sbi-doc
+
+config SPL_OPENSBI_LOAD_ADDR
+       hex "OpenSBI load address"
+       depends on SPL_OPENSBI
+       help
+         Load address of the OpenSBI binary.
+

 config TPL
        bool
        depends on SUPPORT_TPL
 config TPL
        bool
        depends on SUPPORT_TPL