sandbox: Boot in U-Boot through the standard call

[oweals/u-boot.git] / common / Kconfig

diff --git a/common/Kconfig b/common/Kconfig
index 4d8cae96109ad4e1d04dd385d469a37129a8023a..57bd16d9623c091196d102f0405df040603b5d78 100644 (file)
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -27,6 +27,15 @@ config SPL_BOOTSTAGE
          information when SPL finishes and load it when U-Boot proper starts
          up.
 
          information when SPL finishes and load it when U-Boot proper starts
          up.
 

+config TPL_BOOTSTAGE
+       bool "Boot timing and reported in TPL"
+       depends on BOOTSTAGE
+       help
+         Enable recording of boot time in SPL. To make this visible to U-Boot
+         proper, enable BOOTSTAGE_STASH as well. This will stash the timing
+         information when TPL finishes and load it when U-Boot proper starts
+         up.
+

 config BOOTSTAGE_REPORT
        bool "Display a detailed boot timing report before booting the OS"
        depends on BOOTSTAGE
 config BOOTSTAGE_REPORT
        bool "Display a detailed boot timing report before booting the OS"
        depends on BOOTSTAGE


@@ -46,15 +55,6 @@ config BOOTSTAGE_REPORT
                 29,916,167 26,005,792  bootm_start
                 30,361,327    445,160  start_kernel
 
                 29,916,167 26,005,792  bootm_start
                 30,361,327    445,160  start_kernel
 

-config BOOTSTAGE_USER_COUNT
-       int "Number of boot ID numbers available for user use"
-       default 20
-       help
-         This is the number of available user bootstage records.
-         Each time you call bootstage_mark(BOOTSTAGE_ID_ALLOC, ...)
-         a new ID will be allocated from this stash. If you exceed
-         the limit, recording will stop.
-

 config BOOTSTAGE_RECORD_COUNT
        int "Number of boot stage records to store"
        default 30
 config BOOTSTAGE_RECORD_COUNT
        int "Number of boot stage records to store"
        default 30


@@ -62,6 +62,13 @@ config BOOTSTAGE_RECORD_COUNT
          This is the size of the bootstage record list and is the maximum
          number of bootstage records that can be recorded.
 
          This is the size of the bootstage record list and is the maximum
          number of bootstage records that can be recorded.
 

+config SPL_BOOTSTAGE_RECORD_COUNT
+       int "Number of boot stage records to store for SPL"
+       default 5
+       help
+         This is the size of the bootstage record list and is the maximum
+         number of bootstage records that can be recorded.
+

 config BOOTSTAGE_FDT
        bool "Store boot timing information in the OS device tree"
        depends on BOOTSTAGE
 config BOOTSTAGE_FDT
        bool "Store boot timing information in the OS device tree"
        depends on BOOTSTAGE


@@ -127,6 +134,7 @@ config NOR_BOOT
 config NAND_BOOT
        bool "Support for booting from NAND flash"
        default n
 config NAND_BOOT
        bool "Support for booting from NAND flash"
        default n

+       imply NAND

        help
          Enabling this will make a U-Boot binary that is capable of being
          booted via NAND flash. This is not a must, some SoCs need this,
        help
          Enabling this will make a U-Boot binary that is capable of being
          booted via NAND flash. This is not a must, some SoCs need this,


@@ -135,6 +143,7 @@ config NAND_BOOT
 config ONENAND_BOOT
        bool "Support for booting from ONENAND"
        default n
 config ONENAND_BOOT
        bool "Support for booting from ONENAND"
        default n

+       imply NAND

        help
          Enabling this will make a U-Boot binary that is capable of being
          booted via ONENAND. This is not a must, some SoCs need this,
        help
          Enabling this will make a U-Boot binary that is capable of being
          booted via ONENAND. This is not a must, some SoCs need this,


@@ -184,6 +193,10 @@ config BOOTDELAY
          set to -1 to disable autoboot.
          set to -2 to autoboot with no delay and not check for abort
 
          set to -1 to disable autoboot.
          set to -2 to autoboot with no delay and not check for abort
 

+         If this value is >= 0 then it is also used for the default delay
+         before starting the default entry in bootmenu. If it is < 0 then
+         a default value of 10s is used.
+

          See doc/README.autoboot for details.
 
 config USE_BOOTARGS
          See doc/README.autoboot for details.
 
 config USE_BOOTARGS


@@ -202,6 +215,23 @@ config BOOTARGS
          CONFIG_BOOTARGS goes into the environment value "bootargs". Note that
          this value will also override the "chosen" node in FDT blob.
 
          CONFIG_BOOTARGS goes into the environment value "bootargs". Note that
          this value will also override the "chosen" node in FDT blob.
 

+config USE_BOOTCOMMAND
+       bool "Enable a default value for bootcmd"
+       help
+         Provide a default value for the bootcmd entry in the environment.  If
+         autoboot is enabled this is what will be run automatically.  Enable
+         this option to be able to specify CONFIG_BOOTCOMMAND as a string.  If
+         this option is disabled, CONFIG_BOOTCOMMAND will be undefined and
+         won't take any space in U-Boot image.
+
+config BOOTCOMMAND
+       string "bootcmd value"
+       depends on USE_BOOTCOMMAND
+       default "run distro_bootcmd" if DISTRO_DEFAULTS
+       help
+         This is the string of commands that will be used as bootcmd and if
+         AUTOBOOT is set, automatically run.
+

 menu "Console"
 
 config MENU
 menu "Console"
 
 config MENU


@@ -238,11 +268,41 @@ config CONSOLE_RECORD_IN_SIZE
          The buffer is allocated immediately after the malloc() region is
          ready.
 
          The buffer is allocated immediately after the malloc() region is
          ready.
 

+config DISABLE_CONSOLE
+       bool "Add functionality to disable console completely"
+       help
+               Disable console (in & out).
+

 config IDENT_STRING
        string "Board specific string to be added to uboot version string"
        help
          This options adds the board specific name to u-boot version.
 
 config IDENT_STRING
        string "Board specific string to be added to uboot version string"
        help
          This options adds the board specific name to u-boot version.
 

+config LOGLEVEL
+       int "loglevel"
+       default 4
+       range 0 8
+       help
+         All Messages with a loglevel smaller than the console loglevel will
+         be compiled in. The loglevels are defined as follows:
+
+         0 (KERN_EMERG)          system is unusable
+         1 (KERN_ALERT)          action must be taken immediately
+         2 (KERN_CRIT)           critical conditions
+         3 (KERN_ERR)            error conditions
+         4 (KERN_WARNING)        warning conditions
+         5 (KERN_NOTICE)         normal but significant condition
+         6 (KERN_INFO)           informational
+         7 (KERN_DEBUG)          debug-level messages
+
+config SPL_LOGLEVEL
+       int
+       default LOGLEVEL
+
+config TPL_LOGLEVEL
+       int
+       default LOGLEVEL
+

 config SILENT_CONSOLE
        bool "Support a silent console"
        help
 config SILENT_CONSOLE
        bool "Support a silent console"
        help


@@ -384,27 +444,164 @@ config SYS_STDIO_DEREGISTER
 
 endmenu
 
 
 endmenu
 

-config DTB_RESELECT
-       bool "Support swapping dtbs at a later point in boot"
-       depends on FIT_EMBED
-       help
-         It is possible during initial boot you may need to use a generic
-         dtb until you can fully determine the board your running on. This
-         config allows boards to implement a function at a later point
-         during boot to switch to the "correct" dtb.
+menu "Logging"
+
+config LOG
+       bool "Enable logging support"
+       depends on DM
+       help
+         This enables support for logging of status and debug messages. These
+         can be displayed on the console, recorded in a memory buffer, or
+         discarded if not needed. Logging supports various categories and
+         levels of severity.
+
+config SPL_LOG
+       bool "Enable logging support in SPL"
+       depends on LOG
+       help
+         This enables support for logging of status and debug messages. These
+         can be displayed on the console, recorded in a memory buffer, or
+         discarded if not needed. Logging supports various categories and
+         levels of severity.
+
+config TPL_LOG
+       bool "Enable logging support in TPL"
+       depends on LOG
+       help
+         This enables support for logging of status and debug messages. These
+         can be displayed on the console, recorded in a memory buffer, or
+         discarded if not needed. Logging supports various categories and
+         levels of severity.
+
+config LOG_MAX_LEVEL
+       int "Maximum log level to record"
+       depends on LOG
+       default 5
+       help
+         This selects the maximum log level that will be recorded. Any value
+         higher than this will be ignored. If possible log statements below
+         this level will be discarded at build time. Levels:
+
+           0 - panic
+           1 - critical
+           2 - error
+           3 - warning
+           4 - note
+           5 - info
+           6 - detail
+           7 - debug
+
+config SPL_LOG_MAX_LEVEL
+       int "Maximum log level to record in SPL"
+       depends on SPL_LOG
+       default 3
+       help
+         This selects the maximum log level that will be recorded. Any value
+         higher than this will be ignored. If possible log statements below
+         this level will be discarded at build time. Levels:
+
+           0 - panic
+           1 - critical
+           2 - error
+           3 - warning
+           4 - note
+           5 - info
+           6 - detail
+           7 - debug
+
+config TPL_LOG_MAX_LEVEL
+       int "Maximum log level to record in TPL"
+       depends on TPL_LOG
+       default 3
+       help
+         This selects the maximum log level that will be recorded. Any value
+         higher than this will be ignored. If possible log statements below
+         this level will be discarded at build time. Levels:
+
+           0 - panic
+           1 - critical
+           2 - error
+           3 - warning
+           4 - note
+           5 - info
+           6 - detail
+           7 - debug
+
+config LOG_CONSOLE
+       bool "Allow log output to the console"
+       depends on LOG
+       default y
+       help
+         Enables a log driver which writes log records to the console.
+         Generally the console is the serial port or LCD display. Only the
+         log message is shown - other details like level, category, file and
+         line number are omitted.
+
+config SPL_LOG_CONSOLE
+       bool "Allow log output to the console in SPL"
+       depends on SPL_LOG
+       default y
+       help
+         Enables a log driver which writes log records to the console.
+         Generally the console is the serial port or LCD display. Only the
+         log message is shown - other details like level, category, file and
+         line number are omitted.
+
+config TPL_LOG_CONSOLE
+       bool "Allow log output to the console in SPL"
+       depends on TPL_LOG
+       default y
+       help
+         Enables a log driver which writes log records to the console.
+         Generally the console is the serial port or LCD display. Only the
+         log message is shown - other details like level, category, file and
+         line number are omitted.
+
+config LOG_TEST
+       bool "Provide a test for logging"
+       depends on LOG
+       default y if SANDBOX
+       help
+         This enables a 'log test' command to test logging. It is normally
+         executed from a pytest and simply outputs logging information
+         in various different ways to test that the logging system works
+         correctly with varoius settings.
+
+config LOG_ERROR_RETURN
+       bool "Log all functions which return an error"
+       depends on LOG
+       help
+         When an error is returned in U-Boot it is sometimes difficult to
+         figure out the root cause. For eaxmple, reading from SPI flash may
+         fail due to a problem in the SPI controller or due to the flash part
+         not returning the expected information. This option changes
+         log_ret() to log any errors it sees. With this option disabled,
+         log_ret() is a nop.
+
+         You can add log_ret() to all functions which return an error code.
+
+endmenu

 
 

-config FIT_EMBED
-       bool "Support a FIT image embedded in the U-boot image"
+config SUPPORT_RAW_INITRD
+       bool "Enable raw initrd images"

        help
        help

-         This option provides hooks to allow U-boot to parse an
-         appended FIT image and enable board specific code to then select
-         the correct DTB to be used.
+         Note, defining the SUPPORT_RAW_INITRD allows user to supply
+         kernel with raw initrd images. The syntax is slightly different, the
+         address of the initrd must be augmented by it's size, in the following
+         format: "<initrd address>:<initrd size>".

 
 config DEFAULT_FDT_FILE
        string "Default fdt file"
        help
          This option is used to set the default fdt file to boot OS.
 
 
 config DEFAULT_FDT_FILE
        string "Default fdt file"
        help
          This option is used to set the default fdt file to boot OS.
 

+config MISC_INIT_R
+       bool "Execute Misc Init"
+       default y if ARCH_KEYSTONE || ARCH_SUNXI || MPC85xx
+       default y if ARCH_OMAP2PLUS && !AM33XX
+       help
+         Enabling this option calls 'misc_init_r' function
+

 config VERSION_VARIABLE
        bool "add U-Boot environment variable vers"
        default n
 config VERSION_VARIABLE
        bool "add U-Boot environment variable vers"
        default n


@@ -416,7 +613,7 @@ config VERSION_VARIABLE
          next reset.
 
 config BOARD_LATE_INIT
          next reset.
 
 config BOARD_LATE_INIT

-       bool
+       bool "Execute Board late init"

        help
          Sometimes board require some initialization code that might
          require once the actual init done, example saving board specific env,
        help
          Sometimes board require some initialization code that might
          require once the actual init done, example saving board specific env,


@@ -427,20 +624,27 @@ config BOARD_LATE_INIT
 
 config DISPLAY_CPUINFO
        bool "Display information about the CPU during start up"
 
 config DISPLAY_CPUINFO
        bool "Display information about the CPU during start up"

-       default y if ARM || NIOS2 || X86 || XTENSA
+       default y if ARC|| ARM || NIOS2 || X86 || XTENSA || M68K

        help
          Display information about the CPU that U-Boot is running on
          when U-Boot starts up. The function print_cpuinfo() is called
          to do this.
 
 config DISPLAY_BOARDINFO
        help
          Display information about the CPU that U-Boot is running on
          when U-Boot starts up. The function print_cpuinfo() is called
          to do this.
 
 config DISPLAY_BOARDINFO

-       bool "Display information about the board during start up"
-       default y if ARM || M68K || MIPS || PPC || SANDBOX || XTENSA
+       bool "Display information about the board during early start up"
+       default y if ARC || ARM || M68K || MIPS || PPC || SANDBOX || XTENSA

        help
          Display information about the board that U-Boot is running on
          when U-Boot starts up. The board function checkboard() is called
          to do this.
 
        help
          Display information about the board that U-Boot is running on
          when U-Boot starts up. The board function checkboard() is called
          to do this.
 

+config DISPLAY_BOARDINFO_LATE
+       bool "Display information about the board during late start up"
+       help
+         Display information about the board that U-Boot is running on after
+         the relocation phase. The board function checkboard() is called to do
+         this.
+

 menu "Start-up hooks"
 
 config ARCH_EARLY_INIT_R
 menu "Start-up hooks"
 
 config ARCH_EARLY_INIT_R


@@ -468,6 +672,22 @@ config BOARD_EARLY_INIT_F
          Note that the normal serial console is not yet set up, but the
          debug UART will be available if enabled.
 
          Note that the normal serial console is not yet set up, but the
          debug UART will be available if enabled.
 

+config BOARD_EARLY_INIT_R
+       bool "Call board-specific init after relocation"
+       help
+         Some boards need to perform initialisation as directly after
+         relocation. With this option, U-Boot calls board_early_init_r()
+         in the post-relocation init sequence.
+
+config LAST_STAGE_INIT
+       bool "Call board-specific as last setup step"
+       help
+         Some boards need to perform initialisation immediately before control
+         is passed to the command-line interpreter (e.g. for initializations
+         that depend on later phases in the init sequence). With this option,
+         U-Boot calls last_stage_init() before the command-line interpreter is
+         started.
+

 endmenu
 
 menu "Security support"
 endmenu
 
 menu "Security support"


@@ -480,6 +700,102 @@ config HASH
          and the algorithms it supports are defined in common/hash.c. See
          also CMD_HASH for command-line access.
 
          and the algorithms it supports are defined in common/hash.c. See
          also CMD_HASH for command-line access.
 

+config AVB_VERIFY
+       bool "Build Android Verified Boot operations"
+       depends on LIBAVB && FASTBOOT
+       depends on PARTITION_UUIDS
+       help
+         This option enables compilation of bootloader-dependent operations,
+         used by Android Verified Boot 2.0 library (libavb). Includes:
+           * Helpers to process strings in order to build OS bootargs.
+           * Helpers to access MMC, similar to drivers/fastboot/fb_mmc.c.
+           * Helpers to alloc/init/free avb ops.
+
+config SPL_HASH
+       bool # "Support hashing API (SHA1, SHA256, etc.)"
+       help
+         This provides a way to hash data in memory using various supported
+         algorithms (such as SHA1, MD5, CRC32). The API is defined in hash.h
+         and the algorithms it supports are defined in common/hash.c. See
+         also CMD_HASH for command-line access.
+
+config TPL_HASH
+       bool # "Support hashing API (SHA1, SHA256, etc.)"
+       help
+         This provides a way to hash data in memory using various supported
+         algorithms (such as SHA1, MD5, CRC32). The API is defined in hash.h
+         and the algorithms it supports are defined in common/hash.c. See
+         also CMD_HASH for command-line access.
+
+endmenu
+
+menu "Update support"
+
+config UPDATE_TFTP
+       bool "Auto-update using fitImage via TFTP"
+       depends on FIT
+       help
+         This option allows performing update of NOR with data in fitImage
+         sent via TFTP boot.
+
+config UPDATE_TFTP_CNT_MAX
+       int "The number of connection retries during auto-update"
+       default 0
+       depends on UPDATE_TFTP
+
+config UPDATE_TFTP_MSEC_MAX
+       int "Delay in mSec to wait for the TFTP server during auto-update"
+       default 100
+       depends on UPDATE_TFTP
+
+endmenu
+
+menu "Blob list"
+
+config BLOBLIST
+       bool "Support for a bloblist"
+       help
+         This enables support for a bloblist in U-Boot, which can be passed
+         from TPL to SPL to U-Boot proper (and potentially to Linux). The
+         blob list supports multiple binary blobs of data, each with a tag,
+         so that different U-Boot components can store data which can survive
+         through to the next stage of the boot.
+
+config SPL_BLOBLIST
+       bool "Support for a bloblist in SPL"
+       depends on BLOBLIST
+       default y if SPL
+       help
+         This enables a bloblist in SPL. If this is the first part of U-Boot
+         to run, then the bloblist is set up in SPL and passed to U-Boot
+         proper. If TPL also has a bloblist, then SPL uses the one from there.
+
+config TPL_BLOBLIST
+       bool "Support for a bloblist in TPL"
+       depends on BLOBLIST
+       default y if TPL
+       help
+         This enables a bloblist in TPL. The bloblist is set up in TPL and
+         passed to SPL and U-Boot proper.
+
+config BLOBLIST_SIZE
+       hex "Size of bloblist"
+       depends on BLOBLIST
+       default 0x400
+       help
+         Sets the size of the bloblist in bytes. This must include all
+         overhead (alignment, bloblist header, record header). The bloblist
+         is set up in the first part of U-Boot to run (TPL, SPL or U-Boot
+         proper), and this sane bloblist is used for subsequent stages.
+
+config BLOBLIST_ADDR
+       hex "Address of bloblist"
+       depends on BLOBLIST
+       default 0xe000 if SANDBOX
+       help
+         Sets the address of the bloblist, set up by the first part of U-Boot
+         which runs. Subsequent U-Boot stages typically use the same address.
+

 endmenu
 
 source "common/spl/Kconfig"
 endmenu
 
 source "common/spl/Kconfig"