tiny-printf: Support %i

[oweals/u-boot.git] / cmd / Kconfig

diff --git a/cmd/Kconfig b/cmd/Kconfig
index faa133da650a05017235c8b34089c60de8ca3c39..157a33081ff144bd3914bc8b3bb0f7f17319c8b4 100644 (file)
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -190,6 +190,20 @@ comment "Commands"
 
 menu "Info commands"
 
 
 menu "Info commands"
 

+config CMD_ACPI
+       bool "acpi"
+       default y if ACPIGEN
+       help
+         List and dump ACPI tables. ACPI (Advanced Configuration and Power
+         Interface) is used mostly on x86 for providing information to the
+         Operating System about devices in the system. The tables are set up
+         by the firmware, typically U-Boot but possibly an earlier firmware
+         module, if U-Boot is chain-loaded from something else. ACPI tables
+         can also include code, to perform hardware-specific tasks required
+         by the Operating Systems. This allows some amount of separation
+         between the firmware and OS, and is particularly useful when you
+         want to make hardware changes without the OS needing to be adjusted.
+

 config CMD_BDI
        bool "bdinfo"
        default y
 config CMD_BDI
        bool "bdinfo"
        default y


@@ -770,6 +784,13 @@ config CMD_LZMADEC
          Support decompressing an LZMA (Lempel-Ziv-Markov chain algorithm)
          image from memory.
 
          Support decompressing an LZMA (Lempel-Ziv-Markov chain algorithm)
          image from memory.
 

+config CMD_UNLZ4
+       bool "unlz4"
+       default y if CMD_BOOTI
+       select LZ4
+       help
+         Support decompressing an LZ4 image from memory region.
+

 config CMD_UNZIP
        bool "unzip"
        default y if CMD_BOOTI
 config CMD_UNZIP
        bool "unzip"
        default y if CMD_BOOTI


@@ -1053,21 +1074,34 @@ config CMD_MMC
        help
          MMC memory mapped support.
 
        help
          MMC memory mapped support.
 

+if CMD_MMC
+
+config CMD_BKOPS_ENABLE
+       bool "mmc bkops enable"
+       depends on CMD_MMC
+       default n
+       help
+         Enable command for setting manual background operations handshake
+         on a eMMC device. The feature is optionally available on eMMC devices
+         conforming to standard >= 4.41.
+

 config CMD_MMC_RPMB
        bool "Enable support for RPMB in the mmc command"
 config CMD_MMC_RPMB
        bool "Enable support for RPMB in the mmc command"

-       depends on CMD_MMC
+       depends on SUPPORT_EMMC_RPMB

        help
          Enable the commands for reading, writing and programming the
          key for the Replay Protection Memory Block partition in eMMC.
 
 config CMD_MMC_SWRITE
        bool "mmc swrite"
        help
          Enable the commands for reading, writing and programming the
          key for the Replay Protection Memory Block partition in eMMC.
 
 config CMD_MMC_SWRITE
        bool "mmc swrite"

-       depends on CMD_MMC && MMC_WRITE
+       depends on MMC_WRITE

        select IMAGE_SPARSE
        help
          Enable support for the "mmc swrite" command to write Android sparse
          images to eMMC.
 
        select IMAGE_SPARSE
        help
          Enable support for the "mmc swrite" command to write Android sparse
          images to eMMC.
 

+endif
+

 config CMD_MTD
        bool "mtd"
        depends on MTD
 config CMD_MTD
        bool "mtd"
        depends on MTD


@@ -1600,15 +1634,6 @@ config CMD_BSP
          option provides a way to control this. The commands that are enabled
          vary depending on the board.
 
          option provides a way to control this. The commands that are enabled
          vary depending on the board.
 

-config CMD_BKOPS_ENABLE
-       bool "mmc bkops enable"
-       depends on CMD_MMC
-       default n
-       help
-         Enable command for setting manual background operations handshake
-         on a eMMC device. The feature is optionally available on eMMC devices
-         conforming to standard >= 4.41.
-

 config CMD_BLOCK_CACHE
        bool "blkcache - control and stats for block cache"
        depends on BLOCK_CACHE
 config CMD_BLOCK_CACHE
        bool "blkcache - control and stats for block cache"
        depends on BLOCK_CACHE


@@ -2096,7 +2121,7 @@ config CMD_BEDBUG
        help
          The bedbug (emBEDded deBUGger) command provides debugging features
          for some PowerPC processors. For details please see the
        help
          The bedbug (emBEDded deBUGger) command provides debugging features
          for some PowerPC processors. For details please see the

-         docuemntation in doc/README.beddbug
+         documentation in doc/README.bedbug.

 
 config CMD_DIAG
        bool "diag - Board diagnostics"
 
 config CMD_DIAG
        bool "diag - Board diagnostics"


@@ -2173,6 +2198,14 @@ config CMD_UBI
          It is also strongly encouraged to also enable CONFIG_MTD to get full
          partition support.
 
          It is also strongly encouraged to also enable CONFIG_MTD to get full
          partition support.
 

+config CMD_UBI_RENAME
+       bool "Enable rename"
+       depends on CMD_UBI
+       default n
+       help
+         Enable a "ubi" command to rename ubi volume:
+          ubi rename <oldname> <newname>
+

 config CMD_UBIFS
        tristate "Enable UBIFS - Unsorted block images filesystem commands"
        depends on CMD_UBI
 config CMD_UBIFS
        tristate "Enable UBIFS - Unsorted block images filesystem commands"
        depends on CMD_UBI