projects
/
oweals
/
u-boot.git
/ blobdiff
commit
grep
author
committer
pickaxe
?
search:
re
summary
|
shortlog
|
log
|
commit
|
commitdiff
|
tree
raw
|
inline
| side by side
stm32f746-disco: enable flash support
[oweals/u-boot.git]
/
board
/
isee
/
igep00x0
/
igep00x0.c
diff --git
a/board/isee/igep00x0/igep00x0.c
b/board/isee/igep00x0/igep00x0.c
index 7b87cc27c41b4e517753342202f240e7ff5668b4..d1a6a6f56f0211da5f8424ca95d64783150f661e 100644
(file)
--- a/
board/isee/igep00x0/igep00x0.c
+++ b/
board/isee/igep00x0/igep00x0.c
@@
-5,6
+5,7
@@
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
+#include <status_led.h>
#include <dm.h>
#include <ns16550.h>
#include <twl4030.h>
#include <dm.h>
#include <ns16550.h>
#include <twl4030.h>
@@
-33,13
+34,13
@@
static const u32 gpmc_lan_config[] = {
#endif
static const struct ns16550_platdata igep_serial = {
#endif
static const struct ns16550_platdata igep_serial = {
- OMAP34XX_UART3,
- 2,
- V_NS16550_CLK
+
.base =
OMAP34XX_UART3,
+
.reg_shift =
2,
+
.clock =
V_NS16550_CLK
};
U_BOOT_DEVICE(igep_uart) = {
};
U_BOOT_DEVICE(igep_uart) = {
- "
serial_omap
",
+ "
ns16550_serial
",
&igep_serial
};
&igep_serial
};
@@
-53,21
+54,12
@@
int board_init(void)
/* boot param addr */
gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
/* boot param addr */
gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
- return 0;
-}
-
-#if defined(CONFIG_SHOW_BOOT_PROGRESS) && !defined(CONFIG_SPL_BUILD)
-void show_boot_progress(int val)
-{
- if (val < 0) {
- /* something went wrong */
- return;
- }
+#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT)
+ status_led_set(STATUS_LED_BOOT, STATUS_LED_ON);
+#endif
- if (!gpio_request(IGEP00X0_GPIO_LED, ""))
- gpio_direction_output(IGEP00X0_GPIO_LED, 1);
+ return 0;
}
}
-#endif
#ifdef CONFIG_SPL_BUILD
/*
#ifdef CONFIG_SPL_BUILD
/*
@@
-109,6
+101,19
@@
void get_board_mem_timings(struct board_sdrc_timings *timings)
#endif
#if defined(CONFIG_CMD_NET)
#endif
#if defined(CONFIG_CMD_NET)
+
+static void reset_net_chip(int gpio)
+{
+ if (!gpio_request(gpio, "eth nrst")) {
+ gpio_direction_output(gpio, 1);
+ udelay(1);
+ gpio_set_value(gpio, 0);
+ udelay(40);
+ gpio_set_value(gpio, 1);
+ mdelay(10);
+ }
+}
+
/*
* Routine: setup_net_chip
* Description: Setting up the configuration GPMC registers specific to the
/*
* Routine: setup_net_chip
* Description: Setting up the configuration GPMC registers specific to the
@@
-118,8
+123,8
@@
static void setup_net_chip(void)
{
struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE;
{
struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE;
- enable_gpmc_cs_config(gpmc_lan_config, &gpmc_cfg->cs[5],
0x2C000000,
- GPMC_SIZE_16M);
+ enable_gpmc_cs_config(gpmc_lan_config, &gpmc_cfg->cs[5],
+
CONFIG_SMC911X_BASE,
GPMC_SIZE_16M);
/* Enable off mode for NWE in PADCONF_GPMC_NWE register */
writew(readw(&ctrl_base->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe);
/* Enable off mode for NWE in PADCONF_GPMC_NWE register */
writew(readw(&ctrl_base->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe);
@@
-129,15
+134,7
@@
static void setup_net_chip(void)
writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00,
&ctrl_base->gpmc_nadv_ale);
writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00,
&ctrl_base->gpmc_nadv_ale);
- /* Make GPIO 64 as output pin and send a magic pulse through it */
- if (!gpio_request(64, "")) {
- gpio_direction_output(64, 0);
- gpio_set_value(64, 1);
- udelay(1);
- gpio_set_value(64, 0);
- udelay(1);
- gpio_set_value(64, 1);
- }
+ reset_net_chip(64);
}
#else
static inline void setup_net_chip(void) {}
}
#else
static inline void setup_net_chip(void) {}
@@
-150,14
+147,21
@@
int board_mmc_init(bd_t *bis)
}
#endif
}
#endif
+#if defined(CONFIG_GENERIC_MMC)
+void board_mmc_power_init(void)
+{
+ twl4030_power_mmc_init(0);
+}
+#endif
+
void set_fdt(void)
{
switch (gd->bd->bi_arch_number) {
case MACH_TYPE_IGEP0020:
void set_fdt(void)
{
switch (gd->bd->bi_arch_number) {
case MACH_TYPE_IGEP0020:
- setenv("
dtb
file", "omap3-igep0020.dtb");
+ setenv("
fdt
file", "omap3-igep0020.dtb");
break;
case MACH_TYPE_IGEP0030:
break;
case MACH_TYPE_IGEP0030:
- setenv("
dtb
file", "omap3-igep0030.dtb");
+ setenv("
fdt
file", "omap3-igep0030.dtb");
break;
}
}
break;
}
}
@@
-172,7
+176,7
@@
int misc_init_r(void)
setup_net_chip();
setup_net_chip();
-
dieid_num_r
();
+
omap_die_id_display
();
set_fdt();
set_fdt();
@@
-201,10
+205,10
@@
void set_muxconf_regs(void)
#if defined(CONFIG_CMD_NET)
int board_eth_init(bd_t *bis)
{
#if defined(CONFIG_CMD_NET)
int board_eth_init(bd_t *bis)
{
- int rc = 0;
#ifdef CONFIG_SMC911X
#ifdef CONFIG_SMC911X
- rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
+ return smc911x_initialize(0, CONFIG_SMC911X_BASE);
+#else
+ return 0;
#endif
#endif
- return rc;
}
#endif
}
#endif