drivers: net: keystone_net: drop non dm code

[oweals/u-boot.git] / README

diff --git a/README b/README
index aee0f7371c423c8a48eb0546526be885bd410ac9..a46c7c63a4fed72b16cfbaeb2620e9c1e196b396 100644 (file)
--- a/README
+++ b/README
@@ -528,25 +528,6 @@ The following options need to be configured:
                pointer. This is needed for the temporary stack before
                relocation.
 
                pointer. This is needed for the temporary stack before
                relocation.
 

-               CONFIG_SYS_MIPS_CACHE_MODE
-
-               Cache operation mode for the MIPS CPU.
-               See also arch/mips/include/asm/mipsregs.h.
-               Possible values are:
-                       CONF_CM_CACHABLE_NO_WA
-                       CONF_CM_CACHABLE_WA
-                       CONF_CM_UNCACHED
-                       CONF_CM_CACHABLE_NONCOHERENT
-                       CONF_CM_CACHABLE_CE
-                       CONF_CM_CACHABLE_COW
-                       CONF_CM_CACHABLE_CUW
-                       CONF_CM_CACHABLE_ACCELERATED
-
-               CONFIG_SYS_XWAY_EBU_BOOTCFG
-
-               Special option for Lantiq XWAY SoCs for booting from NOR flash.
-               See also arch/mips/cpu/mips32/start.S.
-

                CONFIG_XWAY_SWAP_BYTES
 
                Enable compilation of tools/xway-swap-bytes needed for Lantiq
                CONFIG_XWAY_SWAP_BYTES
 
                Enable compilation of tools/xway-swap-bytes needed for Lantiq


@@ -977,9 +958,6 @@ The following options need to be configured:
                        Define this to use i/o functions instead of macros
                        (some hardware wont work with macros)
 
                        Define this to use i/o functions instead of macros
                        (some hardware wont work with macros)
 

-               CONFIG_DRIVER_TI_EMAC
-               Support for davinci emac
-

                        CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT
                        Define this if you have more then 3 PHYs.
 
                        CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT
                        Define this if you have more then 3 PHYs.
 


@@ -3018,11 +2996,6 @@ Configuration Settings:
        If defined, don't allow the -f switch to env set override variable
        access flags.
 
        If defined, don't allow the -f switch to env set override variable
        access flags.
 

-- CONFIG_USE_STDINT
-       If stdint.h is available with your toolchain you can define this
-       option to enable it. You can provide option 'USE_STDINT=1' when
-       building U-Boot to enable this.
-

 The following definitions that deal with the placement and management
 of environment data (variable area); in general, we support the
 following configurations:
 The following definitions that deal with the placement and management
 of environment data (variable area); in general, we support the
 following configurations:


@@ -3264,8 +3237,8 @@ Low Level (hardware related) configuration options:
                a 16 bit bus.
                Not all NAND drivers use this symbol.
                Example of drivers that use it:
                a 16 bit bus.
                Not all NAND drivers use this symbol.
                Example of drivers that use it:

-               - drivers/mtd/nand/ndfc.c
-               - drivers/mtd/nand/mxc_nand.c
+               - drivers/mtd/nand/raw/ndfc.c
+               - drivers/mtd/nand/raw/mxc_nand.c

 
 - CONFIG_SYS_NDFC_EBC0_CFG
                Sets the EBC0_CFG register for the NDFC. If not defined
 
 - CONFIG_SYS_NDFC_EBC0_CFG
                Sets the EBC0_CFG register for the NDFC. If not defined


@@ -3382,7 +3355,7 @@ Low Level (hardware related) configuration options:
 - CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
                Option to disable subpage write in NAND driver
                driver that uses this:
 - CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
                Option to disable subpage write in NAND driver
                driver that uses this:

-               drivers/mtd/nand/davinci_nand.c
+               drivers/mtd/nand/raw/davinci_nand.c

 
 Freescale QE/FMAN Firmware Support:
 -----------------------------------
 
 Freescale QE/FMAN Firmware Support:
 -----------------------------------


@@ -3943,6 +3916,17 @@ If CONFIG_REGEX is defined, the variable_name above is evaluated as a
 regular expression. This allows multiple variables to be connected to
 the same callback without explicitly listing them all out.
 
 regular expression. This allows multiple variables to be connected to
 the same callback without explicitly listing them all out.
 

+The signature of the callback functions is:
+
+    int callback(const char *name, const char *value, enum env_op op, int flags)
+
+* name - changed environment variable
+* value - new value of the environment variable
+* op - operation (create, overwrite, or delete)
+* flags - attributes of the environment variable change, see flags H_* in
+  include/search.h
+
+The return value is 0 if the variable change is accepted and 1 otherwise.

 
 Command Line Parsing:
 =====================
 
 Command Line Parsing:
 =====================