-- Monitor Functions:
- Monitor commands can be included or excluded
- from the build by using the #include files
- <config_cmd_all.h> and #undef'ing unwanted
- commands, or adding #define's for wanted commands.
-
- The default command configuration includes all commands
- except those marked below with a "*".
-
- CONFIG_CMD_AES AES 128 CBC encrypt/decrypt
- CONFIG_CMD_ASKENV * ask for env variable
- CONFIG_CMD_BDI bdinfo
- CONFIG_CMD_BOOTD bootd
- CONFIG_CMD_BOOTI * ARM64 Linux kernel Image support
- CONFIG_CMD_CACHE * icache, dcache
- CONFIG_CMD_CONSOLE coninfo
- CONFIG_CMD_DHCP * DHCP support
- CONFIG_CMD_DIAG * Diagnostics
- CONFIG_CMD_ECHO echo arguments
- CONFIG_CMD_EDITENV edit env variable
- CONFIG_CMD_ELF * bootelf, bootvx
- CONFIG_CMD_ENV_EXISTS * check existence of env variable
- CONFIG_CMD_EXPORTENV * export the environment
- CONFIG_CMD_EXT2 * ext2 command support
- CONFIG_CMD_EXT4 * ext4 command support
- CONFIG_CMD_FS_GENERIC * filesystem commands (e.g. load, ls)
- that work for multiple fs types
- CONFIG_CMD_FS_UUID * Look up a filesystem UUID
- CONFIG_CMD_SAVEENV saveenv
- CONFIG_CMD_FLASH flinfo, erase, protect
- CONFIG_CMD_FPGA FPGA device initialization support
- CONFIG_CMD_GO * the 'go' command (exec code)
- CONFIG_CMD_GREPENV * search environment
- CONFIG_CMD_I2C * I2C serial bus support
- CONFIG_CMD_IMI iminfo
- CONFIG_CMD_IMLS List all images found in NOR flash
- CONFIG_CMD_IMLS_NAND * List all images found in NAND flash
- CONFIG_CMD_IMPORTENV * import an environment
- CONFIG_CMD_INI * import data from an ini file into the env
- CONFIG_CMD_ITEST Integer/string test of 2 values
- CONFIG_CMD_LDRINFO * ldrinfo (display Blackfin loader)
- CONFIG_CMD_LINK_LOCAL * link-local IP address auto-configuration
- (169.254.*.*)
- CONFIG_CMD_LOADB loadb
- CONFIG_CMD_LOADS loads
- CONFIG_CMD_MD5SUM * print md5 message digest
- (requires CONFIG_CMD_MEMORY and CONFIG_MD5)
- CONFIG_CMD_MEMINFO * Display detailed memory information
- CONFIG_CMD_MEMORY md, mm, nm, mw, cp, cmp, crc, base,
- loop, loopw
- CONFIG_CMD_MEMTEST * mtest
- CONFIG_CMD_MISC Misc functions like sleep etc
- CONFIG_CMD_MMC * MMC memory mapped support
- CONFIG_CMD_MII * MII utility commands
- CONFIG_CMD_NET bootp, tftpboot, rarpboot
- CONFIG_CMD_NFS NFS support
- CONFIG_CMD_PING * send ICMP ECHO_REQUEST to network
- host
- CONFIG_CMD_RUN run command in env variable
- CONFIG_CMD_SDRAM * print SDRAM configuration information
- (requires CONFIG_CMD_I2C)
- CONFIG_CMD_SF * Read/write/erase SPI NOR flash
- CONFIG_CMD_SOFTSWITCH * Soft switch setting command for BF60x
- CONFIG_CMD_SOURCE "source" command Support
- CONFIG_CMD_SPI * SPI serial bus support
- CONFIG_CMD_TFTPSRV * TFTP transfer in server mode
- CONFIG_CMD_TFTPPUT * TFTP put command (upload)
- CONFIG_CMD_TIME * run command and report execution time (ARM specific)
- CONFIG_CMD_TIMER * access to the system tick timer
- CONFIG_CMD_USB * USB support
- CONFIG_CMD_CDP * Cisco Discover Protocol support
- CONFIG_CMD_XIMG Load part of Multi Image
- CONFIG_CMD_UUID * Generate random UUID or GUID string
-
- EXAMPLE: If you want all functions except of network
- support you can write:
-
- #include "config_cmd_all.h"
- #undef CONFIG_CMD_NET
-
- Other Commands:
- fdt (flattened device tree) command: CONFIG_OF_LIBFDT
-
- Note: Don't enable the "icache" and "dcache" commands
- (configuration option CONFIG_CMD_CACHE) unless you know
- what you (and your U-Boot users) are doing. Data
- cache cannot be enabled on systems like the
- 8xx (where accesses to the IMMR region must be
- uncached), and it cannot be disabled on all other
- systems where we (mis-) use the data cache to hold an
- initial stack and some data.
-
-
- XXX - this list needs to get updated!
-
projects / oweals / u-boot.git / blobdiff