+ *) Add EC_KEY_get0_engine(), which does for EC_KEY what RSA_get0_engine()
+ does for RSA, etc.
+ [Richard Levitte]
+
+ *) Have 'config' recognise 64-bit mingw and choose 'mingw64' as the target
+ platform rather than 'mingw'.
+ [Richard Levitte]
+
+ *) x86_64 assembly pack: annotate code with DWARF CFI directives to
+ facilitate stack unwinding even from assembly subroutines.
+ [Andy Polyakov]
+
+ *) Remove VAX C specific definitions of OPENSSL_EXPORT, OPENSSL_EXTERN.
+ Also remove OPENSSL_GLOBAL entirely, as it became a no-op.
+ [Richard Levitte]
+
+ *) Remove the VMS-specific reimplementation of gmtime from crypto/o_times.c.
+ VMS C's RTL has a fully up to date gmtime() and gmtime_r() since V7.1,
+ which is the minimum version we support.
+ [Richard Levitte]
+
+ *) Certificate time validation (X509_cmp_time) enforces stricter
+ compliance with RFC 5280. Fractional seconds and timezone offsets
+ are no longer allowed.
+ [Emilia Käsper]
+
+ *) Add support for ARIA
+ [Paul Dale]
+
+ *) Add support for SipHash
+ [Todd Short]
+
+ *) OpenSSL now fails if it receives an unrecognised record type in TLS1.0
+ or TLS1.1. Previously this only happened in SSLv3 and TLS1.2. This is to
+ prevent issues where no progress is being made and the peer continually
+ sends unrecognised record types, using up resources processing them.
+ [Matt Caswell]
+
+ *) 'openssl passwd' can now produce SHA256 and SHA512 based output,
+ using the algorithm defined in
+ https://www.akkadia.org/drepper/SHA-crypt.txt
+ [Richard Levitte]
+
+ *) Heartbeat support has been removed; the ABI is changed for now.
+ [Richard Levitte, Rich Salz]
+
+ *) Support for SSL_OP_NO_ENCRYPT_THEN_MAC in SSL_CONF_cmd.
+ [Emilia Käsper]
+
+ Changes between 1.1.0d and 1.1.0e [16 Feb 2017]
+
+ *) Encrypt-Then-Mac renegotiation crash
+
+ During a renegotiation handshake if the Encrypt-Then-Mac extension is
+ negotiated where it was not in the original handshake (or vice-versa) then
+ this can cause OpenSSL to crash (dependant on ciphersuite). Both clients
+ and servers are affected.
+
+ This issue was reported to OpenSSL by Joe Orton (Red Hat).
+ (CVE-2017-3733)
+ [Matt Caswell]
+
+ Changes between 1.1.0c and 1.1.0d [26 Jan 2017]
+
+ *) Truncated packet could crash via OOB read
+
+ If one side of an SSL/TLS path is running on a 32-bit host and a specific
+ cipher is being used, then a truncated packet can cause that host to
+ perform an out-of-bounds read, usually resulting in a crash.
+
+ This issue was reported to OpenSSL by Robert Święcki of Google.
+ (CVE-2017-3731)
+ [Andy Polyakov]
+
+ *) Bad (EC)DHE parameters cause a client crash
+
+ If a malicious server supplies bad parameters for a DHE or ECDHE key
+ exchange then this can result in the client attempting to dereference a
+ NULL pointer leading to a client crash. This could be exploited in a Denial
+ of Service attack.
+
+ This issue was reported to OpenSSL by Guido Vranken.
+ (CVE-2017-3730)
+ [Matt Caswell]
+
+ *) BN_mod_exp may produce incorrect results on x86_64
+
+ There is a carry propagating bug in the x86_64 Montgomery squaring
+ procedure. No EC algorithms are affected. Analysis suggests that attacks
+ against RSA and DSA as a result of this defect would be very difficult to
+ perform and are not believed likely. Attacks against DH are considered just
+ feasible (although very difficult) because most of the work necessary to
+ deduce information about a private key may be performed offline. The amount
+ of resources required for such an attack would be very significant and
+ likely only accessible to a limited number of attackers. An attacker would
+ additionally need online access to an unpatched system using the target
+ private key in a scenario with persistent DH parameters and a private
+ key that is shared between multiple clients. For example this can occur by
+ default in OpenSSL DHE based SSL/TLS ciphersuites. Note: This issue is very
+ similar to CVE-2015-3193 but must be treated as a separate problem.
+
+ This issue was reported to OpenSSL by the OSS-Fuzz project.
+ (CVE-2017-3732)
+ [Andy Polyakov]
+
+ Changes between 1.1.0b and 1.1.0c [10 Nov 2016]
+
+ *) ChaCha20/Poly1305 heap-buffer-overflow
+
+ TLS connections using *-CHACHA20-POLY1305 ciphersuites are susceptible to
+ a DoS attack by corrupting larger payloads. This can result in an OpenSSL
+ crash. This issue is not considered to be exploitable beyond a DoS.
+
+ This issue was reported to OpenSSL by Robert Święcki (Google Security Team)
+ (CVE-2016-7054)
+ [Richard Levitte]
+
+ *) CMS Null dereference
+
+ Applications parsing invalid CMS structures can crash with a NULL pointer
+ dereference. This is caused by a bug in the handling of the ASN.1 CHOICE
+ type in OpenSSL 1.1.0 which can result in a NULL value being passed to the
+ structure callback if an attempt is made to free certain invalid encodings.
+ Only CHOICE structures using a callback which do not handle NULL value are
+ affected.
+
+ This issue was reported to OpenSSL by Tyler Nighswander of ForAllSecure.
+ (CVE-2016-7053)
+ [Stephen Henson]
+
+ *) Montgomery multiplication may produce incorrect results
+
+ There is a carry propagating bug in the Broadwell-specific Montgomery
+ multiplication procedure that handles input lengths divisible by, but
+ longer than 256 bits. Analysis suggests that attacks against RSA, DSA
+ and DH private keys are impossible. This is because the subroutine in
+ question is not used in operations with the private key itself and an input
+ of the attacker's direct choice. Otherwise the bug can manifest itself as
+ transient authentication and key negotiation failures or reproducible
+ erroneous outcome of public-key operations with specially crafted input.
+ Among EC algorithms only Brainpool P-512 curves are affected and one
+ presumably can attack ECDH key negotiation. Impact was not analyzed in
+ detail, because pre-requisites for attack are considered unlikely. Namely
+ multiple clients have to choose the curve in question and the server has to
+ share the private key among them, neither of which is default behaviour.
+ Even then only clients that chose the curve will be affected.
+
+ This issue was publicly reported as transient failures and was not
+ initially recognized as a security issue. Thanks to Richard Morgan for
+ providing reproducible case.
+ (CVE-2016-7055)
+ [Andy Polyakov]
+
+ *) Removed automatic addition of RPATH in shared libraries and executables,
+ as this was a remainder from OpenSSL 1.0.x and isn't needed any more.
+ [Richard Levitte]
+
+ Changes between 1.1.0a and 1.1.0b [26 Sep 2016]
+
+ *) Fix Use After Free for large message sizes
+
+ The patch applied to address CVE-2016-6307 resulted in an issue where if a
+ message larger than approx 16k is received then the underlying buffer to
+ store the incoming message is reallocated and moved. Unfortunately a
+ dangling pointer to the old location is left which results in an attempt to
+ write to the previously freed location. This is likely to result in a
+ crash, however it could potentially lead to execution of arbitrary code.
+
+ This issue only affects OpenSSL 1.1.0a.
+
+ This issue was reported to OpenSSL by Robert Święcki.
+ (CVE-2016-6309)
+ [Matt Caswell]
+
+ Changes between 1.1.0 and 1.1.0a [22 Sep 2016]
+
+ *) OCSP Status Request extension unbounded memory growth
+
+ A malicious client can send an excessively large OCSP Status Request
+ extension. If that client continually requests renegotiation, sending a
+ large OCSP Status Request extension each time, then there will be unbounded
+ memory growth on the server. This will eventually lead to a Denial Of
+ Service attack through memory exhaustion. Servers with a default
+ configuration are vulnerable even if they do not support OCSP. Builds using
+ the "no-ocsp" build time option are not affected.
+
+ This issue was reported to OpenSSL by Shi Lei (Gear Team, Qihoo 360 Inc.)
+ (CVE-2016-6304)
+ [Matt Caswell]
+
+ *) SSL_peek() hang on empty record
+
+ OpenSSL 1.1.0 SSL/TLS will hang during a call to SSL_peek() if the peer
+ sends an empty record. This could be exploited by a malicious peer in a
+ Denial Of Service attack.
+
+ This issue was reported to OpenSSL by Alex Gaynor.
+ (CVE-2016-6305)
+ [Matt Caswell]
+
+ *) Excessive allocation of memory in tls_get_message_header() and
+ dtls1_preprocess_fragment()
+
+ A (D)TLS message includes 3 bytes for its length in the header for the
+ message. This would allow for messages up to 16Mb in length. Messages of
+ this length are excessive and OpenSSL includes a check to ensure that a
+ peer is sending reasonably sized messages in order to avoid too much memory
+ being consumed to service a connection. A flaw in the logic of version
+ 1.1.0 means that memory for the message is allocated too early, prior to
+ the excessive message length check. Due to way memory is allocated in
+ OpenSSL this could mean an attacker could force up to 21Mb to be allocated
+ to service a connection. This could lead to a Denial of Service through
+ memory exhaustion. However, the excessive message length check still takes
+ place, and this would cause the connection to immediately fail. Assuming
+ that the application calls SSL_free() on the failed conneciton in a timely
+ manner then the 21Mb of allocated memory will then be immediately freed
+ again. Therefore the excessive memory allocation will be transitory in
+ nature. This then means that there is only a security impact if:
+
+ 1) The application does not call SSL_free() in a timely manner in the event
+ that the connection fails
+ or
+ 2) The application is working in a constrained environment where there is
+ very little free memory
+ or
+ 3) The attacker initiates multiple connection attempts such that there are
+ multiple connections in a state where memory has been allocated for the
+ connection; SSL_free() has not yet been called; and there is insufficient
+ memory to service the multiple requests.
+
+ Except in the instance of (1) above any Denial Of Service is likely to be
+ transitory because as soon as the connection fails the memory is
+ subsequently freed again in the SSL_free() call. However there is an
+ increased risk during this period of application crashes due to the lack of
+ memory - which would then mean a more serious Denial of Service.
+
+ This issue was reported to OpenSSL by Shi Lei (Gear Team, Qihoo 360 Inc.)
+ (CVE-2016-6307 and CVE-2016-6308)
+ [Matt Caswell]
+
+ *) solaris-x86-cc, i.e. 32-bit configuration with vendor compiler,
+ had to be removed. Primary reason is that vendor assembler can't
+ assemble our modules with -KPIC flag. As result it, assembly
+ support, was not even available as option. But its lack means
+ lack of side-channel resistant code, which is incompatible with
+ security by todays standards. Fortunately gcc is readily available
+ prepackaged option, which we firmly point at...
+ [Andy Polyakov]
+
+ Changes between 1.0.2h and 1.1.0 [25 Aug 2016]
+
+ *) Windows command-line tool supports UTF-8 opt-in option for arguments
+ and console input. Setting OPENSSL_WIN32_UTF8 environment variable
+ (to any value) allows Windows user to access PKCS#12 file generated
+ with Windows CryptoAPI and protected with non-ASCII password, as well
+ as files generated under UTF-8 locale on Linux also protected with
+ non-ASCII password.
+ [Andy Polyakov]
+
+ *) To mitigate the SWEET32 attack (CVE-2016-2183), 3DES cipher suites
+ have been disabled by default and removed from DEFAULT, just like RC4.
+ See the RC4 item below to re-enable both.
+ [Rich Salz]
+
+ *) The method for finding the storage location for the Windows RAND seed file
+ has changed. First we check %RANDFILE%. If that is not set then we check
+ the directories %HOME%, %USERPROFILE% and %SYSTEMROOT% in that order. If
+ all else fails we fall back to C:\.
+ [Matt Caswell]
+
+ *) The EVP_EncryptUpdate() function has had its return type changed from void
+ to int. A return of 0 indicates and error while a return of 1 indicates
+ success.
+ [Matt Caswell]
+
+ *) The flags RSA_FLAG_NO_CONSTTIME, DSA_FLAG_NO_EXP_CONSTTIME and
+ DH_FLAG_NO_EXP_CONSTTIME which previously provided the ability to switch
+ off the constant time implementation for RSA, DSA and DH have been made
+ no-ops and deprecated.
+ [Matt Caswell]
+
+ *) Windows RAND implementation was simplified to only get entropy by
+ calling CryptGenRandom(). Various other RAND-related tickets
+ were also closed.
+ [Joseph Wylie Yandle, Rich Salz]
+
+ *) The stack and lhash API's were renamed to start with OPENSSL_SK_
+ and OPENSSL_LH_, respectively. The old names are available
+ with API compatibility. They new names are now completely documented.
+ [Rich Salz]
+
+ *) Unify TYPE_up_ref(obj) methods signature.
+ SSL_CTX_up_ref(), SSL_up_ref(), X509_up_ref(), EVP_PKEY_up_ref(),
+ X509_CRL_up_ref(), X509_OBJECT_up_ref_count() methods are now returning an
+ int (instead of void) like all others TYPE_up_ref() methods.
+ So now these methods also check the return value of CRYPTO_atomic_add(),
+ and the validity of object reference counter.
+ [fdasilvayy@gmail.com]
+
+ *) With Windows Visual Studio builds, the .pdb files are installed
+ alongside the installed libraries and executables. For a static
+ library installation, ossl_static.pdb is the associate compiler
+ generated .pdb file to be used when linking programs.
+ [Richard Levitte]
+
+ *) Remove openssl.spec. Packaging files belong with the packagers.
+ [Richard Levitte]
+
+ *) Automatic Darwin/OSX configuration has had a refresh, it will now
+ recognise x86_64 architectures automatically. You can still decide
+ to build for a different bitness with the environment variable
+ KERNEL_BITS (can be 32 or 64), for example:
+
+ KERNEL_BITS=32 ./config
+
+ [Richard Levitte]
+
+ *) Change default algorithms in pkcs8 utility to use PKCS#5 v2.0,
+ 256 bit AES and HMAC with SHA256.
+ [Steve Henson]
+
+ *) Remove support for MIPS o32 ABI on IRIX (and IRIX only).
+ [Andy Polyakov]
+
+ *) Triple-DES ciphers have been moved from HIGH to MEDIUM.
+ [Rich Salz]
+
+ *) To enable users to have their own config files and build file templates,
+ Configure looks in the directory indicated by the environment variable
+ OPENSSL_LOCAL_CONFIG_DIR as well as the in-source Configurations/
+ directory. On VMS, OPENSSL_LOCAL_CONFIG_DIR is expected to be a logical
+ name and is used as is.
+ [Richard Levitte]
+
+ *) The following datatypes were made opaque: X509_OBJECT, X509_STORE_CTX,
+ X509_STORE, X509_LOOKUP, and X509_LOOKUP_METHOD. The unused type
+ X509_CERT_FILE_CTX was removed.
+ [Rich Salz]
+
+ *) "shared" builds are now the default. To create only static libraries use
+ the "no-shared" Configure option.
+ [Matt Caswell]
+
+ *) Remove the no-aes, no-hmac, no-rsa, no-sha and no-md5 Configure options.
+ All of these option have not worked for some while and are fundamental
+ algorithms.
+ [Matt Caswell]
+
+ *) Make various cleanup routines no-ops and mark them as deprecated. Most
+ global cleanup functions are no longer required because they are handled
+ via auto-deinit (see OPENSSL_init_crypto and OPENSSL_init_ssl man pages).
+ Explicitly de-initing can cause problems (e.g. where a library that uses
+ OpenSSL de-inits, but an application is still using it). The affected
+ functions are CONF_modules_free(), ENGINE_cleanup(), OBJ_cleanup(),
+ EVP_cleanup(), BIO_sock_cleanup(), CRYPTO_cleanup_all_ex_data(),
+ RAND_cleanup(), SSL_COMP_free_compression_methods(), ERR_free_strings() and
+ COMP_zlib_cleanup().
+ [Matt Caswell]
+
+ *) --strict-warnings no longer enables runtime debugging options
+ such as REF_DEBUG. Instead, debug options are automatically
+ enabled with '--debug' builds.
+ [Andy Polyakov, Emilia Käsper]
+
+ *) Made DH and DH_METHOD opaque. The structures for managing DH objects
+ have been moved out of the public header files. New functions for managing
+ these have been added.
+ [Matt Caswell]
+
+ *) Made RSA and RSA_METHOD opaque. The structures for managing RSA
+ objects have been moved out of the public header files. New
+ functions for managing these have been added.
+ [Richard Levitte]
+
+ *) Made DSA and DSA_METHOD opaque. The structures for managing DSA objects
+ have been moved out of the public header files. New functions for managing
+ these have been added.
+ [Matt Caswell]
+
+ *) Made BIO and BIO_METHOD opaque. The structures for managing BIOs have been
+ moved out of the public header files. New functions for managing these
+ have been added.
+ [Matt Caswell]
+
+ *) Removed no-rijndael as a config option. Rijndael is an old name for AES.
+ [Matt Caswell]
+
+ *) Removed the mk1mf build scripts.
+ [Richard Levitte]
+
+ *) Headers are now wrapped, if necessary, with OPENSSL_NO_xxx, so
+ it is always safe to #include a header now.
+ [Rich Salz]
+
+ *) Removed the aged BC-32 config and all its supporting scripts
+ [Richard Levitte]
+
+ *) Removed support for Ultrix, Netware, and OS/2.
+ [Rich Salz]
+
+ *) Add support for HKDF.
+ [Alessandro Ghedini]
+
+ *) Add support for blake2b and blake2s
+ [Bill Cox]
+
+ *) Added support for "pipelining". Ciphers that have the
+ EVP_CIPH_FLAG_PIPELINE flag set have a capability to process multiple
+ encryptions/decryptions simultaneously. There are currently no built-in
+ ciphers with this property but the expectation is that engines will be able
+ to offer it to significantly improve throughput. Support has been extended
+ into libssl so that multiple records for a single connection can be
+ processed in one go (for >=TLS 1.1).
+ [Matt Caswell]
+
+ *) Added the AFALG engine. This is an async capable engine which is able to
+ offload work to the Linux kernel. In this initial version it only supports
+ AES128-CBC. The kernel must be version 4.1.0 or greater.
+ [Catriona Lucey]
+
+ *) OpenSSL now uses a new threading API. It is no longer necessary to
+ set locking callbacks to use OpenSSL in a multi-threaded environment. There
+ are two supported threading models: pthreads and windows threads. It is
+ also possible to configure OpenSSL at compile time for "no-threads". The
+ old threading API should no longer be used. The functions have been
+ replaced with "no-op" compatibility macros.
+ [Alessandro Ghedini, Matt Caswell]
+
+ *) Modify behavior of ALPN to invoke callback after SNI/servername
+ callback, such that updates to the SSL_CTX affect ALPN.
+ [Todd Short]
+
+ *) Add SSL_CIPHER queries for authentication and key-exchange.
+ [Todd Short]
+
+ *) Changes to the DEFAULT cipherlist:
+ - Prefer (EC)DHE handshakes over plain RSA.
+ - Prefer AEAD ciphers over legacy ciphers.
+ - Prefer ECDSA over RSA when both certificates are available.
+ - Prefer TLSv1.2 ciphers/PRF.
+ - Remove DSS, SEED, IDEA, CAMELLIA, and AES-CCM from the
+ default cipherlist.
+ [Emilia Käsper]
+
+ *) Change the ECC default curve list to be this, in order: x25519,
+ secp256r1, secp521r1, secp384r1.
+ [Rich Salz]
+
+ *) RC4 based libssl ciphersuites are now classed as "weak" ciphers and are
+ disabled by default. They can be re-enabled using the
+ enable-weak-ssl-ciphers option to Configure.
+ [Matt Caswell]
+
+ *) If the server has ALPN configured, but supports no protocols that the
+ client advertises, send a fatal "no_application_protocol" alert.
+ This behaviour is SHALL in RFC 7301, though it isn't universally
+ implemented by other servers.
+ [Emilia Käsper]
+
+ *) Add X25519 support.
+ Add ASN.1 and EVP_PKEY methods for X25519. This includes support
+ for public and private key encoding using the format documented in
+ draft-ietf-curdle-pkix-02. The coresponding EVP_PKEY method supports
+ key generation and key derivation.
+
+ TLS support complies with draft-ietf-tls-rfc4492bis-08 and uses
+ X25519(29).
+ [Steve Henson]
+
+ *) Deprecate SRP_VBASE_get_by_user.
+ SRP_VBASE_get_by_user had inconsistent memory management behaviour.
+ In order to fix an unavoidable memory leak (CVE-2016-0798),
+ SRP_VBASE_get_by_user was changed to ignore the "fake user" SRP
+ seed, even if the seed is configured.
+
+ Users should use SRP_VBASE_get1_by_user instead. Note that in
+ SRP_VBASE_get1_by_user, caller must free the returned value. Note
+ also that even though configuring the SRP seed attempts to hide
+ invalid usernames by continuing the handshake with fake
+ credentials, this behaviour is not constant time and no strong
+ guarantees are made that the handshake is indistinguishable from
+ that of a valid user.
+ [Emilia Käsper]
+
+ *) Configuration change; it's now possible to build dynamic engines
+ without having to build shared libraries and vice versa. This
+ only applies to the engines in engines/, those in crypto/engine/
+ will always be built into libcrypto (i.e. "static").
+
+ Building dynamic engines is enabled by default; to disable, use
+ the configuration option "disable-dynamic-engine".
+
+ The only requirements for building dynamic engines are the
+ presence of the DSO module and building with position independent
+ code, so they will also automatically be disabled if configuring
+ with "disable-dso" or "disable-pic".
+
+ The macros OPENSSL_NO_STATIC_ENGINE and OPENSSL_NO_DYNAMIC_ENGINE
+ are also taken away from openssl/opensslconf.h, as they are
+ irrelevant.
+ [Richard Levitte]
+
+ *) Configuration change; if there is a known flag to compile
+ position independent code, it will always be applied on the
+ libcrypto and libssl object files, and never on the application
+ object files. This means other libraries that use routines from
+ libcrypto / libssl can be made into shared libraries regardless
+ of how OpenSSL was configured.
+
+ If this isn't desirable, the configuration options "disable-pic"
+ or "no-pic" can be used to disable the use of PIC. This will
+ also disable building shared libraries and dynamic engines.
+ [Richard Levitte]
+
+ *) Removed JPAKE code. It was experimental and has no wide use.
+ [Rich Salz]
+
+ *) The INSTALL_PREFIX Makefile variable has been renamed to
+ DESTDIR. That makes for less confusion on what this variable
+ is for. Also, the configuration option --install_prefix is
+ removed.
+ [Richard Levitte]
+
+ *) Heartbeat for TLS has been removed and is disabled by default
+ for DTLS; configure with enable-heartbeats. Code that uses the
+ old #define's might need to be updated.
+ [Emilia Käsper, Rich Salz]
+
+ *) Rename REF_CHECK to REF_DEBUG.
+ [Rich Salz]
+
+ *) New "unified" build system
+
+ The "unified" build system is aimed to be a common system for all
+ platforms we support. With it comes new support for VMS.
+
+ This system builds supports building in a different directory tree
+ than the source tree. It produces one Makefile (for unix family
+ or lookalikes), or one descrip.mms (for VMS).
+
+ The source of information to make the Makefile / descrip.mms is
+ small files called 'build.info', holding the necessary
+ information for each directory with source to compile, and a
+ template in Configurations, like unix-Makefile.tmpl or
+ descrip.mms.tmpl.
+
+ With this change, the library names were also renamed on Windows
+ and on VMS. They now have names that are closer to the standard
+ on Unix, and include the major version number, and in certain
+ cases, the architecture they are built for. See "Notes on shared
+ libraries" in INSTALL.
+
+ We rely heavily on the perl module Text::Template.
+ [Richard Levitte]
+
+ *) Added support for auto-initialisation and de-initialisation of the library.
+ OpenSSL no longer requires explicit init or deinit routines to be called,
+ except in certain circumstances. See the OPENSSL_init_crypto() and
+ OPENSSL_init_ssl() man pages for further information.
+ [Matt Caswell]
+
+ *) The arguments to the DTLSv1_listen function have changed. Specifically the
+ "peer" argument is now expected to be a BIO_ADDR object.
+
+ *) Rewrite of BIO networking library. The BIO library lacked consistent
+ support of IPv6, and adding it required some more extensive
+ modifications. This introduces the BIO_ADDR and BIO_ADDRINFO types,
+ which hold all types of addresses and chains of address information.
+ It also introduces a new API, with functions like BIO_socket,
+ BIO_connect, BIO_listen, BIO_lookup and a rewrite of BIO_accept.
+ The source/sink BIOs BIO_s_connect, BIO_s_accept and BIO_s_datagram
+ have been adapted accordingly.
+ [Richard Levitte]
+
+ *) RSA_padding_check_PKCS1_type_1 now accepts inputs with and without
+ the leading 0-byte.
+ [Emilia Käsper]
+
+ *) CRIME protection: disable compression by default, even if OpenSSL is
+ compiled with zlib enabled. Applications can still enable compression
+ by calling SSL_CTX_clear_options(ctx, SSL_OP_NO_COMPRESSION), or by
+ using the SSL_CONF library to configure compression.
+ [Emilia Käsper]
+
+ *) The signature of the session callback configured with
+ SSL_CTX_sess_set_get_cb was changed. The read-only input buffer
+ was explicitly marked as 'const unsigned char*' instead of
+ 'unsigned char*'.
+ [Emilia Käsper]
+
+ *) Always DPURIFY. Remove the use of uninitialized memory in the
+ RNG, and other conditional uses of DPURIFY. This makes -DPURIFY a no-op.
+ [Emilia Käsper]
+
+ *) Removed many obsolete configuration items, including
+ DES_PTR, DES_RISC1, DES_RISC2, DES_INT
+ MD2_CHAR, MD2_INT, MD2_LONG
+ BF_PTR, BF_PTR2
+ IDEA_SHORT, IDEA_LONG
+ RC2_SHORT, RC2_LONG, RC4_LONG, RC4_CHUNK, RC4_INDEX
+ [Rich Salz, with advice from Andy Polyakov]
+
+ *) Many BN internals have been moved to an internal header file.
+ [Rich Salz with help from Andy Polyakov]
+
+ *) Configuration and writing out the results from it has changed.
+ Files such as Makefile include/openssl/opensslconf.h and are now
+ produced through general templates, such as Makefile.in and
+ crypto/opensslconf.h.in and some help from the perl module
+ Text::Template.
+
+ Also, the center of configuration information is no longer
+ Makefile. Instead, Configure produces a perl module in
+ configdata.pm which holds most of the config data (in the hash
+ table %config), the target data that comes from the target
+ configuration in one of the Configurations/*.conf files (in
+ %target).
+ [Richard Levitte]
+
+ *) To clarify their intended purposes, the Configure options
+ --prefix and --openssldir change their semantics, and become more
+ straightforward and less interdependent.
+
+ --prefix shall be used exclusively to give the location INSTALLTOP
+ where programs, scripts, libraries, include files and manuals are
+ going to be installed. The default is now /usr/local.
+
+ --openssldir shall be used exclusively to give the default
+ location OPENSSLDIR where certificates, private keys, CRLs are
+ managed. This is also where the default openssl.cnf gets
+ installed.
+ If the directory given with this option is a relative path, the
+ values of both the --prefix value and the --openssldir value will
+ be combined to become OPENSSLDIR.
+ The default for --openssldir is INSTALLTOP/ssl.
+
+ Anyone who uses --openssldir to specify where OpenSSL is to be
+ installed MUST change to use --prefix instead.
+ [Richard Levitte]
+
+ *) The GOST engine was out of date and therefore it has been removed. An up
+ to date GOST engine is now being maintained in an external repository.
+ See: https://wiki.openssl.org/index.php/Binaries. Libssl still retains
+ support for GOST ciphersuites (these are only activated if a GOST engine
+ is present).
+ [Matt Caswell]
+
+ *) EGD is no longer supported by default; use enable-egd when
+ configuring.
+ [Ben Kaduk and Rich Salz]
+
+ *) The distribution now has Makefile.in files, which are used to
+ create Makefile's when Configure is run. *Configure must be run
+ before trying to build now.*
+ [Rich Salz]
+
+ *) The return value for SSL_CIPHER_description() for error conditions
+ has changed.
+ [Rich Salz]
+
+ *) Support for RFC6698/RFC7671 DANE TLSA peer authentication.
+
+ Obtaining and performing DNSSEC validation of TLSA records is
+ the application's responsibility. The application provides
+ the TLSA records of its choice to OpenSSL, and these are then
+ used to authenticate the peer.
+
+ The TLSA records need not even come from DNS. They can, for
+ example, be used to implement local end-entity certificate or
+ trust-anchor "pinning", where the "pin" data takes the form
+ of TLSA records, which can augment or replace verification
+ based on the usual WebPKI public certification authorities.
+ [Viktor Dukhovni]
+
+ *) Revert default OPENSSL_NO_DEPRECATED setting. Instead OpenSSL
+ continues to support deprecated interfaces in default builds.
+ However, applications are strongly advised to compile their
+ source files with -DOPENSSL_API_COMPAT=0x10100000L, which hides
+ the declarations of all interfaces deprecated in 0.9.8, 1.0.0
+ or the 1.1.0 releases.
+
+ In environments in which all applications have been ported to
+ not use any deprecated interfaces OpenSSL's Configure script
+ should be used with the --api=1.1.0 option to entirely remove
+ support for the deprecated features from the library and
+ unconditionally disable them in the installed headers.
+ Essentially the same effect can be achieved with the "no-deprecated"
+ argument to Configure, except that this will always restrict
+ the build to just the latest API, rather than a fixed API
+ version.
+
+ As applications are ported to future revisions of the API,
+ they should update their compile-time OPENSSL_API_COMPAT define
+ accordingly, but in most cases should be able to continue to
+ compile with later releases.
+
+ The OPENSSL_API_COMPAT versions for 1.0.0, and 0.9.8 are
+ 0x10000000L and 0x00908000L, respectively. However those
+ versions did not support the OPENSSL_API_COMPAT feature, and
+ so applications are not typically tested for explicit support
+ of just the undeprecated features of either release.
+ [Viktor Dukhovni]
+
+ *) Add support for setting the minimum and maximum supported protocol.
+ It can bet set via the SSL_set_min_proto_version() and
+ SSL_set_max_proto_version(), or via the SSL_CONF's MinProtocol and
+ MaxProtcol. It's recommended to use the new APIs to disable
+ protocols instead of disabling individual protocols using
+ SSL_set_options() or SSL_CONF's Protocol. This change also
+ removes support for disabling TLS 1.2 in the OpenSSL TLS
+ client at compile time by defining OPENSSL_NO_TLS1_2_CLIENT.
+ [Kurt Roeckx]
+
+ *) Support for ChaCha20 and Poly1305 added to libcrypto and libssl.
+ [Andy Polyakov]
+
+ *) New EC_KEY_METHOD, this replaces the older ECDSA_METHOD and ECDH_METHOD
+ and integrates ECDSA and ECDH functionality into EC. Implementations can
+ now redirect key generation and no longer need to convert to or from
+ ECDSA_SIG format.
+
+ Note: the ecdsa.h and ecdh.h headers are now no longer needed and just
+ include the ec.h header file instead.
+ [Steve Henson]
+
+ *) Remove support for all 40 and 56 bit ciphers. This includes all the export
+ ciphers who are no longer supported and drops support the ephemeral RSA key
+ exchange. The LOW ciphers currently doesn't have any ciphers in it.
+ [Kurt Roeckx]
+
+ *) Made EVP_MD_CTX, EVP_MD, EVP_CIPHER_CTX, EVP_CIPHER and HMAC_CTX
+ opaque. For HMAC_CTX, the following constructors and destructors
+ were added:
+
+ HMAC_CTX *HMAC_CTX_new(void);
+ void HMAC_CTX_free(HMAC_CTX *ctx);
+
+ For EVP_MD and EVP_CIPHER, complete APIs to create, fill and
+ destroy such methods has been added. See EVP_MD_meth_new(3) and
+ EVP_CIPHER_meth_new(3) for documentation.
+
+ Additional changes:
+ 1) EVP_MD_CTX_cleanup(), EVP_CIPHER_CTX_cleanup() and
+ HMAC_CTX_cleanup() were removed. HMAC_CTX_reset() and
+ EVP_MD_CTX_reset() should be called instead to reinitialise
+ an already created structure.
+ 2) For consistency with the majority of our object creators and
+ destructors, EVP_MD_CTX_(create|destroy) were renamed to
+ EVP_MD_CTX_(new|free). The old names are retained as macros
+ for deprecated builds.
+ [Richard Levitte]
+
+ *) Added ASYNC support. Libcrypto now includes the async sub-library to enable
+ cryptographic operations to be performed asynchronously as long as an
+ asynchronous capable engine is used. See the ASYNC_start_job() man page for
+ further details. Libssl has also had this capability integrated with the
+ introduction of the new mode SSL_MODE_ASYNC and associated error
+ SSL_ERROR_WANT_ASYNC. See the SSL_CTX_set_mode() and SSL_get_error() man
+ pages. This work was developed in partnership with Intel Corp.
+ [Matt Caswell]
+
+ *) SSL_{CTX_}set_ecdh_auto() has been removed and ECDH is support is
+ always enabled now. If you want to disable the support you should
+ exclude it using the list of supported ciphers. This also means that the
+ "-no_ecdhe" option has been removed from s_server.
+ [Kurt Roeckx]
+
+ *) SSL_{CTX}_set_tmp_ecdh() which can set 1 EC curve now internally calls
+ SSL_{CTX_}set1_curves() which can set a list.
+ [Kurt Roeckx]
+
+ *) Remove support for SSL_{CTX_}set_tmp_ecdh_callback(). You should set the
+ curve you want to support using SSL_{CTX_}set1_curves().
+ [Kurt Roeckx]
+
+ *) State machine rewrite. The state machine code has been significantly
+ refactored in order to remove much duplication of code and solve issues
+ with the old code (see ssl/statem/README for further details). This change
+ does have some associated API changes. Notably the SSL_state() function
+ has been removed and replaced by SSL_get_state which now returns an
+ "OSSL_HANDSHAKE_STATE" instead of an int. SSL_set_state() has been removed
+ altogether. The previous handshake states defined in ssl.h and ssl3.h have
+ also been removed.
+ [Matt Caswell]
+
+ *) All instances of the string "ssleay" in the public API were replaced
+ with OpenSSL (case-matching; e.g., OPENSSL_VERSION for #define's)
+ Some error codes related to internal RSA_eay API's were renamed.
+ [Rich Salz]
+
+ *) The demo files in crypto/threads were moved to demo/threads.
+ [Rich Salz]
+
+ *) Removed obsolete engines: 4758cca, aep, atalla, cswift, nuron, gmp,
+ sureware and ubsec.
+ [Matt Caswell, Rich Salz]
+
+ *) New ASN.1 embed macro.
+
+ New ASN.1 macro ASN1_EMBED. This is the same as ASN1_SIMPLE except the
+ structure is not allocated: it is part of the parent. That is instead of
+
+ FOO *x;
+
+ it must be:
+
+ FOO x;
+
+ This reduces memory fragmentation and make it impossible to accidentally
+ set a mandatory field to NULL.
+
+ This currently only works for some fields specifically a SEQUENCE, CHOICE,
+ or ASN1_STRING type which is part of a parent SEQUENCE. Since it is
+ equivalent to ASN1_SIMPLE it cannot be tagged, OPTIONAL, SET OF or
+ SEQUENCE OF.
+ [Steve Henson]
+
+ *) Remove EVP_CHECK_DES_KEY, a compile-time option that never compiled.
+ [Emilia Käsper]
+
+ *) Removed DES and RC4 ciphersuites from DEFAULT. Also removed RC2 although
+ in 1.0.2 EXPORT was already removed and the only RC2 ciphersuite is also
+ an EXPORT one. COMPLEMENTOFDEFAULT has been updated accordingly to add
+ DES and RC4 ciphersuites.
+ [Matt Caswell]
+
+ *) Rewrite EVP_DecodeUpdate (base64 decoding) to fix several bugs.
+ This changes the decoding behaviour for some invalid messages,
+ though the change is mostly in the more lenient direction, and
+ legacy behaviour is preserved as much as possible.
+ [Emilia Käsper]
+
+ *) Fix no-stdio build.
+ [ David Woodhouse <David.Woodhouse@intel.com> and also
+ Ivan Nestlerode <ivan.nestlerode@sonos.com> ]
+
+ *) New testing framework
+ The testing framework has been largely rewritten and is now using
+ perl and the perl modules Test::Harness and an extended variant of
+ Test::More called OpenSSL::Test to do its work. All test scripts in
+ test/ have been rewritten into test recipes, and all direct calls to
+ executables in test/Makefile have become individual recipes using the
+ simplified testing OpenSSL::Test::Simple.
+
+ For documentation on our testing modules, do:
+
+ perldoc test/testlib/OpenSSL/Test/Simple.pm
+ perldoc test/testlib/OpenSSL/Test.pm
+
+ [Richard Levitte]
+
+ *) Revamped memory debug; only -DCRYPTO_MDEBUG and -DCRYPTO_MDEBUG_ABORT
+ are used; the latter aborts on memory leaks (usually checked on exit).
+ Some undocumented "set malloc, etc., hooks" functions were removed
+ and others were changed. All are now documented.
+ [Rich Salz]
+
+ *) In DSA_generate_parameters_ex, if the provided seed is too short,
+ return an error
+ [Rich Salz and Ismo Puustinen <ismo.puustinen@intel.com>]
+
+ *) Rewrite PSK to support ECDHE_PSK, DHE_PSK and RSA_PSK. Add ciphersuites
+ from RFC4279, RFC4785, RFC5487, RFC5489.
+
+ Thanks to Christian J. Dietrich and Giuseppe D'Angelo for the
+ original RSA_PSK patch.
+ [Steve Henson]
+
+ *) Dropped support for the SSL3_FLAGS_DELAY_CLIENT_FINISHED flag. This SSLeay
+ era flag was never set throughout the codebase (only read). Also removed
+ SSL3_FLAGS_POP_BUFFER which was only used if
+ SSL3_FLAGS_DELAY_CLIENT_FINISHED was also set.
+ [Matt Caswell]
+
+ *) Changed the default name options in the "ca", "crl", "req" and "x509"
+ to be "oneline" instead of "compat".
+ [Richard Levitte]
+
+ *) Remove SSL_OP_TLS_BLOCK_PADDING_BUG. This is SSLeay legacy, we're
+ not aware of clients that still exhibit this bug, and the workaround
+ hasn't been working properly for a while.
+ [Emilia Käsper]
+
+ *) The return type of BIO_number_read() and BIO_number_written() as well as
+ the corresponding num_read and num_write members in the BIO structure has
+ changed from unsigned long to uint64_t. On platforms where an unsigned
+ long is 32 bits (e.g. Windows) these counters could overflow if >4Gb is
+ transferred.
+ [Matt Caswell]
+
+ *) Given the pervasive nature of TLS extensions it is inadvisable to run
+ OpenSSL without support for them. It also means that maintaining
+ the OPENSSL_NO_TLSEXT option within the code is very invasive (and probably
+ not well tested). Therefore the OPENSSL_NO_TLSEXT option has been removed.
+ [Matt Caswell]
+
+ *) Removed support for the two export grade static DH ciphersuites
+ EXP-DH-RSA-DES-CBC-SHA and EXP-DH-DSS-DES-CBC-SHA. These two ciphersuites
+ were newly added (along with a number of other static DH ciphersuites) to
+ 1.0.2. However the two export ones have *never* worked since they were
+ introduced. It seems strange in any case to be adding new export
+ ciphersuites, and given "logjam" it also does not seem correct to fix them.
+ [Matt Caswell]
+
+ *) Version negotiation has been rewritten. In particular SSLv23_method(),
+ SSLv23_client_method() and SSLv23_server_method() have been deprecated,
+ and turned into macros which simply call the new preferred function names
+ TLS_method(), TLS_client_method() and TLS_server_method(). All new code
+ should use the new names instead. Also as part of this change the ssl23.h
+ header file has been removed.
+ [Matt Caswell]
+
+ *) Support for Kerberos ciphersuites in TLS (RFC2712) has been removed. This
+ code and the associated standard is no longer considered fit-for-purpose.
+ [Matt Caswell]
+
+ *) RT2547 was closed. When generating a private key, try to make the
+ output file readable only by the owner. This behavior change might
+ be noticeable when interacting with other software.
+
+ *) Documented all exdata functions. Added CRYPTO_free_ex_index.
+ Added a test.
+ [Rich Salz]
+
+ *) Added HTTP GET support to the ocsp command.
+ [Rich Salz]
+
+ *) Changed default digest for the dgst and enc commands from MD5 to
+ sha256
+ [Rich Salz]
+
+ *) RAND_pseudo_bytes has been deprecated. Users should use RAND_bytes instead.
+ [Matt Caswell]