+commit f9476902b789b0481b9df49af88d6ca94fb16fa0
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Dec 15 12:10:47 2009 -0600
+
+ mpc85xx, mpc86xx: Fix gd->cpu pointer after relocation
+
+ The gd->cpu pointer is set to an address located in flash when the
+ probecpu() function is called while U-Boot is executing from flash.
+ This pointer needs to be updated to point to an address in RAM after
+ relocation has occurred otherwise Linux may not be able to boot due to
+ "fdt board" crashing if flash has been erased or changed.
+
+ This bug was introduced in commit
+ a0e2066f392782730f0398095e583c87812d97f2.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Reported-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Tested-by: Kumar Gala <galak@kernel.crashing.org>
+ Tested on MPC8527DS.
+ Tested by: Ed Swarthout <Ed.Swarthout@freescale.com>
+
+commit 3363a34b9eeda9783afcbbed5cdd738926d1f4bf
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Sun Dec 13 17:58:34 2009 -0600
+
+ MVBLUE: Remove CONFIG_CMD_IRQ
+
+ Neither the MVBLUE nor its underlying architecture implement the
+ do_irqinfo() function which is required when CONFIG_CMD_IRQ is defined.
+ This change fixes the following MVBLUE compiler error:
+
+ -> ./MAKEALL MVBLUE
+ Configuring for MVBLUE board...
+ common/libcommon.a(cmd_irq.o):(.u_boot_cmd+0x24): undefined reference to `do_irqinfo'
+ make: *** [u-boot] Error 1
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Acked-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
+
+commit 18e8ad60ee87431c01cc2686985b60cc54f5dd3b
+Author: Detlev Zundel <dzu@denx.de>
+Date: Mon Dec 14 17:54:40 2009 +0100
+
+ imx27lite: Reenable MTD support on NOR flash.
+
+ The support for this was silently dropped by a configuration
+ split during the merge of the imx27lite board support in commit
+ 864aa034f3a0e10ce710e8bbda171df3cab59414 (cmd_mtdparts: Move to common
+ handling of FLASH devices via MTD layer).
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit f4cfe42758192d09f8375e384cc000aa70d97029
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Dec 9 09:01:43 2009 +0100
+
+ nand: Fix access to last block in NAND devices
+
+ Currently, the last block of NAND devices can't be accessed. This patch
+ fixes this issue by correcting the boundary checking (off-by-one error).
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Cc: Scott Wood <scottwood@freescale.com>
+ Cc: Wolfgang Denk <wd@denx.de>
+
+commit 3b887ca8ce72cc12129183538f6e828db13f4867
+Author: Peter Korsgaard <jacmet@sunsite.dk>
+Date: Tue Dec 8 22:20:34 2009 +0100
+
+ mpc83xx: boot time regression, move LCRR setup back to cpu_init_f
+
+ Commit c7190f02 (retain POR values of non-configured ACR, SPCR, SCCR,
+ and LCRR bitfields) moved the LCRR assignment to after relocation
+ to RAM because of the potential problem with changing the local bus
+ clock while executing from flash.
+
+ This change unfortunately adversely affects the boot time, as running
+ all code up to cpu_init_r can cause significant slowdown.
+
+ E.G. on a 8347 board a bootup time increase of ~600ms has been observed:
+
+ 0.020 CPU: e300c1, MPC8347_PBGA_EA, Rev: 3.0 at 400 MHz, CSB: 266.667 MHz
+ 0.168 RS: 232
+ 0.172 I2C: ready
+ 0.176 DRAM: 64 MB
+ 1.236 FLASH: 32 MB
+
+ Versus:
+
+ 0.016 CPU: e300c1, MPC8347_PBGA_EA, Rev: 3.0 at 400 MHz, CSB: 266.667 MHz
+ 0.092 RS: 232
+ 0.092 I2C: ready
+ 0.096 DRAM: 64 MB
+ 0.644 FLASH: 32 MB
+
+ So far no boards have needed the late LCRR setup, so simply revert it
+ for now - If it is needed at a later time, those boards can either do
+ their own final LCRR setup in board code (E.G. in board_early_init_r),
+ or we can introduce a CONFIG_SYS_LCRR_LATE config option to only do
+ the setup in cpu_init_r.
+
+ Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 386118a896554b13f14ad0f82356276988f7de82
+Author: Michal Simek <monstr@monstr.eu>
+Date: Tue Dec 8 09:12:49 2009 +0100
+
+ microblaze: Correct ffs regression for Microblaze
+
+ We are using generic implementation of ffs. This should
+ be part of Simon's commit 0413cfecea350000eab5e591a0965c3e3ee0ff00
+
+ Here is warning message which this patch removes.
+
+ In file included from /tmp/u-boot-microblaze/include/common.h:38,
+ from cmd_mtdparts.c:87:
+ /tmp/u-boot-microblaze/include/linux/bitops.h:123:1: warning: "ffs" redefined
+ In file included from /tmp/u-boot-microblaze/include/linux/bitops.h:110,
+ from /tmp/u-boot-microblaze/include/common.h:38,
+ from cmd_mtdparts.c:87:
+ /tmp/u-boot-microblaze/include/asm/bitops.h:269:1:
+ warning: this is the location of the previous definition
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit 8fe7b29f9811322931f0192a56431edcf819d6b9
+Author: Graeme Smecher <graeme.smecher@mail.mcgill.ca>
+Date: Mon Dec 7 08:09:57 2009 -0800
+
+ microblaze: Stop stack clobbering in microblaze-generic.
+
+ A typo caused the stack and malloc regions to overlap, which prevented
+ mem_malloc_init() from returning. This commit makes the memory layout match
+ the example described in include/configs/microblaze-generic.h
+
+ Signed-off-by: Graeme Smecher <graeme.smecher@mail.mcgill.ca>
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit 0fc52948bda0734431cb528ee4fd82f1dec8c7b5
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Dec 7 23:14:13 2009 +0100
+
+ Update CHANGELOG, prepare -rc2
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit f2352877cb2daac88115192fb09991a2397d0b27
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Sun Dec 6 23:58:28 2009 -0600
+
+ MAKEALL: Fix return value
+
+ Previously MAKEALL would always return a value of 0, even if 1 or more
+ boards did not compile. This change causes MAKEALL to return 0 if all
+ boards were able to build, otherwise 1.
+
+ This change also requires changing the script interpreter from sh to
+ bash to support bash's PIPESTATUS variable.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit fbc1c8f6f6c972524197829c56dd8f2f5da0200a
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Sun Dec 6 01:33:24 2009 -0600
+
+ tools/mkimage: Remove duplicate line of code
+
+ Recent commits 1a99de2cb4d08eb3bf9fb3f60a9d533150de8c0e and
+ 6a590c5f5fd12cdd27f3153522acfac3854590e7 both fixed the same bug in the
+ same manner. Unfortunately git was "smart" enough to merge both changes
+ which resulted in some duplicate code.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+ Reordered code and comment a bit.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit df002fa6b9cd475909ede35bf95b803c2289c6a4
+Author: Heiko Schocher <hs@denx.de>
+Date: Sat Dec 5 11:59:51 2009 +0100
+
+ i2c: fix dangling comment in do_i2c_mw()
+
+ commit bd3784df94bfeca43fbf34094df9cb1bd3ecca3b deleted some unused
+ code in do_i2c_mw(), but missed to also remove the respective
+ commment. This patch fixes this.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit f8450829f921cf10667af98a8d08edfa3d998f04
+Author: Heiko Schocher <hs@denx.de>
+Date: Tue Dec 1 19:30:47 2009 +0100
+
+ 52xx, manroland: add fdt_fixup_memory() in ft_board_setup()
+
+ To update the real memory size in the memory node on the
+ uc101 and mucmc52 boards call fdt_fixup_memory() in
+ ft_board_setup().
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 0ec81db20294efdad2454a753e79f1fe244a43ca
+Author: Daniel Hobi <daniel.hobi@schmid-telecom.ch>
+Date: Tue Dec 1 14:05:55 2009 +0100
+
+ Fix computation in nand_util.c:get_len_incl_bad
+
+ Depending on offset, flash size and the number of bad blocks,
+ get_len_incl_bad may return a too small value which may lead to:
+
+ 1) If there are no bad blocks, nand_{read,write}_skip_bad chooses the
+ bad block aware read/write code. This may hurt performance, but does
+ not have any adverse effects.
+
+ 2) If there are bad blocks, the nand_{read,write}_skip_bad may choose
+ the bad block unaware read/write code (if len_incl_bad == *length)
+ which leads to corrupted data.
+
+ Signed-off-by: Daniel Hobi <daniel.hobi@schmid-telecom.ch>
+
+commit aabb8cb0818e285aeed0cfaf243635997e07554d
+Author: Evan Samanas <esamanas@xes-inc.com>
+Date: Mon Nov 9 20:08:36 2009 -0600
+
+ nfs: NfsTimeout() updates
+
+ - NfsTimeout() does not correctly update the NFS timeout value which
+ results in NfsTimeout() only being called once in certain situations.
+ This can result in the 'nfs' command hanging indefinetly. For
+ example, the command:
+
+ nfs 192.168.0.1:/home/user/file
+
+ will not exit until ctrl-c is pressed if 192.168.0.1 does not have an
+ NFS server running.
+
+ This issue is resolved by reinitializting the NFS timeout value inside
+ NfsTimeout() when a timeout occurs.
+
+ - Make the 'nfs' command print the 'T' character when a timeout occurs.
+ Previously there was no indication that timeouts were occuring.
+
+ - Mimic the 'tftpboot' command and when a download fails print "Retry
+ count exceeded; starting again", and restart the download taking the
+ 'netretry' environment variable into account.
+
+ Signed-off-by: Evan Samanas <esamanas@xes-inc.com>
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+ Tested on TQM8xxL.
+
+ Tested by: Wolfgang Denk <wd@denx.de>
+
+ Tested on MPC8527DS.
+
+ Tested by: Ed Swarthout <Ed.Swarthout@freescale.com>
+
+commit 224c90d1060bf1a83cbf33ca51d060b9d19e0294
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Wed Nov 18 19:08:59 2009 -0600
+
+ bootm: Fix help message's sub-command ordering
+
+ The help message for the 'bootm' command listed the 'cmdline' and 'bdt'
+ sub-commands in the wrong order which resulted in the error below when
+ following the 'help' command's instructions:
+
+ "Trying to execute a command out of order"
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit a93c92cddaedd5f0720e0da15c6664f7a688b582
+Author: Robert P. J. Day <rpjday@crashcourse.ca>
+Date: Tue Nov 17 07:30:23 2009 -0500
+
+ help: Correct syntax of nandecc help output.
+
+ "nandecc" help output should not reproduce the command name, nor have
+ a trailing newline.
+
+ Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
+
+commit c2fff331a32ceca837d76eb7827d6340da270d52
+Author: Mike Rapoport <mike@compulab.co.il>
+Date: Wed Nov 11 10:03:03 2009 +0200
+
+ smc911x: update SMC911X related configuration description
+
+ Since commit 736fead8fdbf8a8407048bebc373cd551d01ec98 "Convert SMC911X
+ Ethernet driver to CONFIG_NET_MULTI API" SMC911X configration options
+ are called CONFIG_SMC911X rather than CONFIG_DRIVER_SMC911X. Update
+ README to reflect that change.
+
+ Signed-off-by: Mike Rapoport <mike@compulab.co.il>
+
+commit 45b6b65c6bf06a589ef3123192af94b0381db27b
+Author: Mike Rapoport <mike@compulab.co.il>
+Date: Wed Nov 11 10:03:09 2009 +0200
+
+ smc911x: fix typo in smc911x_handle_mac_address name
+
+ Signed-off-by: Mike Rapoport <mike@compulab.co.il>
+
+commit f64ef9bb995687e24e0b61b52316f4eaa97c3bbc
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Thu Nov 19 02:47:28 2009 -0600
+
+ fix nfs symlink name corruption
+
+ An off by one error may cause nfs readlink lookup fail if
+ nfs_path_buff has non-zero data from a previous use.
+
+ Loading: *** ERROR: File lookup fail
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+
+commit e8fac25e83426fdf461c66aa8a2530ec28ec536e
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Dec 7 21:06:40 2009 +0100
+
+ at91sam9261ek.c: fix minor coding style issue.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 4713010adf5beda87410d637ebfc58db0db9a9db
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Dec 6 01:21:28 2009 +0100
+
+ trab: fix warning: implicit declaration of function 'disable_vfd'
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit a9f99ab44b473fb394169ba365f8b4380f981584
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Dec 6 00:53:18 2009 +0100
+
+ zlib.c: avoid build conflicts for cradle board
+
+ Commit dce3d79710 updated the zlib code to v0.95; this caused
+ conflicts when building for the "cradle" board, because the (pretty
+ generic) preprocessor variable "OFF" was used in multiple files.
+ Make sure to avoid further conflicts by #undef'ing it in zlib.c
+ before redefining it.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ cc: Giuseppe Condorelli <giuseppe.condorelli@st.com>
+ cc: Angelo Castello <angelo.castello@st.com>
+ cc: Alessandro Rubini <rubini-list@gnudd.com>
+
+commit 8cbf4e4f17121d732e78764f0ba317c9a1838ea6
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Dec 6 00:26:19 2009 +0100
+
+ Fix out-of-tree building of "apollon" board.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit f68ab43de67f59925542efb6bcec30f4a84fe695
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri Dec 4 05:35:15 2009 -0500
+
+ lzma: ignore unset filesizes
+
+ The Linux kernel build system changed how it compresses things with LZMA
+ such that the header no longer contains the filesize (it is instead set to
+ all F's). So if we get a LZMA image that has -1 for the 64bit field,
+ let's just assume that the decompressed size is unknown and continue on.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit cccfc2ab77877dbdd2abe26b28d4c1f467feb0c0
+Author: Detlev Zundel <dzu@denx.de>
+Date: Tue Dec 1 17:16:19 2009 +0100
+
+ README: Rearrange paragraphs to regain linear arrangement.
+
+ Two later additions to the Configuration Option section unfortunately
+ split the description of Show boot progress and the list of its call outs.
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit c81296c16fd9d12422c9968cc0f1d9bf440a7d88
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Nov 24 16:42:10 2009 -0600
+
+ tools/mkimage: Print FIT image contents after creation
+
+ Previously, there was no indication to the user that a FIT image was
+ successfully created after executing mkimage. For example:
+
+ $ mkimage -f uImage.its uImage.itb
+ DTC: dts->dtb on file "uImage.its"
+
+ Adding some additional output after creating a FIT image lets the user
+ know exactly what is contained in their image, eg:
+
+ $ mkimage -f uImage.its uImage.itb
+ DTC: dts->dtb on file "uImage.its"
+ FIT description: Linux kernel 2.6.32-rc7-00201-g7550d6f-dirty
+ Created: Tue Nov 24 15:43:01 2009
+ Image 0 (kernel@1)
+ Description: Linux Kernel 2.6.32-rc7-00201-g7550d6f-dirty
+ Type: Kernel Image
+ Compression: gzip compressed
+ Data Size: 2707311 Bytes = 2643.86 kB = 2.58 MB
+ Architecture: PowerPC
+ OS: Linux
+ Load Address: 0x00000000
+ Entry Point: 0x00000000
+ Hash algo: crc32
+ Hash value: efe0798b
+ Hash algo: sha1
+ Hash value: ecafba8c95684f2c8fec67e33c41ec88df1534d7
+ Image 1 (fdt@1)
+ Description: Flattened Device Tree blob
+ Type: Flat Device Tree
+ Compression: uncompressed
+ Data Size: 12288 Bytes = 12.00 kB = 0.01 MB
+ Architecture: PowerPC
+ Hash algo: crc32
+ Hash value: a5cab676
+ Hash algo: sha1
+ Hash value: 168722b13e305283cfd6603dfe8248cc329adea6
+ Default Configuration: 'config@1'
+ Configuration 0 (config@1)
+ Description: Default Linux kernel
+ Kernel: kernel@1
+ FDT: fdt@1
+
+ This brings the behavior of creating a FIT image in line with creating a
+ standard uImage, which also prints out the uImage contents after
+ creation.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 8e1c89663cc8796b85588910046e03b388a7597c
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Nov 24 16:42:09 2009 -0600
+
+ tools/fit_image.c: Remove unused fit_set_header()
+
+ The FIT fit_set_header() function was copied from the standard uImage's
+ image_set_header() function during mkimage reorganization. However, the
+ fit_set_header() function is not used since FIT images use a standard
+ device tree blob header.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 1a99de2cb4d08eb3bf9fb3f60a9d533150de8c0e
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Nov 24 16:42:08 2009 -0600
+
+ tools/mkimage: Assume FDT image type for FIT images
+
+ When building a Flattened Image Tree (FIT) the image type needs to be
+ "flat_dt". Commit 89a4d6b12fd6394898b8a454cbabeaf1cd59bae5 introduced a
+ regression which caused the user to need to specify the "-T flat_dt"
+ parameter on the command line when building a FIT image. The "-T
+ flat_dt" parameter should not be needed and is at odds with the current
+ FIT image documentation.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 270737acca21f3939f814de5dcf350a1c3d80d83
+Author: Michael Brandt <Michael.Brandt@emsyso.de>
+Date: Sun Nov 22 14:13:27 2009 +0100
+
+ EXT2FS: fix inode size for ext2fs rev#0
+
+ extfs.c assumes that there is always a valid inode_size field in the
+ superblock. But this is not true for ext2fs rev 0. Such ext2fs images
+ are for instance generated by genext2fs. Symptoms on ARM machines are
+ messages like: "raise: Signal # 8 caught"; on PowerPC "ext2ls" will
+ print nothing.
+ This fix checks for rev 0 and uses then 128 bytes as inode size.
+
+ Signed-off-by: Michael Brandt <Michael.Brandt@emsyso.de>
+ Tested on: TQM5200S
+ Tested-by: Wolfgang Denk <wd@denx.de>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit bcb324d68f7955c1136dafc944eb55db8ebaa601
+Author: Robert P. J. Day <rpjday@crashcourse.ca>
+Date: Thu Nov 19 11:00:28 2009 -0500
+
+ Remove superfluous preprocessor tests from some cmd_*.c files.
+
+ A small number of common/cmd_*.c files contain preprocessor tests that
+ are apparently superfluous since those same tests are used in the
+ Makefile to control the compilation of those files. Those tests are
+ clearly redundant as long as they surround the entirety of the source
+ in those files.
+
+ Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
+
+commit ad53226156fa64b6d04c0d1d6e91e09979cbea15
+Author: Robert P. J. Day <rpjday@crashcourse.ca>
+Date: Tue Nov 17 01:59:29 2009 -0500
+
+ README: Update the list of directories.
+
+ Bring the directory listing more into line with current content.
+
+ Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
+
+commit bd3784df94bfeca43fbf34094df9cb1bd3ecca3b
+Author: Pratap Chandu <pratap.rrke@gmail.com>
+Date: Thu Nov 12 19:28:25 2009 +0530
+
+ Removes dead code in the file common/cmd_i2c.c
+
+ There is some dead code enclosed by #if 0 .... #endif in the file
+ common/cmd_i2c.c
+ This patch removes the dead code.
+
+ Signed-off-by: Pratap Chandu <pratap.rrke@gmail.com>
+
+commit 64a480601a5614b441de692ae15a62c51e0bb381
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Nov 11 17:51:56 2009 -0500
+
+ smc91111_eeprom: drop CONFIG stub protection
+
+ Since the Makefile now controls the compilation of this, there is no need
+ for CONFIG checking nor the stub function.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit f3a7bddc06c927c36a1a99a97131299479ef207a
+Author: Magnus Lilja <lilja.magnus@gmail.com>
+Date: Wed Nov 11 19:56:58 2009 +0100
+
+ RTC: Fix return code in MC13783 RTC driver.
+
+ Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
+
+commit d52e3e0176a74c30549251e16c5c00a363c544d2
+Author: Magnus Lilja <lilja.magnus@gmail.com>
+Date: Wed Nov 11 19:56:36 2009 +0100
+
+ cmd_date: Fix spelling in error message.
+
+ Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
+
+commit c253122395753abb9e531d8906c5265dc8803fb1
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Wed Nov 11 10:36:28 2009 -0600
+
+ Move do_irqinfo() to common/cmd_irq.c
+
+ cmd_irq.c is a much better home and it is already conditionally
+ compiled based on CONFIG_CMD_IRQ.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit a5dd4dc64fe68e549c5ffcf6a048281b5ba94752
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Wed Nov 11 10:36:19 2009 -0600
+
+ cmd_license: Remove unneeded #ifdef CONFIG_CMD_LICENSE
+
+ cmd_license is already conditionally compiled at the Makefile-level.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 06015146a15adc7455440c491d543f6a8091551d
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Nov 9 15:18:52 2009 -0600
+
+ m41t11: Remove unused functions
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 9ef78511cda39987e5fc10febf386fd19f58ecf7
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Nov 9 15:17:50 2009 -0600
+
+ circbuf: Move to lib_generic and conditionally compile
+
+ circbuf could be used as a generic library and is only currently
+ needed when CONFIG_USB_TTY is defined.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 604f7ce55ad74694ef8743ad2e99933dc0265e46
+Author: Sanjeev Premi <premi@ti.com>
+Date: Mon Nov 9 22:43:00 2009 +0530
+
+ Fix build failure in examples/standalone
+
+ Some versions of 'make' do not handle trailing white-spaces
+ properly. Trailing spaces in ELF causes a 'fake' source to
+ be added to the variable COBJS; leading to build failure
+ (listed below). The problem was found with GNU Make 3.80.
+
+ Using text-function 'strip' as a workaround for the problem.
+
+ make[1]: Entering directory `/home/sanjeev/u-boot/examples/standalone'
+ arm-none-linux-gnueabi-gcc -g -Os -fno-common -ffixed-r8 -msoft-float
+ -D__KERNEL__ -DTEXT_BASE=0x80e80000 -I/home/sanjeev/u-boot/include
+ -fno-builtin -ffreestanding -nostdinc -isystem /opt/codesourcery/2009q1-
+ 203/bin/../lib/gcc/arm-none-linux-gnueabi/4.3.3/include -pipe -DCONFIG_
+ ARM -D__ARM__ -marm -mabi=aapcs-linux -mno-thumb-interwork -march=armv5
+ -Wall -Wstrict-prototypes -fno-stack-protector -g -Os -fno-common -ff
+ ixed-r8 -msoft-float -D__KERNEL__ -DTEXT_BASE=0x80e80000 -I/home/sanje
+ ev/u-boot/include -fno-builtin -ffreestanding -nostdinc -isystem /opt/co
+ desourcery/2009q1-203/bin/../lib/gcc/arm-none-linux-gnueabi/4.3.3/includ
+ e -pipe -DCONFIG_ARM -D__ARM__ -marm -mabi=aapcs-linux -mno-thumb-inte
+ rwork -march=armv5 -I.. -Bstatic -T u-boot.lds -Ttext 0x80e80000 -o .c
+ arm-none-linux-gnueabi-gcc: no input files
+ make[1]: *** [.c] Error 1
+ make[1]: Leaving directory `/home/sanjeev/u-boot/examples/standalone'
+ make: *** [examples/standalone] Error 2
+ premi #
+
+ Signed-off-by: Sanjeev Premi <premi@ti.com>
+
+ Fixed typo (s/ElF/ELF/).
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit af860962b544ddf323c4ff68454f00d31e44df0a
+Author: Becky Bruce <beckyb@kernel.crashing.org>
+Date: Wed Nov 4 18:30:08 2009 -0600
+
+ 85xx: Remove unused CONFIG_ASSUME_AMD_FLASH from config files
+
+ A bunch of the 85xx boards have this cruft in them - it's not used
+ anywhere. Delete it.
+
+ Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
+
+commit deec1fbd4f704dded2e668bb9e368631981ea139
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Dec 2 22:26:30 2009 +0100
+
+ MAINTAINERS: update responsible for MPC85xx/86xx
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: Kumar Gala <galak@kernel.crashing.org>
+ Cc: Becky Bruce <beckyb@kernel.crashing.org>
+
+commit 824d82997fbcf28e49081d36fdd5d3be1b92b03d
+Author: Ira W. Snyder <iws@ovro.caltech.edu>
+Date: Wed Nov 4 13:37:59 2009 -0800
+
+ Fix example FIT image source files
+
+ The example FIT image source files do not compile with the latest dtc and
+ mkimage. The following error message is produced:
+
+ DTC: dts->dtb on file "kernel.its"
+ Error: kernel.its 7:0 - 1:0 syntax error
+ FATAL ERROR: Unable to parse input tree
+ ./mkimage: Can't read kernel.itb.tmp: Invalid argument
+
+ The FIT image source files are missing the "/dts-v1/;" directive at the
+ beginning of the file. Add the directive to the examples.
+
+ Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
+
+commit fd66066ee3ce15c2966feb9b2be0f0d51a95db48
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Nov 4 16:13:19 2009 -0500
+
+ img2srec: use standard types
+
+ The img2srec code creates a lot of typedefs with common names. These
+ easily clash with system headers that include these typedefs (like mingw).
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 8204e068110e8abe5db9c3b7df9971b58cda8f26
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Nov 4 16:03:25 2009 -0500
+
+ tools: gitignore *.exe binaries
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 425d3b666eee5c58fdb82fb894a535dd71782a05
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Nov 3 23:31:07 2009 -0600
+
+ ppc: Move conditional compilation of kgdb.c to Makefile
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit e06ab6546b332acc55ac4e7c31338662328b0fb3
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Nov 3 11:36:39 2009 -0500
+
+ spi_flash.h: pull in linux/types.h for u## types
+
+commit 0008555f4d57c15ad86ee735861ca0d783042f61
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Nov 3 11:36:26 2009 -0500
+
+ bootm: mark local boot_os[] table static
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit a8fa379d47f06c7d3ed75c8fb26ae43ee38e1fd7
+Author: Nishanth Menon <nm@ti.com>
+Date: Mon Nov 2 09:40:18 2009 -0600
+
+ mkconfig: deny messed up ARCH definition
+
+ Refuse to setup a platform if the command line ARCH= is not the same
+ as the one required for the board. This prevents any user with
+ prehistoric aliases from messing up their builds.
+
+ Reported in thread:
+ http://old.nabble.com/-U-Boot--Build-breaks-on-some-OMAP3-configs-to26132721.html
+
+ Inputs from: Mike Frysinger and Wolfgang Denk:
+ http://lists.denx.de/pipermail/u-boot/2009-November/063642.html
+
+ Cc: Wolfgang Denk <wd@denx.de>
+ Cc: Mike Frysinger <vapier@gentoo.org>
+ Cc: Anand Gadiyar <gadiyar@ti.com>
+ Cc: Dirk Behme <dirk.behme@googlemail.com>
+ Signed-off-by: Nishanth Menon <nm@ti.com>
+
+commit 67b96e87da1b84660fa1e5b78cc760246d116814
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Wed Oct 28 22:13:39 2009 +0100
+
+ Repair the 'netretry=once' option.
+
+ 'netretry = once' does the same as 'netretry = yes', because it is not stored
+ when it was tried once.
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit b25e38fc36e13fa8037fa4d37fe909d1d6e6f372
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Thu Oct 29 14:24:22 2009 +0100
+
+ Repair build fail in case CONFIG_PPC=n and CONFIG_FIT=y
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 01826abc02ce160501534788e63629ccbe31b05c
+Author: Grazvydas Ignotas <notasas@gmail.com>
+Date: Thu Nov 12 11:46:07 2009 +0200
+
+ OMAP3: pandora: fix booting without serial attached
+
+ When the board is booted without serial cable attached (which
+ is how most of them will be used) UART RX is left floating and
+ sometimes picks noise, which interrupts countdown and enters
+ U-Boot prompt instead of booting the kernel.
+
+ Fix this by setting up internal pullup on UART RX pin. This
+ does not prevent serial from working as the internal pullup
+ is weak.
+
+ Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
+
+commit 41dfd8a60324243dbe2dc313a607910824a68aa7
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Wed Oct 28 22:13:37 2009 +0100
+
+ Add support for CS2 dataflash for Atmel-SPI.
+
+ The only missing chipselect line support is CS2, and I need it on
+ CS2...
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit faf36c1437c95e4a86835633d9801c5f6396a3c7
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Wed Oct 28 22:13:36 2009 +0100
+
+ Fix mingw tools build
+
+ mkimage does not build due to missing strtok_r() and getline() implementation
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 6a590c5f5fd12cdd27f3153522acfac3854590e7
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Wed Oct 28 22:13:35 2009 +0100
+
+ Building of FIT images does not work.
+
+ The type is not set for generation of the FIT images, resulting
+ in no images being created without printing or returning an error
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 0a7691e820e33b23f61c6ea0ef6fa72099d1a6ae
+Author: Renato Andreola <renato.andreola@imagos.it>
+Date: Mon Nov 23 16:45:14 2009 -0500
+
+ Nios2: do_boom_linux(): kernel gunzip input data integrity problem due to
+ missing cache flush.
+
+ Added instruction and data caches flush.
+
+ Signed-off-by: Scott McNutt <smcnutt@psyent.com>
+
+commit de03825386eaedb5e17261dd87cde86e9a764ba9
+Author: Scott McNutt <smcnutt@psyent.com>
+Date: Mon Nov 23 16:29:40 2009 -0500
+
+ Nios2: Fix compiler warnings in lib_nios2/board.c (unused variables)
+
+ Signed-off-by: Scott McNutt <smcnutt@psyent.com>
+
+commit 57baa379cf2f67df89a5c6052767fd25daff20bd
+Author: Scott McNutt <smcnutt@psyent.com>
+Date: Mon Nov 23 15:54:25 2009 -0500
+
+ Nios2/Nios: Remove unnecessary (residual) linker Nios command scripts from
+ the standalone examples.
+
+ Signed-off-by: Scott McNutt <smcnutt@psyent.com>
+
+commit fcffb680e77fcb48598d4a9944dbe2d4503170e0
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Oct 14 19:28:03 2009 -0400
+
+ sf: fix stmicro offset setup while erasing
+
+ Reported-by: Peter Gombos <gombos@protecta.hu>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit d394a7795027d96ca55799df40bd5c4a13dbeebe
+Author: Jason McMullan <mcmullan@netapp.com>
+Date: Fri Oct 9 17:12:23 2009 -0400
+
+ sf: new driver for Winbond W25X16/32/64 devices
+
+ Signed-off-by: Jason McMullan <jason.mcmullan@gmail.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit cada315100c88894b85972a91309a6f2413966b6
+Author: Marcel Ziswiler <marcel@ziswiler.com>
+Date: Thu Oct 1 23:55:17 2009 +0200
+
+ mpc8260: move FDT memory node fixup into common CPU code.
+
+ Signed-off-by: Marcel Ziswiler <marcel.ziswiler@noser.com>
+ Tested-by: Heiko Schocher <hs@denx.de>
+
+commit f2cea405f83da46b72098ea874fb3eefe185d312
+Author: Po-Yu Chuang <ratbert.chuang@gmail.com>
+Date: Wed Sep 23 15:52:35 2009 +0800
+
+ Add driver for FTRTC010 real time clock
+
+ Signed-off-by: Po-Yu Chuang <ratbert@faraday-tech.com>
+
+ Edited commit message.
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit c0356a88011330646e960dfac8a2c909bede3304
+Author: Mark Jackson <mpfj-list@mimc.co.uk>
+Date: Mon Aug 17 16:42:52 2009 +0100
+
+ MIMC200: set default fbmem value
+
+ This patch adds a default bootargs "fbmem" value to the
+ CONFIG_BOOTARGS string for the MIMC200 board.
+
+ Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
+
+commit 3ffc0d61bad7d986e344ce7062b37c5c8f04fb0e
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Oct 27 19:58:09 2009 +0100
+
+ ppc4xx: Initialize magnetic coupler on VOM405 boards
+
+ This patch fixes an ugly behavior of the IL712 magnetic coupler
+ as used on VOM405. These parts will remember their last state
+ over a power cycle which might cause unwanted behavior.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit be0db3e3141c6c6b4e232b51091f35a284cc54e5
+Author: Matthias Fuchs <matthias.fuchs@esd.eu>
+Date: Mon Oct 26 09:58:45 2009 +0100
+
+ ppc4xx: Initialize magnetic couplers in PLU405
+
+ This patch fixes an ugly behavior of the IL712 magnetic couplers
+ as used on PLU405. These parts will remember their last state
+ over a power cycle which might cause unwanted behavior.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 067f54c66acd469870ef6946e1591bfcc02de1b3
+Author: Matthias Fuchs <matthias.fuchs@esd.eu>
+Date: Mon Oct 26 09:55:40 2009 +0100
+
+ Add minimal SJA1000 header for basic CAN mode
+
+ This patch is in preparation for the upcoming PLU405 board fix.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit cdbdbe65f5f006cba208accee5a126c659d4b867
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Nov 13 08:52:21 2009 -0600
+
+ ppc/85xx: Fix how we determine the number of CAM entries
+
+ We were incorrectly use the max CAM size as the number of entries in
+ the array for setting up the addrmap. We should be using the NENTRY
+ field which is the low 12-bits of TLB1CFG.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit fbd47b6753b08162436d9ccad1e63c8d43ede54c
+Author: Mike Rapoport <mike@compulab.co.il>
+Date: Thu Nov 12 15:35:08 2009 +0200
+
+ smc911x: make smc911x_initialize return correct value
+
+ Make smc911x_initialize return -1 on error and number of interfaces
+ detected otherwise.
+
+ Signed-off-by: Mike Rapoport <mike@compulab.co.il>
+ Acked-by: Mike Frysinger <vapier@gentoo.org>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit c44efcf97b335dcef7d014f65b7d3094e79adb13
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Nov 12 22:26:02 2009 -0500
+
+ smc911x_eeprom: fix building after smc911x overhaul
+
+ When the smc911x driver was converted to NET_MULTI, the smc911x eeprom was
+ missed. The config option needed updating as well as overhauling of the
+ rergister read/write functions.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Tested-by: Mike Rapoport <mike.rapoport@gmail.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 3ad95deb30ac73bd57e966d321215a17d3236f9f
+Author: Dave Liu <daveliu@freescale.com>
+Date: Thu Nov 12 07:26:37 2009 +0800
+
+ fsl-ddr: Fix the chip-select interleaving issue
+
+ commit 1542fbdeec0d1e2a6df13189df8dcb1ce8802be3
+ introduced one new bug to chip-select interleaving.
+
+ Single DDR controller also can do the chip-select
+ interleaving if there is dual-rank or qual-rank DIMMs.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 651ef90fa6ca824c8e581aeef9e04bbbe7f7e9ce
+Author: javier Martin <javier.martin@vista-silicon.com>
+Date: Thu Oct 29 08:22:43 2009 +0100
+
+ mxc_fec: avoid free() calls to already freed pointers.
+
+ Sometimes, inside NetLoop, eth_halt() is called before eth_init() has
+ been called. This is harmless except for free() calls to pointers
+ which have not been allocated yet.
+
+ This patch initializes those pointers to NULL and allocates them only
+ the first time. This way we can get rid of free calls in halt callback.
+
+ This has been tested in i.MX27 Litekit board and eldk-4.2 toolchains.
+
+ Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit e8f1546a88b4ade6a910c4a7958a774ee1b40023
+Author: javier Martin <javier.martin@vista-silicon.com>
+Date: Thu Oct 29 08:18:34 2009 +0100
+
+ mxc_fec: fix some erroneous PHY accesses.
+
+ This patch fixes erroneous access to the ethernet PHY which broke the driver.
+ 1. Selector field in the auto-negotiation register must be 0x00001 for
+ using 802.3, not 0x00000 which is reseved.
+ 2. Access to the PHY address specified by CONFIG_FEC_MXC_PHYADDR, not
+ 0x0 fixed address.
+
+ This has been tested in i.MX27 Litekit board and eldk-4.2 toolchains.
+
+ Now using proper defines for auto-negotiation register.
+
+ Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit f865fcbbb35851e75fee9c3a3fa8e0f71d9e6463
+Author: Ron Lee <ron@debian.org>
+Date: Wed Aug 5 20:14:01 2009 +0200
+
+ ARM Don't inline weak symbols
+
+ ------------------------------------------------------------------------
+
+ GCC 4.4 complains about this now.
+
+ Signed-off-by: Ron Lee <ron@debian.org>
+
+commit d14c7ec2b51fb92c4a5218b299b772c3d186510d
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Mon Nov 9 13:09:57 2009 -0800
+
+ Fix SMC91111 regression: lpd7a40x build failures
+
+ Both lpd7a400 and lpd7a404 failed to compile because they had
+ CONFIG_SMC_USE_IOFUNCS defined:
+
+ examples/standalone/smc91111_eeprom.c:388: undefined reference to `SMC_outw'
+
+ Also removed an orphaned paren in lpd7a404.h
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 1031ae960ce6ce8332190278a06e2d72c2b2793e
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Mon Nov 9 14:01:08 2009 -0800
+
+ SMC91111: Clean up SMC_inx macros on xsengine and xaeniax
+
+ This patch fixes the following warnings:
+
+ Configuring for xaeniax board...
+ smc91111_eeprom.c: In function 'print_macaddr':
+ smc91111_eeprom.c:278: warning: suggest parentheses around + or - in operand of &
+ smc91111_eeprom.c:281: warning: suggest parentheses around + or - in operand of &
+ ...
+ Configuring for xsengine board...
+ smc91111_eeprom.c: In function 'print_macaddr':
+ smc91111_eeprom.c:278: warning: suggest parentheses around + or - inside shift
+ smc91111_eeprom.c:281: warning: suggest parentheses around + or - inside shift
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 830c7b6722c6a9762411bf52a7bf2fae4dc71dab
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Mon Nov 9 11:43:18 2009 -0800
+
+ Fix CS8900 regression on impa7 board
+
+ The following error was seen on impa7 board, due to its use of a 32-bit bus
+ on CS8900.
+ cs8900.c:137:37: error: macro "get_reg_init_bus" passed 2 arguments, but takes just 1
+
+ This patch gives the macro the correct number of arguments
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit e5c5d9e0834bacf1c4787fa76cc4e369f2597cf5
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Nov 1 22:39:56 2009 -0500
+
+ clarify eth driver halt/recv steps
+
+ The dev->halt() func can be called at any time, and the dev->recv() func
+ does not need to use NetRxPackets[] when calling NetReceive().
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 497ab0eec5e1e2dfccc141a4485cd6b940e1424a
+Author: Hui.Tang <zetalabs@gmail.com>
+Date: Thu Nov 5 09:58:44 2009 +0800
+
+ Fix cs8900 dev->priv not init issue
+
+ Ensure all CS8900 data structures are assigned before accessing device
+
+ Signed-off-by: Hui.Tang <zetalabs@gmail.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 4fe5193d464ecdac26ddc71b1351be5b86bbff29
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Nov 3 14:34:45 2009 +0100
+
+ ppc4xx: 44x_spd_ddr2.c: Fix register macro ECCCR -> ECCES (SDRAM_ECCES)
+
+ This error only appears when DEBUG is enabled in this driver. That's why
+ it went unnoticed till now.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 916ed9444d3ab7b5cd6312557005f2a764a8baf7
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Oct 29 18:37:45 2009 +0100
+
+ ppc4xx: Canyonlands: Change EBC bus config to drive always (no high-z)
+
+ This patch fixes a problem only seen very occasionally on Canyonlands.
+ The NOR flash interface (CFI driver) doesn't work reliably in all cases.
+ Erasing and/or programming sometimes doesn't work. Sometimes with
+ an error message, like "flash not erased" when trying to program an
+ area that should have just been erased. And sometimes without any error
+ messages. As mentioned above, this problem was only seen rarely and with
+ some PLL configuration (CPU speed, EBC speed).
+
+ Now I spotted this problem a few times, when running my Canyonlands with
+ the following setup (chip_config):
+
+ 1000-nor - NOR CPU:1000 PLB: 200 OPB: 100 EBC: 100
+
+ Changing the EBC configuration to not release the bus into high
+ impedance state inbetween the transfers (ATC, DTC and CTC bits set to 1
+ in EBC0_CFG) seems to fix this problem. I haven't seen any failure
+ anymore with this patch applied.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Cc: David Mitchell <dmitchell@amcc.com>
+ Cc: Jeff Mann <MannJ@embeddedplanet.com>
+
+commit 25793f76bf9a7be59c9415ef0f78d034e8d53dae
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Thu Oct 29 12:29:37 2009 +0100
+
+ ARM: Use Linux version for unaligned access code
+
+ The asm-arm/unaligned.h includes linux/unaligned/access_ok.h
+ This file is unsafe to be used on ARM, since it does an unaligned memory
+ accesses which fails on ARM.
+
+ Lookin at Linux the basic difference seems to be the header
+ "include/asm-arm/unaligned.h". The Linux version of "unaligned.h"
+ does *not* include "access_ok.h" at all. It includes "le_byteshift.h"
+ and "be_byteshift.h" instead.
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ --
+ include/asm-arm/unaligned.h | 3 -
+ include/linux/unaligned/be_byteshift.h | 70 +++++++++++++++++++++++++++++++++
+ include/linux/unaligned/le_byteshift.h | 70 +++++++++++++++++++++++++++++++++
+ 3 files changed, 142 insertions(+), 1 deletion(-)
+ create mode 100644 include/linux/unaligned/be_byteshift.h
+ create mode 100644 include/linux/unaligned/le_byteshift.h
+
+commit 6d6e7c53d5c75e5e24841c5506f4ed9d82adee09
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Nov 4 18:02:10 2009 -0600
+
+ ppc/85xx: Fix inclusion of 83xx immap in 85xx builds
+
+ The nand_boot_fsl_elbc.c is shared between 83xx & 85xx however we should
+ not be including the immap_83xx.h when building 85xx. We can just get
+ this all from common.h
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 107b579c75256212d4bf8b99ee8d68e0078f3646
+Author: Becky Bruce <beckyb@kernel.crashing.org>
+Date: Wed Nov 4 17:34:04 2009 -0600
+
+ 86xx: Remove redundant code in initdram
+
+ The same code exists both inside an #ifdef and outside of it.
+ Remove the extra code for all the 86xx boards.
+
+ Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 715d8f7608f77c93f1807a032644893fd5b6d08b
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Mon Nov 2 09:05:49 2009 -0600
+
+ fsl_pci_init_port end-point initialization is broken
+
+ commit 70ed869e broke fsl pcie end-point initialization.
+ Returning 0 is not correct. The function must return the first free
+ bus number for the next controller.
+
+ fsl_pci_init() must still be called and a bus allocated even if the
+ controller is an end-point.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Acked-by: Vivek Mahajan <vivek.mahajan@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 01471d538fb163f472a769f21267d7676c91267c
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Nov 4 01:29:04 2009 -0600
+
+ Revert "ppc/85xx/pci: fsl_pci_init: pcie agent mode support"
+
+ This reverts commit 70ed869ea5f6b1d13d7b140c83ec0dcd8a127ddc.
+
+ There isn't any need to modify the API for fsl_pci_init_port to pass the
+ status of host/agent(end-point) status. We can determine that
+ internally to fsl_pci_init_port. Revert the patch that makes the API
+ change.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit ff88229549e08fdd3f9127c1cc4db11a3576250f
+Author: Dave Liu <daveliu@freescale.com>
+Date: Sat Oct 31 07:59:55 2009 +0800
+
+ ppc/85xx: Fix misc L2 cache enabling bug
+
+ We need loop-check the flash clear lock and enable bit for L2 cache.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 59434fe243962758742af5cb8e2ced976e17c302
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Fri Oct 30 10:16:27 2009 +0900
+
+ sh: Update lowlevel_init.S of espt-giga
+
+ There was the point that did not use write macro.
+ Change to write macro.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit f1cae1969d9e971fb72827a5731ce7e752464aa2
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Fri Oct 30 10:01:25 2009 +0900
+
+ sh: Move some defs to convince 'pcrel too far'
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ Signed-off-by: Takashi Yoshii <yoshii.takashi@gmail.com>
+
+commit 0f9eaf4b323ea0ca95944b84c7465b81ba575514
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Thu Oct 15 13:36:34 2009 +0900
+
+ sh: Remove malloc_bin_reloc from lib_sh, lib_nios2 and lib_nios.
+
+ By "arm/microblaze/nios/nios2/sh: Remove relocation fixups"
+ (commit: 0630535e2d062dd73c1ceca5c6125c86d1127a49", doesn't need
+ malloc_bin_reloc function. This commit remove this.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 0775437293a6963cb21244dfae6978cbf67c6bfe
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Wed Oct 21 21:53:39 2009 -0700
+
+ Fix DM9000 MAC address handling
+
+ Proper behavior is to pull MAC address from NVRAM in the initialization() an
+ stuff it in dev->address, then program the device from dev->address in
+ the init() function.
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 98d92d8c9f4021629a45261ad5ec3f3595f3a27a
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Oct 28 22:07:56 2009 +0100
+
+ sbc8349: fix incorrect comment
+
+ The comment for the BR0_PRELIM port size initialization incorrectly
+ stated 32 bit, while it's actually 16 bit. The code is correct.
+
+ Reported-by: Guenter Koellner <guenter.koellner@nsn.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit a38f85e180a30b6225808828ded1017b1a5418c6
+Author: Sandeep Paulraj <s-paulraj@ti.com>
+Date: Wed Oct 28 11:05:03 2009 -0400
+
+ Fix Compliation warning for TNY-A9260 and TNY-A9G20
+
+ The patch fixes a compilation warning by defining
+ CONFIG_SYS_64BIT_VSPRINTF in the config file
+
+ Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
+
+commit 264e42ee54f1d322805d9068168fd362b413fd09
+Author: Sandeep Paulraj <s-paulraj@ti.com>
+Date: Wed Oct 28 11:04:53 2009 -0400
+
+ Fix Compliation warning for SBC35-A9G20 board
+
+ The patch fixes a compilation warning by defining
+ CONFIG_SYS_64BIT_VSPRINTF in the config file
+
+ Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
+
+commit 353462f6ff9769091fb644d44d8025f20a4192d9
+Author: Eric Millbrandt <emillbrandt@coldhaus.com>
+Date: Wed Oct 28 09:37:33 2009 -0500
+
+ galaxy5200: Add default environment variables
+
+ Extend bootdelay to 10 seconds. Set boot retry time to 120 seconds and use
+ reset to retry. Define default bootcommand and bootargs for production.
+
+ Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com>
+
+commit fa36ae790eb10ce70935f9a78f07703719dca422
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Oct 27 15:15:55 2009 +0100
+
+ cfi: Add weak default function for flash_cmd_reset()
+
+ Currently the CFI driver issues both AMD and Intel reset commands.
+ This is because the driver doesn't know yet which chips are connected.
+ This dual reset seems to cause problems with the M29W128G chips as
+ reported by Richard Retanubun. This patch now introduces a weak default
+ function for the CFI reset command, still with both resets. This can
+ be overridden by a board specific version if necessary.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Cc: Richard Retanubun <RichardRetanubun@ruggedcom.com>
+
+commit 4946775c6db52dba28f72ba3525764b54f1d4593
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Oct 28 00:49:47 2009 +0100
+
+ Coding Style cleanup; update CHANGELOG, prepare -rc1
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+