# Note that the port field in the main menu overrides this setting.
remote_port (Remote port) int 30000 1 65535
+# Whether to support older servers before protocol version 25.
+# Enable if you want to connect to 0.4.12 servers and before.
+# Servers starting with 0.4.13 will work, 0.4.12-dev servers may work.
+# Disabling this option will protect your password better.
+send_pre_v25_init (Support older servers) bool true
+
# Save the map received by the client on disk.
enable_local_map_saving (Saving map received from server) bool false
+# Show entity selection boxes
+show_entity_selectionbox (Show entity selection boxes) bool true
+
# Enable usage of remote media server (if provided by server).
# Remote servers offer a significantly faster way to download media (e.g. textures)
# when connecting to the server.
# Path to save screenshots at.
screenshot_path (Screenshot folder) path
+# Format of screenshots.
+screenshot_format (Screenshot format) enum png png,jpg,bmp,pcx,ppm,tga
+
+# Screenshot quality. Only used for JPEG format.
+# 1 means worst quality; 100 means best quality.
+# Use 0 for default quality.
+screenshot_quality (Screenshot quality) int 0 0 100
+
[**Advanced]
# Adjust dpi configuration to your screen (non X11/Android only) e.g. for 4k screens.
# See /privs in game for a full list on your server and mod configuration.
default_privs (Default privileges) string interact, shout
+# Privileges that players with basic_privs can grant
+basic_privs (Basic Privileges) string interact, shout
+
# Whether players are shown to clients without any range limit.
# Deprecated, use the setting player_transfer_distance instead.
unlimited_player_transfer_distance (Unlimited player transfer distance) bool true
# Length of a server tick and the interval at which objects are generally updated over network.
dedicated_server_step (Dedicated server step) float 0.1
+# Time in between active block management cycles
+active_block_mgmt_interval (Active Block Management interval) float 2.0
+
+# Length of time between ABM execution cycles
+abm_interval (Active Block Modifier interval) float 1.0
+
+# Length of time between NodeTimer execution cycles
+nodetimer_interval (NodeTimer interval) float 1.0
+
# If enabled, invalid world data won't cause the server to shut down.
# Only enable this if you know what you are doing.
ignore_world_load_errors (Ignore world errors) bool false
# Global map generation attributes.
# In Mapgen v6 the 'decorations' flag controls all decorations except trees
# and junglegrass, in all other mapgens this flag controls all decorations.
+# The default flags set in the engine are: caves, light, decorations
+# The flags string modifies the engine defaults.
# Flags that are not specified in the flag string are not modified from the default.
-# Flags starting with "no" are used to explicitly disable them.
+# Flags starting with 'no' are used to explicitly disable them.
mg_flags (Mapgen flags) flags caves,dungeons,light,decorations caves,dungeons,light,decorations,nocaves,nodungeons,nolight,nodecorations
[**Advanced]
[***Mapgen v5]
+# Controls width of tunnels, a smaller value creates wider tunnels.
+mgv5_cave_width (Mapgen v5 cave width) float 0.125
+
mgv5_np_filler_depth (Mapgen v5 filler depth noise parameters) noise_params 0, 1, (150, 150, 150), 261, 4, 0.7, 2.0
mgv5_np_factor (Mapgen v5 factor noise parameters) noise_params 0, 1, (250, 250, 250), 920381, 3, 0.45, 2.0
mgv5_np_height (Mapgen v5 height noise parameters) noise_params 0, 10, (250, 250, 250), 84174, 4, 0.5, 2.0
[***Mapgen v6]
# Map generation attributes specific to Mapgen v6.
-# When snowbiomes are enabled jungles are enabled and the jungles flag is ignored.
+# When snowbiomes are enabled jungles are automatically enabled, the 'jungles' flag is ignored.
+# The default flags set in the engine are: biomeblend, mudflow
+# The flags string modifies the engine defaults.
# Flags that are not specified in the flag string are not modified from the default.
-# Flags starting with "no" are used to explicitly disable them.
+# Flags starting with 'no' are used to explicitly disable them.
mgv6_spflags (Mapgen v6 flags) flags jungles,biomeblend,mudflow,snowbiomes,trees jungles,biomeblend,mudflow,snowbiomes,flat,trees,nojungles,nobiomeblend,nomudflow,nosnowbiomes,noflat,notrees
# Controls size of deserts and beaches in Mapgen v6.
[***Mapgen v7]
# Map generation attributes specific to Mapgen v7.
-# 'ridges' are the rivers.
+# The 'ridges' flag controls the rivers.
+# The default flags set in the engine are: mountains, ridges
+# The flags string modifies the engine defaults.
# Flags that are not specified in the flag string are not modified from the default.
-# Flags starting with "no" are used to explicitly disable them.
+# Flags starting with 'no' are used to explicitly disable them.
mgv7_spflags (Mapgen v7 flags) flags mountains,ridges mountains,ridges,nomountains,noridges
+# Controls width of tunnels, a smaller value creates wider tunnels.
+mgv7_cave_width (Mapgen v7 cave width) float 0.3
+
mgv7_np_terrain_base (Mapgen v7 terrain base noise parameters) noise_params 4, 70, (600, 600, 600), 82341, 5, 0.6, 2.0
mgv7_np_terrain_alt (Mapgen v7 terrain altitude noise parameters) noise_params 4, 25, (600, 600, 600), 5934, 5, 0.6, 2.0
mgv7_np_terrain_persist (Mapgen v7 terrain persistation noise parameters) noise_params 0.6, 0.1, (2000, 2000, 2000), 539, 3, 0.6, 2.0
-mgv7_np_height_select (Mapgen v7 height select noise parameters) noise_params -12, 24, (500, 500, 500), 4213, 6, 0.7, 2.0
+mgv7_np_height_select (Mapgen v7 height select noise parameters) noise_params -8, 16, (500, 500, 500), 4213, 6, 0.7, 2.0
mgv7_np_filler_depth (Mapgen v7 filler depth noise parameters) noise_params 0, 1.2, (150, 150, 150), 261, 3, 0.7, 2.0
mgv7_np_mount_height (Mapgen v7 mount height noise parameters) noise_params 256, 112, (1000, 1000, 1000), 72449, 3, 0.6, 2.0
mgv7_np_ridge_uwater (Mapgen v7 ridge water noise parameters) noise_params 0, 1, (1000, 1000, 1000), 85039, 5, 0.6, 2.0
[***Mapgen flat]
# Map generation attributes specific to Mapgen flat.
-# Occasional lakes and hills added to the flat world.
+# Occasional lakes and hills can be added to the flat world.
+# The default flags set in the engine are: none
+# The flags string modifies the engine defaults.
# Flags that are not specified in the flag string are not modified from the default.
-# Flags starting with "no" are used to explicitly disable them.
+# Flags starting with 'no' are used to explicitly disable them.
mgflat_spflags (Mapgen flat flags) flags lakes,hills,,nolakes,nohills
# Y of flat ground.
# Y of upper limit of large pseudorandom caves.
mgflat_large_cave_depth (Mapgen flat large cave depth) int -33
+# Controls width of tunnels, a smaller value creates wider tunnels.
+mgflat_cave_width (Mapgen flat cave width) float 0.3
+
# Terrain noise threshold for lakes.
# Controls proportion of world area covered by lakes.
# Adjust towards 0.0 for a larger proportion.
[***Mapgen fractal]
+# Controls width of tunnels, a smaller value creates wider tunnels.
+mgfractal_cave_width (Mapgen fractal cave width) float 0.3
+
# Choice of 18 fractals from 9 formulas.
# 1 = 4D "Roundy" mandelbrot set.
# 2 = 4D "Roundy" julia set.
[****General]
# Map generation attributes specific to Mapgen Valleys.
+# 'altitude_chill' makes higher elevations colder, which may cause biome issues.
+# 'humid_rivers' modifies the humidity around rivers and in areas where water would tend to pool,
+# it may interfere with delicately adjusted biomes.
+# The default flags set in the engine are: altitude_chill, humid_rivers
+# The flags string modifies the engine defaults.
# Flags that are not specified in the flag string are not modified from the default.
-# Flags starting with "no" are used to explicitly disable them.
-# "altitude_chill" makes higher elevations colder, which may cause biome issues.
-# "humid_rivers" modifies the humidity around rivers and in areas where water would tend to pool. It may interfere with delicately adjusted biomes.
+# Flags starting with 'no' are used to explicitly disable them.
mg_valleys_spflags (Valleys C Flags) flags altitude_chill,humid_rivers altitude_chill,noaltitude_chill,humid_rivers,nohumid_rivers
# The altitude at which temperature drops by 20C
-mg_valleys_altitude_chill (Altitude Chill) int 90
+mgvalleys_altitude_chill (Altitude Chill) int 90
# Depth below which you'll find large caves.
-mg_valleys_large_cave_depth (Large cave depth) int -33
+mgvalleys_large_cave_depth (Large cave depth) int -33
# Creates unpredictable lava features in caves.
# These can make mining difficult. Zero disables them. (0-10)
-mg_valleys_lava_features (Lava Features) int 0
+mgvalleys_lava_features (Lava Features) int 0
# Depth below which you'll find massive caves.
-mg_valleys_massive_cave_depth (Massive cave depth) int -256
+mgvalleys_massive_cave_depth (Massive cave depth) int -256
# How deep to make rivers
-mg_valleys_river_depth (River Depth) int 4
+mgvalleys_river_depth (River Depth) int 4
# How wide to make rivers
-mg_valleys_river_size (River Size) int 5
+mgvalleys_river_size (River Size) int 5
# Creates unpredictable water features in caves.
# These can make mining difficult. Zero disables them. (0-10)
-mg_valleys_water_features (Water Features) int 0
+mgvalleys_water_features (Water Features) int 0
+
+# Controls width of tunnels, a smaller value creates wider tunnels.
+mgvalleys_cave_width (Cave width) float 0.3
# Noise parameters
[****Noises]
# Caves and tunnels form at the intersection of the two noises
-mg_valleys_np_cave1 (Cave noise #1) noise_params 0, 12, (100, 100, 100), 52534, 4, 0.5, 2.0
+mgvalleys_np_cave1 (Cave noise #1) noise_params 0, 12, (100, 100, 100), 52534, 4, 0.5, 2.0
# Caves and tunnels form at the intersection of the two noises
-mg_valleys_np_cave2 (Cave noise #2) noise_params 0, 12, (100, 100, 100), 10325, 4, 0.5, 2.0
+mgvalleys_np_cave2 (Cave noise #2) noise_params 0, 12, (100, 100, 100), 10325, 4, 0.5, 2.0
# The depth of dirt or other filler
-mg_valleys_np_filler_depth (Filler Depth) noise_params 0, 1.2, (256, 256, 256), 1605, 3, 0.5, 2.0
+mgvalleys_np_filler_depth (Filler Depth) noise_params 0, 1.2, (256, 256, 256), 1605, 3, 0.5, 2.0
# Massive caves form here.
-mg_valleys_np_massive_caves (Massive cave noise) noise_params 0, 1, (768, 256, 768), 59033, 6, 0.63, 2.0
+mgvalleys_np_massive_caves (Massive cave noise) noise_params 0, 1, (768, 256, 768), 59033, 6, 0.63, 2.0
# River noise -- rivers occur close to zero
-mg_valleys_np_rivers (River Noise) noise_params 0, 1, (256, 256, 256), -6050, 5, 0.6, 2.0
+mgvalleys_np_rivers (River Noise) noise_params 0, 1, (256, 256, 256), -6050, 5, 0.6, 2.0
# Base terrain height
-mg_valleys_np_terrain_height (Terrain Height) noise_params -10, 50, (1024, 1024, 1024), 5202, 6, 0.4, 2.0
+mgvalleys_np_terrain_height (Terrain Height) noise_params -10, 50, (1024, 1024, 1024), 5202, 6, 0.4, 2.0
# Raises terrain to make valleys around the rivers
-mg_valleys_np_valley_depth (Valley Depth) noise_params 5, 4, (512, 512, 512), -1914, 1, 1.0, 2.0
+mgvalleys_np_valley_depth (Valley Depth) noise_params 5, 4, (512, 512, 512), -1914, 1, 1.0, 2.0
# Slope and fill work together to modify the heights
-mg_valleys_np_inter_valley_fill (Valley Fill) noise_params 0, 1, (256, 512, 256), 1993, 6, 0.8, 2.0
+mgvalleys_np_inter_valley_fill (Valley Fill) noise_params 0, 1, (256, 512, 256), 1993, 6, 0.8, 2.0
# Amplifies the valleys
-mg_valleys_np_valley_profile (Valley Profile) noise_params 0.6, 0.5, (512, 512, 512), 777, 1, 1.0, 2.0
+mgvalleys_np_valley_profile (Valley Profile) noise_params 0.6, 0.5, (512, 512, 512), 777, 1, 1.0, 2.0
# Slope and fill work together to modify the heights
-mg_valleys_np_inter_valley_slope (Valley Slope) noise_params 0.5, 0.5, (128, 128, 128), 746, 1, 1.0, 2.0
+mgvalleys_np_inter_valley_slope (Valley Slope) noise_params 0.5, 0.5, (128, 128, 128), 746, 1, 1.0, 2.0
[*Security]