config ROCKCHIP_RK3036
bool "Support Rockchip RK3036"
- select CPU_V7
+ select CPU_V7A
select SUPPORT_SPL
select SPL
+ imply USB_FUNCTION_ROCKUSB
+ imply CMD_ROCKUSB
help
The Rockchip RK3036 is a ARM-based SoC with a dual-core Cortex-A7
including NEON and GPU, Mali-400 graphics, several DDR3 options
and video codec support. Peripherals include Gigabit Ethernet,
USB2 host and OTG, SDIO, I2S, UART, SPI, I2C and PWMs.
+config ROCKCHIP_RK3128
+ bool "Support Rockchip RK3128"
+ select CPU_V7A
+ help
+ The Rockchip RK3128 is a ARM-based SoC with a quad-core Cortex-A7
+ including NEON and GPU, Mali-400 graphics, several DDR3 options
+ and video codec support. Peripherals include Gigabit Ethernet,
+ USB2 host and OTG, SDIO, I2S, UART, SPI, I2C and PWMs.
+
config ROCKCHIP_RK3188
bool "Support Rockchip RK3188"
- select CPU_V7
+ select CPU_V7A
select SPL_BOARD_INIT if SPL
select SUPPORT_SPL
select SPL
select SPL_CLK
- select SPL_PINCTRL
select SPL_REGMAP
select SPL_SYSCON
select SPL_RAM
config ROCKCHIP_RK322X
bool "Support Rockchip RK3228/RK3229"
- select CPU_V7
+ select CPU_V7A
select SUPPORT_SPL
select SPL
select ROCKCHIP_BROM_HELPER
- select DEBUG_UART_BOARD_INIT
help
The Rockchip RK3229 is a ARM-based SoC with a dual-core Cortex-A7
including NEON and GPU, Mali-400 graphics, several DDR3 options
config ROCKCHIP_RK3288
bool "Support Rockchip RK3288"
- select CPU_V7
+ select CPU_V7A
select SPL_BOARD_INIT if SPL
select SUPPORT_SPL
select SPL
+ imply USB_FUNCTION_ROCKUSB
+ imply CMD_ROCKUSB
help
The Rockchip RK3288 is a ARM-based SoC with a quad-core Cortex-A17
including NEON and GPU, 1MB L2 cache, Mali-T7 graphics, two
and video codec support. Peripherals include Gigabit Ethernet,
USB2 host and OTG, SDIO, I2S, UARTs, SPI, I2C and PWMs.
+if ROCKCHIP_RK3288
+
+config TPL_TEXT_BASE
+ default 0xff704000
+
+config TPL_MAX_SIZE
+ default 32768
+
+endif
+
config ROCKCHIP_RK3328
bool "Support Rockchip RK3328"
select ARM64
imply SPL_SEPARATE_BSS
imply SPL_SERIAL_SUPPORT
imply TPL_SERIAL_SUPPORT
- select DEBUG_UART_BOARD_INIT
- select SYS_NS16550
help
The Rockchip RK3368 is a ARM-based SoC with a octa-core (organised
into a big and little cluster with 4 cores each) Cortex-A53 including
if ROCKCHIP_RK3368
-config TPL_LDSCRIPT
- default "arch/arm/mach-rockchip/rk3368/u-boot-tpl.lds"
-
config TPL_TEXT_BASE
default 0xff8c1000
select SPL_SEPARATE_BSS
select SPL_SERIAL_SUPPORT
select SPL_DRIVERS_MISC_SUPPORT
- select DEBUG_UART_BOARD_INIT
select BOARD_LATE_INIT
select ROCKCHIP_BROM_HELPER
help
config ROCKCHIP_RV1108
bool "Support Rockchip RV1108"
- select CPU_V7
+ select CPU_V7A
help
The Rockchip RV1108 is a ARM-based SoC with a single-core Cortex-A7
and a DSP.
+config ROCKCHIP_USB_UART
+ bool "Route uart output to usb pins"
+ help
+ Rockchip SoCs have the ability to route the signals of the debug
+ uart through the d+ and d- pins of a specific usb phy to enable
+ some form of closed-case debugging. With this option supported
+ SoCs will enable this routing as a debug measure.
+
config SPL_ROCKCHIP_BACK_TO_BROM
bool "SPL returns to bootrom"
default y if ROCKCHIP_RK3036
default 0x10300580 if ROCKCHIP_RV1108
default 0
help
- The Soc will enter to different boot mode(defined in asm/arch/boot_mode.h)
+ The Soc will enter to different boot mode(defined in asm/arch-rockchip/boot_mode.h)
according to the value from this register.
config ROCKCHIP_SPL_RESERVE_IRAM
hex "Size of IRAM reserved in SPL"
- default 0x4000
+ default 0
help
SPL may need reserve memory for firmware loaded by SPL, whose load
address is in IRAM and may overlay with SPL text area if not
default y if !SPL_ROCKCHIP_BACK_TO_BROM
source "arch/arm/mach-rockchip/rk3036/Kconfig"
+source "arch/arm/mach-rockchip/rk3128/Kconfig"
source "arch/arm/mach-rockchip/rk3188/Kconfig"
source "arch/arm/mach-rockchip/rk322x/Kconfig"
source "arch/arm/mach-rockchip/rk3288/Kconfig"