BTicino Mamoj board:
===================

Build:

 $ make mrproper
 $ make imx6dl_mamoj_defconfig
 $ make

   This will generate the SPL image called SPL and the u-boot-dtb.img.

The following methods can be used for booting Mamoj boards:

1. USB SDP boot

1. USB SDP boot:
---------------

 - Build imx_usb_loader

    $ git clone git://github.com/boundarydevices/imx_usb_loader.git
    $ cd imx_usb_loader
    $ make

 - Build the BSP and copy SPL, u-boot-dtb.img in imx_usb_loader directory

 - Put the board in "Serial Download Mode"

 - Plug-in USB-to-Serial, Open minicom 1152008N1 and USB OTG cables to Host

 - Turn-on board

 - Identify VID/PID using lsusb

    Bus 001 Device 010: ID 15a2:0061 Freescale Semiconductor, Inc. i.MX 6Solo/6DualLite SystemOnChip in RecoveryMode

 - Update the conf files

    imx_usb.conf
      0x15a2:0x0061, mx6_usb_rom.conf, 0x0525:0xb4a4, mx6_usb_sdp_spl.conf

    mx6_usb_rom.conf
      mx6_usb
      hid,1024,0x910000,0x10000000,512M,0x00900000,0x40000
      SPL:jump header2

    mx6_usb_sdp_spl.conf
      mx6_spl_sdp
      hid,uboot_header,1024,0x910000,0x10000000,512M,0x00900000,0x40000
      u-boot-dtb.img:jump header2

  - Launch the loader

     $ ./imx_usb

  We can see U-Boot boot from USB SDP on minicom

--
Jagan Teki <jagan@amarulasolutions.com>
03/12/18