git.librecmc.org Git - oweals/openwrt.git/blob

   1 From 71bd508d7ded8c504ef05d1b4befecfe25e54cb1 Mon Sep 17 00:00:00 2001
   2 From: Ian Molton <ian@mnementh.co.uk>
   3 Date: Fri, 8 Dec 2017 13:10:29 +0100
   4 Subject: [PATCH] brcmfmac: Rename / replace old IO functions with simpler
   5  ones.
   6
   7 Primarily this patch removes:
   8
   9 brcmf_sdiod_f0_writeb()
  10 brcmf_sdiod_reg_write()
  11 brcmf_sdiod_reg_read()
  12
  13 Since we no longer use the quirky method of deciding which function to
  14 address via the address being accessed, take the opportunity to rename
  15 some IO functions more in line with common kernel code. We also convert
  16 those that map directly to sdio_{read,write}*() to macros.
  17
  18 Signed-off-by: Ian Molton <ian@mnementh.co.uk>
  19 Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
  20 Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
  21 Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
  22 ---
  23  .../wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c  | 169 +++----------------
  24  .../wireless/broadcom/brcm80211/brcmfmac/sdio.c    | 186 ++++++++++-----------
  25  .../wireless/broadcom/brcm80211/brcmfmac/sdio.h    |  28 +++-
  26  3 files changed, 138 insertions(+), 245 deletions(-)
  27
  28 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
  29 +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
  30 @@ -137,27 +137,27 @@ int brcmf_sdiod_intr_register(struct brc
  31                 if (sdiodev->bus_if->chip == BRCM_CC_43362_CHIP_ID) {
  32                         /* assign GPIO to SDIO core */
  33                         addr = CORE_CC_REG(SI_ENUM_BASE, gpiocontrol);
  34 -                       gpiocontrol = brcmf_sdiod_regrl(sdiodev, addr, &ret);
  35 +                       gpiocontrol = brcmf_sdiod_readl(sdiodev, addr, &ret);
  36                         gpiocontrol |= 0x2;
  37 -                       brcmf_sdiod_regwl(sdiodev, addr, gpiocontrol, &ret);
  38 +                       brcmf_sdiod_writel(sdiodev, addr, gpiocontrol, &ret);
  39
  40 -                       brcmf_sdiod_regwb(sdiodev, SBSDIO_GPIO_SELECT, 0xf,
  41 -                                         &ret);
  42 -                       brcmf_sdiod_regwb(sdiodev, SBSDIO_GPIO_OUT, 0, &ret);
  43 -                       brcmf_sdiod_regwb(sdiodev, SBSDIO_GPIO_EN, 0x2, &ret);
  44 +                       brcmf_sdiod_writeb(sdiodev, SBSDIO_GPIO_SELECT,
  45 +                                          0xf, &ret);
  46 +                       brcmf_sdiod_writeb(sdiodev, SBSDIO_GPIO_OUT, 0, &ret);
  47 +                       brcmf_sdiod_writeb(sdiodev, SBSDIO_GPIO_EN, 0x2, &ret);
  48                 }
  49
  50                 /* must configure SDIO_CCCR_IENx to enable irq */
  51 -               data = brcmf_sdiod_regrb(sdiodev, SDIO_CCCR_IENx, &ret);
  52 +               data = brcmf_sdiod_func0_rb(sdiodev, SDIO_CCCR_IENx, &ret);
  53                 data |= 1 << SDIO_FUNC_1 | 1 << SDIO_FUNC_2 | 1;
  54 -               brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_IENx, data, &ret);
  55 +               brcmf_sdiod_func0_wb(sdiodev, SDIO_CCCR_IENx, data, &ret);
  56
  57                 /* redirect, configure and enable io for interrupt signal */
  58                 data = SDIO_SEPINT_MASK | SDIO_SEPINT_OE;
  59                 if (pdata->oob_irq_flags & IRQF_TRIGGER_HIGH)
  60                         data |= SDIO_SEPINT_ACT_HI;
  61 -               brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, data, &ret);
  62 -
  63 +               brcmf_sdiod_func0_wb(sdiodev, SDIO_CCCR_BRCM_SEPINT,
  64 +                                    data, &ret);
  65                 sdio_release_host(sdiodev->func[1]);
  66         } else {
  67                 brcmf_dbg(SDIO, "Entering\n");
  68 @@ -183,8 +183,8 @@ void brcmf_sdiod_intr_unregister(struct
  69
  70                 pdata = &sdiodev->settings->bus.sdio;
  71                 sdio_claim_host(sdiodev->func[1]);
  72 -               brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, 0, NULL);
  73 -               brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_IENx, 0, NULL);
  74 +               brcmf_sdiod_func0_wb(sdiodev, SDIO_CCCR_BRCM_SEPINT, 0, NULL);
  75 +               brcmf_sdiod_func0_wb(sdiodev, SDIO_CCCR_IENx, 0, NULL);
  76                 sdio_release_host(sdiodev->func[1]);
  77
  78                 sdiodev->oob_irq_requested = false;
  79 @@ -242,8 +242,8 @@ static int brcmf_sdiod_set_sbaddr_window
  80         addr = (address & SBSDIO_SBWINDOW_MASK) >> 8;
  81
  82         for (i = 0 ; i < 3 && !err ; i++, addr >>= 8)
  83 -               brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_SBADDRLOW + i,
  84 -                                 addr & 0xff, &err);
  85 +               brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_SBADDRLOW + i,
  86 +                                  addr & 0xff, &err);
  87
  88         return err;
  89  }
  90 @@ -267,124 +267,15 @@ static int brcmf_sdiod_addrprep(struct b
  91         return 0;
  92  }
  93
  94 -static inline int brcmf_sdiod_f0_writeb(struct sdio_func *func, u8 byte,
  95 -                                       uint regaddr)
  96 -{
  97 -       int err_ret;
  98 -
  99 -       /*
 100 -        * Can only directly write to some F0 registers.
 101 -        * Handle CCCR_IENx and CCCR_ABORT command
 102 -        * as a special case.
 103 -        */
 104 -       if ((regaddr == SDIO_CCCR_ABORT) ||
 105 -           (regaddr == SDIO_CCCR_IENx))
 106 -               sdio_writeb(func, byte, regaddr, &err_ret);
 107 -       else
 108 -               sdio_f0_writeb(func, byte, regaddr, &err_ret);
 109 -
 110 -       return err_ret;
 111 -}
 112 -
 113 -static int brcmf_sdiod_reg_write(struct brcmf_sdio_dev *sdiodev, u32 addr,
 114 -                                u8 regsz, void *data)
 115 -{
 116 -       int ret;
 117 -
 118 -       /*
 119 -        * figure out how to read the register based on address range
 120 -        * 0x00 ~ 0x7FF: function 0 CCCR and FBR
 121 -        * 0x10000 ~ 0x1FFFF: function 1 miscellaneous registers
 122 -        * The rest: function 1 silicon backplane core registers
 123 -        * f0 writes must be bytewise
 124 -        */
 125 -
 126 -       if ((addr & ~REG_F0_REG_MASK) == 0) {
 127 -               if (WARN_ON(regsz > 1))
 128 -                       return -EINVAL;
 129 -               ret = brcmf_sdiod_f0_writeb(sdiodev->func[0],
 130 -                                           *(u8 *)data, addr);
 131 -       } else {
 132 -               switch (regsz) {
 133 -               case 1:
 134 -                       sdio_writeb(sdiodev->func[1], *(u8 *)data, addr, &ret);
 135 -                       break;
 136 -               case 4:
 137 -                       ret = brcmf_sdiod_addrprep(sdiodev, &addr);
 138 -                       if (ret)
 139 -                               goto done;
 140 -
 141 -                       sdio_writel(sdiodev->func[1], *(u32 *)data, addr, &ret);
 142 -                       break;
 143 -               default:
 144 -                       WARN(1, "Invalid reg size\n");
 145 -                       ret = -EINVAL;
 146 -                       break;
 147 -               }
 148 -       }
 149 -
 150 -done:
 151 -       return ret;
 152 -}
 153 -
 154 -static int brcmf_sdiod_reg_read(struct brcmf_sdio_dev *sdiodev, u32 addr,
 155 -                               u8 regsz, void *data)
 156 -{
 157 -       int ret;
 158 -
 159 -       /*
 160 -        * figure out how to read the register based on address range
 161 -        * 0x00 ~ 0x7FF: function 0 CCCR and FBR
 162 -        * 0x10000 ~ 0x1FFFF: function 1 miscellaneous registers
 163 -        * The rest: function 1 silicon backplane core registers
 164 -        * f0 reads must be bytewise
 165 -        */
 166 -       if ((addr & ~REG_F0_REG_MASK) == 0) {
 167 -               if (WARN_ON(regsz > 1))
 168 -                       return -EINVAL;
 169 -               *(u8 *)data = sdio_f0_readb(sdiodev->func[0], addr, &ret);
 170 -       } else {
 171 -               switch (regsz) {
 172 -               case 1:
 173 -                       *(u8 *)data = sdio_readb(sdiodev->func[1], addr, &ret);
 174 -                       break;
 175 -               case 4:
 176 -                       ret = brcmf_sdiod_addrprep(sdiodev, &addr);
 177 -                       if (ret)
 178 -                               goto done;
 179 -
 180 -                       *(u32 *)data = sdio_readl(sdiodev->func[1], addr, &ret);
 181 -                       break;
 182 -               default:
 183 -                       WARN(1, "Invalid reg size\n");
 184 -                       ret = -EINVAL;
 185 -                       break;
 186 -               }
 187 -       }
 188 -
 189 -done:
 190 -       return ret;
 191 -}
 192 -
 193 -u8 brcmf_sdiod_regrb(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret)
 194 +u32 brcmf_sdiod_readl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret)
 195  {
 196 -       u8 data;
 197 +       u32 data = 0;
 198         int retval;
 199
 200 -       retval = brcmf_sdiod_reg_read(sdiodev, addr, 1, &data);
 201 -
 202 -       if (ret)
 203 -               *ret = retval;
 204 -
 205 -       return data;
 206 -}
 207 +       retval = brcmf_sdiod_addrprep(sdiodev, &addr);
 208
 209 -u32 brcmf_sdiod_regrl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret)
 210 -{
 211 -       u32 data;
 212 -       int retval;
 213 -
 214 -       retval = brcmf_sdiod_reg_read(sdiodev, addr, 4, &data);
 215 +       if (!retval)
 216 +               data = sdio_readl(sdiodev->func[1], addr, &retval);
 217
 218         if (ret)
 219                 *ret = retval;
 220 @@ -392,23 +283,15 @@ u32 brcmf_sdiod_regrl(struct brcmf_sdio_
 221         return data;
 222  }
 223
 224 -void brcmf_sdiod_regwb(struct brcmf_sdio_dev *sdiodev, u32 addr,
 225 -                     u8 data, int *ret)
 226 +void brcmf_sdiod_writel(struct brcmf_sdio_dev *sdiodev, u32 addr,
 227 +                       u32 data, int *ret)
 228  {
 229         int retval;
 230
 231 -       retval = brcmf_sdiod_reg_write(sdiodev, addr, 1, &data);
 232 -
 233 -       if (ret)
 234 -               *ret = retval;
 235 -}
 236 -
 237 -void brcmf_sdiod_regwl(struct brcmf_sdio_dev *sdiodev, u32 addr,
 238 -                     u32 data, int *ret)
 239 -{
 240 -       int retval;
 241 +       retval = brcmf_sdiod_addrprep(sdiodev, &addr);
 242
 243 -       retval = brcmf_sdiod_reg_write(sdiodev, addr, 4, &data);
 244 +       if (!retval)
 245 +               sdio_writel(sdiodev->func[1], data, addr, &retval);
 246
 247         if (ret)
 248                 *ret = retval;
 249 @@ -846,8 +729,8 @@ int brcmf_sdiod_abort(struct brcmf_sdio_
 250  {
 251         brcmf_dbg(SDIO, "Enter\n");
 252
 253 -       /* issue abort cmd52 command through F0 */
 254 -       brcmf_sdiod_reg_write(sdiodev, SDIO_CCCR_ABORT, 1, &fn);
 255 +       /* Issue abort cmd52 command through F0 */
 256 +       brcmf_sdiod_func0_wb(sdiodev, SDIO_CCCR_ABORT, fn, NULL);
 257
 258         brcmf_dbg(SDIO, "Exit\n");
 259         return 0;
 260 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
 261 +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
 262 @@ -669,7 +669,7 @@ static int r_sdreg32(struct brcmf_sdio *
 263         int ret;
 264
 265         core = brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV);
 266 -       *regvar = brcmf_sdiod_regrl(bus->sdiodev, core->base + offset, &ret);
 267 +       *regvar = brcmf_sdiod_readl(bus->sdiodev, core->base + offset, &ret);
 268
 269         return ret;
 270  }
 271 @@ -680,7 +680,7 @@ static int w_sdreg32(struct brcmf_sdio *
 272         int ret;
 273
 274         core = brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV);
 275 -       brcmf_sdiod_regwl(bus->sdiodev, core->base + reg_offset, regval, &ret);
 276 +       brcmf_sdiod_writel(bus->sdiodev, core->base + reg_offset, regval, &ret);
 277
 278         return ret;
 279  }
 280 @@ -697,8 +697,7 @@ brcmf_sdio_kso_control(struct brcmf_sdio
 281
 282         wr_val = (on << SBSDIO_FUNC1_SLEEPCSR_KSO_SHIFT);
 283         /* 1st KSO write goes to AOS wake up core if device is asleep  */
 284 -       brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR,
 285 -                         wr_val, &err);
 286 +       brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, wr_val, &err);
 287
 288         if (on) {
 289                 /* device WAKEUP through KSO:
 290 @@ -724,7 +723,7 @@ brcmf_sdio_kso_control(struct brcmf_sdio
 291                  * just one write attempt may fail,
 292                  * read it back until it matches written value
 293                  */
 294 -               rd_val = brcmf_sdiod_regrb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR,
 295 +               rd_val = brcmf_sdiod_readb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR,
 296                                            &err);
 297                 if (!err) {
 298                         if ((rd_val & bmask) == cmp_val)
 299 @@ -734,9 +733,11 @@ brcmf_sdio_kso_control(struct brcmf_sdio
 300                 /* bail out upon subsequent access errors */
 301                 if (err && (err_cnt++ > BRCMF_SDIO_MAX_ACCESS_ERRORS))
 302                         break;
 303 +
 304                 udelay(KSO_WAIT_US);
 305 -               brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR,
 306 -                                 wr_val, &err);
 307 +               brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, wr_val,
 308 +                                  &err);
 309 +
 310         } while (try_cnt++ < MAX_KSO_ATTEMPTS);
 311
 312         if (try_cnt > 2)
 313 @@ -772,15 +773,15 @@ static int brcmf_sdio_htclk(struct brcmf
 314                 clkreq =
 315                     bus->alp_only ? SBSDIO_ALP_AVAIL_REQ : SBSDIO_HT_AVAIL_REQ;
 316
 317 -               brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
 318 -                                 clkreq, &err);
 319 +               brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
 320 +                                  clkreq, &err);
 321                 if (err) {
 322                         brcmf_err("HT Avail request error: %d\n", err);
 323                         return -EBADE;
 324                 }
 325
 326                 /* Check current status */
 327 -               clkctl = brcmf_sdiod_regrb(bus->sdiodev,
 328 +               clkctl = brcmf_sdiod_readb(bus->sdiodev,
 329                                            SBSDIO_FUNC1_CHIPCLKCSR, &err);
 330                 if (err) {
 331                         brcmf_err("HT Avail read error: %d\n", err);
 332 @@ -790,35 +791,34 @@ static int brcmf_sdio_htclk(struct brcmf
 333                 /* Go to pending and await interrupt if appropriate */
 334                 if (!SBSDIO_CLKAV(clkctl, bus->alp_only) && pendok) {
 335                         /* Allow only clock-available interrupt */
 336 -                       devctl = brcmf_sdiod_regrb(bus->sdiodev,
 337 +                       devctl = brcmf_sdiod_readb(bus->sdiodev,
 338                                                    SBSDIO_DEVICE_CTL, &err);
 339                         if (err) {
 340 -                               brcmf_err("Devctl error setting CA: %d\n",
 341 -                                         err);
 342 +                               brcmf_err("Devctl error setting CA: %d\n", err);
 343                                 return -EBADE;
 344                         }
 345
 346                         devctl |= SBSDIO_DEVCTL_CA_INT_ONLY;
 347 -                       brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL,
 348 -                                         devctl, &err);
 349 +                       brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_DEVICE_CTL,
 350 +                                          devctl, &err);
 351                         brcmf_dbg(SDIO, "CLKCTL: set PENDING\n");
 352                         bus->clkstate = CLK_PENDING;
 353
 354                         return 0;
 355                 } else if (bus->clkstate == CLK_PENDING) {
 356                         /* Cancel CA-only interrupt filter */
 357 -                       devctl = brcmf_sdiod_regrb(bus->sdiodev,
 358 +                       devctl = brcmf_sdiod_readb(bus->sdiodev,
 359                                                    SBSDIO_DEVICE_CTL, &err);
 360                         devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY;
 361 -                       brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL,
 362 -                                         devctl, &err);
 363 +                       brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_DEVICE_CTL,
 364 +                                          devctl, &err);
 365                 }
 366
 367                 /* Otherwise, wait here (polling) for HT Avail */
 368                 timeout = jiffies +
 369                           msecs_to_jiffies(PMU_MAX_TRANSITION_DLY/1000);
 370                 while (!SBSDIO_CLKAV(clkctl, bus->alp_only)) {
 371 -                       clkctl = brcmf_sdiod_regrb(bus->sdiodev,
 372 +                       clkctl = brcmf_sdiod_readb(bus->sdiodev,
 373                                                    SBSDIO_FUNC1_CHIPCLKCSR,
 374                                                    &err);
 375                         if (time_after(jiffies, timeout))
 376 @@ -852,16 +852,16 @@ static int brcmf_sdio_htclk(struct brcmf
 377
 378                 if (bus->clkstate == CLK_PENDING) {
 379                         /* Cancel CA-only interrupt filter */
 380 -                       devctl = brcmf_sdiod_regrb(bus->sdiodev,
 381 +                       devctl = brcmf_sdiod_readb(bus->sdiodev,
 382                                                    SBSDIO_DEVICE_CTL, &err);
 383                         devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY;
 384 -                       brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL,
 385 -                                         devctl, &err);
 386 +                       brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_DEVICE_CTL,
 387 +                                          devctl, &err);
 388                 }
 389
 390                 bus->clkstate = CLK_SDONLY;
 391 -               brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
 392 -                                 clkreq, &err);
 393 +               brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
 394 +                                  clkreq, &err);
 395                 brcmf_dbg(SDIO, "CLKCTL: turned OFF\n");
 396                 if (err) {
 397                         brcmf_err("Failed access turning clock off: %d\n",
 398 @@ -951,14 +951,14 @@ brcmf_sdio_bus_sleep(struct brcmf_sdio *
 399
 400                 /* Going to sleep */
 401                 if (sleep) {
 402 -                       clkcsr = brcmf_sdiod_regrb(bus->sdiodev,
 403 +                       clkcsr = brcmf_sdiod_readb(bus->sdiodev,
 404                                                    SBSDIO_FUNC1_CHIPCLKCSR,
 405                                                    &err);
 406                         if ((clkcsr & SBSDIO_CSR_MASK) == 0) {
 407                                 brcmf_dbg(SDIO, "no clock, set ALP\n");
 408 -                               brcmf_sdiod_regwb(bus->sdiodev,
 409 -                                                 SBSDIO_FUNC1_CHIPCLKCSR,
 410 -                                                 SBSDIO_ALP_AVAIL_REQ, &err);
 411 +                               brcmf_sdiod_writeb(bus->sdiodev,
 412 +                                                  SBSDIO_FUNC1_CHIPCLKCSR,
 413 +                                                  SBSDIO_ALP_AVAIL_REQ, &err);
 414                         }
 415                         err = brcmf_sdio_kso_control(bus, false);
 416                 } else {
 417 @@ -1178,16 +1178,16 @@ static void brcmf_sdio_rxfail(struct brc
 418         if (abort)
 419                 brcmf_sdiod_abort(bus->sdiodev, SDIO_FUNC_2);
 420
 421 -       brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL,
 422 -                         SFC_RF_TERM, &err);
 423 +       brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL, SFC_RF_TERM,
 424 +                          &err);
 425         bus->sdcnt.f1regdata++;
 426
 427         /* Wait until the packet has been flushed (device/FIFO stable) */
 428         for (lastrbc = retries = 0xffff; retries > 0; retries--) {
 429 -               hi = brcmf_sdiod_regrb(bus->sdiodev,
 430 -                                      SBSDIO_FUNC1_RFRAMEBCHI, &err);
 431 -               lo = brcmf_sdiod_regrb(bus->sdiodev,
 432 -                                      SBSDIO_FUNC1_RFRAMEBCLO, &err);
 433 +               hi = brcmf_sdiod_readb(bus->sdiodev, SBSDIO_FUNC1_RFRAMEBCHI,
 434 +                                      &err);
 435 +               lo = brcmf_sdiod_readb(bus->sdiodev, SBSDIO_FUNC1_RFRAMEBCLO,
 436 +                                      &err);
 437                 bus->sdcnt.f1regdata += 2;
 438
 439                 if ((hi == 0) && (lo == 0))
 440 @@ -1229,12 +1229,12 @@ static void brcmf_sdio_txfail(struct brc
 441         bus->sdcnt.tx_sderrs++;
 442
 443         brcmf_sdiod_abort(sdiodev, SDIO_FUNC_2);
 444 -       brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_FRAMECTRL, SFC_WF_TERM, NULL);
 445 +       brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_FRAMECTRL, SFC_WF_TERM, NULL);
 446         bus->sdcnt.f1regdata++;
 447
 448         for (i = 0; i < 3; i++) {
 449 -               hi = brcmf_sdiod_regrb(sdiodev, SBSDIO_FUNC1_WFRAMEBCHI, NULL);
 450 -               lo = brcmf_sdiod_regrb(sdiodev, SBSDIO_FUNC1_WFRAMEBCLO, NULL);
 451 +               hi = brcmf_sdiod_readb(sdiodev, SBSDIO_FUNC1_WFRAMEBCHI, NULL);
 452 +               lo = brcmf_sdiod_readb(sdiodev, SBSDIO_FUNC1_WFRAMEBCLO, NULL);
 453                 bus->sdcnt.f1regdata += 2;
 454                 if ((hi == 0) && (lo == 0))
 455                         break;
 456 @@ -2446,11 +2446,11 @@ static void brcmf_sdio_bus_stop(struct d
 457                 bus->hostintmask = 0;
 458
 459                 /* Force backplane clocks to assure F2 interrupt propagates */
 460 -               saveclk = brcmf_sdiod_regrb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
 461 +               saveclk = brcmf_sdiod_readb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
 462                                             &err);
 463                 if (!err)
 464 -                       brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
 465 -                                         (saveclk | SBSDIO_FORCE_HT), &err);
 466 +                       brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
 467 +                                          (saveclk | SBSDIO_FORCE_HT), &err);
 468                 if (err)
 469                         brcmf_err("Failed to force clock for F2: err %d\n",
 470                                   err);
 471 @@ -2509,7 +2509,7 @@ static int brcmf_sdio_intr_rstatus(struc
 472         buscore = brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV);
 473         addr = buscore->base + offsetof(struct sdpcmd_regs, intstatus);
 474
 475 -       val = brcmf_sdiod_regrl(bus->sdiodev, addr, &ret);
 476 +       val = brcmf_sdiod_readl(bus->sdiodev, addr, &ret);
 477         bus->sdcnt.f1regdata++;
 478         if (ret != 0)
 479                 return ret;
 480 @@ -2519,7 +2519,7 @@ static int brcmf_sdio_intr_rstatus(struc
 481
 482         /* Clear interrupts */
 483         if (val) {
 484 -               brcmf_sdiod_regwl(bus->sdiodev, addr, val, &ret);
 485 +               brcmf_sdiod_writel(bus->sdiodev, addr, val, &ret);
 486                 bus->sdcnt.f1regdata++;
 487                 atomic_or(val, &bus->intstatus);
 488         }
 489 @@ -2545,23 +2545,23 @@ static void brcmf_sdio_dpc(struct brcmf_
 490
 491  #ifdef DEBUG
 492                 /* Check for inconsistent device control */
 493 -               devctl = brcmf_sdiod_regrb(bus->sdiodev,
 494 -                                          SBSDIO_DEVICE_CTL, &err);
 495 +               devctl = brcmf_sdiod_readb(bus->sdiodev, SBSDIO_DEVICE_CTL,
 496 +                                          &err);
 497  #endif                         /* DEBUG */
 498
 499                 /* Read CSR, if clock on switch to AVAIL, else ignore */
 500 -               clkctl = brcmf_sdiod_regrb(bus->sdiodev,
 501 +               clkctl = brcmf_sdiod_readb(bus->sdiodev,
 502                                            SBSDIO_FUNC1_CHIPCLKCSR, &err);
 503
 504                 brcmf_dbg(SDIO, "DPC: PENDING, devctl 0x%02x clkctl 0x%02x\n",
 505                           devctl, clkctl);
 506
 507                 if (SBSDIO_HTAV(clkctl)) {
 508 -                       devctl = brcmf_sdiod_regrb(bus->sdiodev,
 509 +                       devctl = brcmf_sdiod_readb(bus->sdiodev,
 510                                                    SBSDIO_DEVICE_CTL, &err);
 511                         devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY;
 512 -                       brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL,
 513 -                                         devctl, &err);
 514 +                       brcmf_sdiod_writeb(bus->sdiodev,
 515 +                                          SBSDIO_DEVICE_CTL, devctl, &err);
 516                         bus->clkstate = CLK_AVAIL;
 517                 }
 518         }
 519 @@ -3347,31 +3347,31 @@ static void brcmf_sdio_sr_init(struct br
 520
 521         brcmf_dbg(TRACE, "Enter\n");
 522
 523 -       val = brcmf_sdiod_regrb(bus->sdiodev, SBSDIO_FUNC1_WAKEUPCTRL, &err);
 524 +       val = brcmf_sdiod_readb(bus->sdiodev, SBSDIO_FUNC1_WAKEUPCTRL, &err);
 525         if (err) {
 526                 brcmf_err("error reading SBSDIO_FUNC1_WAKEUPCTRL\n");
 527                 return;
 528         }
 529
 530         val |= 1 << SBSDIO_FUNC1_WCTRL_HTWAIT_SHIFT;
 531 -       brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_WAKEUPCTRL, val, &err);
 532 +       brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_WAKEUPCTRL, val, &err);
 533         if (err) {
 534                 brcmf_err("error writing SBSDIO_FUNC1_WAKEUPCTRL\n");
 535                 return;
 536         }
 537
 538         /* Add CMD14 Support */
 539 -       brcmf_sdiod_regwb(bus->sdiodev, SDIO_CCCR_BRCM_CARDCAP,
 540 -                         (SDIO_CCCR_BRCM_CARDCAP_CMD14_SUPPORT |
 541 -                          SDIO_CCCR_BRCM_CARDCAP_CMD14_EXT),
 542 -                         &err);
 543 +       brcmf_sdiod_func0_wb(bus->sdiodev, SDIO_CCCR_BRCM_CARDCAP,
 544 +                            (SDIO_CCCR_BRCM_CARDCAP_CMD14_SUPPORT |
 545 +                             SDIO_CCCR_BRCM_CARDCAP_CMD14_EXT),
 546 +                            &err);
 547         if (err) {
 548                 brcmf_err("error writing SDIO_CCCR_BRCM_CARDCAP\n");
 549                 return;
 550         }
 551
 552 -       brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
 553 -                         SBSDIO_FORCE_HT, &err);
 554 +       brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
 555 +                          SBSDIO_FORCE_HT, &err);
 556         if (err) {
 557                 brcmf_err("error writing SBSDIO_FUNC1_CHIPCLKCSR\n");
 558                 return;
 559 @@ -3394,7 +3394,7 @@ static int brcmf_sdio_kso_init(struct br
 560         if (brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV)->rev < 12)
 561                 return 0;
 562
 563 -       val = brcmf_sdiod_regrb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, &err);
 564 +       val = brcmf_sdiod_readb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, &err);
 565         if (err) {
 566                 brcmf_err("error reading SBSDIO_FUNC1_SLEEPCSR\n");
 567                 return err;
 568 @@ -3403,8 +3403,8 @@ static int brcmf_sdio_kso_init(struct br
 569         if (!(val & SBSDIO_FUNC1_SLEEPCSR_KSO_MASK)) {
 570                 val |= (SBSDIO_FUNC1_SLEEPCSR_KSO_EN <<
 571                         SBSDIO_FUNC1_SLEEPCSR_KSO_SHIFT);
 572 -               brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR,
 573 -                                 val, &err);
 574 +               brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR,
 575 +                                  val, &err);
 576                 if (err) {
 577                         brcmf_err("error writing SBSDIO_FUNC1_SLEEPCSR\n");
 578                         return err;
 579 @@ -3565,9 +3565,9 @@ static void brcmf_sdio_bus_watchdog(stru
 580                                 u8 devpend;
 581
 582                                 sdio_claim_host(bus->sdiodev->func[1]);
 583 -                               devpend = brcmf_sdiod_regrb(bus->sdiodev,
 584 -                                                           SDIO_CCCR_INTx,
 585 -                                                           NULL);
 586 +                               devpend = brcmf_sdiod_func0_rb(bus->sdiodev,
 587 +                                                              SDIO_CCCR_INTx,
 588 +                                                              NULL);
 589                                 sdio_release_host(bus->sdiodev->func[1]);
 590                                 intstatus = devpend & (INTR_STATUS_FUNC1 |
 591                                                        INTR_STATUS_FUNC2);
 592 @@ -3705,12 +3705,12 @@ brcmf_sdio_drivestrengthinit(struct brcm
 593                         }
 594                 }
 595                 addr = CORE_CC_REG(pmu->base, chipcontrol_addr);
 596 -               brcmf_sdiod_regwl(sdiodev, addr, 1, NULL);
 597 -               cc_data_temp = brcmf_sdiod_regrl(sdiodev, addr, NULL);
 598 +               brcmf_sdiod_writel(sdiodev, addr, 1, NULL);
 599 +               cc_data_temp = brcmf_sdiod_readl(sdiodev, addr, NULL);
 600                 cc_data_temp &= ~str_mask;
 601                 drivestrength_sel <<= str_shift;
 602                 cc_data_temp |= drivestrength_sel;
 603 -               brcmf_sdiod_regwl(sdiodev, addr, cc_data_temp, NULL);
 604 +               brcmf_sdiod_writel(sdiodev, addr, cc_data_temp, NULL);
 605
 606                 brcmf_dbg(INFO, "SDIO: %d mA (req=%d mA) drive strength selected, set to 0x%08x\n",
 607                           str_tab[i].strength, drivestrength, cc_data_temp);
 608 @@ -3725,7 +3725,7 @@ static int brcmf_sdio_buscoreprep(void *
 609
 610         /* Try forcing SDIO core to do ALPAvail request only */
 611         clkset = SBSDIO_FORCE_HW_CLKREQ_OFF | SBSDIO_ALP_AVAIL_REQ;
 612 -       brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err);
 613 +       brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err);
 614         if (err) {
 615                 brcmf_err("error writing for HT off\n");
 616                 return err;
 617 @@ -3733,8 +3733,7 @@ static int brcmf_sdio_buscoreprep(void *
 618
 619         /* If register supported, wait for ALPAvail and then force ALP */
 620         /* This may take up to 15 milliseconds */
 621 -       clkval = brcmf_sdiod_regrb(sdiodev,
 622 -                                  SBSDIO_FUNC1_CHIPCLKCSR, NULL);
 623 +       clkval = brcmf_sdiod_readb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, NULL);
 624
 625         if ((clkval & ~SBSDIO_AVBITS) != clkset) {
 626                 brcmf_err("ChipClkCSR access: wrote 0x%02x read 0x%02x\n",
 627 @@ -3742,10 +3741,11 @@ static int brcmf_sdio_buscoreprep(void *
 628                 return -EACCES;
 629         }
 630
 631 -       SPINWAIT(((clkval = brcmf_sdiod_regrb(sdiodev,
 632 -                                             SBSDIO_FUNC1_CHIPCLKCSR, NULL)),
 633 -                       !SBSDIO_ALPAV(clkval)),
 634 -                       PMU_MAX_TRANSITION_DLY);
 635 +       SPINWAIT(((clkval = brcmf_sdiod_readb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
 636 +                                             NULL)),
 637 +                !SBSDIO_ALPAV(clkval)),
 638 +                PMU_MAX_TRANSITION_DLY);
 639 +
 640         if (!SBSDIO_ALPAV(clkval)) {
 641                 brcmf_err("timeout on ALPAV wait, clkval 0x%02x\n",
 642                           clkval);
 643 @@ -3753,11 +3753,11 @@ static int brcmf_sdio_buscoreprep(void *
 644         }
 645
 646         clkset = SBSDIO_FORCE_HW_CLKREQ_OFF | SBSDIO_FORCE_ALP;
 647 -       brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err);
 648 +       brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err);
 649         udelay(65);
 650
 651         /* Also, disable the extra SDIO pull-ups */
 652 -       brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_SDIOPULLUP, 0, NULL);
 653 +       brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_SDIOPULLUP, 0, NULL);
 654
 655         return 0;
 656  }
 657 @@ -3772,7 +3772,7 @@ static void brcmf_sdio_buscore_activate(
 658         /* clear all interrupts */
 659         core = brcmf_chip_get_core(chip, BCMA_CORE_SDIO_DEV);
 660         reg_addr = core->base + offsetof(struct sdpcmd_regs, intstatus);
 661 -       brcmf_sdiod_regwl(sdiodev, reg_addr, 0xFFFFFFFF, NULL);
 662 +       brcmf_sdiod_writel(sdiodev, reg_addr, 0xFFFFFFFF, NULL);
 663
 664         if (rstvec)
 665                 /* Write reset vector to address 0 */
 666 @@ -3785,7 +3785,7 @@ static u32 brcmf_sdio_buscore_read32(voi
 667         struct brcmf_sdio_dev *sdiodev = ctx;
 668         u32 val, rev;
 669
 670 -       val = brcmf_sdiod_regrl(sdiodev, addr, NULL);
 671 +       val = brcmf_sdiod_readl(sdiodev, addr, NULL);
 672         if ((sdiodev->func[0]->device == SDIO_DEVICE_ID_BROADCOM_4335_4339 ||
 673              sdiodev->func[0]->device == SDIO_DEVICE_ID_BROADCOM_4339) &&
 674             addr == CORE_CC_REG(SI_ENUM_BASE, chipid)) {
 675 @@ -3802,7 +3802,7 @@ static void brcmf_sdio_buscore_write32(v
 676  {
 677         struct brcmf_sdio_dev *sdiodev = ctx;
 678
 679 -       brcmf_sdiod_regwl(sdiodev, addr, val, NULL);
 680 +       brcmf_sdiod_writel(sdiodev, addr, val, NULL);
 681  }
 682
 683  static const struct brcmf_buscore_ops brcmf_sdio_buscore_ops = {
 684 @@ -3826,18 +3826,18 @@ brcmf_sdio_probe_attach(struct brcmf_sdi
 685         sdio_claim_host(sdiodev->func[1]);
 686
 687         pr_debug("F1 signature read @0x18000000=0x%4x\n",
 688 -                brcmf_sdiod_regrl(sdiodev, SI_ENUM_BASE, NULL));
 689 +                brcmf_sdiod_readl(sdiodev, SI_ENUM_BASE, NULL));
 690
 691         /*
 692          * Force PLL off until brcmf_chip_attach()
 693          * programs PLL control regs
 694          */
 695
 696 -       brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
 697 -                         BRCMF_INIT_CLKCTL1, &err);
 698 +       brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, BRCMF_INIT_CLKCTL1,
 699 +                          &err);
 700         if (!err)
 701 -               clkctl = brcmf_sdiod_regrb(sdiodev,
 702 -                                          SBSDIO_FUNC1_CHIPCLKCSR, &err);
 703 +               clkctl = brcmf_sdiod_readb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
 704 +                                          &err);
 705
 706         if (err || ((clkctl & ~SBSDIO_AVBITS) != BRCMF_INIT_CLKCTL1)) {
 707                 brcmf_err("ChipClkCSR access: err %d wrote 0x%02x read 0x%02x\n",
 708 @@ -3897,25 +3897,25 @@ brcmf_sdio_probe_attach(struct brcmf_sdi
 709         brcmf_sdio_drivestrengthinit(sdiodev, bus->ci, drivestrength);
 710
 711         /* Set card control so an SDIO card reset does a WLAN backplane reset */
 712 -       reg_val = brcmf_sdiod_regrb(sdiodev, SDIO_CCCR_BRCM_CARDCTRL, &err);
 713 +       reg_val = brcmf_sdiod_func0_rb(sdiodev, SDIO_CCCR_BRCM_CARDCTRL, &err);
 714         if (err)
 715                 goto fail;
 716
 717         reg_val |= SDIO_CCCR_BRCM_CARDCTRL_WLANRESET;
 718
 719 -       brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_BRCM_CARDCTRL, reg_val, &err);
 720 +       brcmf_sdiod_func0_wb(sdiodev, SDIO_CCCR_BRCM_CARDCTRL, reg_val, &err);
 721         if (err)
 722                 goto fail;
 723
 724         /* set PMUControl so a backplane reset does PMU state reload */
 725         reg_addr = CORE_CC_REG(brcmf_chip_get_pmu(bus->ci)->base, pmucontrol);
 726 -       reg_val = brcmf_sdiod_regrl(sdiodev, reg_addr, &err);
 727 +       reg_val = brcmf_sdiod_readl(sdiodev, reg_addr, &err);
 728         if (err)
 729                 goto fail;
 730
 731         reg_val |= (BCMA_CC_PMU_CTL_RES_RELOAD << BCMA_CC_PMU_CTL_RES_SHIFT);
 732
 733 -       brcmf_sdiod_regwl(sdiodev, reg_addr, reg_val, &err);
 734 +       brcmf_sdiod_writel(sdiodev, reg_addr, reg_val, &err);
 735         if (err)
 736                 goto fail;
 737
 738 @@ -4055,10 +4055,10 @@ static void brcmf_sdio_firmware_callback
 739                 goto release;
 740
 741         /* Force clocks on backplane to be sure F2 interrupt propagates */
 742 -       saveclk = brcmf_sdiod_regrb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, &err);
 743 +       saveclk = brcmf_sdiod_readb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, &err);
 744         if (!err) {
 745 -               brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
 746 -                                 (saveclk | SBSDIO_FORCE_HT), &err);
 747 +               brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
 748 +                                  (saveclk | SBSDIO_FORCE_HT), &err);
 749         }
 750         if (err) {
 751                 brcmf_err("Failed to force clock for F2: err %d\n", err);
 752 @@ -4080,7 +4080,7 @@ static void brcmf_sdio_firmware_callback
 753                 w_sdreg32(bus, bus->hostintmask,
 754                           offsetof(struct sdpcmd_regs, hostintmask));
 755
 756 -               brcmf_sdiod_regwb(sdiodev, SBSDIO_WATERMARK, 8, &err);
 757 +               brcmf_sdiod_writeb(sdiodev, SBSDIO_WATERMARK, 8, &err);
 758         } else {
 759                 /* Disable F2 again */
 760                 sdio_disable_func(sdiodev->func[SDIO_FUNC_2]);
 761 @@ -4091,8 +4091,8 @@ static void brcmf_sdio_firmware_callback
 762                 brcmf_sdio_sr_init(bus);
 763         } else {
 764                 /* Restore previous clock setting */
 765 -               brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
 766 -                                 saveclk, &err);
 767 +               brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
 768 +                                  saveclk, &err);
 769         }
 770
 771         if (err == 0) {
 772 @@ -4225,7 +4225,7 @@ struct brcmf_sdio *brcmf_sdio_probe(stru
 773         bus->rxflow = false;
 774
 775         /* Done with backplane-dependent accesses, can drop clock... */
 776 -       brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, 0, NULL);
 777 +       brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, 0, NULL);
 778
 779         sdio_release_host(bus->sdiodev->func[1]);
 780
 781 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
 782 +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
 783 @@ -50,6 +50,7 @@
 784  #define SBSDIO_NUM_FUNCTION            3
 785
 786  /* function 0 vendor specific CCCR registers */
 787 +
 788  #define SDIO_CCCR_BRCM_CARDCAP                 0xf0
 789  #define SDIO_CCCR_BRCM_CARDCAP_CMD14_SUPPORT   0x02
 790  #define SDIO_CCCR_BRCM_CARDCAP_CMD14_EXT       0x04
 791 @@ -131,8 +132,6 @@
 792  /* with b15, maps to 32-bit SB access */
 793  #define SBSDIO_SB_ACCESS_2_4B_FLAG     0x08000
 794
 795 -/* valid bits in SBSDIO_FUNC1_SBADDRxxx regs */
 796 -
 797  /* Address bits from SBADDR regs */
 798  #define SBSDIO_SBWINDOW_MASK           0xffff8000
 799
 800 @@ -293,13 +292,24 @@ struct sdpcmd_regs {
 801  int brcmf_sdiod_intr_register(struct brcmf_sdio_dev *sdiodev);
 802  void brcmf_sdiod_intr_unregister(struct brcmf_sdio_dev *sdiodev);
 803
 804 -/* sdio device register access interface */
 805 -u8 brcmf_sdiod_regrb(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret);
 806 -u32 brcmf_sdiod_regrl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret);
 807 -void brcmf_sdiod_regwb(struct brcmf_sdio_dev *sdiodev, u32 addr, u8 data,
 808 -                      int *ret);
 809 -void brcmf_sdiod_regwl(struct brcmf_sdio_dev *sdiodev, u32 addr, u32 data,
 810 -                      int *ret);
 811 +/* SDIO device register access interface */
 812 +/* Accessors for SDIO Function 0 */
 813 +#define brcmf_sdiod_func0_rb(sdiodev, addr, r) \
 814 +       sdio_readb((sdiodev)->func[0], (addr), (r))
 815 +
 816 +#define brcmf_sdiod_func0_wb(sdiodev, addr, v, ret) \
 817 +       sdio_writeb((sdiodev)->func[0], (v), (addr), (ret))
 818 +
 819 +/* Accessors for SDIO Function 1 */
 820 +#define brcmf_sdiod_readb(sdiodev, addr, r) \
 821 +       sdio_readb((sdiodev)->func[1], (addr), (r))
 822 +
 823 +#define brcmf_sdiod_writeb(sdiodev, addr, v, ret) \
 824 +       sdio_writeb((sdiodev)->func[1], (v), (addr), (ret))
 825 +
 826 +u32 brcmf_sdiod_readl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret);
 827 +void brcmf_sdiod_writel(struct brcmf_sdio_dev *sdiodev, u32 addr, u32 data,
 828 +                       int *ret);
 829
 830  /* Buffer transfer to/from device (client) core via cmd53.
 831   *   fn:       function number