git.librecmc.org Git - oweals/openwrt.git/blob

   1 From ac66f1708e56da5463f0d5a88e03871deefa78f8 Mon Sep 17 00:00:00 2001
   2 From: Stefan Wahren <stefan.wahren@i2se.com>
   3 Date: Sun, 21 Oct 2018 18:40:07 +0200
   4 Subject: [PATCH 235/773] staging: bcm2835-camera: Provide more specific probe
   5  error messages
   6
   7 Currently there is only a catch-all info message which print the
   8 relevant error code without any context. So add more specific error
   9 messages in order to narrow down possible issues.
  10
  11 Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
  12 ---
  13  .../bcm2835-camera/bcm2835-camera.c           | 58 +++++++++++++------
  14  1 file changed, 39 insertions(+), 19 deletions(-)
  15
  16 --- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c
  17 +++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c
  18 @@ -1552,8 +1552,11 @@ static int mmal_init(struct bm2835_mmal_
  19         struct vchiq_mmal_component  *camera;
  20
  21         ret = vchiq_mmal_init(&dev->instance);
  22 -       if (ret < 0)
  23 +       if (ret < 0) {
  24 +               v4l2_err(&dev->v4l2_dev, "%s: vchiq mmal init failed %d\n",
  25 +                        __func__, ret);
  26                 return ret;
  27 +       }
  28
  29         /* get the camera component ready */
  30         ret = vchiq_mmal_component_init(dev->instance, "ril.camera",
  31 @@ -1562,7 +1565,9 @@ static int mmal_init(struct bm2835_mmal_
  32                 goto unreg_mmal;
  33
  34         camera = dev->component[MMAL_COMPONENT_CAMERA];
  35 -       if (camera->outputs <  MMAL_CAMERA_PORT_COUNT) {
  36 +       if (camera->outputs < MMAL_CAMERA_PORT_COUNT) {
  37 +               v4l2_err(&dev->v4l2_dev, "%s: too few camera outputs %d needed %d\n",
  38 +                        __func__, camera->outputs, MMAL_CAMERA_PORT_COUNT);
  39                 ret = -EINVAL;
  40                 goto unreg_camera;
  41         }
  42 @@ -1570,8 +1575,11 @@ static int mmal_init(struct bm2835_mmal_
  43         ret = set_camera_parameters(dev->instance,
  44                                     camera,
  45                                     dev);
  46 -       if (ret < 0)
  47 +       if (ret < 0) {
  48 +               v4l2_err(&dev->v4l2_dev, "%s: unable to set camera parameters: %d\n",
  49 +                        __func__, ret);
  50                 goto unreg_camera;
  51 +       }
  52
  53         /* There was an error in the firmware that meant the camera component
  54          * produced BGR instead of RGB.
  55 @@ -1660,8 +1668,8 @@ static int mmal_init(struct bm2835_mmal_
  56
  57         if (dev->component[MMAL_COMPONENT_PREVIEW]->inputs < 1) {
  58                 ret = -EINVAL;
  59 -               pr_debug("too few input ports %d needed %d\n",
  60 -                        dev->component[MMAL_COMPONENT_PREVIEW]->inputs, 1);
  61 +               v4l2_err(&dev->v4l2_dev, "%s: too few input ports %d needed %d\n",
  62 +                        __func__, dev->component[MMAL_COMPONENT_PREVIEW]->inputs, 1);
  63                 goto unreg_preview;
  64         }
  65
  66 @@ -1674,8 +1682,8 @@ static int mmal_init(struct bm2835_mmal_
  67
  68         if (dev->component[MMAL_COMPONENT_IMAGE_ENCODE]->inputs < 1) {
  69                 ret = -EINVAL;
  70 -               v4l2_err(&dev->v4l2_dev, "too few input ports %d needed %d\n",
  71 -                        dev->component[MMAL_COMPONENT_IMAGE_ENCODE]->inputs,
  72 +               v4l2_err(&dev->v4l2_dev, "%s: too few input ports %d needed %d\n",
  73 +                        __func__, dev->component[MMAL_COMPONENT_IMAGE_ENCODE]->inputs,
  74                          1);
  75                 goto unreg_image_encoder;
  76         }
  77 @@ -1689,8 +1697,8 @@ static int mmal_init(struct bm2835_mmal_
  78
  79         if (dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->inputs < 1) {
  80                 ret = -EINVAL;
  81 -               v4l2_err(&dev->v4l2_dev, "too few input ports %d needed %d\n",
  82 -                        dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->inputs,
  83 +               v4l2_err(&dev->v4l2_dev, "%s: too few input ports %d needed %d\n",
  84 +                        __func__, dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->inputs,
  85                          1);
  86                 goto unreg_vid_encoder;
  87         }
  88 @@ -1719,8 +1727,11 @@ static int mmal_init(struct bm2835_mmal_
  89                                               sizeof(enable));
  90         }
  91         ret = bm2835_mmal_set_all_camera_controls(dev);
  92 -       if (ret < 0)
  93 +       if (ret < 0) {
  94 +               v4l2_err(&dev->v4l2_dev, "%s: failed to set all camera controls: %d\n",
  95 +                        __func__, ret);
  96                 goto unreg_vid_encoder;
  97 +       }
  98
  99         return 0;
 100
 101 @@ -1880,21 +1891,29 @@ static int bcm2835_mmal_probe(struct pla
 102                 snprintf(dev->v4l2_dev.name, sizeof(dev->v4l2_dev.name),
 103                          "%s", BM2835_MMAL_MODULE_NAME);
 104                 ret = v4l2_device_register(NULL, &dev->v4l2_dev);
 105 -               if (ret)
 106 +               if (ret) {
 107 +                       dev_err(&pdev->dev, "%s: could not register V4L2 device: %d\n",
 108 +                               __func__, ret);
 109                         goto free_dev;
 110 +               }
 111
 112                 /* setup v4l controls */
 113                 ret = bm2835_mmal_init_controls(dev, &dev->ctrl_handler);
 114 -               if (ret < 0)
 115 +               if (ret < 0) {
 116 +                       v4l2_err(&dev->v4l2_dev, "%s: could not init controls: %d\n",
 117 +                               __func__, ret);
 118                         goto unreg_dev;
 119 +               }
 120                 dev->v4l2_dev.ctrl_handler = &dev->ctrl_handler;
 121
 122                 /* mmal init */
 123                 dev->instance = instance;
 124                 ret = mmal_init(dev);
 125 -               if (ret < 0)
 126 +               if (ret < 0) {
 127 +                       v4l2_err(&dev->v4l2_dev, "%s: mmal init failed: %d\n",
 128 +                               __func__, ret);
 129                         goto unreg_dev;
 130 -
 131 +               }
 132                 /* initialize queue */
 133                 q = &dev->capture.vb_vidq;
 134                 memset(q, 0, sizeof(*q));
 135 @@ -1912,16 +1931,19 @@ static int bcm2835_mmal_probe(struct pla
 136
 137                 /* initialise video devices */
 138                 ret = bm2835_mmal_init_device(dev, &dev->vdev);
 139 -               if (ret < 0)
 140 +               if (ret < 0) {
 141 +                       v4l2_err(&dev->v4l2_dev, "%s: could not init device: %d\n",
 142 +                               __func__, ret);
 143                         goto unreg_dev;
 144 +               }
 145
 146                 /* Really want to call vidioc_s_fmt_vid_cap with the default
 147                  * format, but currently the APIs don't join up.
 148                  */
 149                 ret = mmal_setup_components(dev, &default_v4l2_format);
 150                 if (ret < 0) {
 151 -                       v4l2_err(&dev->v4l2_dev,
 152 -                                "%s: could not setup components\n", __func__);
 153 +                       v4l2_err(&dev->v4l2_dev, "%s: could not setup components: %d\n",
 154 +                               __func__, ret);
 155                         goto unreg_dev;
 156                 }
 157
 158 @@ -1945,8 +1967,6 @@ cleanup_gdev:
 159                 bcm2835_cleanup_instance(gdev[i]);
 160                 gdev[i] = NULL;
 161         }
 162 -       pr_info("%s: error %d while loading driver\n",
 163 -               BM2835_MMAL_MODULE_NAME, ret);
 164
 165         return ret;
 166  }