1 From 903af89ac9a9b82b6e736ab04e3848672a0ab364 Mon Sep 17 00:00:00 2001
2 From: Jonathan Bell <jonathan@raspberrypi.org>
3 Date: Tue, 11 Jun 2019 11:33:39 +0100
4 Subject: [PATCH] xhci: implement xhci_fixup_endpoint for interval
7 Must be called in a non-atomic context, after the endpoint
8 has been registered with the hardware via xhci_add_endpoint
9 and before the first URB is submitted for the endpoint.
11 Signed-off-by: Jonathan Bell <jonathan@raspberrypi.org>
13 drivers/usb/host/xhci.c | 98 +++++++++++++++++++++++++++++++++++++++++
14 1 file changed, 98 insertions(+)
16 --- a/drivers/usb/host/xhci.c
17 +++ b/drivers/usb/host/xhci.c
18 @@ -1427,6 +1427,103 @@ command_cleanup:
22 + * RPI: Fixup endpoint intervals when requested
23 + * - Check interval versus the (cached) endpoint context
24 + * - set the endpoint interval to the new value
25 + * - force an endpoint configure command
26 + * XXX: bandwidth is not recalculated. We should probably do that.
28 +static void xhci_fixup_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
29 + struct usb_host_endpoint *ep, int interval)
31 + struct xhci_hcd *xhci;
32 + struct xhci_ep_ctx *ep_ctx_out, *ep_ctx_in;
33 + struct xhci_command *command;
34 + struct xhci_input_control_ctx *ctrl_ctx;
35 + struct xhci_virt_device *vdev;
39 + unsigned long flags;
42 + xhci = hcd_to_xhci(hcd);
43 + ep_index = xhci_get_endpoint_index(&ep->desc);
45 + /* FS/LS interval translations */
46 + if ((udev->speed == USB_SPEED_FULL ||
47 + udev->speed == USB_SPEED_LOW))
50 + mutex_lock(&xhci->mutex);
52 + spin_lock_irqsave(&xhci->lock, flags);
54 + vdev = xhci->devs[udev->slot_id];
55 + /* Get context-derived endpoint interval */
56 + ep_ctx_out = xhci_get_ep_ctx(xhci, vdev->out_ctx, ep_index);
57 + ep_ctx_in = xhci_get_ep_ctx(xhci, vdev->in_ctx, ep_index);
58 + xhci_interval = EP_INTERVAL_TO_UFRAMES(le32_to_cpu(ep_ctx_out->ep_info));
60 + if (interval == xhci_interval) {
61 + spin_unlock_irqrestore(&xhci->lock, flags);
62 + mutex_unlock(&xhci->mutex);
66 + xhci_dbg(xhci, "Fixup interval=%d xhci_interval=%d\n",
67 + interval, xhci_interval);
68 + command = xhci_alloc_command_with_ctx(xhci, true, GFP_ATOMIC);
70 + /* Failure here is benign, poll at the original rate */
71 + spin_unlock_irqrestore(&xhci->lock, flags);
72 + mutex_unlock(&xhci->mutex);
76 + /* xHCI uses exponents for intervals... */
77 + xhci_interval = fls(interval) - 1;
78 + xhci_interval = clamp_val(xhci_interval, 3, 10);
79 + ep_info_tmp = le32_to_cpu(ep_ctx_out->ep_info);
80 + ep_info_tmp &= ~EP_INTERVAL(255);
81 + ep_info_tmp |= EP_INTERVAL(xhci_interval);
83 + /* Keep the endpoint context up-to-date while issuing the command. */
84 + xhci_endpoint_copy(xhci, vdev->in_ctx,
85 + vdev->out_ctx, ep_index);
86 + ep_ctx_in->ep_info = cpu_to_le32(ep_info_tmp);
89 + * We need to drop the lock, so take an explicit copy
90 + * of the ep context.
92 + xhci_endpoint_copy(xhci, command->in_ctx, vdev->in_ctx, ep_index);
94 + ctrl_ctx = xhci_get_input_control_ctx(command->in_ctx);
97 + "%s: Could not get input context, bad type.\n",
99 + spin_unlock_irqrestore(&xhci->lock, flags);
100 + xhci_free_command(xhci, command);
101 + mutex_unlock(&xhci->mutex);
104 + ctrl_ctx->add_flags = xhci_get_endpoint_flag_from_index(ep_index);
105 + ctrl_ctx->drop_flags = 0;
107 + spin_unlock_irqrestore(&xhci->lock, flags);
109 + ret = xhci_configure_endpoint(xhci, udev, command,
112 + xhci_warn(xhci, "%s: Configure endpoint failed: %d\n",
114 + xhci_free_command(xhci, command);
115 + mutex_unlock(&xhci->mutex);
119 * non-error returns are a promise to giveback() the urb later
120 * we drop ownership so next owner (or urb unlink) can get it
122 @@ -5219,6 +5316,7 @@ static const struct hc_driver xhci_hc_dr
123 .endpoint_reset = xhci_endpoint_reset,
124 .check_bandwidth = xhci_check_bandwidth,
125 .reset_bandwidth = xhci_reset_bandwidth,
126 + .fixup_endpoint = xhci_fixup_endpoint,
127 .address_device = xhci_address_device,
128 .enable_device = xhci_enable_device,
129 .update_hub_device = xhci_update_hub_device,