2 # For a description of the syntax of this configuration file,
3 # see scripts/kbuild/config-language.txt.
6 menu "Linux System Utilities"
12 acpid listens to ACPI events coming either in textual form from
13 /proc/acpi/event (though it is marked deprecated it is still widely
14 used and _is_ a standard) or in binary form from specified evdevs
15 (just use /dev/input/event*).
17 It parses the event to retrieve ACTION and a possible PARAMETER.
18 It then spawns /etc/acpi/<ACTION>[/<PARAMETER>] either via run-parts
19 (if the resulting path is a directory) or directly as an executable.
21 N.B. acpid relies on run-parts so have the latter installed.
23 config FEATURE_ACPID_COMPAT
24 bool "Accept and ignore redundant options"
28 Accept and ignore compatibility options -g -m -s -S -v.
35 Lists labels and UUIDs of all filesystems.
37 With all submodules selected, it will add ~8k to busybox.
43 dmesg is used to examine or control the kernel ring buffer. When the
44 Linux kernel prints messages to the system log, they are stored in
45 the kernel ring buffer. You can use dmesg to print the kernel's ring
46 buffer, clear the kernel ring buffer, change the size of the kernel
47 ring buffer, and change the priority level at which kernel messages
48 are also logged to the system console. Enable this option if you
49 wish to enable the 'dmesg' utility.
51 config FEATURE_DMESG_PRETTY
52 bool "Pretty dmesg output"
56 If you wish to scrub the syslog level from the output, say 'Y' here.
57 The syslog level is a string prefixed to every line with the form
60 With this option you will see:
62 Linux version 2.6.17.4 .....
63 BIOS-provided physical RAM map:
64 BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
66 Without this option you will see:
68 <5>Linux version 2.6.17.4 .....
69 <6>BIOS-provided physical RAM map:
70 <6> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
76 fbset is used to show or change the settings of a Linux frame buffer
77 device. The frame buffer device provides a simple and unique
78 interface to access a graphics display. Enable this option
79 if you wish to enable the 'fbset' utility.
81 config FEATURE_FBSET_FANCY
82 bool "Turn on extra fbset options"
86 This option enables extended fbset options, allowing one to set the
87 framebuffer size, color depth, etc. interface to access a graphics
88 display. Enable this option if you wish to enable extended fbset
91 config FEATURE_FBSET_READMODE
92 bool "Turn on fbset readmode support"
96 This option allows fbset to read the video mode database stored by
97 default as /etc/fb.modes, which can be used to set frame buffer
98 device to pre-defined video modes.
104 fdflush is only needed when changing media on slightly-broken
105 removable media drives. It is used to make Linux believe that a
106 hardware disk-change switch has been actuated, which causes Linux to
107 forget anything it has cached from the previous media. If you have
108 such a slightly-broken drive, you will need to run fdflush every time
109 you change a disk. Most people have working hardware and can safely
116 fdformat is used to low-level format a floppy disk.
122 The fdisk utility is used to divide hard disks into one or more
123 logical disks, which are generally called partitions. This utility
124 can be used to list and edit the set of partitions or BSD style
125 'disk slices' that are defined on a hard drive.
127 config FDISK_SUPPORT_LARGE_DISKS
128 bool "Support over 4GB disks"
132 Enable this option to support large disks > 4GB.
134 config FEATURE_FDISK_WRITABLE
139 Enabling this option allows you to create or change a partition table
140 and write those changes out to disk. If you leave this option
141 disabled, you will only be able to view the partition table.
143 config FEATURE_AIX_LABEL
144 bool "Support AIX disklabels"
146 depends on FDISK && FEATURE_FDISK_WRITABLE
148 Enabling this option allows you to create or change AIX disklabels.
149 Most people can safely leave this option disabled.
151 config FEATURE_SGI_LABEL
152 bool "Support SGI disklabels"
154 depends on FDISK && FEATURE_FDISK_WRITABLE
156 Enabling this option allows you to create or change SGI disklabels.
157 Most people can safely leave this option disabled.
159 config FEATURE_SUN_LABEL
160 bool "Support SUN disklabels"
162 depends on FDISK && FEATURE_FDISK_WRITABLE
164 Enabling this option allows you to create or change SUN disklabels.
165 Most people can safely leave this option disabled.
167 config FEATURE_OSF_LABEL
168 bool "Support BSD disklabels"
170 depends on FDISK && FEATURE_FDISK_WRITABLE
172 Enabling this option allows you to create or change BSD disklabels
173 and define and edit BSD disk slices.
175 config FEATURE_FDISK_ADVANCED
176 bool "Support expert mode"
178 depends on FDISK && FEATURE_FDISK_WRITABLE
180 Enabling this option allows you to do terribly unsafe things like
181 define arbitrary drive geometry, move the beginning of data in a
182 partition, and similarly evil things. Unless you have a very good
183 reason you would be wise to leave this disabled.
190 Prints the name of a filesystem with given label or UUID.
192 With all submodules selected, it will add ~8k to busybox.
198 Manage locks from shell scripts
204 Linux allows you to create ramdisks. This utility allows you to
205 delete them and completely free all memory that was used for the
206 ramdisk. For example, if you boot Linux into a ramdisk and later
207 pivot_root, you may want to free the memory that is allocated to the
208 ramdisk. If you have no use for freeing memory from a ramdisk, leave
215 The minix filesystem is a nice, small, compact, read-write filesystem
216 with little overhead. It is not a journaling filesystem however and
217 can experience corruption if it is not properly unmounted or if the
218 power goes off in the middle of a write. This utility allows you to
219 check for and attempt to repair any corruption that occurs to a minix
226 Utility to create EXT2 filesystems.
232 The minix filesystem is a nice, small, compact, read-write filesystem
233 with little overhead. If you wish to be able to create minix
234 filesystems this utility will do the job for you.
236 comment "Minix filesystem support"
237 depends on FSCK_MINIX || MKFS_MINIX
239 config FEATURE_MINIX2
240 bool "Support Minix fs v2 (fsck_minix/mkfs_minix)"
242 depends on FSCK_MINIX || MKFS_MINIX
244 If you wish to be able to create version 2 minix filesystems, enable
245 this. If you enabled 'mkfs_minix' then you almost certainly want to
246 be using the version 2 filesystem support.
252 Utility to create ReiserFS filesystems.
258 Utility to create FAT32 filesystems.
264 The getopt utility is used to break up (parse) options in command
265 lines to make it easy to write complex shell scripts that also check
266 for legal (and illegal) options. If you want to write horribly
267 complex shell scripts, or use some horribly complex shell script
268 written by others, this utility may be for you. Most people will
269 wisely leave this disabled.
271 config FEATURE_GETOPT_LONG
272 bool "Support option -l"
273 default y if LONG_OPTS
276 Enable support for long options (option -l).
282 The hexdump utility is used to display binary data in a readable
283 way that is comparable to the output from most hex editors.
285 config FEATURE_HEXDUMP_REVERSE
286 bool "Support -R, reverse of 'hexdump -Cv'"
290 The hexdump utility is used to display binary data in an ascii
291 readable way. This option creates binary data from an ascii input.
292 NB: this option is non-standard. It's unwise to use it in scripts
293 aimed to be portable.
300 hd is an alias to hexdump -C.
306 The hwclock utility is used to read and set the hardware clock
307 on a system. This is primarily used to set the current time on
308 shutdown in the hardware clock, so the hardware will keep the
309 correct time when Linux is _not_ running.
311 config FEATURE_HWCLOCK_LONG_OPTIONS
312 bool "Support long options (--hctosys,...)"
314 depends on HWCLOCK && LONG_OPTS
316 By default, the hwclock utility only uses short options. If you
317 are overly fond of its long options, such as --hctosys, --utc, etc)
318 then enable this option.
320 config FEATURE_HWCLOCK_ADJTIME_FHS
321 bool "Use FHS /var/lib/hwclock/adjtime"
325 Starting with FHS 2.3, the adjtime state file is supposed to exist
326 at /var/lib/hwclock/adjtime instead of /etc/adjtime. If you wish
327 to use the FHS behavior, answer Y here, otherwise answer N for the
328 classic /etc/adjtime path.
330 pathname.com/fhs/pub/fhs-2.3.html#VARLIBHWCLOCKSTATEDIRECTORYFORHWCLO
337 The ipcrm utility allows the removal of System V interprocess
338 communication (IPC) objects and the associated data structures
346 The ipcs utility is used to provide information on the currently
347 allocated System V interprocess (IPC) objects in the system.
353 losetup is used to associate or detach a loop device with a regular
354 file or block device, and to query the status of a loop device. This
355 version does not currently support enabling data encryption.
361 lspci is a utility for displaying information about PCI buses in the
362 system and devices connected to them.
364 This version uses sysfs (/sys/bus/pci/devices) only.
370 lsusb is a utility for displaying information about USB buses in the
371 system and devices connected to them.
373 This version uses sysfs (/sys/bus/usb/devices) only.
379 mdev is a mini-udev implementation for dynamically creating device
380 nodes in the /dev directory.
382 For more information, please see docs/mdev.txt
384 config FEATURE_MDEV_CONF
385 bool "Support /etc/mdev.conf"
389 Add support for the mdev config file to control ownership and
390 permissions of the device nodes.
392 For more information, please see docs/mdev.txt
394 config FEATURE_MDEV_RENAME
395 bool "Support subdirs/symlinks"
397 depends on FEATURE_MDEV_CONF
399 Add support for renaming devices and creating symlinks.
401 For more information, please see docs/mdev.txt
403 config FEATURE_MDEV_RENAME_REGEXP
404 bool "Support regular expressions substitutions when renaming device"
406 depends on FEATURE_MDEV_RENAME
408 Add support for regular expressions substitutions when renaming
411 config FEATURE_MDEV_EXEC
412 bool "Support command execution at device addition/removal"
414 depends on FEATURE_MDEV_CONF
416 This adds support for an optional field to /etc/mdev.conf for
417 executing commands when devices are created/removed.
419 For more information, please see docs/mdev.txt
421 config FEATURE_MDEV_LOAD_FIRMWARE
422 bool "Support loading of firmwares"
426 Some devices need to load firmware before they can be usable.
428 These devices will request userspace look up the files in
429 /lib/firmware/ and if it exists, send it to the kernel for
430 loading into the hardware.
436 The mkswap utility is used to configure a file or disk partition as
437 Linux swap space. This allows Linux to use the entire file or
438 partition as if it were additional RAM, which can greatly increase
439 the capability of low-memory machines. This additional memory is
440 much slower than real RAM, but can be very helpful at preventing your
441 applications being killed by the Linux out of memory (OOM) killer.
442 Once you have created swap space using 'mkswap' you need to enable
443 the swap space using the 'swapon' utility.
445 config FEATURE_MKSWAP_UUID
450 Generate swap spaces with universally unique identifiers.
456 more is a simple utility which allows you to read text one screen
457 sized page at a time. If you want to read text that is larger than
458 the screen, and you are using anything faster than a 300 baud modem,
459 you will probably find this utility very helpful. If you don't have
460 any need to reading text files, you can leave this disabled.
462 config FEATURE_USE_TERMIOS
463 bool "Use termios to manipulate the screen"
465 depends on MORE || TOP
467 This option allows utilities such as 'more' and 'top' to determine
468 the size of the screen. If you leave this disabled, your utilities
469 that display things on the screen will be especially primitive and
470 will be unable to determine the current screen size, and will be
471 unable to move the cursor.
474 bool #No description makes it a hidden option
477 config FEATURE_VOLUMEID_EXT
478 bool "Ext filesystem"
484 config FEATURE_VOLUMEID_BTRFS
485 bool "btrfs filesystem"
491 config FEATURE_VOLUMEID_REISERFS
492 bool "Reiser filesystem"
498 config FEATURE_VOLUMEID_FAT
499 bool "fat filesystem"
505 config FEATURE_VOLUMEID_HFS
506 bool "hfs filesystem"
512 config FEATURE_VOLUMEID_JFS
513 bool "jfs filesystem"
519 ### config FEATURE_VOLUMEID_UFS
520 ### bool "ufs filesystem"
522 ### depends on VOLUMEID
526 config FEATURE_VOLUMEID_XFS
527 bool "xfs filesystem"
533 config FEATURE_VOLUMEID_NTFS
534 bool "ntfs filesystem"
540 config FEATURE_VOLUMEID_ISO9660
541 bool "iso9660 filesystem"
547 config FEATURE_VOLUMEID_UDF
548 bool "udf filesystem"
554 config FEATURE_VOLUMEID_LUKS
555 bool "luks filesystem"
561 config FEATURE_VOLUMEID_LINUXSWAP
562 bool "linux swap filesystem"
568 ### config FEATURE_VOLUMEID_LVM
571 ### depends on VOLUMEID
575 config FEATURE_VOLUMEID_CRAMFS
576 bool "cramfs filesystem"
582 ### config FEATURE_VOLUMEID_HPFS
583 ### bool "hpfs filesystem"
585 ### depends on VOLUMEID
589 config FEATURE_VOLUMEID_ROMFS
590 bool "romfs filesystem"
596 config FEATURE_VOLUMEID_SYSV
597 bool "sysv filesystem"
603 ### config FEATURE_VOLUMEID_MINIX
604 ### bool "minix filesystem"
606 ### depends on VOLUMEID
610 ### These only detect partition tables - not used (yet?)
611 ### config FEATURE_VOLUMEID_MAC
612 ### bool "mac filesystem"
614 ### depends on VOLUMEID
618 ### config FEATURE_VOLUMEID_MSDOS
619 ### bool "msdos filesystem"
621 ### depends on VOLUMEID
625 config FEATURE_VOLUMEID_OCFS2
626 bool "ocfs2 filesystem"
632 ### config FEATURE_VOLUMEID_HIGHPOINTRAID
633 ### bool "highpoint raid"
635 ### depends on VOLUMEID
639 ### config FEATURE_VOLUMEID_ISWRAID
640 ### bool "intel raid"
642 ### depends on VOLUMEID
646 ### config FEATURE_VOLUMEID_LSIRAID
649 ### depends on VOLUMEID
653 ### config FEATURE_VOLUMEID_VIARAID
656 ### depends on VOLUMEID
660 ### config FEATURE_VOLUMEID_SILICONRAID
661 ### bool "silicon raid"
663 ### depends on VOLUMEID
667 ### config FEATURE_VOLUMEID_NVIDIARAID
668 ### bool "nvidia raid"
670 ### depends on VOLUMEID
674 ### config FEATURE_VOLUMEID_PROMISERAID
675 ### bool "promise raid"
677 ### depends on VOLUMEID
681 config FEATURE_VOLUMEID_LINUXRAID
692 All files and filesystems in Unix are arranged into one big directory
693 tree. The 'mount' utility is used to graft a filesystem onto a
694 particular part of the tree. A filesystem can either live on a block
695 device, or it can be accessible over the network, as is the case with
696 NFS filesystems. Most people using BusyBox will also want to enable
699 config FEATURE_MOUNT_FAKE
700 bool "Support option -f"
704 Enable support for faking a file system mount.
706 config FEATURE_MOUNT_VERBOSE
707 bool "Support option -v"
711 Enable multi-level -v[vv...] verbose messages. Useful if you
712 debug mount problems and want to see what is exactly passed
715 config FEATURE_MOUNT_HELPERS
716 bool "Support mount helpers"
720 Enable mounting of virtual file systems via external helpers.
721 E.g. "mount obexfs#-b00.11.22.33.44.55 /mnt" will in effect call
722 "obexfs -b00.11.22.33.44.55 /mnt"
723 Also "mount -t sometype [-o opts] fs /mnt" will try
724 "sometype [-o opts] fs /mnt" if simple mount syscall fails.
725 The idea is to use such virtual filesystems in /etc/fstab.
727 config FEATURE_MOUNT_LABEL
728 bool "Support specifiying devices by label or UUID"
733 This allows for specifying a device by label or uuid, rather than by
734 name. This feature utilizes the same functionality as blkid/findfs.
735 This also enables label or uuid support for swapon.
737 config FEATURE_MOUNT_NFS
738 bool "Support mounting NFS file systems"
741 select FEATURE_HAVE_RPC
742 select FEATURE_SYSLOG
744 Enable mounting of NFS file systems.
746 config FEATURE_MOUNT_CIFS
747 bool "Support mounting CIFS/SMB file systems"
751 Enable support for samba mounts.
753 config FEATURE_MOUNT_FLAGS
755 bool "Support lots of -o flags in mount"
758 Without this, mount only supports ro/rw/remount. With this, it
759 supports nosuid, suid, dev, nodev, exec, noexec, sync, async, atime,
760 noatime, diratime, nodiratime, loud, bind, move, shared, slave,
761 private, unbindable, rshared, rslave, rprivate, and runbindable.
763 config FEATURE_MOUNT_FSTAB
765 bool "Support /etc/fstab and -a"
768 Support mount all and looking for files in /etc/fstab.
774 The pivot_root utility swaps the mount points for the root filesystem
775 with some other mounted filesystem. This allows you to do all sorts
776 of wild and crazy things with your Linux system and is far more
777 powerful than 'chroot'.
779 Note: This is for initrd in linux 2.4. Under initramfs (introduced
780 in linux 2.6) use switch_root instead.
786 The rdate utility allows you to synchronize the date and time of your
787 system clock with the date and time of a remote networked system using
788 the RFC868 protocol, which is built into the inetd daemon on most
795 Print the device node associated with the filesystem mounted at '/'.
801 This allows you to parse /proc/profile for basic profiling.
807 Enter a system sleep state until specified wakeup time.
813 The script makes typescript of terminal session.
819 This program replays a typescript, using timing information
826 The linux32 utility is used to create a 32bit environment for the
827 specified program (usually a shell). It only makes sense to have
828 this util on a system that supports both 64bit and 32bit userland
829 (like amd64/x86, ppc64/ppc, sparc64/sparc, etc...).
835 This option enables both the 'swapon' and the 'swapoff' utilities.
836 Once you have created some swap space using 'mkswap', you also need
837 to enable your swap space with the 'swapon' utility. The 'swapoff'
838 utility is used, typically at system shutdown, to disable any swap
839 space. If you are not using any swap space, you can leave this
842 config FEATURE_SWAPON_PRI
843 bool "Support priority option -p"
847 Enable support for setting swap device priority in swapon.
853 The switch_root utility is used from initramfs to select a new
854 root device. Under initramfs, you have to use this instead of
855 pivot_root. (Stop reading here if you don't care why.)
857 Booting with initramfs extracts a gzipped cpio archive into rootfs
858 (which is a variant of ramfs/tmpfs). Because rootfs can't be moved
859 or unmounted*, pivot_root will not work from initramfs. Instead,
860 switch_root deletes everything out of rootfs (including itself),
861 does a mount --move that overmounts rootfs with the new root, and
862 then execs the specified init program.
864 * Because the Linux kernel uses rootfs internally as the starting
865 and ending point for searching through the kernel's doubly linked
866 list of active mount points. That's why.
872 When you want to remove a mounted filesystem from its current mount
873 point, for example when you are shutting down the system, the
874 'umount' utility is the tool to use. If you enabled the 'mount'
875 utility, you almost certainly also want to enable 'umount'.
877 config FEATURE_UMOUNT_ALL
878 bool "Support option -a"
882 Support -a option to unmount all currently mounted filesystems.
884 comment "Common options for mount/umount"
885 depends on MOUNT || UMOUNT
887 config FEATURE_MOUNT_LOOP
888 bool "Support loopback mounts"
890 depends on MOUNT || UMOUNT
892 Enabling this feature allows automatic mounting of files (containing
893 filesystem images) via the linux kernel's loopback devices.
894 The mount command will detect you are trying to mount a file instead
895 of a block device, and transparently associate the file with a
896 loopback device. The umount command will also free that loopback
899 You can still use the 'losetup' utility (to manually associate files
900 with loop devices) if you need to do something advanced, such as
901 specify an offset or cryptographic options to the loopback device.
902 (If you don't want umount to free the loop device, use "umount -D".)
904 config FEATURE_MTAB_SUPPORT
905 bool "Support for the old /etc/mtab file"
907 depends on MOUNT || UMOUNT
908 select FEATURE_MOUNT_FAKE
910 Historically, Unix systems kept track of the currently mounted
911 partitions in the file "/etc/mtab". These days, the kernel exports
912 the list of currently mounted partitions in "/proc/mounts", rendering
913 the old mtab file obsolete. (In modern systems, /etc/mtab should be
914 a symlink to /proc/mounts.)
916 The only reason to have mount maintain an /etc/mtab file itself is if
917 your stripped-down embedded system does not have a /proc directory.
918 If you must use this, keep in mind it's inherently brittle (for
919 example a mount under chroot won't update it), can't handle modern
920 features like separate per-process filesystem namespaces, requires
921 that your /etc directory be writeable, tends to get easily confused
922 by --bind or --move mounts, won't update if you rename a directory
923 that contains a mount point, and so on. (In brief: avoid.)
925 About the only reason to use this is if you've removed /proc from