Support also version v2 of TP-Link header
[oweals/u-boot_mod.git] / u-boot / include / image.h
1 /*
2  * (C) Copyright 2000-2005
3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4  *
5  * See file CREDITS for list of people who contributed to this
6  * project.
7  *
8  * This program is free software; you can redistribute it and/or
9  * modify it under the terms of the GNU General Public License as
10  * published by the Free Software Foundation; either version 2 of
11  * the License, or (at your option) any later version.
12  *
13  * This program is distributed in the hope that it will be useful,
14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16  * GNU General Public License for more details.
17  *
18  * You should have received a copy of the GNU General Public License
19  * along with this program; if not, write to the Free Software
20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21  * MA 02111-1307 USA
22  *
23  ********************************************************************
24  * NOTE: This header file defines an interface to U-Boot. Including
25  * this (unmodified) header file in another file is considered normal
26  * use of U-Boot, and does *not* fall under the heading of "derived
27  * work".
28  ********************************************************************
29  */
30
31 #ifndef __IMAGE_H__
32 #define __IMAGE_H__
33
34 /*
35  * Operating System Codes
36  */
37 #define IH_OS_INVALID   0       /* Invalid OS */
38 #define IH_OS_OPENBSD   1       /* OpenBSD    */
39 #define IH_OS_NETBSD    2       /* NetBSD     */
40 #define IH_OS_FREEBSD   3       /* FreeBSD    */
41 #define IH_OS_4_4BSD    4       /* 4.4BSD     */
42 #define IH_OS_LINUX     5       /* Linux      */
43 #define IH_OS_SVR4      6       /* SVR4       */
44 #define IH_OS_ESIX      7       /* Esix       */
45 #define IH_OS_SOLARIS   8       /* Solaris    */
46 #define IH_OS_IRIX      9       /* Irix       */
47 #define IH_OS_SCO       10      /* SCO        */
48 #define IH_OS_DELL      11      /* Dell       */
49 #define IH_OS_NCR       12      /* NCR        */
50 #define IH_OS_LYNXOS    13      /* LynxOS     */
51 #define IH_OS_VXWORKS   14      /* VxWorks    */
52 #define IH_OS_PSOS      15      /* pSOS       */
53 #define IH_OS_QNX       16      /* QNX        */
54 #define IH_OS_U_BOOT    17      /* Firmware   */
55 #define IH_OS_RTEMS     18      /* RTEMS      */
56 #define IH_OS_ARTOS     19      /* ARTOS      */
57 #define IH_OS_UNITY     20      /* Unity OS   */
58
59 /*
60  * CPU Architecture Codes (supported by Linux)
61  */
62 #define IH_CPU_INVALID          0       /* Invalid CPU  */
63 #define IH_CPU_ALPHA            1       /* Alpha        */
64 #define IH_CPU_ARM              2       /* ARM          */
65 #define IH_CPU_I386             3       /* Intel x86    */
66 #define IH_CPU_IA64             4       /* IA64         */
67 #define IH_CPU_MIPS             5       /* MIPS         */
68 #define IH_CPU_MIPS64           6       /* MIPS  64 Bit */
69 #define IH_CPU_PPC              7       /* PowerPC      */
70 #define IH_CPU_S390             8       /* IBM S390     */
71 #define IH_CPU_SH               9       /* SuperH       */
72 #define IH_CPU_SPARC            10      /* Sparc        */
73 #define IH_CPU_SPARC64          11      /* Sparc 64 Bit */
74 #define IH_CPU_M68K             12      /* M68K         */
75 #define IH_CPU_NIOS             13      /* Nios-32      */
76 #define IH_CPU_MICROBLAZE       14      /* MicroBlaze   */
77 #define IH_CPU_NIOS2            15      /* Nios-II      */
78 #define IH_CPU_BLACKFIN         16      /* Blackfin     */
79
80 /*
81  * Image Types
82  *
83  * "Standalone Programs" are directly runnable in the environment
84  *      provided by U-Boot; it is expected that (if they behave
85  *      well) you can continue to work in U-Boot after return from
86  *      the Standalone Program.
87  * "OS Kernel Images" are usually images of some Embedded OS which
88  *      will take over control completely. Usually these programs
89  *      will install their own set of exception handlers, device
90  *      drivers, set up the MMU, etc. - this means, that you cannot
91  *      expect to re-enter U-Boot except by resetting the CPU.
92  * "RAMDisk Images" are more or less just data blocks, and their
93  *      parameters (address, size) are passed to an OS kernel that is
94  *      being started.
95  * "Multi-File Images" contain several images, typically an OS
96  *      (Linux) kernel image and one or more data images like
97  *      RAMDisks. This construct is useful for instance when you want
98  *      to boot over the network using BOOTP etc., where the boot
99  *      server provides just a single image file, but you want to get
100  *      for instance an OS kernel and a RAMDisk image.
101  *
102  *      "Multi-File Images" start with a list of image sizes, each
103  *      image size (in bytes) specified by an "uint32_t" in network
104  *      byte order. This list is terminated by an "(uint32_t)0".
105  *      Immediately after the terminating 0 follow the images, one by
106  *      one, all aligned on "uint32_t" boundaries (size rounded up to
107  *      a multiple of 4 bytes - except for the last file).
108  *
109  * "Firmware Images" are binary images containing firmware (like
110  *      U-Boot or FPGA images) which usually will be programmed to
111  *      flash memory.
112  *
113  * "Script files" are command sequences that will be executed by
114  *      U-Boot's command interpreter; this feature is especially
115  *      useful when you configure U-Boot to use a real shell (hush)
116  *      as command interpreter (=> Shell Scripts).
117  */
118
119 #define IH_TYPE_INVALID         0       /* Invalid Image               */
120 #define IH_TYPE_STANDALONE      1       /* Standalone Program          */
121 #define IH_TYPE_KERNEL          2       /* OS Kernel Image             */
122 #define IH_TYPE_RAMDISK         3       /* RAMDisk Image               */
123 #define IH_TYPE_MULTI           4       /* Multi-File Image            */
124 #define IH_TYPE_FIRMWARE        5       /* Firmware Image              */
125 #define IH_TYPE_SCRIPT          6       /* Script file                 */
126 #define IH_TYPE_FILESYSTEM      7       /* Filesystem Image (any type) */
127
128 /*
129  * Compression Types
130  */
131 #define IH_COMP_NONE    0       /* no    compression */
132 #define IH_COMP_GZIP    1       /* gzip  compression */
133 #define IH_COMP_BZIP2   2       /* bzip2 compression */
134 #define IH_COMP_LZMA    3       /* lzma  compression */
135
136 #define IH_MAGIC        0x27051956      /* Image Magic Number */
137 #define IH_NMLEN        32              /* Image Name Length  */
138
139 /*
140  * All data in network byte order (aka natural aka bigendian)
141  */
142 typedef struct image_header {
143         uint32_t ih_magic;              /* Image Header Magic Number */
144         uint32_t ih_hcrc;               /* Image Header CRC Checksum */
145         uint32_t ih_time;               /* Image Creation Timestamp  */
146         uint32_t ih_size;               /* Image Data Size           */
147         uint32_t ih_load;               /* Data  Load  Address       */
148         uint32_t ih_ep;                 /* Entry Point Address       */
149         uint32_t ih_dcrc;               /* Image Data CRC Checksum   */
150         uint8_t  ih_os;                 /* Operating System          */
151         uint8_t  ih_arch;               /* CPU architecture          */
152         uint8_t  ih_type;               /* Image Type                */
153         uint8_t  ih_comp;               /* Compression Type          */
154         uint8_t  ih_name[IH_NMLEN];     /* Image Name                */
155 } image_header_t;
156
157 #endif /* __IMAGE_H__ */