u-boot/Makefile

   1 #
   2 # (C) Copyright 2000-2006
   3 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4 #
   5 # See file CREDITS for list of people who contributed to this
   6 # project.
   7 #
   8 # This program is free software; you can redistribute it and/or
   9 # modify it under the terms of the GNU General Public License as
  10 # published by the Free Software Foundation; either version 2 of
  11 # the License, or (at your option) any later version.
  12 #
  13 # This program is distributed in the hope that it will be useful,
  14 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  15 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16 # GNU General Public License for more details.
  17 #
  18 # You should have received a copy of the GNU General Public License
  19 # along with this program; if not, write to the Free Software
  20 # Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21 # MA 02111-1307 USA
  22 #
  23
  24 VERSION                 = 1
  25 PATCHLEVEL              = 1
  26 SUBLEVEL                = 4
  27 EXTRAVERSION    =
  28 U_BOOT_VERSION  = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
  29 VERSION_FILE    = include/version_autogenerated.h
  30
  31 HOSTARCH := $(shell uname -m | \
  32         sed -e s/i.86/i386/ \
  33             -e s/sun4u/sparc64/ \
  34             -e s/arm.*/arm/ \
  35             -e s/sa110/arm/ \
  36             -e s/powerpc/ppc/ \
  37             -e s/macppc/ppc/)
  38
  39 HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
  40             sed -e 's/\(cygwin\).*/cygwin/')
  41
  42 export  HOSTARCH HOSTOS
  43
  44 # Deal with colliding definitions from tcsh etc.
  45 VENDOR=
  46
  47 #########################################################################
  48
  49 TOPDIR  := $(shell if [ "$$PWD" != "" ]; then echo $$PWD; else pwd; fi)
  50 export  TOPDIR
  51
  52 ifeq ($(COMPRESSED_UBOOT),1)
  53 COMPRESSED_UBOOT = 1
  54 export export COMPRESSED_UBOOT
  55 endif
  56
  57 ifeq (include/config.mk,$(wildcard include/config.mk))
  58 # load ARCH, BOARD, and CPU configuration
  59 include include/config.mk
  60 export  ARCH CPU BOARD VENDOR SOC
  61 ifndef CROSS_COMPILE
  62 ifeq ($(HOSTARCH),ppc)
  63 CROSS_COMPILE =
  64 else
  65 ifeq ($(ARCH),ppc)
  66 CROSS_COMPILE = powerpc-linux-
  67 endif
  68 ifeq ($(ARCH),arm)
  69 CROSS_COMPILE = arm-linux-
  70 endif
  71 ifeq ($(ARCH),i386)
  72 ifeq ($(HOSTARCH),i386)
  73 CROSS_COMPILE =
  74 else
  75 CROSS_COMPILE = i386-linux-
  76 endif
  77 endif
  78 ifeq ($(ARCH),mips)
  79 CROSS_COMPILE = mips-linux-
  80 endif
  81 ifeq ($(ARCH),nios)
  82 CROSS_COMPILE = nios-elf-
  83 endif
  84 ifeq ($(ARCH),nios2)
  85 CROSS_COMPILE = nios2-elf-
  86 endif
  87 ifeq ($(ARCH),m68k)
  88 CROSS_COMPILE = m68k-elf-
  89 endif
  90 ifeq ($(ARCH),microblaze)
  91 CROSS_COMPILE = mb-
  92 endif
  93 ifeq ($(ARCH),blackfin)
  94 CROSS_COMPILE = bfin-elf-
  95 endif
  96 endif
  97 endif
  98
  99 export  CROSS_COMPILE
 100
 101 # load other configuration
 102 include $(TOPDIR)/config.mk
 103
 104
 105 #########################################################################
 106 # U-Boot objects....order is important (i.e. start must be first)
 107 OBJS  = cpu/$(CPU)/start.o
 108
 109 ifeq ($(COMPRESSED_UBOOT),1)
 110 OBJS_BOOTSTRAP  = cpu/$(CPU)/start_bootstrap.o
 111 endif
 112
 113 LIBS  = lib_generic/libgeneric.a
 114 LIBS += common/libcommon.a
 115 LIBS += board/$(BOARDDIR)/lib$(BOARD).a
 116 LIBS += cpu/$(CPU)/lib$(CPU).a
 117
 118 ifdef SOC
 119 LIBS += cpu/$(CPU)/$(SOC)/lib$(SOC).a
 120 endif
 121
 122 LIBS += lib_$(ARCH)/lib$(ARCH).a
 123 LIBS += drivers/libdrivers.a
 124 LIBS += net/libnet.a
 125 LIBS += rtc/librtc.a
 126 LIBS += httpd/libhttpd.a
 127 LIBS += $(BOARDLIBS)
 128
 129 ifeq ($(COMPRESSED_UBOOT),1)
 130 LIBS_BOOTSTRAP = lib_bootstrap/libbootstrap.a
 131 LIBS_BOOTSTRAP += board/$(BOARDDIR)/lib$(BOARD).a
 132 LIBS_BOOTSTRAP += cpu/$(CPU)/lib$(CPU).a
 133 LIBS_BOOTSTRAP += cpu/$(CPU)/$(SOC)/lib$(SOC).a
 134 endif
 135
 136 .PHONY : $(LIBS)
 137
 138 ifeq ($(COMPRESSED_UBOOT),1)
 139 .PHONY : $(LIBS_BOOTSTRAP)
 140 endif
 141
 142 # Add GCC lib
 143 PLATFORM_LIBS += -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc
 144
 145 # The "tools" are needed early, so put this first
 146 # Don't include stuff already done in $(LIBS)
 147 SUBDIRS = tools
 148
 149 .PHONY : $(SUBDIRS)
 150
 151 #########################################################################
 152 #########################################################################
 153
 154 ALL = u-boot.srec u-boot.bin System.map
 155
 156 ifeq ($(COMPRESSED_UBOOT),1)
 157 all:            $(ALL) tuboot.bin
 158 else
 159 all:            $(ALL)
 160 endif
 161
 162 u-boot.hex:     u-boot
 163                 $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@
 164
 165 u-boot.srec:    u-boot
 166                 $(OBJCOPY) ${OBJCFLAGS} -O srec $< $@
 167
 168 u-boot.bin:     u-boot
 169                 $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
 170
 171 u-boot.img:     u-boot.bin
 172                 ./tools/mkimage -A $(ARCH) -T firmware -C none \
 173                 -a $(TEXT_BASE) -e 0 \
 174                 -n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \
 175                         sed -e 's/"[     ]*$$/ for $(BOARD) board"/') \
 176                 -d $< $@
 177
 178 u-boot.dis:     u-boot
 179                 $(OBJDUMP) -d $< > $@
 180
 181 u-boot:         depend version $(SUBDIRS) $(OBJS) $(LIBS) $(LDSCRIPT)
 182                 UNDEF_SYM=`$(OBJDUMP) -x $(LIBS) |sed  -n -e 's/.*\(__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\
 183                 $(LD) $(LDFLAGS) $$UNDEF_SYM $(OBJS) \
 184                         --start-group $(LIBS) --end-group $(PLATFORM_LIBS) \
 185                         -Map u-boot.map -o u-boot
 186
 187 $(LIBS):
 188                 $(MAKE) -C `dirname $@`
 189
 190 $(SUBDIRS):
 191                 $(MAKE) -C $@ all
 192
 193 ifeq ($(COMPRESSED_UBOOT),1)
 194 LZMA = $(BUILD_TOPDIR)/host_util/lzma
 195
 196 tuboot.bin:     System.map bootstrap.bin u-boot.lzimg
 197                 @cat bootstrap.bin > $@
 198                 @cat u-boot.lzimg >> $@
 199
 200 u-boot.lzimg: $(obj)u-boot.bin System.map
 201                 @rm -rf u-boot.bin.lzma
 202                 #$(LZMA) e $(obj)u-boot.bin u-boot.bin.lzma
 203                 $(LZMA) --best --keep $(obj)u-boot.bin
 204                 ./tools/mkimage -A mips -T firmware -C lzma \
 205                 -a 0x$(shell grep "T _start" $(TOPDIR)/System.map | awk '{ printf "%s", $$1 }') \
 206                 -e 0x$(shell grep "T _start" $(TOPDIR)/System.map | awk '{ printf "%s", $$1 }') \
 207                 -n 'u-boot image' -d $(obj)u-boot.bin.lzma $@
 208
 209 bootstrap.bin:  bootstrap
 210                 $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
 211
 212 bootstrap:      depend version $(SUBDIRS) $(OBJS_BOOTSTRAP) $(LIBS_BOOTSTRAP) $(LDSCRIPT_BOOTSTRAP)
 213                 UNDEF_SYM=`$(OBJDUMP) -x $(LIBS_BOOTSTRAP) |sed  -n -e 's/.*\(__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\
 214                 $(LD) $(LDFLAGS_BOOTSTRAP) $$UNDEF_SYM $(OBJS_BOOTSTRAP) \
 215                         --start-group $(LIBS_BOOTSTRAP) --end-group $(PLATFORM_LIBS) \
 216                         -Map bootstrap.map -o bootstrap
 217
 218 $(LIBS_BOOTSTRAP):
 219                 $(MAKE) -C `dirname $@`
 220 endif
 221
 222 version:
 223                 @echo -n "#define U_BOOT_VERSION \"U-Boot " > $(VERSION_FILE); \
 224                 echo -n "$(U_BOOT_VERSION)" >> $(VERSION_FILE); \
 225                 echo "\"" >> $(VERSION_FILE)
 226
 227 gdbtools:
 228                 $(MAKE) -C tools/gdb || exit 1
 229
 230 depend dep:
 231                 @for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir .depend ; done
 232
 233 tags:
 234                 ctags -w `find $(SUBDIRS) include \
 235                                 lib_generic board/$(BOARDDIR) cpu/$(CPU) lib_$(ARCH) \
 236                                 fs/cramfs fs/fat fs/fdos fs/jffs2 \
 237                                 net disk rtc dtt drivers drivers/sk98lin common \
 238                         \( -name CVS -prune \) -o \( -name '*.[ch]' -print \)`
 239
 240 etags:
 241                 etags -a `find $(SUBDIRS) include \
 242                                 lib_generic board/$(BOARDDIR) cpu/$(CPU) lib_$(ARCH) \
 243                                 fs/cramfs fs/fat fs/fdos fs/jffs2 \
 244                                 net disk rtc dtt drivers drivers/sk98lin common \
 245                         \( -name CVS -prune \) -o \( -name '*.[ch]' -print \)`
 246
 247 System.map:     u-boot
 248                 @$(NM) $< | \
 249                 grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
 250                 sort > System.map
 251
 252 #########################################################################
 253 else
 254 all install u-boot u-boot.srec depend dep:
 255         @echo "System not configured - see README" >&2
 256         @ exit 1
 257 endif
 258
 259 #########################################################################
 260
 261 unconfig:
 262         @rm -f include/config.h include/config.mk board/*/config.tmp
 263
 264 #========================================================================
 265 # MIPS
 266 #========================================================================
 267 #########################################################################
 268 ## MIPS32 AR7100 (24K)
 269 #########################################################################
 270 common_config :
 271         @ >include/config.h
 272
 273 ifdef CONFIG_BOOTDELAY
 274         @echo "#define CONFIG_BOOTDELAY "$(CONFIG_BOOTDELAY)   >> include/config.h
 275 endif
 276
 277 ifdef CFG_PLL_FREQ
 278         @echo "#define CFG_PLL_FREQ "$(CFG_PLL_FREQ)           >> include/config.h
 279 endif
 280
 281 ifdef DISABLE_CONSOLE_OUTPUT
 282         @echo "#define CONFIG_SILENT_CONSOLE                1" >> include/config.h
 283 endif
 284
 285         @echo "#define CONFIG_DELAY_TO_AUTORUN_HTTPD        3" >> include/config.h
 286         @echo "#define CONFIG_DELAY_TO_AUTORUN_CONSOLE      5" >> include/config.h
 287         @echo "#define CONFIG_DELAY_TO_AUTORUN_NETCONSOLE   7" >> include/config.h
 288
 289         # max delay time for button pressing
 290         @echo "#define CONFIG_MAX_BUTTON_PRESSING          10" >> include/config.h
 291
 292         # don't show info about console (in, out, err...)
 293         @echo "#define CFG_CONSOLE_INFO_QUIET"                 >> include/config.h
 294
 295 hornet_common_config : common_config
 296         @echo "#define CONFIG_AR7240                        1" >> include/config.h
 297         @echo "#define CONFIG_MACH_HORNET                   1" >> include/config.h
 298         @echo "#define CONFIG_HORNET_1_1_WAR                1" >> include/config.h
 299
 300 wr703n_config : unconfig hornet_common_config
 301         @echo '======= Configuring for TP-Link TL-WR703N at:' `date` '======='
 302         @echo "#define CONFIG_FOR_TPLINK_WR703N_V1          1" >> include/config.h
 303         @echo "#define GPIO_SYS_LED_BIT                    27" >> include/config.h
 304         @echo "#define GPIO_SYS_LED_ON                      0" >> include/config.h
 305         @echo "#define GPIO_RST_BUTTON_BIT                 11" >> include/config.h
 306         @echo "#define DEFAULT_FLASH_SIZE_IN_MB             4" >> include/config.h
 307         @echo "#define BOARD_CUSTOM_STRING                  \"AP121 (AR9331) U-Boot for TL-WR703N\"" >> include/config.h
 308
 309         @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240
 310
 311 wr720n_v3_CH_config : unconfig hornet_common_config
 312         @echo '======= Configuring for TP-Link TL-WR720N v3 CH at:' `date` '======='
 313         @echo "#define CONFIG_FOR_TPLINK_WR720N_V3          1" >> include/config.h
 314         @echo "#define GPIO_SYS_LED_BIT                    27" >> include/config.h
 315         @echo "#define GPIO_SYS_LED_ON                      0" >> include/config.h
 316         @echo "#define GPIO_RST_BUTTON_BIT                 11" >> include/config.h
 317         @echo "#define DEFAULT_FLASH_SIZE_IN_MB             4" >> include/config.h
 318         @echo "#define BOARD_CUSTOM_STRING                  \"AP121 (AR9331) U-Boot for TL-WR720N v3 CH\"" >> include/config.h
 319
 320         @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240
 321
 322 wr710n_config : unconfig hornet_common_config
 323         @echo '======= Configuring for TP-Link TL-WR710N at:' `date` '======='
 324         @echo "#define CONFIG_FOR_TPLINK_WR710N_V1          1" >> include/config.h
 325         @echo "#define GPIO_SYS_LED_BIT                    27" >> include/config.h
 326         @echo "#define GPIO_SYS_LED_ON                      0" >> include/config.h
 327         @echo "#define GPIO_RST_BUTTON_BIT                 11" >> include/config.h
 328         @echo "#define DEFAULT_FLASH_SIZE_IN_MB             8" >> include/config.h
 329         @echo "#define BOARD_CUSTOM_STRING                  \"AP121 (AR9331) U-Boot for TL-WR710N\"" >> include/config.h
 330
 331         @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240
 332
 333 mr3020_config : unconfig hornet_common_config
 334         @echo '======= Configuring for TP-Link TL-MR3020 at:' `date` '======='
 335         @echo "#define CONFIG_FOR_TPLINK_MR3020_V1          1" >> include/config.h
 336         @echo "#define GPIO_INTERNET_LED_BIT               27" >> include/config.h
 337         @echo "#define GPIO_INTERNET_LED_ON                 0" >> include/config.h
 338         @echo "#define GPIO_WPS_LED_BIT                    26" >> include/config.h
 339         @echo "#define GPIO_WPS_LED_ON                      0" >> include/config.h
 340         @echo "#define GPIO_WLAN_LED_BIT                    0" >> include/config.h
 341         @echo "#define GPIO_WLAN_LED_ON                     1" >> include/config.h
 342         @echo "#define GPIO_ETH_LED_BIT                    17" >> include/config.h
 343         @echo "#define GPIO_ETH_LED_ON                      0" >> include/config.h
 344         @echo "#define GPIO_RST_BUTTON_BIT                 11" >> include/config.h
 345         @echo "#define DEFAULT_FLASH_SIZE_IN_MB             4" >> include/config.h
 346         @echo "#define BOARD_CUSTOM_STRING                  \"AP121 (AR9331) U-Boot for TL-MR3020\"" >> include/config.h
 347
 348         @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240
 349
 350 mr3040_config : unconfig hornet_common_config
 351         @echo '======= Configuring for TP-Link TL-MR3040 at:' `date` '======='
 352         @echo "#define CONFIG_FOR_TPLINK_MR3040_V1V2        1" >> include/config.h
 353         @echo "#define GPIO_INTERNET_LED_BIT               27" >> include/config.h
 354         @echo "#define GPIO_INTERNET_LED_ON                 0" >> include/config.h
 355         @echo "#define GPIO_WLAN_LED_BIT                   26" >> include/config.h
 356         @echo "#define GPIO_WLAN_LED_ON                     0" >> include/config.h
 357         @echo "#define GPIO_ETH_LED_BIT                    17" >> include/config.h
 358         @echo "#define GPIO_ETH_LED_ON                      0" >> include/config.h
 359         @echo "#define GPIO_RST_BUTTON_BIT                 11" >> include/config.h
 360         @echo "#define DEFAULT_FLASH_SIZE_IN_MB             4" >> include/config.h
 361         @echo "#define BOARD_CUSTOM_STRING                  \"AP121 (AR9331) U-Boot for TL-MR3040\"" >> include/config.h
 362
 363         @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240
 364
 365 mr10u_config : unconfig hornet_common_config
 366         @echo '======= Configuring for TP-Link TL-MR10U at:' `date` '======='
 367         @echo "#define CONFIG_FOR_TPLINK_MR10U_V1           1" >> include/config.h
 368         @echo "#define GPIO_SYS_LED_BIT                    27" >> include/config.h
 369         @echo "#define GPIO_SYS_LED_ON                      0" >> include/config.h
 370         @echo "#define GPIO_RST_BUTTON_BIT                 11" >> include/config.h
 371         @echo "#define DEFAULT_FLASH_SIZE_IN_MB             4" >> include/config.h
 372         @echo "#define BOARD_CUSTOM_STRING                  \"AP121 (AR9331) U-Boot for TL-MR10U\"" >> include/config.h
 373
 374         @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240
 375
 376 mr13u_config : unconfig hornet_common_config
 377         @echo '======= Configuring for TP-Link TL-MR13U at:' `date` '======='
 378         @echo "#define CONFIG_FOR_TPLINK_MR13U_V1           1" >> include/config.h
 379         @echo "#define GPIO_SYS_LED_BIT                    27" >> include/config.h
 380         @echo "#define GPIO_SYS_LED_ON                      0" >> include/config.h
 381         @echo "#define GPIO_RST_BUTTON_BIT                 11" >> include/config.h
 382         @echo "#define DEFAULT_FLASH_SIZE_IN_MB             4" >> include/config.h
 383         @echo "#define BOARD_CUSTOM_STRING                  \"AP121 (AR9331) U-Boot for TL-MR13U\"" >> include/config.h
 384
 385         @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240
 386
 387 wr740n_v4_config : unconfig hornet_common_config
 388         @echo '======= Configuring for TP-Link TL-WR740N v4 at:' `date` '======='
 389         @echo "#define CONFIG_FOR_TPLINK_WR740N_V4          1" >> include/config.h
 390         @echo "#define GPIO_SYS_LED_BIT                    27" >> include/config.h
 391         @echo "#define GPIO_SYS_LED_ON                      0" >> include/config.h
 392         @echo "#define GPIO_WLAN_LED_BIT                    0" >> include/config.h
 393         @echo "#define GPIO_WLAN_LED_ON                     1" >> include/config.h
 394         @echo "#define GPIO_LAN1_LED_BIT                   14" >> include/config.h
 395         @echo "#define GPIO_LAN1_LED_ON                     1" >> include/config.h
 396         @echo "#define GPIO_LAN2_LED_BIT                   15" >> include/config.h
 397         @echo "#define GPIO_LAN2_LED_ON                     1" >> include/config.h
 398         @echo "#define GPIO_LAN3_LED_BIT                   16" >> include/config.h
 399         @echo "#define GPIO_LAN3_LED_ON                     1" >> include/config.h
 400         @echo "#define GPIO_LAN4_LED_BIT                   17" >> include/config.h
 401         @echo "#define GPIO_LAN4_LED_ON                     0" >> include/config.h
 402         @echo "#define GPIO_INTERNET_LED_BIT               13" >> include/config.h
 403         @echo "#define GPIO_INTERNET_LED_ON                 1" >> include/config.h
 404         @echo "#define GPIO_QSS_LED_BIT                     1" >> include/config.h
 405         @echo "#define GPIO_QSS_LED_ON                      1" >> include/config.h
 406         @echo "#define GPIO_RST_BUTTON_BIT                 11" >> include/config.h
 407         @echo "#define DEFAULT_FLASH_SIZE_IN_MB             4" >> include/config.h
 408         @echo "#define BOARD_CUSTOM_STRING                  \"AP121 (AR9331) U-Boot for TL-WR74xN/D v4\"" >> include/config.h
 409
 410         @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240
 411
 412 mr3220_v2_config : unconfig hornet_common_config
 413         @echo '======= Configuring for TP-Link TL-MR3220 v2 at:' `date` '======='
 414         @echo "#define CONFIG_FOR_TPLINK_MR3220_V2          1" >> include/config.h
 415         @echo "#define GPIO_SYS_LED_BIT                    27" >> include/config.h
 416         @echo "#define GPIO_SYS_LED_ON                      0" >> include/config.h
 417         @echo "#define GPIO_WLAN_LED_BIT                    0" >> include/config.h
 418         @echo "#define GPIO_WLAN_LED_ON                     1" >> include/config.h
 419         @echo "#define GPIO_LAN1_LED_BIT                   14" >> include/config.h
 420         @echo "#define GPIO_LAN1_LED_ON                     1" >> include/config.h
 421         @echo "#define GPIO_LAN2_LED_BIT                   15" >> include/config.h
 422         @echo "#define GPIO_LAN2_LED_ON                     1" >> include/config.h
 423         @echo "#define GPIO_LAN3_LED_BIT                   16" >> include/config.h
 424         @echo "#define GPIO_LAN3_LED_ON                     1" >> include/config.h
 425         @echo "#define GPIO_LAN4_LED_BIT                   17" >> include/config.h
 426         @echo "#define GPIO_LAN4_LED_ON                     0" >> include/config.h
 427         @echo "#define GPIO_INTERNET_LED_BIT               13" >> include/config.h
 428         @echo "#define GPIO_INTERNET_LED_ON                 1" >> include/config.h
 429         @echo "#define GPIO_QSS_LED_BIT                     1" >> include/config.h
 430         @echo "#define GPIO_QSS_LED_ON                      1" >> include/config.h
 431         @echo "#define GPIO_USB_LED_BIT                    26" >> include/config.h
 432         @echo "#define GPIO_USB_LED_ON                      1" >> include/config.h
 433         @echo "#define GPIO_RST_BUTTON_BIT                 11" >> include/config.h
 434         @echo "#define DEFAULT_FLASH_SIZE_IN_MB             4" >> include/config.h
 435         @echo "#define BOARD_CUSTOM_STRING                  \"AP121 (AR9331) U-Boot for TL-MR3220 v2\"" >> include/config.h
 436
 437         @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240
 438
 439 dir505_config : unconfig hornet_common_config
 440         @echo '======= Configuring for D-Link DIR-505 at:' `date` '======='
 441         @echo "#define CONFIG_FOR_DLINK_DIR505_A1           1" >> include/config.h
 442         @echo "#define GPIO_SYS_LED_BIT                    27" >> include/config.h
 443         @echo "#define GPIO_SYS_LED_ON                      0" >> include/config.h
 444
 445         # we will use WPS button instead of reset
 446         @echo "#define GPIO_RST_BUTTON_BIT                 11" >> include/config.h
 447         @echo "#define GPIO_RST_BUTTON_IS_ACTIVE_LOW        1" >> include/config.h
 448
 449         @echo "#define DEFAULT_FLASH_SIZE_IN_MB             8" >> include/config.h
 450         @echo "#define BOARD_CUSTOM_STRING                  \"AP121 (AR9331) U-Boot for DIR-505\"" >> include/config.h
 451
 452         @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240
 453
 454 gs_oolite_v1_dev_config : unconfig hornet_common_config
 455         @echo '======= Configuring for GS-Oolite v1 with dev board at:' `date` '======='
 456         @echo "#define CONFIG_FOR_GS_OOLITE_V1_DEV          1" >> include/config.h
 457         @echo "#define GPIO_SYS_LED_BIT                    27" >> include/config.h
 458         @echo "#define GPIO_SYS_LED_ON                      0" >> include/config.h
 459         @echo "#define GPIO_WAN_LED_BIT                    17" >> include/config.h
 460         @echo "#define GPIO_WAN_LED_ON                      0" >> include/config.h
 461         @echo "#define GPIO_LAN1_LED_BIT                   13" >> include/config.h
 462         @echo "#define GPIO_LAN1_LED_ON                     0" >> include/config.h
 463         @echo "#define GPIO_LAN2_LED_BIT                   15" >> include/config.h
 464         @echo "#define GPIO_LAN2_LED_ON                     0" >> include/config.h
 465         @echo "#define GPIO_RST_BUTTON_BIT                 11" >> include/config.h
 466         @echo "#define DEFAULT_FLASH_SIZE_IN_MB            16" >> include/config.h
 467         @echo "#define BOARD_CUSTOM_STRING                  \"AP121 (AR9331) U-Boot for GS-Oolite v1\"" >> include/config.h
 468
 469         @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240
 470
 471 carambola2_config : unconfig hornet_common_config
 472         @echo '======= Configuring for 8devices Carambola 2 at:' `date` '======='
 473         @echo "#define CONFIG_FOR_8DEVICES_CARAMBOLA2       1" >> include/config.h
 474
 475         # Carambola 2 uses uncompressed version
 476         @echo "#undef COMPRESSED_UBOOT"                        >> include/config.h
 477
 478         # Carambola 2 uses 40 MHz oscillator
 479         @echo "#define CONFIG_40MHZ_XTAL_SUPPORT            1" >> include/config.h
 480
 481         @echo "#define GPIO_WLAN_LED_BIT                    0" >> include/config.h
 482         @echo "#define GPIO_WLAN_LED_ON                     0" >> include/config.h
 483         @echo "#define GPIO_RST_BUTTON_BIT                 11" >> include/config.h
 484
 485         # Carambola 2 development board has RST button pulled up, so it is active at low
 486         @echo "#define GPIO_RST_BUTTON_IS_ACTIVE_LOW        1" >> include/config.h
 487
 488         @echo "#define DEFAULT_FLASH_SIZE_IN_MB            16" >> include/config.h
 489         @echo "#define BOARD_CUSTOM_STRING                  \"AP121 (AR9331) U-Boot for CARAMBOLA2 v1\"" >> include/config.h
 490
 491         @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240
 492
 493 dragino_v2_ms14_config : unconfig hornet_common_config
 494         @echo '======= Configuring for Dragino Dragino v2 (MS14) at:' `date` '======='
 495         @echo "#define CONFIG_FOR_DRAGINO_V2                1" >> include/config.h
 496         @echo "#undef  COMPRESSED_UBOOT"                       >> include/config.h
 497         @echo "#define GPIO_WLAN_LED_BIT                    0" >> include/config.h
 498         @echo "#define GPIO_WLAN_LED_ON                     1" >> include/config.h
 499         @echo "#define GPIO_WAN_LED_BIT                    17" >> include/config.h
 500         @echo "#define GPIO_WAN_LED_ON                      0" >> include/config.h
 501         @echo "#define GPIO_LAN_LED_BIT                    13" >> include/config.h
 502         @echo "#define GPIO_LAN_LED_ON                      0" >> include/config.h
 503         @echo "#define GPIO_INTERNET_LED_BIT               28" >> include/config.h
 504         @echo "#define GPIO_INTERNET_LED_ON                 1" >> include/config.h
 505         @echo "#define GPIO_RST_BUTTON_BIT                 11" >> include/config.h
 506         @echo "#define GPIO_RST_BUTTON_IS_ACTIVE_LOW        1" >> include/config.h
 507         @echo "#define DEFAULT_FLASH_SIZE_IN_MB            16" >> include/config.h
 508         @echo "#define WEBFAILSAFE_DISABLE_ART_UPGRADE      1" >> include/config.h
 509         @echo "#define WEBFAILSAFE_DISABLE_UBOOT_UPGRADE    1" >> include/config.h
 510         @echo "#define BOARD_CUSTOM_STRING                  \"AP121 (AR9331) U-Boot for Dragino v2 MS14\"" >> include/config.h
 511
 512         @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240
 513
 514 wasp_common_config : common_config
 515         @echo "#define CONFIG_AR7240                        1" >> include/config.h
 516         @echo "#define CONFIG_WASP                          1" >> include/config.h
 517         @echo "#define CONFIG_WASP_SUPPORT                  1" >> include/config.h
 518
 519 wdr3600_43x0_config : unconfig wasp_common_config
 520         @echo '======= Configuring for TP-Link TL-WDR3600/43x0 at:' `date` '======='
 521         @echo "#define CONFIG_FOR_TPLINK_WDR3600_WDR43X0_V1 1" >> include/config.h
 522         @echo "#define DDR2_32BIT_SUPPORT                   1" >> include/config.h
 523         @echo "#define CFG_ATHRS17_PHY                      1" >> include/config.h
 524         @echo "#define CFG_AG7240_NMACS                     1" >> include/config.h
 525         @echo "#define CFG_DUAL_PHY_SUPPORT                 1" >> include/config.h
 526         @echo "#define GPIO_SYS_LED_BIT                    14" >> include/config.h
 527         @echo "#define GPIO_SYS_LED_ON                      0" >> include/config.h
 528         @echo "#define GPIO_WLAN_2G_LED_BIT                13" >> include/config.h
 529         @echo "#define GPIO_WLAN_2G_LED_ON                  0" >> include/config.h
 530         @echo "#define GPIO_USB1_LED_BIT                   11" >> include/config.h
 531         @echo "#define GPIO_USB1_LED_ON                     0" >> include/config.h
 532         @echo "#define GPIO_USB2_LED_BIT                   12" >> include/config.h
 533         @echo "#define GPIO_USB2_LED_ON                     0" >> include/config.h
 534         @echo "#define GPIO_QSS_LED_BIT                    15" >> include/config.h
 535         @echo "#define GPIO_QSS_LED_ON                      0" >> include/config.h
 536         @echo "#define GPIO_RST_BUTTON_BIT                 16" >> include/config.h
 537         @echo "#define GPIO_RST_BUTTON_IS_ACTIVE_LOW        1" >> include/config.h
 538         @echo "#define DEFAULT_FLASH_SIZE_IN_MB             8" >> include/config.h
 539         @echo "#define BOARD_CUSTOM_STRING                  \"DB120 (AR9344) U-Boot for TL-WDR3600/43x0\"" >> include/config.h
 540
 541         @./mkconfig -a db12x mips mips db12x ar7240 ar7240
 542
 543 wdr3500_config : unconfig wasp_common_config
 544         @echo '======= Configuring for TP-Link TL-WDR3500 at:' `date` '======='
 545         @echo "#define CONFIG_FOR_TPLINK_WDR3500_V1         1" >> include/config.h
 546         @echo "#define DDR2_32BIT_SUPPORT                   1" >> include/config.h
 547         @echo "#define CFG_ATHRS27_PHY                      1" >> include/config.h
 548         @echo "#define CFG_AG7240_NMACS                     2" >> include/config.h
 549         @echo "#define GPIO_SYS_LED_BIT                    14" >> include/config.h
 550         @echo "#define GPIO_SYS_LED_ON                      0" >> include/config.h
 551         @echo "#define GPIO_WLAN_2G_LED_BIT                13" >> include/config.h
 552         @echo "#define GPIO_WLAN_2G_LED_ON                  0" >> include/config.h
 553         @echo "#define GPIO_LAN1_LED_BIT                   19" >> include/config.h
 554         @echo "#define GPIO_LAN1_LED_ON                     0" >> include/config.h
 555         @echo "#define GPIO_LAN2_LED_BIT                   20" >> include/config.h
 556         @echo "#define GPIO_LAN2_LED_ON                     0" >> include/config.h
 557         @echo "#define GPIO_LAN3_LED_BIT                   21" >> include/config.h
 558         @echo "#define GPIO_LAN3_LED_ON                     0" >> include/config.h
 559         @echo "#define GPIO_LAN4_LED_BIT                   22" >> include/config.h
 560         @echo "#define GPIO_LAN4_LED_ON                     0" >> include/config.h
 561         @echo "#define GPIO_INTERNET_LED_BIT               18" >> include/config.h
 562         @echo "#define GPIO_INTERNET_LED_ON                 0" >> include/config.h
 563         @echo "#define GPIO_QSS_LED_BIT                    15" >> include/config.h
 564         @echo "#define GPIO_QSS_LED_ON                      0" >> include/config.h
 565         @echo "#define GPIO_USB_LED_BIT                    11" >> include/config.h
 566         @echo "#define GPIO_USB_LED_ON                      0" >> include/config.h
 567         @echo "#define GPIO_RST_BUTTON_BIT                 16" >> include/config.h
 568         @echo "#define GPIO_RST_BUTTON_IS_ACTIVE_LOW        1" >> include/config.h
 569         @echo "#define DEFAULT_FLASH_SIZE_IN_MB             8" >> include/config.h
 570         @echo "#define BOARD_CUSTOM_STRING                  \"DB120 (AR9344) U-Boot for TL-WDR3500\"" >> include/config.h
 571
 572         @./mkconfig -a db12x mips mips db12x ar7240 ar7240
 573
 574 mr3420_v2_config : unconfig wasp_common_config
 575         @echo '======= Configuring for TP-Link TL-MR3420 v2 at:' `date` '======='
 576         @echo "#define CONFIG_FOR_TPLINK_MR3420_V2          1" >> include/config.h
 577         @echo "#define CONFIG_AP123                         1" >> include/config.h
 578         @echo "#define DDR2_32BIT_SUPPORT                   1" >> include/config.h
 579         @echo "#define CFG_ATHRS27_PHY                      1" >> include/config.h
 580         @echo "#define CFG_AG7240_NMACS                     2" >> include/config.h
 581         @echo "#define GPIO_SYS_LED_BIT                    14" >> include/config.h
 582         @echo "#define GPIO_SYS_LED_ON                      0" >> include/config.h
 583         @echo "#define GPIO_WLAN_LED_BIT                   13" >> include/config.h
 584         @echo "#define GPIO_WLAN_LED_ON                     0" >> include/config.h
 585         @echo "#define GPIO_INTERNET_LED_BIT               18" >> include/config.h
 586         @echo "#define GPIO_INTERNET_LED_ON                 0" >> include/config.h
 587         @echo "#define GPIO_LAN1_LED_BIT                   19" >> include/config.h
 588         @echo "#define GPIO_LAN1_LED_ON                     0" >> include/config.h
 589         @echo "#define GPIO_LAN2_LED_BIT                   20" >> include/config.h
 590         @echo "#define GPIO_LAN2_LED_ON                     0" >> include/config.h
 591         @echo "#define GPIO_LAN3_LED_BIT                   21" >> include/config.h
 592         @echo "#define GPIO_LAN3_LED_ON                     0" >> include/config.h
 593         @echo "#define GPIO_LAN4_LED_BIT                   12" >> include/config.h
 594         @echo "#define GPIO_LAN4_LED_ON                     0" >> include/config.h
 595         @echo "#define GPIO_USB_LED_BIT                    11" >> include/config.h
 596         @echo "#define GPIO_USB_LED_ON                      0" >> include/config.h
 597         @echo "#define GPIO_QSS_LED_BIT                    15" >> include/config.h
 598         @echo "#define GPIO_QSS_LED_ON                      0" >> include/config.h
 599         @echo "#define GPIO_RST_BUTTON_BIT                 17" >> include/config.h
 600         @echo "#define GPIO_RST_BUTTON_IS_ACTIVE_LOW        1" >> include/config.h
 601         @echo "#define DEFAULT_FLASH_SIZE_IN_MB             4" >> include/config.h
 602         @echo "#define BOARD_CUSTOM_STRING                  \"AP123 (AR9341) U-Boot for TL-MR3420 v2\"" >> include/config.h
 603
 604         @./mkconfig -a db12x mips mips db12x ar7240 ar7240
 605
 606 wr841n_v8_config : unconfig wasp_common_config
 607         @echo '======= Configuring for TP-Link TL-WR841N/D v8 at:' `date` '======='
 608         @echo "#define CONFIG_FOR_TPLINK_WR841N_V8          1" >> include/config.h
 609         @echo "#define CONFIG_AP123                         1" >> include/config.h
 610         @echo "#define DDR2_32BIT_SUPPORT                   1" >> include/config.h
 611         @echo "#define CFG_ATHRS27_PHY                      1" >> include/config.h
 612         @echo "#define CFG_AG7240_NMACS                     2" >> include/config.h
 613         @echo "#define GPIO_SYS_LED_BIT                    14" >> include/config.h
 614         @echo "#define GPIO_SYS_LED_ON                      0" >> include/config.h
 615         @echo "#define GPIO_WLAN_LED_BIT                   13" >> include/config.h
 616         @echo "#define GPIO_WLAN_LED_ON                     0" >> include/config.h
 617         @echo "#define GPIO_INTERNET_LED_BIT               18" >> include/config.h
 618         @echo "#define GPIO_INTERNET_LED_ON                 0" >> include/config.h
 619         @echo "#define GPIO_LAN1_LED_BIT                   19" >> include/config.h
 620         @echo "#define GPIO_LAN1_LED_ON                     0" >> include/config.h
 621         @echo "#define GPIO_LAN2_LED_BIT                   20" >> include/config.h
 622         @echo "#define GPIO_LAN2_LED_ON                     0" >> include/config.h
 623         @echo "#define GPIO_LAN3_LED_BIT                   21" >> include/config.h
 624         @echo "#define GPIO_LAN3_LED_ON                     0" >> include/config.h
 625         @echo "#define GPIO_LAN4_LED_BIT                   12" >> include/config.h
 626         @echo "#define GPIO_LAN4_LED_ON                     0" >> include/config.h
 627         @echo "#define GPIO_QSS_LED_BIT                    15" >> include/config.h
 628         @echo "#define GPIO_QSS_LED_ON                      0" >> include/config.h
 629         @echo "#define GPIO_RST_BUTTON_BIT                 17" >> include/config.h
 630         @echo "#define GPIO_RST_BUTTON_IS_ACTIVE_LOW        1" >> include/config.h
 631         @echo "#define DEFAULT_FLASH_SIZE_IN_MB             4" >> include/config.h
 632         @echo "#define BOARD_CUSTOM_STRING                  \"AP123 (AR9341) U-Boot for TL-WR841N/D v8\"" >> include/config.h
 633
 634         @./mkconfig -a db12x mips mips db12x ar7240 ar7240
 635
 636 wa830re_v2_wa801nd_v2_config : unconfig wasp_common_config
 637         @echo '======= Configuring for TP-Link TL-WA830RE/TL-WA801ND v2 at:' `date` '======='
 638         @echo "#define CONFIG_FOR_TPLINK_WA830RE_V2_WA801ND_V2 1" >> include/config.h
 639         @echo "#define CONFIG_AP123                            1" >> include/config.h
 640         @echo "#define DDR2_32BIT_SUPPORT                      1" >> include/config.h
 641         @echo "#define CFG_ATHRS27_PHY                         1" >> include/config.h
 642         @echo "#define CFG_AG7240_NMACS                        2" >> include/config.h
 643         @echo "#define GPIO_SYS_LED_BIT                       14" >> include/config.h
 644         @echo "#define GPIO_SYS_LED_ON                         0" >> include/config.h
 645         @echo "#define GPIO_LAN_LED_BIT                       18" >> include/config.h
 646         @echo "#define GPIO_LAN_LED_ON                         0" >> include/config.h
 647         @echo "#define GPIO_WLAN_LED_BIT                      13" >> include/config.h
 648         @echo "#define GPIO_WLAN_LED_ON                        0" >> include/config.h
 649         @echo "#define GPIO_QSS_LED_BIT                       15" >> include/config.h
 650         @echo "#define GPIO_QSS_LED_ON                         0" >> include/config.h
 651         @echo "#define GPIO_RST_BUTTON_BIT                    17" >> include/config.h
 652         @echo "#define GPIO_RST_BUTTON_IS_ACTIVE_LOW           1" >> include/config.h
 653         @echo "#define DEFAULT_FLASH_SIZE_IN_MB                4" >> include/config.h
 654         @echo "#define BOARD_CUSTOM_STRING                     \"AP123 (AR9341) U-Boot for TL-WA830RE/TL-WA801ND v2\"" >> include/config.h
 655
 656         @./mkconfig -a db12x mips mips db12x ar7240 ar7240
 657
 658 #########################################################################
 659 #########################################################################
 660 #########################################################################
 661
 662 clean:
 663         @echo Making $@
 664         @find . -type f \
 665                 \( -name 'core' -o -name '*.bak' -o -name '*~' \
 666                 -o -name '*.o'  -o -name '*.a' -o -name .depend \) -print \
 667                 | xargs rm -f
 668         @rm -f tools/mkimage tools/envcrc
 669         @rm -f lib_bootstrap/*.o
 670         @rm -f lib_bootstrap/*.a
 671         @rm -f bootstrap bootstrap.bin tuboot.bin u-boot.lzimg u-boot.bin.lzma bootstrap.map
 672
 673 clobber:        clean
 674         @echo Making $@
 675         @find . -type f \( -name .depend \
 676                 -o -name '*.srec' -o -name '*.bin' -o -name u-boot.img \) \
 677                 -print0 \
 678                 | xargs -0 rm -f
 679         @rm -f $(OBJS) *.bak tags TAGS include/version_autogenerated.h
 680         @rm -fr *.*~
 681         @rm -f u-boot u-boot.map u-boot.hex $(ALL)
 682         @rm -f tools/crc32.c tools/environment.c
 683         @rm -f cpu/mpc824x/bedbug_603e.c
 684         @rm -f include/asm/proc include/asm/arch include/asm
 685
 686 mrproper \
 687 distclean:      clobber unconfig
 688
 689 backup:
 690         F=`basename $(TOPDIR)` ; cd .. ; \
 691         gtar --force-local -zcvf `date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
 692
 693 #########################################################################