1 # SPDX-License-Identifier: GPL-2.0+
2 # Copyright (c) 2013 The Chromium OS Authors.
4 (Please read 'How to change from MAKEALL' if you are used to that tool)
9 If you just want to quickly set up buildman so you can build something (for
10 example Raspberry Pi 2):
13 PATH=$PATH:`pwd`/tools/buildman
14 buildman --fetch-arch arm
17 # u-boot.bin is the output image
23 This tool handles building U-Boot to check that you have not broken it
24 with your patch series. It can build each individual commit and report
25 which boards fail on which commits, and which errors come up. It aims
26 to make full use of multi-processor machines.
28 A key feature of buildman is its output summary, which allows warnings,
29 errors or image size increases in a particular commit or board to be
30 quickly identified and the offending commit pinpointed. This can be a big
31 help for anyone working with >10 patches at a time.
37 Buildman can be stopped and restarted, in which case it will continue
38 where it left off. This should happen cleanly and without side-effects.
39 If not, it is a bug, for which a patch would be welcome.
41 Buildman gets so tied up in its work that it can ignore the outside world.
42 You may need to press Ctrl-C several times to quit it. Also it will print
43 out various exceptions when stopped. You may have to kill it since the
44 Ctrl-C handling is somewhat broken.
50 (please read this section in full twice or you will be perpetually confused)
52 Buildman is a builder. It is not make, although it runs make. It does not
53 produce any useful output on the terminal while building, except for
54 progress information (but see -v below). All the output (errors, warnings and
55 binaries if you ask for them) is stored in output directories, which you can
56 look at from a separate 'buildman -s' instance while the build is progressing,
57 or when it is finished.
59 Buildman is designed to build entire git branches, i.e. muliple commits. It
60 can be run repeatedly on the same branch after making changes to commits on
61 that branch. In this case it will automatically rebuild commits which have
62 changed (and remove its old results for that commit). It is possible to build
63 a branch for one board, then later build it for another board. This adds to
64 the output, so now you have results for two boards. If you want buildman to
65 re-build a commit it has already built (e.g. because of a toolchain update),
68 Buildman produces a concise summary of which boards succeeded and failed.
69 It shows which commit introduced which board failure using a simple
70 red/green colour coding (with yellow/cyan for warnings). Full error
71 information can be requested, in which case it is de-duped and displayed
72 against the commit that introduced the error. An example workflow is below.
74 Buildman stores image size information and can report changes in image size
75 from commit to commit. An example of this is below.
77 Buildman starts multiple threads, and each thread builds for one board at
78 a time. A thread starts at the first commit, configures the source for your
79 board and builds it. Then it checks out the next commit and does an
80 incremental build (i.e. not using 'make xxx_defconfig' unless you use -C).
81 Eventually the thread reaches the last commit and stops. If a commit causes
82 an error or warning, buildman will try it again after reconfiguring (but see
83 -Q). Thus some commits may be built twice, with the first result silently
84 discarded. Lots of errors and warnings will causes lots of reconfigures and your
85 build will be very slow. This is because a file that produces just a warning
86 would not normally be rebuilt in an incremental build. Once a thread finishes
87 building all the commits for a board, it starts on the commits for another
90 Buildman works in an entirely separate place from your U-Boot repository.
91 It creates a separate working directory for each thread, and puts the
92 output files in the working directory, organised by commit name and board
93 name, in a two-level hierarchy (but see -P).
95 Buildman is invoked in your U-Boot directory, the one with the .git
96 directory. It clones this repository into a copy for each thread, and the
97 threads do not affect the state of your git repository. Any checkouts done
98 by the thread affect only the working directory for that thread.
100 Buildman automatically selects the correct tool chain for each board. You
101 must supply suitable tool chains (see --fetch-arch), but buildman takes care
102 of selecting the right one.
104 Buildman generally builds a branch (with the -b flag), and in this case
105 builds the upstream commit as well, for comparison. So even if you have one
106 commit in your branch, two commits will be built. Put all your commits in a
107 branch, set the branch's upstream to a valid value, and all will be well.
108 Otherwise buildman will perform random actions. Use -n to check what the
109 random actions might be.
111 Buildman effectively has two modes: without -s it builds, with -s it
112 summarises the results of previous (or active) builds.
114 If you just want to build the current source tree, leave off the -b flag.
115 This will display results and errors as they happen. You can still look at
116 them later using -se. Note that buildman will assume that the source has
117 changed, and will build all specified boards in this case.
119 Buildman is optimised for building many commits at once, for many boards.
120 On multi-core machines, Buildman is fast because it uses most of the
121 available CPU power. When it gets to the end, or if you are building just
122 a few commits or boards, it will be pretty slow. As a tip, if you don't
123 plan to use your machine for anything else, you can use -T to increase the
124 number of threads beyond the default.
127 Selecting which boards to build
128 ===============================
130 Buildman lets you build all boards, or a subset. Specify the subset by passing
131 command-line arguments that list the desired board name, architecture name,
132 SOC name, or anything else in the boards.cfg file. Multiple arguments are
133 allowed. Each argument will be interpreted as a regular expression, so
134 behaviour is a superset of exact or substring matching. Examples are:
136 * 'tegra20' All boards with a Tegra20 SoC
137 * 'tegra' All boards with any Tegra Soc (Tegra20, Tegra30, Tegra114...)
138 * '^tegra[23]0$' All boards with either Tegra20 or Tegra30 SoC
139 * 'powerpc' All PowerPC boards
141 While the default is to OR the terms together, you can also make use of
142 the '&' operator to limit the selection:
144 * 'freescale & arm sandbox' All Freescale boards with ARM architecture,
147 You can also use -x to specifically exclude some boards. For example:
149 buildman arm -x nvidia,freescale,.*ball$
151 means to build all arm boards except nvidia, freescale and anything ending
154 For building specific boards you can use the --boards (or --bo) option, which
155 takes a comma-separated list of board target names and be used multiple times
158 buildman --boards sandbox,snow --boards
160 It is convenient to use the -n option to see what will be built based on
161 the subset given. Use -v as well to get an actual list of boards.
163 Buildman does not store intermediate object files. It optionally copies
164 the binary output into a directory when a build is successful (-k). Size
165 information is always recorded. It needs a fair bit of disk space to work,
166 typically 250MB per thread.
172 1. Get the U-Boot source. You probably already have it, but if not these
173 steps should get you started with a repo and some commits for testing.
176 $ git clone git://git.denx.de/u-boot.git .
177 $ git checkout -b my-branch origin/master
178 $ # Add some commits to the branch, reading for testing
180 2. Create ~/.buildman to tell buildman where to find tool chains (see 'The
181 .buildman file' later for details). As an example:
183 # Buildman settings file
189 arm: /opt/linaro/gcc-linaro-arm-linux-gnueabihf-4.8-2013.08_linux
190 aarch64: /opt/linaro/gcc-linaro-aarch64-none-elf-4.8-2013.10_linux
199 This selects the available toolchain paths. Add the base directory for
200 each of your toolchains here. Buildman will search inside these directories
201 and also in any '/usr' and '/usr/bin' subdirectories.
203 Make sure the tags (here root: rest: and eldk:) are unique.
205 The toolchain-alias section indicates that the i386 toolchain should be used
206 to build x86 commits.
208 Note that you can also specific exactly toolchain prefixes if you like:
211 arm: /opt/arm-eabi-4.6/bin/arm-eabi-
216 arm: /opt/arm-eabi-4.6/bin/arm-eabi-gcc
218 This tells buildman that you want to use this exact toolchain for the arm
219 architecture. This will override any toolchains found by searching using the
220 [toolchain] settings.
222 Since the toolchain prefix is an explicit request, buildman will report an
223 error if a toolchain is not found with that prefix. The current PATH will be
224 searched, so it is possible to use:
229 and buildman will find arm-none-eabi-gcc in /usr/bin if you have it installed.
234 This tells buildman to use a compiler wrapper in front of CROSS_COMPILE. In
235 this example, ccache. It doesn't affect the toolchain scan. The wrapper is
236 added when CROSS_COMPILE environtal variable is set. The name in this
237 section is ignored. If more than one line is provided, only the last one
240 3. Make sure you have the require Python pre-requisites
242 Buildman uses multiprocessing, Queue, shutil, StringIO, ConfigParser and
243 urllib2. These should normally be available, but if you get an error like
244 this then you will need to obtain those modules:
246 ImportError: No module named multiprocessing
249 4. Check the available toolchains
251 Run this check to make sure that you have a toolchain for every architecture.
253 $ ./tools/buildman/buildman --list-tool-chains
254 Scanning for tool chains
255 - scanning prefix '/opt/gcc-4.6.3-nolibc/x86_64-linux/bin/x86_64-linux-'
256 Tool chain test: OK, arch='x86', priority 1
257 - scanning prefix '/opt/arm-eabi-4.6/bin/arm-eabi-'
258 Tool chain test: OK, arch='arm', priority 1
259 - scanning path '/toolchains/gcc-4.9.0-nolibc/i386-linux'
260 - looking in '/toolchains/gcc-4.9.0-nolibc/i386-linux/.'
261 - looking in '/toolchains/gcc-4.9.0-nolibc/i386-linux/bin'
262 - found '/toolchains/gcc-4.9.0-nolibc/i386-linux/bin/i386-linux-gcc'
263 - looking in '/toolchains/gcc-4.9.0-nolibc/i386-linux/usr/bin'
264 Tool chain test: OK, arch='i386', priority 4
265 - scanning path '/toolchains/gcc-4.9.0-nolibc/aarch64-linux'
266 - looking in '/toolchains/gcc-4.9.0-nolibc/aarch64-linux/.'
267 - looking in '/toolchains/gcc-4.9.0-nolibc/aarch64-linux/bin'
268 - found '/toolchains/gcc-4.9.0-nolibc/aarch64-linux/bin/aarch64-linux-gcc'
269 - looking in '/toolchains/gcc-4.9.0-nolibc/aarch64-linux/usr/bin'
270 Tool chain test: OK, arch='aarch64', priority 4
271 - scanning path '/toolchains/gcc-4.9.0-nolibc/microblaze-linux'
272 - looking in '/toolchains/gcc-4.9.0-nolibc/microblaze-linux/.'
273 - looking in '/toolchains/gcc-4.9.0-nolibc/microblaze-linux/bin'
274 - found '/toolchains/gcc-4.9.0-nolibc/microblaze-linux/bin/microblaze-linux-gcc'
275 - looking in '/toolchains/gcc-4.9.0-nolibc/microblaze-linux/usr/bin'
276 Tool chain test: OK, arch='microblaze', priority 4
277 - scanning path '/toolchains/gcc-4.9.0-nolibc/mips64-linux'
278 - looking in '/toolchains/gcc-4.9.0-nolibc/mips64-linux/.'
279 - looking in '/toolchains/gcc-4.9.0-nolibc/mips64-linux/bin'
280 - found '/toolchains/gcc-4.9.0-nolibc/mips64-linux/bin/mips64-linux-gcc'
281 - looking in '/toolchains/gcc-4.9.0-nolibc/mips64-linux/usr/bin'
282 Tool chain test: OK, arch='mips64', priority 4
283 - scanning path '/toolchains/gcc-4.9.0-nolibc/sparc64-linux'
284 - looking in '/toolchains/gcc-4.9.0-nolibc/sparc64-linux/.'
285 - looking in '/toolchains/gcc-4.9.0-nolibc/sparc64-linux/bin'
286 - found '/toolchains/gcc-4.9.0-nolibc/sparc64-linux/bin/sparc64-linux-gcc'
287 - looking in '/toolchains/gcc-4.9.0-nolibc/sparc64-linux/usr/bin'
288 Tool chain test: OK, arch='sparc64', priority 4
289 - scanning path '/toolchains/gcc-4.9.0-nolibc/arm-unknown-linux-gnueabi'
290 - looking in '/toolchains/gcc-4.9.0-nolibc/arm-unknown-linux-gnueabi/.'
291 - looking in '/toolchains/gcc-4.9.0-nolibc/arm-unknown-linux-gnueabi/bin'
292 - found '/toolchains/gcc-4.9.0-nolibc/arm-unknown-linux-gnueabi/bin/arm-unknown-linux-gnueabi-gcc'
293 - looking in '/toolchains/gcc-4.9.0-nolibc/arm-unknown-linux-gnueabi/usr/bin'
294 Tool chain test: OK, arch='arm', priority 3
295 Toolchain '/toolchains/gcc-4.9.0-nolibc/arm-unknown-linux-gnueabi/bin/arm-unknown-linux-gnueabi-gcc' at priority 3 will be ignored because another toolchain for arch 'arm' has priority 1
296 - scanning path '/toolchains/gcc-4.9.0-nolibc/sparc-linux'
297 - looking in '/toolchains/gcc-4.9.0-nolibc/sparc-linux/.'
298 - looking in '/toolchains/gcc-4.9.0-nolibc/sparc-linux/bin'
299 - found '/toolchains/gcc-4.9.0-nolibc/sparc-linux/bin/sparc-linux-gcc'
300 - looking in '/toolchains/gcc-4.9.0-nolibc/sparc-linux/usr/bin'
301 Tool chain test: OK, arch='sparc', priority 4
302 - scanning path '/toolchains/gcc-4.9.0-nolibc/mips-linux'
303 - looking in '/toolchains/gcc-4.9.0-nolibc/mips-linux/.'
304 - looking in '/toolchains/gcc-4.9.0-nolibc/mips-linux/bin'
305 - found '/toolchains/gcc-4.9.0-nolibc/mips-linux/bin/mips-linux-gcc'
306 - looking in '/toolchains/gcc-4.9.0-nolibc/mips-linux/usr/bin'
307 Tool chain test: OK, arch='mips', priority 4
308 - scanning path '/toolchains/gcc-4.9.0-nolibc/x86_64-linux'
309 - looking in '/toolchains/gcc-4.9.0-nolibc/x86_64-linux/.'
310 - looking in '/toolchains/gcc-4.9.0-nolibc/x86_64-linux/bin'
311 - found '/toolchains/gcc-4.9.0-nolibc/x86_64-linux/bin/x86_64-linux-gcc'
312 - found '/toolchains/gcc-4.9.0-nolibc/x86_64-linux/bin/x86_64-linux-x86_64-linux-gcc'
313 - looking in '/toolchains/gcc-4.9.0-nolibc/x86_64-linux/usr/bin'
314 Tool chain test: OK, arch='x86_64', priority 4
315 Tool chain test: OK, arch='x86_64', priority 4
316 Toolchain '/toolchains/gcc-4.9.0-nolibc/x86_64-linux/bin/x86_64-linux-x86_64-linux-gcc' at priority 4 will be ignored because another toolchain for arch 'x86_64' has priority 4
317 - scanning path '/toolchains/gcc-4.9.0-nolibc/m68k-linux'
318 - looking in '/toolchains/gcc-4.9.0-nolibc/m68k-linux/.'
319 - looking in '/toolchains/gcc-4.9.0-nolibc/m68k-linux/bin'
320 - found '/toolchains/gcc-4.9.0-nolibc/m68k-linux/bin/m68k-linux-gcc'
321 - looking in '/toolchains/gcc-4.9.0-nolibc/m68k-linux/usr/bin'
322 Tool chain test: OK, arch='m68k', priority 4
323 - scanning path '/toolchains/gcc-4.9.0-nolibc/powerpc-linux'
324 - looking in '/toolchains/gcc-4.9.0-nolibc/powerpc-linux/.'
325 - looking in '/toolchains/gcc-4.9.0-nolibc/powerpc-linux/bin'
326 - found '/toolchains/gcc-4.9.0-nolibc/powerpc-linux/bin/powerpc-linux-gcc'
327 - looking in '/toolchains/gcc-4.9.0-nolibc/powerpc-linux/usr/bin'
328 Tool chain test: OK, arch='powerpc', priority 4
329 - scanning path '/toolchains/gcc-4.6.3-nolibc/bfin-uclinux'
330 - looking in '/toolchains/gcc-4.6.3-nolibc/bfin-uclinux/.'
331 - looking in '/toolchains/gcc-4.6.3-nolibc/bfin-uclinux/bin'
332 - found '/toolchains/gcc-4.6.3-nolibc/bfin-uclinux/bin/bfin-uclinux-gcc'
333 - looking in '/toolchains/gcc-4.6.3-nolibc/bfin-uclinux/usr/bin'
334 Tool chain test: OK, arch='bfin', priority 6
335 - scanning path '/toolchains/gcc-4.6.3-nolibc/sparc-linux'
336 - looking in '/toolchains/gcc-4.6.3-nolibc/sparc-linux/.'
337 - looking in '/toolchains/gcc-4.6.3-nolibc/sparc-linux/bin'
338 - found '/toolchains/gcc-4.6.3-nolibc/sparc-linux/bin/sparc-linux-gcc'
339 - looking in '/toolchains/gcc-4.6.3-nolibc/sparc-linux/usr/bin'
340 Tool chain test: OK, arch='sparc', priority 4
341 Toolchain '/toolchains/gcc-4.6.3-nolibc/sparc-linux/bin/sparc-linux-gcc' at priority 4 will be ignored because another toolchain for arch 'sparc' has priority 4
342 - scanning path '/toolchains/gcc-4.6.3-nolibc/mips-linux'
343 - looking in '/toolchains/gcc-4.6.3-nolibc/mips-linux/.'
344 - looking in '/toolchains/gcc-4.6.3-nolibc/mips-linux/bin'
345 - found '/toolchains/gcc-4.6.3-nolibc/mips-linux/bin/mips-linux-gcc'
346 - looking in '/toolchains/gcc-4.6.3-nolibc/mips-linux/usr/bin'
347 Tool chain test: OK, arch='mips', priority 4
348 Toolchain '/toolchains/gcc-4.6.3-nolibc/mips-linux/bin/mips-linux-gcc' at priority 4 will be ignored because another toolchain for arch 'mips' has priority 4
349 - scanning path '/toolchains/gcc-4.6.3-nolibc/m68k-linux'
350 - looking in '/toolchains/gcc-4.6.3-nolibc/m68k-linux/.'
351 - looking in '/toolchains/gcc-4.6.3-nolibc/m68k-linux/bin'
352 - found '/toolchains/gcc-4.6.3-nolibc/m68k-linux/bin/m68k-linux-gcc'
353 - looking in '/toolchains/gcc-4.6.3-nolibc/m68k-linux/usr/bin'
354 Tool chain test: OK, arch='m68k', priority 4
355 Toolchain '/toolchains/gcc-4.6.3-nolibc/m68k-linux/bin/m68k-linux-gcc' at priority 4 will be ignored because another toolchain for arch 'm68k' has priority 4
356 - scanning path '/toolchains/gcc-4.6.3-nolibc/powerpc-linux'
357 - looking in '/toolchains/gcc-4.6.3-nolibc/powerpc-linux/.'
358 - looking in '/toolchains/gcc-4.6.3-nolibc/powerpc-linux/bin'
359 - found '/toolchains/gcc-4.6.3-nolibc/powerpc-linux/bin/powerpc-linux-gcc'
360 - looking in '/toolchains/gcc-4.6.3-nolibc/powerpc-linux/usr/bin'
361 Tool chain test: OK, arch='powerpc', priority 4
362 Tool chain test: OK, arch='or32', priority 4
366 - looking in '/usr/bin'
367 - found '/usr/bin/i586-mingw32msvc-gcc'
368 - found '/usr/bin/c89-gcc'
369 - found '/usr/bin/x86_64-linux-gnu-gcc'
370 - found '/usr/bin/gcc'
371 - found '/usr/bin/c99-gcc'
372 - found '/usr/bin/arm-linux-gnueabi-gcc'
373 - found '/usr/bin/aarch64-linux-gnu-gcc'
374 - found '/usr/bin/winegcc'
375 - found '/usr/bin/arm-linux-gnueabihf-gcc'
376 Tool chain test: OK, arch='i586', priority 11
377 Tool chain test: OK, arch='c89', priority 11
378 Tool chain test: OK, arch='x86_64', priority 4
379 Toolchain '/usr/bin/x86_64-linux-gnu-gcc' at priority 4 will be ignored because another toolchain for arch 'x86_64' has priority 4
380 Tool chain test: OK, arch='sandbox', priority 11
381 Tool chain test: OK, arch='c99', priority 11
382 Tool chain test: OK, arch='arm', priority 4
383 Toolchain '/usr/bin/arm-linux-gnueabi-gcc' at priority 4 will be ignored because another toolchain for arch 'arm' has priority 1
384 Tool chain test: OK, arch='aarch64', priority 4
385 Toolchain '/usr/bin/aarch64-linux-gnu-gcc' at priority 4 will be ignored because another toolchain for arch 'aarch64' has priority 4
386 Tool chain test: OK, arch='sandbox', priority 11
387 Toolchain '/usr/bin/winegcc' at priority 11 will be ignored because another toolchain for arch 'sandbox' has priority 11
388 Tool chain test: OK, arch='arm', priority 4
389 Toolchain '/usr/bin/arm-linux-gnueabihf-gcc' at priority 4 will be ignored because another toolchain for arch 'arm' has priority 1
390 List of available toolchains (34):
391 aarch64 : /toolchains/gcc-4.9.0-nolibc/aarch64-linux/bin/aarch64-linux-gcc
392 alpha : /toolchains/gcc-4.9.0-nolibc/alpha-linux/bin/alpha-linux-gcc
393 am33_2.0 : /toolchains/gcc-4.9.0-nolibc/am33_2.0-linux/bin/am33_2.0-linux-gcc
394 arm : /opt/arm-eabi-4.6/bin/arm-eabi-gcc
395 bfin : /toolchains/gcc-4.6.3-nolibc/bfin-uclinux/bin/bfin-uclinux-gcc
396 c89 : /usr/bin/c89-gcc
397 c99 : /usr/bin/c99-gcc
398 frv : /toolchains/gcc-4.9.0-nolibc/frv-linux/bin/frv-linux-gcc
399 h8300 : /toolchains/gcc-4.9.0-nolibc/h8300-elf/bin/h8300-elf-gcc
400 hppa : /toolchains/gcc-4.9.0-nolibc/hppa-linux/bin/hppa-linux-gcc
401 hppa64 : /toolchains/gcc-4.9.0-nolibc/hppa64-linux/bin/hppa64-linux-gcc
402 i386 : /toolchains/gcc-4.9.0-nolibc/i386-linux/bin/i386-linux-gcc
403 i586 : /usr/bin/i586-mingw32msvc-gcc
404 ia64 : /toolchains/gcc-4.9.0-nolibc/ia64-linux/bin/ia64-linux-gcc
405 m32r : /toolchains/gcc-4.9.0-nolibc/m32r-linux/bin/m32r-linux-gcc
406 m68k : /toolchains/gcc-4.9.0-nolibc/m68k-linux/bin/m68k-linux-gcc
407 microblaze: /toolchains/gcc-4.9.0-nolibc/microblaze-linux/bin/microblaze-linux-gcc
408 mips : /toolchains/gcc-4.9.0-nolibc/mips-linux/bin/mips-linux-gcc
409 mips64 : /toolchains/gcc-4.9.0-nolibc/mips64-linux/bin/mips64-linux-gcc
410 or32 : /toolchains/gcc-4.5.1-nolibc/or32-linux/bin/or32-linux-gcc
411 powerpc : /toolchains/gcc-4.9.0-nolibc/powerpc-linux/bin/powerpc-linux-gcc
412 powerpc64 : /toolchains/gcc-4.9.0-nolibc/powerpc64-linux/bin/powerpc64-linux-gcc
413 ppc64le : /toolchains/gcc-4.9.0-nolibc/ppc64le-linux/bin/ppc64le-linux-gcc
414 s390x : /toolchains/gcc-4.9.0-nolibc/s390x-linux/bin/s390x-linux-gcc
415 sandbox : /usr/bin/gcc
416 sh4 : /toolchains/gcc-4.6.3-nolibc/sh4-linux/bin/sh4-linux-gcc
417 sparc : /toolchains/gcc-4.9.0-nolibc/sparc-linux/bin/sparc-linux-gcc
418 sparc64 : /toolchains/gcc-4.9.0-nolibc/sparc64-linux/bin/sparc64-linux-gcc
419 tilegx : /toolchains/gcc-4.6.2-nolibc/tilegx-linux/bin/tilegx-linux-gcc
420 x86 : /opt/gcc-4.6.3-nolibc/x86_64-linux/bin/x86_64-linux-gcc
421 x86_64 : /toolchains/gcc-4.9.0-nolibc/x86_64-linux/bin/x86_64-linux-gcc
424 You can see that everything is covered, even some strange ones that won't
425 be used (c88 and c99). This is a feature.
428 5. Install new toolchains if needed
430 You can download toolchains and update the [toolchain] section of the
431 settings file to find them.
433 To make this easier, buildman can automatically download and install
434 toolchains from kernel.org. First list the available architectures:
436 $ ./tools/buildman/buildman --fetch-arch list
437 Checking: https://www.kernel.org/pub/tools/crosstool/files/bin/x86_64/4.6.3/
438 Checking: https://www.kernel.org/pub/tools/crosstool/files/bin/x86_64/4.6.2/
439 Checking: https://www.kernel.org/pub/tools/crosstool/files/bin/x86_64/4.5.1/
440 Checking: https://www.kernel.org/pub/tools/crosstool/files/bin/x86_64/4.2.4/
441 Available architectures: alpha am33_2.0 arm bfin cris crisv32 frv h8300
442 hppa hppa64 i386 ia64 m32r m68k mips mips64 or32 powerpc powerpc64 s390x sh4
443 sparc sparc64 tilegx x86_64 xtensa
445 Then pick one and download it:
447 $ ./tools/buildman/buildman --fetch-arch or32
448 Checking: https://www.kernel.org/pub/tools/crosstool/files/bin/x86_64/4.6.3/
449 Checking: https://www.kernel.org/pub/tools/crosstool/files/bin/x86_64/4.6.2/
450 Checking: https://www.kernel.org/pub/tools/crosstool/files/bin/x86_64/4.5.1/
451 Downloading: https://www.kernel.org/pub/tools/crosstool/files/bin/x86_64/4.5.1//x86_64-gcc-4.5.1-nolibc_or32-linux.tar.xz
452 Unpacking to: /home/sjg/.buildman-toolchains
454 - looking in '/home/sjg/.buildman-toolchains/gcc-4.5.1-nolibc/or32-linux/.'
455 - looking in '/home/sjg/.buildman-toolchains/gcc-4.5.1-nolibc/or32-linux/bin'
456 - found '/home/sjg/.buildman-toolchains/gcc-4.5.1-nolibc/or32-linux/bin/or32-linux-gcc'
459 Or download them all from kernel.org and move them to /toolchains directory,
461 $ ./tools/buildman/buildman --fetch-arch all
462 $ sudo mkdir -p /toolchains
463 $ sudo mv ~/.buildman-toolchains/*/* /toolchains/
465 For those not available from kernel.org, download from the following links.
467 arc: https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/releases/
468 download/arc-2016.09-release/arc_gnu_2016.09_prebuilt_uclibc_le_archs_linux_install.tar.gz
469 blackfin: http://sourceforge.net/projects/adi-toolchain/files/
470 blackfin-toolchain-elf-gcc-4.5-2014R1_45-RC2.x86_64.tar.bz2
471 nds32: http://osdk.andestech.com/packages/
472 nds32le-linux-glibc-v1.tgz
473 nios2: http://sourcery.mentor.com/public/gnu_toolchain/nios2-linux-gnu/
474 sourceryg++-2015.11-27-nios2-linux-gnu-i686-pc-linux-gnu.tar.bz2
475 sh: http://sourcery.mentor.com/public/gnu_toolchain/sh-linux-gnu/
476 renesas-4.4-200-sh-linux-gnu-i686-pc-linux-gnu.tar.bz2
478 Note openrisc kernel.org toolchain is out of date. Download the latest one from
479 http://opencores.org/or1k/OpenRISC_GNU_tool_chain#Prebuilt_versions - eg:
480 ftp://ocuser:ocuser@openrisc.opencores.org/toolchain/gcc-or1k-elf-4.8.1-x86.tar.bz2.
482 Buildman should now be set up to use your new toolchain.
484 At the time of writing, U-Boot has these architectures:
486 arc, arm, blackfin, m68k, microblaze, mips, nds32, nios2, openrisc
487 powerpc, sandbox, sh, sparc, x86
489 Of these, only arc and nds32 are not available at kernel.org..
495 First do a dry run using the -n flag: (replace <branch> with a real, local
496 branch with a valid upstream)
498 $ ./tools/buildman/buildman -b <branch> -n
500 If it can't detect the upstream branch, try checking out the branch, and
501 doing something like 'git branch --set-upstream-to upstream/master'
502 or something similar. Buildman will try to guess a suitable upstream branch
503 if it can't find one (you will see a message like" Guessing upstream as ...).
507 Dry run, so not doing much. But I would do this:
509 Building 18 commits for 1059 boards (4 threads, 1 job per thread)
510 Build directory: ../lcd9b
511 5bb3505 Merge branch 'master' of git://git.denx.de/u-boot-arm
512 c18f1b4 tegra: Use const for pinmux_config_pingroup/table()
513 2f043ae tegra: Add display support to funcmux
514 e349900 tegra: fdt: Add pwm binding and node
515 424a5f0 tegra: fdt: Add LCD definitions for Tegra
516 0636ccf tegra: Add support for PWM
517 a994fe7 tegra: Add SOC support for display/lcd
518 fcd7350 tegra: Add LCD driver
519 4d46e9d tegra: Add LCD support to Nvidia boards
520 991bd48 arm: Add control over cachability of memory regions
521 54e8019 lcd: Add CONFIG_LCD_ALIGNMENT to select frame buffer alignment
522 d92aff7 lcd: Add support for flushing LCD fb from dcache after update
523 dbd0677 tegra: Align LCD frame buffer to section boundary
524 0cff9b8 tegra: Support control of cache settings for LCD
525 9c56900 tegra: fdt: Add LCD definitions for Seaboard
526 5cc29db lcd: Add CONFIG_CONSOLE_SCROLL_LINES option to speed console
527 cac5a23 tegra: Enable display/lcd support on Seaboard
530 Total boards to build for each commit: 1059
532 This shows that it will build all 1059 boards, using 4 threads (because
533 we have a 4-core CPU). Each thread will run with -j1, meaning that each
534 make job will use a single CPU. The list of commits to be built helps you
535 confirm that things look about right. Notice that buildman has chosen a
536 'base' directory for you, immediately above your source tree.
538 Buildman works entirely inside the base directory, here ../lcd9b,
539 creating a working directory for each thread, and creating output
540 directories for each commit and board.
546 To run the build for real, take off the -n:
548 $ ./tools/buildman/buildman -b <branch>
550 Buildman will set up some working directories, and get started. After a
551 minute or so it will settle down to a steady pace, with a display like this:
553 Building 18 commits for 1059 boards (4 threads, 1 job per thread)
554 528 36 124 /19062 1:13:30 : SIMPC8313_SP
556 This means that it is building 19062 board/commit combinations. So far it
557 has managed to successfully build 528. Another 36 have built with warnings,
558 and 124 more didn't build at all. Buildman expects to complete the process
559 in around an hour and a quarter. Use this time to buy a faster computer.
562 To find out how the build went, ask for a summary with -s. You can do this
563 either before the build completes (presumably in another terminal) or
564 afterwards. Let's work through an example of how this is used:
566 $ ./tools/buildman/buildman -b lcd9b -s
568 01: Merge branch 'master' of git://git.denx.de/u-boot-arm
569 powerpc: + galaxy5200_LOWBOOT
570 02: tegra: Use const for pinmux_config_pingroup/table()
571 03: tegra: Add display support to funcmux
572 04: tegra: fdt: Add pwm binding and node
573 05: tegra: fdt: Add LCD definitions for Tegra
574 06: tegra: Add support for PWM
575 07: tegra: Add SOC support for display/lcd
576 08: tegra: Add LCD driver
577 09: tegra: Add LCD support to Nvidia boards
578 10: arm: Add control over cachability of memory regions
579 11: lcd: Add CONFIG_LCD_ALIGNMENT to select frame buffer alignment
580 12: lcd: Add support for flushing LCD fb from dcache after update
582 13: tegra: Align LCD frame buffer to section boundary
583 14: tegra: Support control of cache settings for LCD
584 15: tegra: fdt: Add LCD definitions for Seaboard
585 16: lcd: Add CONFIG_CONSOLE_SCROLL_LINES option to speed console
586 17: tegra: Enable display/lcd support on Seaboard
589 This shows which commits have succeeded and which have failed. In this case
590 the build is still in progress so many boards are not built yet (use -u to
591 see which ones). But still we can see a few failures. The galaxy5200_LOWBOOT
592 never builds correctly. This could be a problem with our toolchain, or it
593 could be a bug in the upstream. The good news is that we probably don't need
594 to blame our commits. The bad news is that our commits are not tested on that
597 Commit 12 broke lubbock. That's what the '+ lubbock' means. The failure
598 is never fixed by a later commit, or you would see lubbock again, in green,
601 To see the actual error:
603 $ ./tools/buildman/buildman -b <branch> -se lubbock
605 12: lcd: Add support for flushing LCD fb from dcache after update
607 +common/libcommon.o: In function `lcd_sync':
608 +/u-boot/lcd9b/.bm-work/00/common/lcd.c:120: undefined reference to `flush_dcache_range'
609 +arm-none-linux-gnueabi-ld: BFD (Sourcery G++ Lite 2010q1-202) 2.19.51.20090709 assertion fail /scratch/julian/2010q1-release-linux-lite/obj/binutils-src-2010q1-202-arm-none-linux-gnueabi-i686-pc-linux-gnu/bfd/elf32-arm.c:12572
610 +make: *** [/u-boot/lcd9b/.bm-work/00/build/u-boot] Error 139
611 13: tegra: Align LCD frame buffer to section boundary
612 14: tegra: Support control of cache settings for LCD
613 15: tegra: fdt: Add LCD definitions for Seaboard
614 16: lcd: Add CONFIG_CONSOLE_SCROLL_LINES option to speed console
615 -/u-boot/lcd9b/.bm-work/00/common/lcd.c:120: undefined reference to `flush_dcache_range'
616 +/u-boot/lcd9b/.bm-work/00/common/lcd.c:125: undefined reference to `flush_dcache_range'
617 17: tegra: Enable display/lcd support on Seaboard
620 So the problem is in lcd.c, due to missing cache operations. This information
621 should be enough to work out what that commit is doing to break these
622 boards. (In this case pxa did not have cache operations defined).
624 If you see error lines marked with '-', that means that the errors were fixed
625 by that commit. Sometimes commits can be in the wrong order, so that a
626 breakage is introduced for a few commits and fixed by later commits. This
627 shows up clearly with buildman. You can then reorder the commits and try
630 At commit 16, the error moves: you can see that the old error at line 120
631 is fixed, but there is a new one at line 126. This is probably only because
632 we added some code and moved the broken line further down the file.
634 If many boards have the same error, then -e will display the error only
635 once. This makes the output as concise as possible. To see which boards have
636 each error, use -l. So it is safe to omit the board name - you will not get
637 lots of repeated output for every board.
639 Buildman tries to distinguish warnings from errors, and shows warning lines
640 separately with a 'w' prefix.
642 The full build output in this case is available in:
644 ../lcd9b/12_of_18_gd92aff7_lcd--Add-support-for/lubbock/
646 done: Indicates the build was done, and holds the return code from make.
647 This is 0 for a good build, typically 2 for a failure.
649 err: Output from stderr, if any. Errors and warnings appear here.
651 log: Output from stdout. Normally there isn't any since buildman runs
652 in silent mode. Use -V to force a verbose build (this passes V=1
655 toolchain: Shows information about the toolchain used for the build.
657 sizes: Shows image size information.
659 It is possible to get the build binary output there also. Use the -k option
660 for this. In that case you will also see some output files, like:
662 System.map toolchain u-boot u-boot.bin u-boot.map autoconf.mk
663 (also SPL versions u-boot-spl and u-boot-spl.bin if available)
669 A key requirement for U-Boot is that you keep code/data size to a minimum.
670 Where a new feature increases this noticeably it should normally be put
671 behind a CONFIG flag so that boards can leave it disabled and keep the image
672 size more or less the same with each new release.
674 To check the impact of your commits on image size, use -S. For example:
676 $ ./tools/buildman/buildman -b us-x86 -sS
677 Summary of 10 commits for 1066 boards (4 threads, 1 job per thread)
678 01: MAKEALL: add support for per architecture toolchains
679 02: x86: Add function to get top of usable ram
680 x86: (for 1/3 boards) text -272.0 rodata +41.0
681 03: x86: Add basic cache operations
682 04: x86: Permit bootstage and timer data to be used prior to relocation
683 x86: (for 1/3 boards) data +16.0
684 05: x86: Add an __end symbol to signal the end of the U-Boot binary
685 x86: (for 1/3 boards) text +76.0
686 06: x86: Rearrange the output input to remove BSS
687 x86: (for 1/3 boards) bss -2140.0
688 07: x86: Support relocation of FDT on start-up
690 08: x86: Add error checking to x86 relocation code
691 09: x86: Adjust link device tree include file
692 10: x86: Enable CONFIG_OF_CONTROL on coreboot
695 You can see that image size only changed on x86, which is good because this
696 series is not supposed to change any other board. From commit 7 onwards the
697 build fails so we don't get code size numbers. The numbers are fractional
698 because they are an average of all boards for that architecture. The
699 intention is to allow you to quickly find image size problems introduced by
702 Note that the 'text' region and 'rodata' are split out. You should add the
703 two together to get the total read-only size (reported as the first column
704 in the output from binutil's 'size' utility).
706 A useful option is --step which lets you skip some commits. For example
707 --step 2 will show the image sizes for only every 2nd commit (so it will
708 compare the image sizes of the 1st, 3rd, 5th... commits). You can also use
709 --step 0 which will compare only the first and last commits. This is useful
710 for an overview of how your entire series affects code size. It will build
711 only the upstream commit and your final branch commit.
713 You can also use -d to see a detailed size breakdown for each board. This
714 list is sorted in order from largest growth to largest reduction.
716 It is even possible to go a little further with the -B option (--bloat). This
717 shows where U-Boot has bloated, breaking the size change down to the function
718 level. Example output is below:
720 $ ./tools/buildman/buildman -b us-mem4 -sSdB
722 19: Roll crc32 into hash infrastructure
723 arm: (for 10/10 boards) all -143.4 bss +1.2 data -4.8 rodata -48.2 text -91.6
724 paz00 : all +23 bss -4 rodata -29 text +56
725 u-boot: add: 1/0, grow: 3/-2 bytes: 168/-104 (64)
726 function old new delta
727 hash_command 80 160 +80
728 crc32_wd_buf - 56 +56
729 ext4fs_read_file 540 568 +28
730 insert_var_value_sub 688 692 +4
731 run_list_real 1996 1992 -4
732 do_mem_crc 168 68 -100
733 trimslice : all -9 bss +16 rodata -29 text +4
734 u-boot: add: 1/0, grow: 1/-3 bytes: 136/-124 (12)
735 function old new delta
736 hash_command 80 160 +80
737 crc32_wd_buf - 56 +56
738 ext4fs_iterate_dir 672 668 -4
739 ext4fs_read_file 568 548 -20
740 do_mem_crc 168 68 -100
741 whistler : all -9 bss +16 rodata -29 text +4
742 u-boot: add: 1/0, grow: 1/-3 bytes: 136/-124 (12)
743 function old new delta
744 hash_command 80 160 +80
745 crc32_wd_buf - 56 +56
746 ext4fs_iterate_dir 672 668 -4
747 ext4fs_read_file 568 548 -20
748 do_mem_crc 168 68 -100
749 seaboard : all -9 bss -28 rodata -29 text +48
750 u-boot: add: 1/0, grow: 3/-2 bytes: 160/-104 (56)
751 function old new delta
752 hash_command 80 160 +80
753 crc32_wd_buf - 56 +56
754 ext4fs_read_file 548 568 +20
755 run_list_real 1996 2000 +4
756 do_nandboot 760 756 -4
757 do_mem_crc 168 68 -100
758 colibri_t20 : all -9 rodata -29 text +20
759 u-boot: add: 1/0, grow: 2/-3 bytes: 140/-112 (28)
760 function old new delta
761 hash_command 80 160 +80
762 crc32_wd_buf - 56 +56
763 read_abs_bbt 204 208 +4
764 do_nandboot 760 756 -4
765 ext4fs_read_file 576 568 -8
766 do_mem_crc 168 68 -100
767 ventana : all -37 bss -12 rodata -29 text +4
768 u-boot: add: 1/0, grow: 1/-3 bytes: 136/-124 (12)
769 function old new delta
770 hash_command 80 160 +80
771 crc32_wd_buf - 56 +56
772 ext4fs_iterate_dir 672 668 -4
773 ext4fs_read_file 568 548 -20
774 do_mem_crc 168 68 -100
775 harmony : all -37 bss -16 rodata -29 text +8
776 u-boot: add: 1/0, grow: 2/-3 bytes: 140/-124 (16)
777 function old new delta
778 hash_command 80 160 +80
779 crc32_wd_buf - 56 +56
780 nand_write_oob_syndrome 428 432 +4
781 ext4fs_iterate_dir 672 668 -4
782 ext4fs_read_file 568 548 -20
783 do_mem_crc 168 68 -100
784 medcom-wide : all -417 bss +28 data -16 rodata -93 text -336
785 u-boot: add: 1/-1, grow: 1/-2 bytes: 88/-376 (-288)
786 function old new delta
787 crc32_wd_buf - 56 +56
788 do_fat_read_at 2872 2904 +32
790 do_mem_crc 168 68 -100
791 hash_command 420 160 -260
792 tec : all -449 bss -4 data -16 rodata -93 text -336
793 u-boot: add: 1/-1, grow: 1/-2 bytes: 88/-376 (-288)
794 function old new delta
795 crc32_wd_buf - 56 +56
796 do_fat_read_at 2872 2904 +32
798 do_mem_crc 168 68 -100
799 hash_command 420 160 -260
800 plutux : all -481 bss +16 data -16 rodata -93 text -388
801 u-boot: add: 1/-1, grow: 1/-3 bytes: 68/-408 (-340)
802 function old new delta
803 crc32_wd_buf - 56 +56
804 do_load_serial_bin 1688 1700 +12
806 do_fat_read_at 2904 2872 -32
807 do_mem_crc 168 68 -100
808 hash_command 420 160 -260
809 powerpc: (for 5/5 boards) all +37.4 data -3.2 rodata -41.8 text +82.4
810 MPC8610HPCD : all +55 rodata -29 text +84
811 u-boot: add: 1/0, grow: 0/-1 bytes: 176/-96 (80)
812 function old new delta
813 hash_command - 176 +176
814 do_mem_crc 184 88 -96
815 MPC8641HPCN : all +55 rodata -29 text +84
816 u-boot: add: 1/0, grow: 0/-1 bytes: 176/-96 (80)
817 function old new delta
818 hash_command - 176 +176
819 do_mem_crc 184 88 -96
820 MPC8641HPCN_36BIT: all +55 rodata -29 text +84
821 u-boot: add: 1/0, grow: 0/-1 bytes: 176/-96 (80)
822 function old new delta
823 hash_command - 176 +176
824 do_mem_crc 184 88 -96
825 sbc8641d : all +55 rodata -29 text +84
826 u-boot: add: 1/0, grow: 0/-1 bytes: 176/-96 (80)
827 function old new delta
828 hash_command - 176 +176
829 do_mem_crc 184 88 -96
830 xpedite517x : all -33 data -16 rodata -93 text +76
831 u-boot: add: 1/-1, grow: 0/-1 bytes: 176/-112 (64)
832 function old new delta
833 hash_command - 176 +176
835 do_mem_crc 184 88 -96
839 This shows that commit 19 has reduced codesize for arm slightly and increased
840 it for powerpc. This increase was offset in by reductions in rodata and
843 Shown below the summary lines are the sizes for each board. Below each board
844 are the sizes for each function. This information starts with:
846 add - number of functions added / removed
847 grow - number of functions which grew / shrunk
848 bytes - number of bytes of code added to / removed from all functions,
849 plus the total byte change in brackets
851 The change seems to be that hash_command() has increased by more than the
852 do_mem_crc() function has decreased. The function sizes typically add up to
853 roughly the text area size, but note that every read-only section except
854 rodata is included in 'text', so the function total does not exactly
857 It is common when refactoring code for the rodata to decrease as the text size
858 increases, and vice versa.
864 The .buildman file provides information about the available toolchains and
865 also allows build flags to be passed to 'make'. It consists of several
866 sections, with the section name in square brackets. Within each section are
867 a set of (tag, value) pairs.
869 '[toolchain]' section
871 This lists the available toolchains. The tag here doesn't matter, but
872 make sure it is unique. The value is the path to the toolchain. Buildman
873 will look in that path for a file ending in 'gcc'. It will then execute
874 it to check that it is a C compiler, passing only the --version flag to
875 it. If the return code is 0, buildman assumes that it is a valid C
876 compiler. It uses the first part of the name as the architecture and
877 strips off the last part when setting the CROSS_COMPILE environment
878 variable (parts are delimited with a hyphen).
880 For example powerpc-linux-gcc will be noted as a toolchain for 'powerpc'
881 and CROSS_COMPILE will be set to powerpc-linux- when using it.
883 '[toolchain-alias]' section
885 This converts toolchain architecture names to U-Boot names. For example,
886 if an x86 toolchains is called i386-linux-gcc it will not normally be
887 used for architecture 'x86'. Adding 'x86: i386 x86_64' to this section
888 will tell buildman that the i386 and x86_64 toolchains can be used for
889 the x86 architecture.
891 '[make-flags]' section
893 U-Boot's build system supports a few flags (such as BUILD_TAG) which
894 affect the build product. These flags can be specified in the buildman
895 settings file. They can also be useful when building U-Boot against other
896 open source software.
899 at91-boards=ENABLE_AT91_TEST=1
900 snapper9260=${at91-boards} BUILD_TAG=442
901 snapper9g45=${at91-boards} BUILD_TAG=443
903 This will use 'make ENABLE_AT91_TEST=1 BUILD_TAG=442' for snapper9260
904 and 'make ENABLE_AT91_TEST=1 BUILD_TAG=443' for snapper9g45. A special
905 variable ${target} is available to access the target name (snapper9260
906 and snapper9g20 in this case). Variables are resolved recursively. Note
907 that variables can only contain the characters A-Z, a-z, 0-9, hyphen (-)
910 It is expected that any variables added are dealt with in U-Boot's
911 config.mk file and documented in the README.
913 Note that you can pass ad-hoc options to the build using environment
914 variables, for example:
916 SOME_OPTION=1234 ./tools/buildman/buildman my_board
922 If you have made changes and want to do a quick sanity check of the
923 currently checked-out source, run buildman without the -b flag. This will
924 build the selected boards and display build status as it runs (i.e. -v is
925 enabled automatically). Use -e to see errors/warnings as well.
931 You can build a range of commits by specifying a range instead of a branch
932 when using the -b flag. For example:
934 upstream/master..us-buildman
936 will build commits in us-buildman that are not in upstream/master.
942 By default, buildman executes 'make mrproper' prior to building the first
943 commit for each board. This causes everything to be built from scratch. If you
944 trust the build system's incremental build capabilities, you can pass the -I
945 flag to skip the 'make mproper' invocation, which will reduce the amount of
946 work 'make' does, and hence speed up the build. This flag will speed up any
947 buildman invocation, since it reduces the amount of work done on any build.
949 One possible application of buildman is as part of a continual edit, build,
950 edit, build, ... cycle; repeatedly applying buildman to the same change or
951 series of changes while making small incremental modifications to the source
952 each time. This provides quick feedback regarding the correctness of recent
953 modifications. In this scenario, buildman's default choice of build directory
954 causes more build work to be performed than strictly necessary.
956 By default, each buildman thread uses a single directory for all builds. When a
957 thread builds multiple boards, the configuration built in this directory will
958 cycle through various different configurations, one per board built by the
959 thread. Variations in the configuration will force a rebuild of affected source
960 files when a thread switches between boards. Ideally, such buildman-induced
961 rebuilds would not happen, thus allowing the build to operate as efficiently as
962 the build system and source changes allow. buildman's -P flag may be used to
963 enable this; -P causes each board to be built in a separate (board-specific)
964 directory, thus avoiding any buildman-induced configuration changes in any
967 U-Boot's build system embeds information such as a build timestamp into the
968 final binary. This information varies each time U-Boot is built. This causes
969 various files to be rebuilt even if no source changes are made, which in turn
970 requires that the final U-Boot binary be re-linked. This unnecessary work can
971 be avoided by turning off the timestamp feature. This can be achieved by
972 setting the SOURCE_DATE_EPOCH environment variable to 0.
974 Combining all of these options together yields the command-line shown below.
975 This will provide the quickest possible feedback regarding the current content
976 of the source tree, thus allowing rapid tested evolution of the code.
978 SOURCE_DATE_EPOCH=0 ./tools/buildman/buildman -I -P tegra
981 Checking configuration
982 ======================
984 A common requirement when converting CONFIG options to Kconfig is to check
985 that the effective configuration has not changed due to the conversion.
986 Buildman supports this with the -K option, used after a build. This shows
987 differences in effective configuration between one commit and the next.
991 $ buildman -b kc4 -sK
993 43: Convert CONFIG_SPL_USBETH_SUPPORT to Kconfig
995 + u-boot.cfg: CONFIG_SPL_ENV_SUPPORT=1 CONFIG_SPL_NET_SUPPORT=1
996 + u-boot-spl.cfg: CONFIG_SPL_MMC_SUPPORT=1 CONFIG_SPL_NAND_SUPPORT=1
997 + all: CONFIG_SPL_ENV_SUPPORT=1 CONFIG_SPL_MMC_SUPPORT=1 CONFIG_SPL_NAND_SUPPORT=1 CONFIG_SPL_NET_SUPPORT=1
999 + u-boot.cfg: CONFIG_SPL_ENV_SUPPORT=1 CONFIG_SPL_NET_SUPPORT=1
1000 + u-boot-spl.cfg: CONFIG_SPL_MMC_SUPPORT=1 CONFIG_SPL_NAND_SUPPORT=1
1001 + all: CONFIG_SPL_ENV_SUPPORT=1 CONFIG_SPL_MMC_SUPPORT=1 CONFIG_SPL_NAND_SUPPORT=1 CONFIG_SPL_NET_SUPPORT=1
1002 44: Convert CONFIG_SPL_USB_HOST_SUPPORT to Kconfig
1005 This shows that commit 44 enabled three new options for the board
1006 am335x_evm_usbspl which were not enabled in commit 43. There is also a
1007 summary for 'arm' showing all the changes detected for that architecture.
1008 In this case there is only one board with changes, so 'arm' output is the
1009 same as 'am335x_evm_usbspl'/
1011 The -K option uses the u-boot.cfg, spl/u-boot-spl.cfg and tpl/u-boot-tpl.cfg
1012 files which are produced by a build. If all you want is to check the
1013 configuration you can in fact avoid doing a full build, using -D. This tells
1014 buildman to configuration U-Boot and create the .cfg files, but not actually
1015 build the source. This is 5-10 times faster than doing a full build.
1017 By default buildman considers the follow two configuration methods
1020 #define CONFIG_SOME_OPTION
1022 CONFIG_SOME_OPTION=y
1024 The former would appear in a header filer and the latter in a defconfig
1025 file. The achieve this, buildman considers 'y' to be '1' in configuration
1026 variables. This avoids lots of useless output when converting a CONFIG
1027 option to Kconfig. To disable this behaviour, use --squash-config-y.
1030 Checking the environment
1031 ========================
1033 When converting CONFIG options which manipulate the default environment,
1034 a common requirement is to check that the default environment has not
1035 changed due to the conversion. Buildman supports this with the -U option,
1036 used after a build. This shows differences in the default environment
1037 between one commit and the next.
1041 $ buildman -b squash brppt1 -sU
1042 boards.cfg is up to date. Nothing to do.
1043 Summary of 2 commits for 3 boards (3 threads, 3 jobs per thread)
1044 01: Migrate bootlimit to Kconfig
1045 02: Squashed commit of the following:
1046 c brppt1_mmc: altbootcmd=mmc dev 1; run mmcboot0; -> mmc dev 1; run mmcboot0
1047 c brppt1_spi: altbootcmd=mmc dev 1; run mmcboot0; -> mmc dev 1; run mmcboot0
1048 + brppt1_nand: altbootcmd=run usbscript
1049 - brppt1_nand: altbootcmd=run usbscript
1050 (no errors to report)
1052 This shows that commit 2 modified the value of 'altbootcmd' for 'brppt1_mmc'
1053 and 'brppt1_spi', removing a trailing semicolon. 'brppt1_nand' gained an a
1054 value for 'altbootcmd', but lost one for ' altbootcmd'.
1056 The -U option uses the u-boot.env files which are produced by a build.
1062 To build with clang (sandbox only), use the -O option to override the
1063 toolchain. For example:
1065 buildman -O clang-7 --board sandbox
1068 Doing a simple build
1069 ====================
1071 In some cases you just want to build a single board and get the full output, use
1072 the -w option, for example:
1074 buildman -o /tmp/build --board sandbox -w
1076 This will write the full build into /tmp/build including object files.
1082 Buildman has various other command-line options. Try --help to see them.
1084 To find out what toolchain prefix buildman will use for a build, use the -A
1087 To request that compiler warnings be promoted to errors, use -E. This passes the
1088 -Werror flag to the compiler. Note that the build can still produce warnings
1089 with -E, e.g. the migration warnings:
1091 ===================== WARNING ======================
1092 This board does not use CONFIG_DM_MMC. Please update
1094 ====================================================
1096 When doing builds, Buildman's return code will reflect the overall result:
1098 0 (success) No errors or warnings found
1100 129 Warnings found (only if no -W)
1102 You can use -W to tell Buildman to return 0 (success) instead of 129 when
1103 warnings are found. Note that it can be useful to combine -E and -W. This means
1104 that all compiler warnings will produce failures (code 128) and all other
1105 warnings will produce success (since 129 is changed to 0).
1107 If there are both warnings and errors, errors win, so buildman returns 128.
1110 How to change from MAKEALL
1111 ==========================
1113 Buildman includes most of the features of MAKEALL and is generally faster
1114 and easier to use. In particular it builds entire branches: if a particular
1115 commit introduces an error in a particular board, buildman can easily show
1116 you this, even if a later commit fixes that error.
1118 The reasons to deprecate MAKEALL are:
1119 - We don't want to maintain two build systems
1120 - Buildman is typically faster
1121 - Buildman has a lot more features
1123 But still, many people will be sad to lose MAKEALL. If you are used to
1124 MAKEALL, here are a few pointers.
1126 First you need to set up your tool chains - see the 'Setting up' section
1127 for details. Once you have your required toolchain(s) detected then you are
1130 To build the current source tree, run buildman without a -b flag:
1132 ./tools/buildman/buildman <list of things to build>
1134 This will build the current source tree for the given boards and display
1135 the results and errors.
1137 However buildman usually works on entire branches, and for that you must
1138 specify a board flag:
1140 ./tools/buildman/buildman -b <branch_name> <list of things to build>
1142 followed by (afterwards, or perhaps concurrently in another terminal):
1144 ./tools/buildman/buildman -b <branch_name> -s <list of things to build>
1146 to see the results of the build. Rather than showing you all the output,
1147 buildman just shows a summary, with red indicating that a commit introduced
1148 an error and green indicating that a commit fixed an error. Use the -e
1149 flag to see the full errors and -l to see which boards caused which errors.
1151 If you really want to see build results as they happen, use -v when doing a
1152 build (and -e to see the errors/warnings too).
1154 You don't need to stick around on that branch while buildman is running. It
1155 checks out its own copy of the source code, so you can change branches,
1156 add commits, etc. without affecting the build in progress.
1158 The <list of things to build> can include board names, architectures or the
1159 like. There are no flags to disambiguate since ambiguities are rare. Using
1160 the examples from MAKEALL:
1163 - build all Power Architecture boards:
1165 MAKEALL --arch powerpc
1167 ** buildman -b <branch> powerpc
1168 - build all PowerPC boards manufactured by vendor "esd":
1169 MAKEALL -a powerpc -v esd
1170 ** buildman -b <branch> esd
1171 - build all PowerPC boards manufactured either by "keymile" or "siemens":
1172 MAKEALL -a powerpc -v keymile -v siemens
1173 ** buildman -b <branch> keymile siemens
1174 - build all Freescale boards with MPC83xx CPUs, plus all 4xx boards:
1175 MAKEALL -c mpc83xx -v freescale 4xx
1176 ** buildman -b <branch> mpc83xx freescale 4xx
1178 Buildman automatically tries to use all the CPUs in your machine. If you
1179 are building a lot of boards it will use one thread for every CPU core
1180 it detects in your machine. This is like MAKEALL's BUILD_NBUILDS option.
1181 You can use the -T flag to change the number of threads. If you are only
1182 building a few boards, buildman will automatically run make with the -j
1183 flag to increase the number of concurrent make tasks. It isn't normally
1184 that helpful to fiddle with this option, but if you use the BUILD_NCPUS
1185 option in MAKEALL then -j is the equivalent in buildman.
1187 Buildman puts its output in ../<branch_name> by default but you can change
1188 this with the -o option. Buildman normally does out-of-tree builds: use -i
1189 to disable that if you really want to. But be careful that once you have
1190 used -i you pollute buildman's copies of the source tree, and you will need
1191 to remove the build directory (normally ../<branch_name>) to run buildman
1192 in normal mode (without -i).
1194 Buildman doesn't keep the output result normally, but use the -k option to
1197 Please read 'Theory of Operation' a few times as it will make a lot of
1200 Some options you might like are:
1202 -B shows which functions are growing/shrinking in which commit - great
1203 for finding code bloat.
1204 -S shows image sizes for each commit (just an overall summary)
1205 -u shows boards that you haven't built yet
1206 --step 0 will build just the upstream commit and the last commit of your
1207 branch. This is often a quick sanity check that your branch doesn't
1208 break anything. But note this does not check bisectability!
1214 This has mostly be written in my spare time as a response to my difficulties
1215 in testing large series of patches. Apart from tidying up there is quite a
1216 bit of scope for improvement. Things like better error diffs and easier
1217 access to log files. Also it would be nice if buildman could 'hunt' for
1218 problems, perhaps by building a few boards for each arch, or checking
1219 commits for changed files and building only boards which use those files.
1225 Thanks to Grant Grundler <grundler@chromium.org> for his ideas for improving
1226 the build speed by building all commits for a board instead of the other