2 # Copyright 2015-2016 The OpenSSL Project Authors. All Rights Reserved.
4 # Licensed under the OpenSSL license (the "License"). You may not use
5 # this file except in compliance with the License. You can obtain a copy
6 # in the file LICENSE in the source distribution or at
7 # https://www.openssl.org/source/license.html
16 use OpenSSL::Test qw/:DEFAULT with bldtop_file srctop_file cmdstr/;
17 use OpenSSL::Test::Utils;
21 $ENV{CTLOG_FILE} = srctop_file("test", "ct", "log_list.conf");
23 my ($no_rsa, $no_dsa, $no_dh, $no_ec, $no_srp, $no_psk,
24 $no_ssl3, $no_tls1, $no_tls1_1, $no_tls1_2,
25 $no_dtls, $no_dtls1, $no_dtls1_2, $no_ct) =
26 anydisabled qw/rsa dsa dh ec srp psk
27 ssl3 tls1 tls1_1 tls1_2
28 dtls dtls1 dtls1_2 ct/;
29 my $no_anytls = alldisabled(available_protocols("tls"));
30 my $no_anydtls = alldisabled(available_protocols("dtls"));
32 plan skip_all => "No SSL/TLS/DTLS protocol is support by this OpenSSL build"
33 if $no_anytls && $no_anydtls;
36 my @reqcmd = ("openssl", "req");
37 my @x509cmd = ("openssl", "x509", $digest);
38 my @verifycmd = ("openssl", "verify");
39 my @gendsacmd = ("openssl", "gendsa");
40 my $dummycnf = srctop_file("apps", "openssl.cnf");
42 my $CAkey = "keyCA.ss";
43 my $CAcert="certCA.ss";
44 my $CAserial="certCA.srl";
46 my $CAconf=srctop_file("test","CAss.cnf");
47 my $CAreq2="req2CA.ss"; # temp
49 my $Uconf=srctop_file("test","Uss.cnf");
62 my $P1conf=srctop_file("test","P1ss.cnf");
65 my $P1cert="certP1.ss";
66 my $P1intermediate="tmp_intP1.ss";
68 my $P2conf=srctop_file("test","P2ss.cnf");
71 my $P2cert="certP2.ss";
72 my $P2intermediate="tmp_intP2.ss";
74 my $server_sess="server.ss";
75 my $client_sess="client.ss";
77 # ssltest_old.c is deprecated in favour of the new framework in ssl_test.c
78 # If you're adding tests here, you probably want to convert them to the
79 # new format in ssl_test.c and add recipes to 80-test_ssl_new.t instead.
82 +6 # For the first testssl
85 subtest 'test_ss' => sub {
87 open OUT, ">", "intP1.ss";
88 copy($CAcert, \*OUT); copy($Ucert, \*OUT);
91 open OUT, ">", "intP2.ss";
92 copy($CAcert, \*OUT); copy($Ucert, \*OUT); copy($P1cert, \*OUT);
97 note('test_ssl -- key U');
98 testssl("keyU.ss", $Ucert, $CAcert);
103 open RND, ">>", ".rnd";
104 print RND "string to make the random number generator think it has entropy";
107 my @req_dsa = ("-newkey",
108 "dsa:".srctop_file("apps", "dsa1024.pem"));
109 my $dsaparams = srctop_file("apps", "dsa1024.pem");
120 skip 'failure', 16 unless
121 ok(run(app([@reqcmd, "-config", $CAconf,
122 "-out", $CAreq, "-keyout", $CAkey,
124 'make cert request');
126 skip 'failure', 15 unless
127 ok(run(app([@x509cmd, "-CAcreateserial", "-in", $CAreq, "-days", "30",
128 "-req", "-out", $CAcert, "-signkey", $CAkey,
129 "-extfile", $CAconf, "-extensions", "v3_ca"],
130 stdout => "err.ss")),
131 'convert request into self-signed cert');
133 skip 'failure', 14 unless
134 ok(run(app([@x509cmd, "-in", $CAcert,
135 "-x509toreq", "-signkey", $CAkey, "-out", $CAreq2],
136 stdout => "err.ss")),
137 'convert cert into a cert request');
139 skip 'failure', 13 unless
140 ok(run(app([@reqcmd, "-config", $dummycnf,
141 "-verify", "-in", $CAreq, "-noout"])),
145 skip 'failure', 12 unless
146 ok(run(app([@reqcmd, "-config", $dummycnf,
147 "-verify", "-in", $CAreq2, "-noout"])),
150 skip 'failure', 11 unless
151 ok(run(app([@verifycmd, "-CAfile", $CAcert, $CAcert])),
154 skip 'failure', 10 unless
155 ok(run(app([@reqcmd, "-config", $Uconf,
156 "-out", $Ureq, "-keyout", $Ukey, @req_new],
157 stdout => "err.ss")),
158 'make a user cert request');
160 skip 'failure', 9 unless
161 ok(run(app([@x509cmd, "-CAcreateserial", "-in", $Ureq, "-days", "30",
162 "-req", "-out", $Ucert,
163 "-CA", $CAcert, "-CAkey", $CAkey, "-CAserial", $CAserial,
164 "-extfile", $Uconf, "-extensions", "v3_ee"],
166 && run(app([@verifycmd, "-CAfile", $CAcert, $Ucert])),
167 'sign user cert request');
169 skip 'failure', 8 unless
170 ok(run(app([@x509cmd,
171 "-subject", "-issuer", "-startdate", "-enddate",
172 "-noout", "-in", $Ucert])),
173 'Certificate details');
175 skip 'failure', 7 unless
176 subtest 'DSA certificate creation' => sub {
177 plan skip_all => "skipping DSA certificate creation"
183 $ENV{CN2} = "DSA Certificate";
184 skip 'failure', 4 unless
185 ok(run(app([@gendsacmd, "-out", $Dkey,
187 stdout => "err.ss")),
189 skip 'failure', 3 unless
190 ok(run(app([@reqcmd, "-new", "-config", $Uconf,
191 "-out", $Dreq, "-key", $Dkey],
192 stdout => "err.ss")),
193 "make a DSA user cert request");
194 skip 'failure', 2 unless
195 ok(run(app([@x509cmd, "-CAcreateserial",
200 "-CA", $CAcert, "-CAkey", $CAkey,
201 "-CAserial", $CAserial,
203 "-extensions", "v3_ee_dsa"],
204 stdout => "err.ss")),
205 "sign DSA user cert request");
206 skip 'failure', 1 unless
207 ok(run(app([@verifycmd, "-CAfile", $CAcert, $Dcert])),
208 "verify DSA user cert");
209 skip 'failure', 0 unless
210 ok(run(app([@x509cmd,
211 "-subject", "-issuer",
212 "-startdate", "-enddate", "-noout",
214 "DSA Certificate details");
218 skip 'failure', 6 unless
219 subtest 'ECDSA/ECDH certificate creation' => sub {
220 plan skip_all => "skipping ECDSA/ECDH certificate creation"
226 $ENV{CN2} = "ECDSA Certificate";
227 skip 'failure', 4 unless
228 ok(run(app(["openssl", "ecparam", "-name", "P-256",
230 "make EC parameters");
231 skip 'failure', 3 unless
232 ok(run(app([@reqcmd, "-config", $Uconf,
233 "-out", $Ereq, "-keyout", $Ekey,
234 "-newkey", "ec:ecp.ss"],
235 stdout => "err.ss")),
236 "make a ECDSA/ECDH user cert request");
237 skip 'failure', 2 unless
238 ok(run(app([@x509cmd, "-CAcreateserial",
243 "-CA", $CAcert, "-CAkey", $CAkey,
244 "-CAserial", $CAserial,
246 "-extensions", "v3_ee_ec"],
247 stdout => "err.ss")),
248 "sign ECDSA/ECDH user cert request");
249 skip 'failure', 1 unless
250 ok(run(app([@verifycmd, "-CAfile", $CAcert, $Ecert])),
251 "verify ECDSA/ECDH user cert");
252 skip 'failure', 0 unless
253 ok(run(app([@x509cmd,
254 "-subject", "-issuer",
255 "-startdate", "-enddate", "-noout",
257 "ECDSA Certificate details");
261 skip 'failure', 5 unless
262 ok(run(app([@reqcmd, "-config", $P1conf,
263 "-out", $P1req, "-keyout", $P1key, @req_new],
264 stdout => "err.ss")),
265 'make a proxy cert request');
268 skip 'failure', 4 unless
269 ok(run(app([@x509cmd, "-CAcreateserial", "-in", $P1req, "-days", "30",
270 "-req", "-out", $P1cert,
271 "-CA", $Ucert, "-CAkey", $Ukey,
272 "-extfile", $P1conf, "-extensions", "v3_proxy"],
273 stdout => "err.ss")),
274 'sign proxy with user cert');
276 copy($Ucert, $P1intermediate);
277 run(app([@verifycmd, "-CAfile", $CAcert,
278 "-untrusted", $P1intermediate, $P1cert]));
279 ok(run(app([@x509cmd,
280 "-subject", "-issuer", "-startdate", "-enddate",
281 "-noout", "-in", $P1cert])),
282 'Certificate details');
284 skip 'failure', 2 unless
285 ok(run(app([@reqcmd, "-config", $P2conf,
286 "-out", $P2req, "-keyout", $P2key,
288 stdout => "err.ss")),
289 'make another proxy cert request');
292 skip 'failure', 1 unless
293 ok(run(app([@x509cmd, "-CAcreateserial", "-in", $P2req, "-days", "30",
294 "-req", "-out", $P2cert,
295 "-CA", $P1cert, "-CAkey", $P1key,
296 "-extfile", $P2conf, "-extensions", "v3_proxy"],
297 stdout => "err.ss")),
298 'sign second proxy cert request with the first proxy cert');
301 open OUT, ">", $P2intermediate;
302 copy($Ucert, \*OUT); copy($P1cert, \*OUT);
304 run(app([@verifycmd, "-CAfile", $CAcert,
305 "-untrusted", $P2intermediate, $P2cert]));
306 ok(run(app([@x509cmd,
307 "-subject", "-issuer", "-startdate", "-enddate",
308 "-noout", "-in", $P2cert])),
309 'Certificate details');
314 my ($key, $cert, $CAtmp) = @_;
315 my @CA = $CAtmp ? ("-CAfile", $CAtmp) : ("-CApath", bldtop_dir("certs"));
317 my @ssltest = ("ssltest_old",
318 "-s_key", $key, "-s_cert", $cert,
319 "-c_key", $key, "-c_cert", $cert);
321 my $serverinfo = srctop_file("test","serverinfo.pem");
324 if (grep /DSA Public Key/, run(app(["openssl", "x509", "-in", $cert,
325 "-text", "-noout"]), capture => 1)) {
332 subtest 'standard SSL tests' => sub {
333 ######################################################################
337 skip "SSLv3 is not supported by this OpenSSL build", 4
340 ok(run(test([@ssltest, "-bio_pair", "-ssl3"])),
341 'test sslv3 via BIO pair');
342 ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-server_auth", @CA])),
343 'test sslv3 with server authentication via BIO pair');
344 ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-client_auth", @CA])),
345 'test sslv3 with client authentication via BIO pair');
346 ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-server_auth", "-client_auth", @CA])),
347 'test sslv3 with both server and client authentication via BIO pair');
351 skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", 1
354 ok(run(test([@ssltest, "-bio_pair"])),
355 'test sslv2/sslv3 via BIO pair');
359 skip "DTLSv1 is not supported by this OpenSSL build", 4
360 if disabled("dtls1");
362 ok(run(test([@ssltest, "-dtls1"])),
364 ok(run(test([@ssltest, "-dtls1", "-server_auth", @CA])),
365 'test dtlsv1 with server authentication');
366 ok(run(test([@ssltest, "-dtls1", "-client_auth", @CA])),
367 'test dtlsv1 with client authentication');
368 ok(run(test([@ssltest, "-dtls1", "-server_auth", "-client_auth", @CA])),
369 'test dtlsv1 with both server and client authentication');
373 skip "DTLSv1.2 is not supported by this OpenSSL build", 4
374 if disabled("dtls1_2");
376 ok(run(test([@ssltest, "-dtls12"])),
378 ok(run(test([@ssltest, "-dtls12", "-server_auth", @CA])),
379 'test dtlsv1.2 with server authentication');
380 ok(run(test([@ssltest, "-dtls12", "-client_auth", @CA])),
381 'test dtlsv1.2 with client authentication');
382 ok(run(test([@ssltest, "-dtls12", "-server_auth", "-client_auth", @CA])),
383 'test dtlsv1.2 with both server and client authentication');
387 skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", 8
391 skip "skipping test of sslv2/sslv3 w/o (EC)DHE test", 1 if $dsa_cert;
393 ok(run(test([@ssltest, "-bio_pair", "-no_dhe", "-no_ecdhe"])),
394 'test sslv2/sslv3 w/o (EC)DHE via BIO pair');
397 ok(run(test([@ssltest, "-bio_pair", "-dhe1024dsa", "-v"])),
398 'test sslv2/sslv3 with 1024bit DHE via BIO pair');
399 ok(run(test([@ssltest, "-bio_pair", "-server_auth", @CA])),
400 'test sslv2/sslv3 with server authentication');
401 ok(run(test([@ssltest, "-bio_pair", "-client_auth", @CA])),
402 'test sslv2/sslv3 with client authentication via BIO pair');
403 ok(run(test([@ssltest, "-bio_pair", "-server_auth", "-client_auth", @CA])),
404 'test sslv2/sslv3 with both client and server authentication via BIO pair');
405 ok(run(test([@ssltest, "-bio_pair", "-server_auth", "-client_auth", "-app_verify", @CA])),
406 'test sslv2/sslv3 with both client and server authentication via BIO pair and app verify');
409 skip "No IPv4 available on this machine", 1
410 unless !disabled("sock") && have_IPv4();
411 ok(run(test([@ssltest, "-ipv4"])),
412 'test TLS via IPv4');
416 skip "No IPv6 available on this machine", 1
417 unless !disabled("sock") && have_IPv6();
418 ok(run(test([@ssltest, "-ipv6"])),
419 'test TLS via IPv6');
424 subtest "Testing ciphersuites" => sub {
427 my $ciphers = "-EXP:-PSK:-SRP:-kDH:-kECDHe";
430 note "skipping DHE tests\n";
431 $ciphers .= ":-kDHE";
434 note "skipping DSA tests\n";
435 $ciphers .= ":-aDSA";
437 push @exkeys, "-s_cert", "certD.ss", "-s_key", "keyD.ss";
441 note "skipping EC tests\n";
442 $ciphers .= ":!aECDSA:!kECDH";
444 push @exkeys, "-s_cert", "certE.ss", "-s_key", "keyE.ss";
448 # FIXME: I feel unsure about the following line, is that really just TLSv1.2, or is it all of the SSLv3/TLS protocols?
449 push(@protocols, "TLSv1.2") unless $no_tls1_2;
450 push(@protocols, "SSLv3") unless $no_ssl3;
451 my $protocolciphersuitcount = 0;
454 map { split(/:/, $_) }
455 run(app(["openssl", "ciphers", "${_}:$ciphers"]),
457 map { s/\R//; } @c; # chomp @c;
458 $protocolciphersuitcount += scalar @c;
459 $_ => [ @c ] } @protocols;
461 plan skip_all => "None of the ciphersuites to test are available in this OpenSSL build"
462 if $protocolciphersuitcount + scalar(@protocols) == 0;
464 # The count of protocols is because in addition to the ciphersuits
465 # we got above, we're running a weak DH test for each protocol
466 plan tests => $protocolciphersuitcount + scalar(@protocols);
468 foreach my $protocol (@protocols) {
469 note "Testing ciphersuites for $protocol";
470 foreach my $cipher (@{$ciphersuites{$protocol}}) {
471 ok(run(test([@ssltest, @exkeys, "-cipher", $cipher,
472 $protocol eq "SSLv3" ? ("-ssl3") : ()])),
475 is(run(test([@ssltest,
477 "-c_cipher", 'EDH:@SECLEVEL=1',
479 $protocol eq "SSLv3" ? ("-ssl3") : ()])), 0,
480 "testing connection with weak DH, expecting failure");
484 subtest 'RSA/(EC)DHE/PSK tests' => sub {
485 ######################################################################
490 skip "TLSv1.0 is not supported by this OpenSSL build", 5
494 skip "skipping anonymous DH tests", 1
497 ok(run(test([@ssltest, "-v", "-bio_pair", "-tls1", "-cipher", "ADH", "-dhe1024dsa", "-num", "10", "-f", "-time"])),
498 'test tlsv1 with 1024bit anonymous DH, multiple handshakes');
502 skip "skipping RSA tests", 2
505 ok(run(test(["ssltest_old", "-v", "-bio_pair", "-tls1", "-s_cert", srctop_file("apps","server2.pem"), "-no_dhe", "-no_ecdhe", "-num", "10", "-f", "-time"])),
506 'test tlsv1 with 1024bit RSA, no (EC)DHE, multiple handshakes');
508 skip "skipping RSA+DHE tests", 1
511 ok(run(test(["ssltest_old", "-v", "-bio_pair", "-tls1", "-s_cert", srctop_file("apps","server2.pem"), "-dhe1024dsa", "-num", "10", "-f", "-time"])),
512 'test tlsv1 with 1024bit RSA, 1024bit DHE, multiple handshakes');
516 skip "skipping PSK tests", 2
519 ok(run(test([@ssltest, "-tls1", "-cipher", "PSK", "-psk", "abc123"])),
520 'test tls1 with PSK');
522 ok(run(test([@ssltest, "-bio_pair", "-tls1", "-cipher", "PSK", "-psk", "abc123"])),
523 'test tls1 with PSK via BIO pair');
529 subtest 'Custom Extension tests' => sub {
530 ######################################################################
535 skip "TLSv1.0 is not supported by this OpenSSL build", 1
538 ok(run(test([@ssltest, "-bio_pair", "-tls1", "-custom_ext"])),
539 'test tls1 with custom extensions');
543 subtest 'Serverinfo tests' => sub {
544 ######################################################################
549 skip "TLSv1.0 is not supported by this OpenSSL build", 5
552 note('echo test tls1 with serverinfo');
553 ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo])));
554 ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_sct"])));
555 ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_tack"])));
556 ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_sct", "-serverinfo_tack"])));
557 ok(run(test([@ssltest, "-bio_pair", "-tls1", "-custom_ext", "-serverinfo_file", $serverinfo, "-serverinfo_sct", "-serverinfo_tack"])));
561 subtest 'SRP tests' => sub {
566 skip "skipping SRP tests", 4
567 if $no_srp || alldisabled(grep !/^ssl3/, available_protocols("tls"));
569 ok(run(test([@ssltest, "-tls1", "-cipher", "SRP", "-srpuser", "test", "-srppass", "abc123"])),
570 'test tls1 with SRP');
572 ok(run(test([@ssltest, "-bio_pair", "-tls1", "-cipher", "SRP", "-srpuser", "test", "-srppass", "abc123"])),
573 'test tls1 with SRP via BIO pair');
575 ok(run(test([@ssltest, "-tls1", "-cipher", "aSRP", "-srpuser", "test", "-srppass", "abc123"])),
576 'test tls1 with SRP auth');
578 ok(run(test([@ssltest, "-bio_pair", "-tls1", "-cipher", "aSRP", "-srpuser", "test", "-srppass", "abc123"])),
579 'test tls1 with SRP auth via BIO pair');
593 unlink basename($Ucert, '.ss').'.srl';
606 unlink basename($P1cert, '.ss').'.srl';
607 unlink $P1intermediate;
613 unlink $P2intermediate;