2 # Copyright 2015-2016 The OpenSSL Project Authors. All Rights Reserved.
4 # Licensed under the OpenSSL license (the "License"). You may not use
5 # this file except in compliance with the License. You can obtain a copy
6 # in the file LICENSE in the source distribution or at
7 # https://www.openssl.org/source/license.html
16 use OpenSSL::Test qw/:DEFAULT with bldtop_file srctop_file cmdstr/;
17 use OpenSSL::Test::Utils;
21 $ENV{CTLOG_FILE} = srctop_file("test", "ct", "log_list.conf");
23 my ($no_rsa, $no_dsa, $no_dh, $no_ec, $no_srp, $no_psk,
24 $no_ssl3, $no_tls1, $no_tls1_1, $no_tls1_2,
25 $no_dtls, $no_dtls1, $no_dtls1_2, $no_ct) =
26 anydisabled qw/rsa dsa dh ec srp psk
27 ssl3 tls1 tls1_1 tls1_2
28 dtls dtls1 dtls1_2 ct/;
29 my $no_anytls = alldisabled(available_protocols("tls"));
30 my $no_anydtls = alldisabled(available_protocols("dtls"));
32 plan skip_all => "No SSL/TLS/DTLS protocol is support by this OpenSSL build"
33 if $no_anytls && $no_anydtls;
36 my @reqcmd = ("openssl", "req");
37 my @x509cmd = ("openssl", "x509", $digest);
38 my @verifycmd = ("openssl", "verify");
39 my @gendsacmd = ("openssl", "gendsa");
40 my $dummycnf = srctop_file("apps", "openssl.cnf");
42 my $CAkey = "keyCA.ss";
43 my $CAcert="certCA.ss";
44 my $CAserial="certCA.srl";
46 my $CAconf=srctop_file("test","CAss.cnf");
47 my $CAreq2="req2CA.ss"; # temp
49 my $Uconf=srctop_file("test","Uss.cnf");
62 my $P1conf=srctop_file("test","P1ss.cnf");
65 my $P1cert="certP1.ss";
66 my $P1intermediate="tmp_intP1.ss";
68 my $P2conf=srctop_file("test","P2ss.cnf");
71 my $P2cert="certP2.ss";
72 my $P2intermediate="tmp_intP2.ss";
74 my $server_sess="server.ss";
75 my $client_sess="client.ss";
77 # ssltest_old.c is deprecated in favour of the new framework in ssl_test.c
78 # If you're adding tests here, you probably want to convert them to the
79 # new format in ssl_test.c and add recipes to 80-test_ssl_new.t instead.
82 + 14 # For the first testssl
85 subtest 'test_ss' => sub {
87 open OUT, ">", "intP1.ss";
88 copy($CAcert, \*OUT); copy($Ucert, \*OUT);
91 open OUT, ">", "intP2.ss";
92 copy($CAcert, \*OUT); copy($Ucert, \*OUT); copy($P1cert, \*OUT);
97 note('test_ssl -- key U');
98 testssl("keyU.ss", $Ucert, $CAcert);
103 open RND, ">>", ".rnd";
104 print RND "string to make the random number generator think it has entropy";
107 my @req_dsa = ("-newkey",
108 "dsa:".srctop_file("apps", "dsa1024.pem"));
109 my $dsaparams = srctop_file("apps", "dsa1024.pem");
120 skip 'failure', 16 unless
121 ok(run(app([@reqcmd, "-config", $CAconf,
122 "-out", $CAreq, "-keyout", $CAkey,
124 'make cert request');
126 skip 'failure', 15 unless
127 ok(run(app([@x509cmd, "-CAcreateserial", "-in", $CAreq, "-days", "30",
128 "-req", "-out", $CAcert, "-signkey", $CAkey,
129 "-extfile", $CAconf, "-extensions", "v3_ca"],
130 stdout => "err.ss")),
131 'convert request into self-signed cert');
133 skip 'failure', 14 unless
134 ok(run(app([@x509cmd, "-in", $CAcert,
135 "-x509toreq", "-signkey", $CAkey, "-out", $CAreq2],
136 stdout => "err.ss")),
137 'convert cert into a cert request');
139 skip 'failure', 13 unless
140 ok(run(app([@reqcmd, "-config", $dummycnf,
141 "-verify", "-in", $CAreq, "-noout"])),
145 skip 'failure', 12 unless
146 ok(run(app([@reqcmd, "-config", $dummycnf,
147 "-verify", "-in", $CAreq2, "-noout"])),
150 skip 'failure', 11 unless
151 ok(run(app([@verifycmd, "-CAfile", $CAcert, $CAcert])),
154 skip 'failure', 10 unless
155 ok(run(app([@reqcmd, "-config", $Uconf,
156 "-out", $Ureq, "-keyout", $Ukey, @req_new],
157 stdout => "err.ss")),
158 'make a user cert request');
160 skip 'failure', 9 unless
161 ok(run(app([@x509cmd, "-CAcreateserial", "-in", $Ureq, "-days", "30",
162 "-req", "-out", $Ucert,
163 "-CA", $CAcert, "-CAkey", $CAkey, "-CAserial", $CAserial,
164 "-extfile", $Uconf, "-extensions", "v3_ee"],
166 && run(app([@verifycmd, "-CAfile", $CAcert, $Ucert])),
167 'sign user cert request');
169 skip 'failure', 8 unless
170 ok(run(app([@x509cmd,
171 "-subject", "-issuer", "-startdate", "-enddate",
172 "-noout", "-in", $Ucert])),
173 'Certificate details');
175 skip 'failure', 7 unless
176 subtest 'DSA certificate creation' => sub {
177 plan skip_all => "skipping DSA certificate creation"
183 $ENV{CN2} = "DSA Certificate";
184 skip 'failure', 4 unless
185 ok(run(app([@gendsacmd, "-out", $Dkey,
187 stdout => "err.ss")),
189 skip 'failure', 3 unless
190 ok(run(app([@reqcmd, "-new", "-config", $Uconf,
191 "-out", $Dreq, "-key", $Dkey],
192 stdout => "err.ss")),
193 "make a DSA user cert request");
194 skip 'failure', 2 unless
195 ok(run(app([@x509cmd, "-CAcreateserial",
200 "-CA", $CAcert, "-CAkey", $CAkey,
201 "-CAserial", $CAserial,
203 "-extensions", "v3_ee_dsa"],
204 stdout => "err.ss")),
205 "sign DSA user cert request");
206 skip 'failure', 1 unless
207 ok(run(app([@verifycmd, "-CAfile", $CAcert, $Dcert])),
208 "verify DSA user cert");
209 skip 'failure', 0 unless
210 ok(run(app([@x509cmd,
211 "-subject", "-issuer",
212 "-startdate", "-enddate", "-noout",
214 "DSA Certificate details");
218 skip 'failure', 6 unless
219 subtest 'ECDSA/ECDH certificate creation' => sub {
220 plan skip_all => "skipping ECDSA/ECDH certificate creation"
226 $ENV{CN2} = "ECDSA Certificate";
227 skip 'failure', 4 unless
228 ok(run(app(["openssl", "ecparam", "-name", "P-256",
230 "make EC parameters");
231 skip 'failure', 3 unless
232 ok(run(app([@reqcmd, "-config", $Uconf,
233 "-out", $Ereq, "-keyout", $Ekey,
234 "-newkey", "ec:ecp.ss"],
235 stdout => "err.ss")),
236 "make a ECDSA/ECDH user cert request");
237 skip 'failure', 2 unless
238 ok(run(app([@x509cmd, "-CAcreateserial",
243 "-CA", $CAcert, "-CAkey", $CAkey,
244 "-CAserial", $CAserial,
246 "-extensions", "v3_ee_ec"],
247 stdout => "err.ss")),
248 "sign ECDSA/ECDH user cert request");
249 skip 'failure', 1 unless
250 ok(run(app([@verifycmd, "-CAfile", $CAcert, $Ecert])),
251 "verify ECDSA/ECDH user cert");
252 skip 'failure', 0 unless
253 ok(run(app([@x509cmd,
254 "-subject", "-issuer",
255 "-startdate", "-enddate", "-noout",
257 "ECDSA Certificate details");
261 skip 'failure', 5 unless
262 ok(run(app([@reqcmd, "-config", $P1conf,
263 "-out", $P1req, "-keyout", $P1key, @req_new],
264 stdout => "err.ss")),
265 'make a proxy cert request');
268 skip 'failure', 4 unless
269 ok(run(app([@x509cmd, "-CAcreateserial", "-in", $P1req, "-days", "30",
270 "-req", "-out", $P1cert,
271 "-CA", $Ucert, "-CAkey", $Ukey,
272 "-extfile", $P1conf, "-extensions", "v3_proxy"],
273 stdout => "err.ss")),
274 'sign proxy with user cert');
276 copy($Ucert, $P1intermediate);
277 run(app([@verifycmd, "-CAfile", $CAcert,
278 "-untrusted", $P1intermediate, $P1cert]));
279 ok(run(app([@x509cmd,
280 "-subject", "-issuer", "-startdate", "-enddate",
281 "-noout", "-in", $P1cert])),
282 'Certificate details');
284 skip 'failure', 2 unless
285 ok(run(app([@reqcmd, "-config", $P2conf,
286 "-out", $P2req, "-keyout", $P2key,
288 stdout => "err.ss")),
289 'make another proxy cert request');
292 skip 'failure', 1 unless
293 ok(run(app([@x509cmd, "-CAcreateserial", "-in", $P2req, "-days", "30",
294 "-req", "-out", $P2cert,
295 "-CA", $P1cert, "-CAkey", $P1key,
296 "-extfile", $P2conf, "-extensions", "v3_proxy"],
297 stdout => "err.ss")),
298 'sign second proxy cert request with the first proxy cert');
301 open OUT, ">", $P2intermediate;
302 copy($Ucert, \*OUT); copy($P1cert, \*OUT);
304 run(app([@verifycmd, "-CAfile", $CAcert,
305 "-untrusted", $P2intermediate, $P2cert]));
306 ok(run(app([@x509cmd,
307 "-subject", "-issuer", "-startdate", "-enddate",
308 "-noout", "-in", $P2cert])),
309 'Certificate details');
314 my $key = shift || bldtop_file("apps","server.pem");
315 my $cert = shift || bldtop_file("apps","server.pem");
317 my @CA = $CAtmp ? ("-CAfile", $CAtmp) : ("-CApath", bldtop_dir("certs"));
320 my @ssltest = ("ssltest_old",
321 "-s_key", $key, "-s_cert", $cert,
322 "-c_key", $key, "-c_cert", $cert);
324 my $serverinfo = srctop_file("test","serverinfo.pem");
327 if (grep /DSA Public Key/, run(app(["openssl", "x509", "-in", $cert,
328 "-text", "-noout"]), capture => 1)) {
335 subtest 'standard SSL tests' => sub {
336 ######################################################################
340 skip "SSLv3 is not supported by this OpenSSL build", 4
343 ok(run(test([@ssltest, "-ssl3", @extra])),
345 ok(run(test([@ssltest, "-ssl3", "-server_auth", @CA, @extra])),
346 'test sslv3 with server authentication');
347 ok(run(test([@ssltest, "-ssl3", "-client_auth", @CA, @extra])),
348 'test sslv3 with client authentication');
349 ok(run(test([@ssltest, "-ssl3", "-server_auth", "-client_auth", @CA, @extra])),
350 'test sslv3 with both server and client authentication');
354 skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", 4
357 ok(run(test([@ssltest, @extra])),
359 ok(run(test([@ssltest, "-server_auth", @CA, @extra])),
360 'test sslv2/sslv3 with server authentication');
361 ok(run(test([@ssltest, "-client_auth", @CA, @extra])),
362 'test sslv2/sslv3 with client authentication');
363 ok(run(test([@ssltest, "-server_auth", "-client_auth", @CA, @extra])),
364 'test sslv2/sslv3 with both server and client authentication');
368 skip "SSLv3 is not supported by this OpenSSL build", 4
371 ok(run(test([@ssltest, "-bio_pair", "-ssl3", @extra])),
372 'test sslv3 via BIO pair');
373 ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-server_auth", @CA, @extra])),
374 'test sslv3 with server authentication via BIO pair');
375 ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-client_auth", @CA, @extra])),
376 'test sslv3 with client authentication via BIO pair');
377 ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-server_auth", "-client_auth", @CA, @extra])),
378 'test sslv3 with both server and client authentication via BIO pair');
382 skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", 1
385 ok(run(test([@ssltest, "-bio_pair", @extra])),
386 'test sslv2/sslv3 via BIO pair');
390 skip "DTLSv1 is not supported by this OpenSSL build", 4
391 if disabled("dtls1");
393 ok(run(test([@ssltest, "-dtls1", @extra])),
395 ok(run(test([@ssltest, "-dtls1", "-server_auth", @CA, @extra])),
396 'test dtlsv1 with server authentication');
397 ok(run(test([@ssltest, "-dtls1", "-client_auth", @CA, @extra])),
398 'test dtlsv1 with client authentication');
399 ok(run(test([@ssltest, "-dtls1", "-server_auth", "-client_auth", @CA, @extra])),
400 'test dtlsv1 with both server and client authentication');
404 skip "DTLSv1.2 is not supported by this OpenSSL build", 4
405 if disabled("dtls1_2");
407 ok(run(test([@ssltest, "-dtls12", @extra])),
409 ok(run(test([@ssltest, "-dtls12", "-server_auth", @CA, @extra])),
410 'test dtlsv1.2 with server authentication');
411 ok(run(test([@ssltest, "-dtls12", "-client_auth", @CA, @extra])),
412 'test dtlsv1.2 with client authentication');
413 ok(run(test([@ssltest, "-dtls12", "-server_auth", "-client_auth", @CA, @extra])),
414 'test dtlsv1.2 with both server and client authentication');
418 skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", 8
422 skip "skipping test of sslv2/sslv3 w/o (EC)DHE test", 1 if $dsa_cert;
424 ok(run(test([@ssltest, "-bio_pair", "-no_dhe", "-no_ecdhe", @extra])),
425 'test sslv2/sslv3 w/o (EC)DHE via BIO pair');
428 ok(run(test([@ssltest, "-bio_pair", "-dhe1024dsa", "-v", @extra])),
429 'test sslv2/sslv3 with 1024bit DHE via BIO pair');
430 ok(run(test([@ssltest, "-bio_pair", "-server_auth", @CA, @extra])),
431 'test sslv2/sslv3 with server authentication');
432 ok(run(test([@ssltest, "-bio_pair", "-client_auth", @CA, @extra])),
433 'test sslv2/sslv3 with client authentication via BIO pair');
434 ok(run(test([@ssltest, "-bio_pair", "-server_auth", "-client_auth", @CA, @extra])),
435 'test sslv2/sslv3 with both client and server authentication via BIO pair');
436 ok(run(test([@ssltest, "-bio_pair", "-server_auth", "-client_auth", "-app_verify", @CA, @extra])),
437 'test sslv2/sslv3 with both client and server authentication via BIO pair and app verify');
440 skip "No IPv4 available on this machine", 1
441 unless !disabled("sock") && have_IPv4();
442 ok(run(test([@ssltest, "-ipv4", @extra])),
443 'test TLS via IPv4');
447 skip "No IPv6 available on this machine", 1
448 unless !disabled("sock") && have_IPv6();
449 ok(run(test([@ssltest, "-ipv6", @extra])),
450 'test TLS via IPv6');
455 subtest "Testing ciphersuites" => sub {
458 my $ciphers = "-EXP:-PSK:-SRP:-kDH:-kECDHe";
461 note "skipping DHE tests\n";
462 $ciphers .= ":-kDHE";
465 note "skipping DSA tests\n";
466 $ciphers .= ":-aDSA";
468 push @exkeys, "-s_cert", "certD.ss", "-s_key", "keyD.ss";
472 note "skipping EC tests\n";
473 $ciphers .= ":!aECDSA:!kECDH";
475 push @exkeys, "-s_cert", "certE.ss", "-s_key", "keyE.ss";
479 # FIXME: I feel unsure about the following line, is that really just TLSv1.2, or is it all of the SSLv3/TLS protocols?
480 push(@protocols, "TLSv1.2") unless $no_tls1_2;
481 push(@protocols, "SSLv3") unless $no_ssl3;
482 my $protocolciphersuitcount = 0;
485 map { split(/:/, $_) }
486 run(app(["openssl", "ciphers", "${_}:$ciphers"]),
488 map { s/\R//; } @c; # chomp @c;
489 $protocolciphersuitcount += scalar @c;
490 $_ => [ @c ] } @protocols;
492 plan skip_all => "None of the ciphersuites to test are available in this OpenSSL build"
493 if $protocolciphersuitcount + scalar(@protocols) == 0;
495 # The count of protocols is because in addition to the ciphersuits
496 # we got above, we're running a weak DH test for each protocol
497 plan tests => $protocolciphersuitcount + scalar(@protocols);
499 foreach my $protocol (@protocols) {
500 note "Testing ciphersuites for $protocol";
501 foreach my $cipher (@{$ciphersuites{$protocol}}) {
502 ok(run(test([@ssltest, @exkeys, "-cipher", $cipher,
503 $protocol eq "SSLv3" ? ("-ssl3") : ()])),
506 is(run(test([@ssltest,
508 "-c_cipher", 'EDH:@SECLEVEL=1',
510 $protocol eq "SSLv3" ? ("-ssl3") : ()])), 0,
511 "testing connection with weak DH, expecting failure");
515 subtest 'RSA/(EC)DHE/PSK tests' => sub {
516 ######################################################################
521 skip "TLSv1.0 is not supported by this OpenSSL build", 5
525 skip "skipping anonymous DH tests", 1
528 ok(run(test([@ssltest, "-v", "-bio_pair", "-tls1", "-cipher", "ADH", "-dhe1024dsa", "-num", "10", "-f", "-time", @extra])),
529 'test tlsv1 with 1024bit anonymous DH, multiple handshakes');
533 skip "skipping RSA tests", 2
536 ok(run(test(["ssltest_old", "-v", "-bio_pair", "-tls1", "-s_cert", srctop_file("apps","server2.pem"), "-no_dhe", "-no_ecdhe", "-num", "10", "-f", "-time", @extra])),
537 'test tlsv1 with 1024bit RSA, no (EC)DHE, multiple handshakes');
539 skip "skipping RSA+DHE tests", 1
542 ok(run(test(["ssltest_old", "-v", "-bio_pair", "-tls1", "-s_cert", srctop_file("apps","server2.pem"), "-dhe1024dsa", "-num", "10", "-f", "-time", @extra])),
543 'test tlsv1 with 1024bit RSA, 1024bit DHE, multiple handshakes');
547 skip "skipping PSK tests", 2
550 ok(run(test([@ssltest, "-tls1", "-cipher", "PSK", "-psk", "abc123", @extra])),
551 'test tls1 with PSK');
553 ok(run(test([@ssltest, "-bio_pair", "-tls1", "-cipher", "PSK", "-psk", "abc123", @extra])),
554 'test tls1 with PSK via BIO pair');
560 subtest 'Next Protocol Negotiation Tests' => sub {
561 ######################################################################
566 skip "TLSv1.0 is not supported by this OpenSSL build", 7
568 skip "Next Protocol Negotiation is not supported by this OpenSSL build", 7
569 if disabled("nextprotoneg");
571 ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_client"])));
572 ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_server"])));
573 ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_server_reject"])));
574 ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_client", "-npn_server_reject"])));
575 ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_client", "-npn_server"])));
576 ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_client", "-npn_server", "-num", "2"])));
577 ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_client", "-npn_server", "-num", "2", "-reuse"])));
581 subtest 'Custom Extension tests' => sub {
582 ######################################################################
587 skip "TLSv1.0 is not supported by this OpenSSL build", 1
590 ok(run(test([@ssltest, "-bio_pair", "-tls1", "-custom_ext"])),
591 'test tls1 with custom extensions');
595 subtest 'Serverinfo tests' => sub {
596 ######################################################################
601 skip "TLSv1.0 is not supported by this OpenSSL build", 5
604 note('echo test tls1 with serverinfo');
605 ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo])));
606 ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_sct"])));
607 ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_tack"])));
608 ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_sct", "-serverinfo_tack"])));
609 ok(run(test([@ssltest, "-bio_pair", "-tls1", "-custom_ext", "-serverinfo_file", $serverinfo, "-serverinfo_sct", "-serverinfo_tack"])));
613 subtest 'SNI tests' => sub {
618 skip "TLSv1.x is not supported by this OpenSSL build", 7
619 if $no_tls1 && $no_tls1_1 && $no_tls1_2;
621 ok(run(test([@ssltest, "-bio_pair", "-sn_client", "foo"])));
622 ok(run(test([@ssltest, "-bio_pair", "-sn_server1", "foo"])));
623 ok(run(test([@ssltest, "-bio_pair", "-sn_client", "foo", "-sn_server1", "foo", "-sn_expect1"])));
624 ok(run(test([@ssltest, "-bio_pair", "-sn_client", "foo", "-sn_server1", "bar", "-sn_expect1"])));
625 ok(run(test([@ssltest, "-bio_pair", "-sn_client", "foo", "-sn_server1", "foo", "-sn_server2", "bar", "-sn_expect1"])));
626 ok(run(test([@ssltest, "-bio_pair", "-sn_client", "bar", "-sn_server1", "foo", "-sn_server2", "bar", "-sn_expect2"])));
627 # Negative test - make sure it doesn't crash, and doesn't switch contexts
628 ok(run(test([@ssltest, "-bio_pair", "-sn_client", "foobar", "-sn_server1", "foo", "-sn_server2", "bar", "-sn_expect1"])));
632 subtest 'ALPN tests' => sub {
633 ######################################################################
638 skip "TLSv1.0 is not supported by this OpenSSL build", 13
641 ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "foo"])));
642 ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_server", "foo"])));
643 ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "foo", "-alpn_server", "foo", "-alpn_expected", "foo"])));
644 ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "foo,bar", "-alpn_server", "foo", "-alpn_expected", "foo"])));
645 ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "bar,foo", "-alpn_server", "foo", "-alpn_expected", "foo"])));
646 ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "bar,foo", "-alpn_server", "foo,bar", "-alpn_expected", "foo"])));
647 ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "bar,foo", "-alpn_server", "bar,foo", "-alpn_expected", "bar"])));
648 ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "foo,bar", "-alpn_server", "bar,foo", "-alpn_expected", "bar"])));
650 is(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "foo", "-alpn_server", "bar"])), 0,
651 "Testing ALPN with protocol mismatch, expecting failure");
652 is(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "baz", "-alpn_server", "bar,foo"])), 0,
653 "Testing ALPN with protocol mismatch, expecting failure");
656 ok(run(test([@ssltest, "-bio_pair",
657 "-alpn_client", "foo,bar", "-sn_client", "alice",
658 "-alpn_server1", "foo,123", "-sn_server1", "alice",
659 "-alpn_server2", "bar,456", "-sn_server2", "bob",
660 "-alpn_expected", "foo"])));
661 ok(run(test([@ssltest, "-bio_pair",
662 "-alpn_client", "foo,bar", "-sn_client", "bob",
663 "-alpn_server1", "foo,123", "-sn_server1", "alice",
664 "-alpn_server2", "bar,456", "-sn_server2", "bob",
665 "-alpn_expected", "bar"])));
666 ok(run(test([@ssltest, "-bio_pair",
667 "-alpn_client", "foo,bar", "-sn_client", "bob",
668 "-alpn_server2", "bar,456", "-sn_server2", "bob",
669 "-alpn_expected", "bar"])));
673 subtest 'SRP tests' => sub {
678 skip "skipping SRP tests", 4
681 ok(run(test([@ssltest, "-tls1", "-cipher", "SRP", "-srpuser", "test", "-srppass", "abc123"])),
682 'test tls1 with SRP');
684 ok(run(test([@ssltest, "-bio_pair", "-tls1", "-cipher", "SRP", "-srpuser", "test", "-srppass", "abc123"])),
685 'test tls1 with SRP via BIO pair');
687 ok(run(test([@ssltest, "-tls1", "-cipher", "aSRP", "-srpuser", "test", "-srppass", "abc123"])),
688 'test tls1 with SRP auth');
690 ok(run(test([@ssltest, "-bio_pair", "-tls1", "-cipher", "aSRP", "-srpuser", "test", "-srppass", "abc123"])),
691 'test tls1 with SRP auth via BIO pair');
695 subtest 'Multi-buffer tests' => sub {
696 ######################################################################
701 skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", 2
704 skip "skipping multi-buffer tests", 2
705 if @extra || (POSIX::uname())[4] ne "x86_64";
707 ok(run(test([@ssltest, "-cipher", "AES128-SHA", "-bytes", "8m"])));
709 # We happen to know that AES128-SHA256 is TLSv1.2 only... for now.
710 skip "TLSv1.2 is not supported by this OpenSSL configuration", 1
713 ok(run(test([@ssltest, "-cipher", "AES128-SHA256", "-bytes", "8m"])));
717 subtest 'DTLS Version min/max tests' => sub {
719 push(@protos, "dtls1") unless ($no_dtls1 || $no_dtls);
720 push(@protos, "dtls1.2") unless ($no_dtls1_2 || $no_dtls);
721 my @minprotos = (undef, @protos);
722 my @maxprotos = (@protos, undef);
723 my @shdprotos = (@protos, $protos[$#protos]);
724 my $n = ((@protos+2) * (@protos+3))/2 - 2;
725 my $ntests = $n * $n;
726 plan tests => $ntests;
728 skip "DTLS disabled", 1 if $ntests == 1;
731 for (my $smin = 0; $smin < @minprotos; ++$smin) {
732 for (my $smax = $smin ? $smin - 1 : 0; $smax < @maxprotos; ++$smax) {
733 for (my $cmin = 0; $cmin < @minprotos; ++$cmin) {
734 for (my $cmax = $cmin ? $cmin - 1 : 0; $cmax < @maxprotos; ++$cmax) {
735 if ($cmax < $smin-1) {
736 $should = "fail-server";
737 } elsif ($smax < $cmin-1) {
738 $should = "fail-client";
739 } elsif ($cmax > $smax) {
740 $should = $shdprotos[$smax];
742 $should = $shdprotos[$cmax];
745 my @args = (@ssltest, "-dtls");
746 push(@args, "-should_negotiate", $should);
747 push(@args, "-server_min_proto", $minprotos[$smin])
748 if (defined($minprotos[$smin]));
749 push(@args, "-server_max_proto", $maxprotos[$smax])
750 if (defined($maxprotos[$smax]));
751 push(@args, "-client_min_proto", $minprotos[$cmin])
752 if (defined($minprotos[$cmin]));
753 push(@args, "-client_max_proto", $maxprotos[$cmax])
754 if (defined($maxprotos[$cmax]));
755 my $ok = run(test[@args]);
757 print STDERR "\nsmin=$smin, smax=$smax, cmin=$cmin, cmax=$cmax\n";
758 print STDERR "\nFailed: @args\n";
764 subtest 'TLS session reuse' => sub {
768 skip "TLS1.1 or TLS1.2 disabled", 12 if $no_tls1_1 || $no_tls1_2;
769 ok(run(test([@ssltest, "-server_sess_out", $server_sess, "-client_sess_out", $client_sess])));
770 ok(run(test([@ssltest, "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "1", "-should_negotiate", "tls1.2"])));
771 ok(run(test([@ssltest, "-server_max_proto", "tls1.1", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "0", "-should_negotiate", "tls1.1"])));
773 ok(run(test([@ssltest, "-server_max_proto", "tls1.1", "-server_sess_out", $server_sess, "-client_sess_out", $client_sess])));
774 ok(run(test([@ssltest, "-server_max_proto", "tls1.1", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "1", "-should_negotiate", "tls1.1"])));
775 ok(run(test([@ssltest, "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "0", "-should_negotiate", "tls1.2"])));
777 ok(run(test([@ssltest, "-no_ticket", "-server_sess_out", $server_sess, "-client_sess_out", $client_sess])));
778 ok(run(test([@ssltest, "-no_ticket", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "1", "-should_negotiate", "tls1.2"])));
779 ok(run(test([@ssltest, "-no_ticket", "-server_max_proto", "tls1.1", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "0", "-should_negotiate", "tls1.1"])));
781 ok(run(test([@ssltest, "-no_ticket", "-server_max_proto", "tls1.1", "-server_sess_out", $server_sess, "-client_sess_out", $client_sess])));
782 ok(run(test([@ssltest, "-no_ticket", "-server_max_proto", "tls1.1", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "1", "-should_negotiate", "tls1.1"])));
783 ok(run(test([@ssltest, "-no_ticket", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "0", "-should_negotiate", "tls1.2"])));
787 subtest 'DTLS session reuse' => sub {
790 skip "DTLS disabled", 12 if $no_dtls;
792 ok(run(test([@ssltest, "-dtls", "-server_sess_out", $server_sess, "-client_sess_out", $client_sess])));
793 ok(run(test([@ssltest, "-dtls", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "1", "-should_negotiate", "dtls1.2"])));
794 ok(run(test([@ssltest, "-dtls", "-server_max_proto", "dtls1", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "0", "-should_negotiate", "dtls1"])));
796 ok(run(test([@ssltest, "-dtls", "-server_max_proto", "dtls1", "-server_sess_out", $server_sess, "-client_sess_out", $client_sess])));
797 ok(run(test([@ssltest, "-dtls", "-server_max_proto", "dtls1", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "1", "-should_negotiate", "dtls1"])));
798 ok(run(test([@ssltest, "-dtls", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "0", "-should_negotiate", "dtls1.2"])));
800 ok(run(test([@ssltest, "-dtls", "-no_ticket", "-server_sess_out", $server_sess, "-client_sess_out", $client_sess])));
801 ok(run(test([@ssltest, "-dtls", "-no_ticket", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "1", "-should_negotiate", "dtls1.2"])));
802 ok(run(test([@ssltest, "-dtls", "-no_ticket", "-server_max_proto", "dtls1", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "0", "-should_negotiate", "dtls1"])));
804 ok(run(test([@ssltest, "-dtls", "-no_ticket", "-server_max_proto", "dtls1", "-server_sess_out", $server_sess, "-client_sess_out", $client_sess])));
805 ok(run(test([@ssltest, "-dtls", "-no_ticket", "-server_max_proto", "dtls1", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "1", "-should_negotiate", "dtls1"])));
806 ok(run(test([@ssltest, "-dtls", "-no_ticket", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "0", "-should_negotiate", "dtls1.2"])));
810 subtest 'Certificate Transparency tests' => sub {
811 ######################################################################
816 skip "Certificate Transparency is not supported by this OpenSSL build", 3
818 skip "TLSv1.0 is not supported by this OpenSSL build", 3
821 $ENV{CTLOG_FILE} = srctop_file("test", "ct", "log_list.conf");
822 my @ca = qw(-CAfile certCA.ss);
823 ok(run(test([@ssltest, @ca, "-bio_pair", "-tls1", "-noct"])));
824 # No SCTs provided, so this should fail.
825 ok(run(test([@ssltest, @ca, "-bio_pair", "-tls1", "-ct",
826 "-should_negotiate", "fail-client"])));
827 # No SCTs provided, unverified chains still succeed.
828 ok(run(test([@ssltest, "-bio_pair", "-tls1", "-ct"])));