target/linux/sunxi/patches-4.9/0071-arm-sun8i-sunxi-h3-h5-add-dwmac-sun8i-ethernet-drive.patch

   1 From 0eba511a3cac29d6338b22b5b727f40cf8d163df Mon Sep 17 00:00:00 2001
   2 From: Corentin Labbe <clabbe.montjoie@gmail.com>
   3 Date: Wed, 31 May 2017 09:18:38 +0200
   4 Subject: arm: sun8i: sunxi-h3-h5: add dwmac-sun8i ethernet driver
   5
   6 The dwmac-sun8i is an ethernet MAC hardware that support 10/100/1000
   7 speed.
   8
   9 This patch enable the dwmac-sun8i on Allwinner H3/H5 SoC Device-tree.
  10 SoC H3/H5 have an internal PHY, so optionals syscon and ephy are set.
  11
  12 Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
  13 Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
  14 ---
  15  arch/arm/boot/dts/sunxi-h3-h5.dtsi | 34 ++++++++++++++++++++++++++++++++++
  16  1 file changed, 34 insertions(+)
  17
  18 --- a/arch/arm/boot/dts/sun8i-h3.dtsi
  19 +++ b/arch/arm/boot/dts/sun8i-h3.dtsi
  20 @@ -333,6 +333,14 @@
  21                         interrupt-controller;
  22                         #interrupt-cells = <3>;
  23
  24 +                       emac_rgmii_pins: emac0 {
  25 +                               pins = "PD0", "PD1", "PD2", "PD3", "PD4",
  26 +                                      "PD5", "PD7", "PD8", "PD9", "PD10",
  27 +                                      "PD12", "PD13", "PD15", "PD16", "PD17";
  28 +                               function = "emac";
  29 +                               drive-strength = <40>;
  30 +                       };
  31 +
  32                         i2c0_pins: i2c0 {
  33                                 allwinner,pins = "PA11", "PA12";
  34                                 allwinner,function = "i2c0";
  35 @@ -431,6 +439,32 @@
  36                         clocks = <&osc24M>;
  37                 };
  38
  39 +               emac: ethernet@1c30000 {
  40 +                       compatible = "allwinner,sun8i-h3-emac";
  41 +                       syscon = <&syscon>;
  42 +                       reg = <0x01c30000 0x104>;
  43 +                       interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
  44 +                       interrupt-names = "macirq";
  45 +                       resets = <&ccu RST_BUS_EMAC>;
  46 +                       reset-names = "stmmaceth";
  47 +                       clocks = <&ccu CLK_BUS_EMAC>;
  48 +                       clock-names = "stmmaceth";
  49 +                       #address-cells = <1>;
  50 +                       #size-cells = <0>;
  51 +                       status = "disabled";
  52 +
  53 +                       mdio: mdio {
  54 +                               #address-cells = <1>;
  55 +                               #size-cells = <0>;
  56 +                               int_mii_phy: ethernet-phy@1 {
  57 +                                       compatible = "ethernet-phy-ieee802.3-c22";
  58 +                                       reg = <1>;
  59 +                                       clocks = <&ccu CLK_BUS_EPHY>;
  60 +                                       resets = <&ccu RST_BUS_EPHY>;
  61 +                               };
  62 +                       };
  63 +               };
  64 +
  65                 wdt0: watchdog@01c20ca0 {
  66                         compatible = "allwinner,sun6i-a31-wdt";
  67                         reg = <0x01c20ca0 0x20>;