kernel: move console loglevel to generic
[oweals/openwrt.git] / target / linux / sunxi / patches-4.9 / 0061-arm64-allwinner-sun50i-a64-add-dwmac-sun8i-Ethernet-.patch
1 From e53f67e981bcc5547857475241b3a4a066955f8c Mon Sep 17 00:00:00 2001
2 From: Corentin Labbe <clabbe.montjoie@gmail.com>
3 Date: Wed, 31 May 2017 09:18:46 +0200
4 Subject: arm64: allwinner: sun50i-a64: add dwmac-sun8i Ethernet driver
5
6 The dwmac-sun8i is an Ethernet MAC that supports 10/100/1000 Mbit
7 connections. It is very similar to the device found in the Allwinner
8 H3, but lacks the internal 100 Mbit PHY and its associated control
9 bits.
10 This adds the necessary bits to the Allwinner A64 SoC .dtsi, but keeps
11 it disabled at this level.
12
13 Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
14 Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
15 ---
16  arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 35 +++++++++++++++++++++++++++
17  1 file changed, 35 insertions(+)
18
19 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
20 +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
21 @@ -284,6 +284,21 @@
22                                 bias-pull-up;
23                         };
24  
25 +                       rmii_pins: rmii_pins {
26 +                               pins = "PD10", "PD11", "PD13", "PD14", "PD17",
27 +                                      "PD18", "PD19", "PD20", "PD22", "PD23";
28 +                               function = "emac";
29 +                               drive-strength = <40>;
30 +                       };
31 +
32 +                       rgmii_pins: rgmii_pins {
33 +                               pins = "PD8", "PD9", "PD10", "PD11", "PD12",
34 +                                      "PD13", "PD15", "PD16", "PD17", "PD18",
35 +                                      "PD19", "PD20", "PD21", "PD22", "PD23";
36 +                               function = "emac";
37 +                               drive-strength = <40>;
38 +                       };
39 +
40                         uart0_pins_a: uart0@0 {
41                                 pins = "PB8", "PB9";
42                                 function = "uart0";
43 @@ -388,6 +403,26 @@
44                         #size-cells = <0>;
45                 };
46  
47 +               emac: ethernet@1c30000 {
48 +                       compatible = "allwinner,sun50i-a64-emac";
49 +                       syscon = <&syscon>;
50 +                       reg = <0x01c30000 0x100>;
51 +                       interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
52 +                       interrupt-names = "macirq";
53 +                       resets = <&ccu RST_BUS_EMAC>;
54 +                       reset-names = "stmmaceth";
55 +                       clocks = <&ccu CLK_BUS_EMAC>;
56 +                       clock-names = "stmmaceth";
57 +                       status = "disabled";
58 +                       #address-cells = <1>;
59 +                       #size-cells = <0>;
60 +
61 +                       mdio: mdio {
62 +                               #address-cells = <1>;
63 +                               #size-cells = <0>;
64 +                       };
65 +               };
66 +
67                 gic: interrupt-controller@1c81000 {
68                         compatible = "arm,gic-400";
69                         reg = <0x01c81000 0x1000>,