target/linux/sunxi/patches-4.14/201-ARM-dts-sun8i-fix-USB-Ethernet-of-Orange-Pi-R1.patch

   1 From b76dc5927f6442df913f03ed261c5bff18a98df6 Mon Sep 17 00:00:00 2001
   2 From: Icenowy Zheng <icenowy@aosc.io>
   3 Date: Thu, 28 Dec 2017 21:01:56 +0800
   4 Subject: [PATCH] ARM: dts: sun8i: fix USB Ethernet of Orange Pi R1
   5
   6 Orange Pi R1 uses a Realtek RTL8152B USB Ethernet chip, which is easily
   7 seen on the board but not show in the schematics. A regulator for the
   8 power of the RTL8152B chip is hidden, which uses the same pin with the
   9 Wi-Fi regulator on the original Orange Pi Zero.
  10
  11 Add this regulator back to the device tree, and bind it to USB1.
  12
  13 Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
  14 ---
  15  arch/arm/boot/dts/sun8i-h2-plus-orangepi-r1.dts | 18 ++++++++++++++++++
  16  1 file changed, 18 insertions(+)
  17
  18 --- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-r1.dts
  19 +++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-r1.dts
  20 @@ -49,6 +49,20 @@
  21
  22         /delete-node/ reg_vcc_wifi;
  23
  24 +       /*
  25 +        * Ths pin of this regulator is the same with the Wi-Fi extra
  26 +        * regulator on the original Zero. However it's used for USB
  27 +        * Ethernet rather than the Wi-Fi now.
  28 +        */
  29 +       reg_vcc_usb_eth: reg-vcc-usb-ethernet {
  30 +               compatible = "regulator-fixed";
  31 +               regulator-min-microvolt = <5000000>;
  32 +               regulator-max-microvolt = <5000000>;
  33 +               regulator-name = "vcc-usb-ethernet";
  34 +               enable-active-high;
  35 +               gpio = <&pio 0 20 GPIO_ACTIVE_HIGH>;
  36 +       };
  37 +
  38         aliases {
  39                 ethernet1 = &rtl8189etv;
  40         };
  41 @@ -71,3 +85,7 @@
  42                 reg = <1>;
  43         };
  44  };
  45 +
  46 +&usbphy {
  47 +       usb1_vbus-supply = <&reg_vcc_usb_eth>;
  48 +};