2 * linux/arch/arm/mach-s3c2442/mach-gta02.c
4 * S3C2442 Machine Support for the Openmoko Freerunner (GTA02)
6 * Copyright (C) 2006-2007 by Openmoko, Inc.
7 * Author: Harald Welte <laforge@openmoko.org>
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License as
12 * published by the Free Software Foundation; either version 2 of
13 * the License, or (at your option) any later version.
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
27 #include <linux/kernel.h>
28 #include <linux/types.h>
29 #include <linux/interrupt.h>
30 #include <linux/list.h>
31 #include <linux/delay.h>
32 #include <linux/timer.h>
33 #include <linux/init.h>
34 #include <linux/workqueue.h>
35 #include <linux/platform_device.h>
36 #include <linux/serial_core.h>
37 #include <linux/spi/spi.h>
38 #include <linux/spi/spi_bitbang.h>
39 #include <linux/mmc/host.h>
41 #include <linux/mtd/mtd.h>
42 #include <linux/mtd/nand.h>
43 #include <linux/mtd/nand_ecc.h>
44 #include <linux/mtd/partitions.h>
45 #include <linux/mtd/physmap.h>
47 #include <linux/i2c.h>
48 #include <linux/backlight.h>
49 #include <linux/regulator/machine.h>
51 #include <linux/mfd/pcf50633/core.h>
52 #include <linux/mfd/pcf50633/mbc.h>
53 #include <linux/mfd/pcf50633/adc.h>
54 #include <linux/mfd/pcf50633/gpio.h>
55 #include <linux/mfd/pcf50633/pmic.h>
57 #include <linux/lis302dl.h>
59 #include <asm/mach/arch.h>
60 #include <asm/mach/map.h>
61 #include <asm/mach/irq.h>
63 #include <mach/hardware.h>
66 #include <asm/mach-types.h>
68 #include <mach/regs-irq.h>
69 #include <mach/regs-gpio.h>
70 #include <mach/regs-gpioj.h>
75 #include <mach/spi-gpio.h>
76 #include <mach/regs-mem.h>
77 #include <mach/spi-gpio.h>
81 #include <mach/gta02.h>
83 #include <plat/regs-serial.h>
84 #include <plat/nand.h>
85 #include <plat/devs.h>
90 #include <plat/usb-control.h>
91 #include <plat/regs-timer.h>
93 #include <mach/gta02-pm-gsm.h>
94 #include <mach/gta02-pm-gps.h>
95 #include <mach/gta02-pm-wlan.h>
97 #include <linux/jbt6k74.h>
98 #include <linux/glamofb.h>
99 #include <linux/mfd/glamo.h>
100 #include <linux/spi/glamo.h>
102 #include <linux/hdq.h>
103 #include <linux/bq27000_battery.h>
105 #include <linux/touchscreen/ts_filter_chain.h>
106 #ifdef CONFIG_TOUCHSCREEN_FILTER
107 #include <linux/touchscreen/ts_filter_linear.h>
108 #include <linux/touchscreen/ts_filter_mean.h>
109 #include <linux/touchscreen/ts_filter_median.h>
110 #include <linux/touchscreen/ts_filter_group.h>
115 #include <linux/gta02-vibrator.h>
116 #include <linux/gta02-shadow.h>
118 /* arbitrates which sensor IRQ owns the shared SPI bus */
119 static spinlock_t motion_irq_lock;
122 /* -------------------------------------------------------------------------------
125 * Calls into vibrator and hdq and based on the return values
126 * determines if we the FIQ source be kept alive
129 #define DIVISOR_FROM_US(x) ((x) << 3)
131 #ifdef CONFIG_HDQ_GPIO_BITBANG
132 #define FIQ_DIVISOR_HDQ DIVISOR_FROM_US(HDQ_SAMPLE_PERIOD_US)
133 extern int hdq_fiq_handler(void);
136 #ifdef CONFIG_LEDS_GTA02_VIBRATOR
137 #define FIQ_DIVISOR_VIBRATOR DIVISOR_FROM_US(100)
138 extern int gta02_vibrator_fiq_handler(void);
141 #if defined(CONFIG_LEDS_GTA02_VIBRATOR) || defined(CONFIG_HDQ_GPIO_BITBANG)
143 /* Global data related to our fiq source */
144 static u32 gta02_fiq_ack_mask;
145 static struct s3c2410_pwm gta02_fiq_pwm_timer;
146 static u16 gta02_fiq_timer_index;
147 static int gta02_fiq_irq;
149 static void gta02_fiq_handler(void)
151 u16 divisor = 0xffff;
153 /* Vibrator servicing */
155 /* disable further timer interrupts if nobody has any work
156 * or adjust rate according to who still has work
158 * CAUTION: it means forground code must disable FIQ around
159 * its own non-atomic S3C2410_INTMSK changes... not common
160 * thankfully and taken care of by the fiq-basis patch
163 #ifdef CONFIG_LEDS_GTA02_VIBRATOR
164 if (gta02_vibrator_fiq_handler())
165 divisor = FIQ_DIVISOR_VIBRATOR;
168 #ifdef CONFIG_HDQ_GPIO_BITBANG
169 if (hdq_fiq_handler())
170 divisor = FIQ_DIVISOR_HDQ;
173 if (divisor == 0xffff) /* mask the fiq irq source */
174 __raw_writel(__raw_readl(S3C2410_INTMSK) | gta02_fiq_ack_mask,
176 else /* still working, maybe at a different rate */
177 __raw_writel(divisor, S3C2410_TCNTB(gta02_fiq_timer_index));
179 __raw_writel(gta02_fiq_ack_mask, S3C2410_SRCPND);
182 static void gta02_fiq_kick(void)
187 /* we have to take care about FIQ because this modification is
188 * non-atomic, FIQ could come in after the read and before the
189 * writeback and its changes to the register would be lost
190 * (platform INTMSK mod code is taken care of already)
192 local_save_flags(flags);
194 /* allow FIQs to resume */
195 __raw_writel(__raw_readl(S3C2410_INTMSK) &
196 ~(1 << (gta02_fiq_irq - S3C2410_CPUIRQ_OFFSET)),
198 tcon = __raw_readl(S3C2410_TCON) & ~S3C2410_TCON_T3START;
199 /* fake the timer to a count of 1 */
200 __raw_writel(1, S3C2410_TCNTB(gta02_fiq_timer_index));
201 __raw_writel(tcon | S3C2410_TCON_T3MANUALUPD, S3C2410_TCON);
202 __raw_writel(tcon | S3C2410_TCON_T3MANUALUPD | S3C2410_TCON_T3START,
204 __raw_writel(tcon | S3C2410_TCON_T3START, S3C2410_TCON);
205 local_irq_restore(flags);
208 static int gta02_fiq_enable(void)
210 int irq_index_fiq = IRQ_TIMER3;
215 gta02_fiq_irq = irq_index_fiq;
216 gta02_fiq_ack_mask = 1 << (irq_index_fiq - S3C2410_CPUIRQ_OFFSET);
217 gta02_fiq_timer_index = (irq_index_fiq - IRQ_TIMER0);
219 /* set up the timer to operate as a pwm device */
221 rc = s3c2410_pwm_init(>a02_fiq_pwm_timer);
225 gta02_fiq_pwm_timer.timerid = PWM0 + gta02_fiq_timer_index;
226 gta02_fiq_pwm_timer.prescaler = (6 - 1) / 2;
227 gta02_fiq_pwm_timer.divider = S3C2410_TCFG1_MUX3_DIV2;
228 /* default rate == ~32us */
229 gta02_fiq_pwm_timer.counter = gta02_fiq_pwm_timer.comparer = 3000;
231 rc = s3c2410_pwm_enable(>a02_fiq_pwm_timer);
235 s3c2410_pwm_start(>a02_fiq_pwm_timer);
237 /* let our selected interrupt be a magic FIQ interrupt */
238 __raw_writel(gta02_fiq_ack_mask, S3C2410_INTMOD);
240 /* it's ready to go as soon as we unmask the source in S3C2410_INTMSK */
243 set_fiq_c_handler(gta02_fiq_handler);
248 printk(KERN_ERR "Could not initialize FIQ for GTA02: %d\n", rc);
253 static void gta02_fiq_disable(void)
255 __raw_writel(0, S3C2410_INTMOD);
257 gta02_fiq_irq = 0; /* no active source interrupt now either */
260 /* -------------------- /GTA02 FIQ Handler ------------------------------------- */
265 * this gets called every 1ms when we paniced.
268 static long gta02_panic_blink(long count)
271 static long last_blink;
274 if (count - last_blink < 100) /* 200ms period, fast blink */
278 s3c2410_gpio_cfgpin(GTA02_GPIO_AUX_LED, S3C2410_GPIO_OUTPUT);
279 gta02_gpb_setpin(GTA02_GPIO_AUX_LED, led);
287 * returns PCB revision information in b9,b8 and b2,b1,b0
288 * Pre-GTA02 A6 returns 0x000
289 * GTA02 A6 returns 0x101
293 int gta02_get_pcb_revision(void)
297 static unsigned long pinlist[] = {
304 static int pin_offset[] = {
308 for (n = 0 ; n < ARRAY_SIZE(pinlist); n++) {
310 * set the PCB version GPIO to be pulled-down input
311 * force low briefly first
313 s3c2410_gpio_cfgpin(pinlist[n], S3C2410_GPIO_OUTPUT);
314 s3c2410_gpio_setpin(pinlist[n], 0);
315 /* misnomer: it is a pullDOWN in 2442 */
316 s3c2410_gpio_pullup(pinlist[n], 1);
317 s3c2410_gpio_cfgpin(pinlist[n], S3C2410_GPIO_INPUT);
321 if (s3c2410_gpio_getpin(pinlist[n]))
322 u |= 1 << pin_offset[n];
325 * when not being interrogated, all of the revision GPIO
326 * are set to output HIGH without pulldown so no current flows
327 * if they are NC or pulled up.
329 s3c2410_gpio_setpin(pinlist[n], 1);
330 s3c2410_gpio_cfgpin(pinlist[n], S3C2410_GPIO_OUTPUT);
331 /* misnomer: it is a pullDOWN in 2442 */
332 s3c2410_gpio_pullup(pinlist[n], 0);
338 struct platform_device gta02_resume_reason_device = {
339 .name = "gta02-resume",
343 static struct map_desc gta02_iodesc[] __initdata = {
345 .virtual = 0xe0000000,
346 .pfn = __phys_to_pfn(S3C2410_CS3+0x01000000),
352 #define UCON (S3C2410_UCON_DEFAULT | S3C2443_UCON_RXERR_IRQEN)
353 #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
354 #define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
356 static struct s3c2410_uartcfg gta02_uartcfgs[] = {
381 struct pcf50633 *gta02_pcf;
383 #ifdef CONFIG_CHARGER_PCF50633
384 #ifdef CONFIG_HDQ_GPIO_BITBANG
385 static int gta02_get_charger_online_status(void)
387 struct pcf50633 *pcf = gta02_pcf;
389 return pcf50633_mbc_get_status(pcf) & PCF50633_MBC_USB_ONLINE;
392 static int gta02_get_charger_active_status(void)
394 struct pcf50633 *pcf = gta02_pcf;
396 return pcf50633_mbc_get_status(pcf) & PCF50633_MBC_USB_ACTIVE;
400 #define ADC_NOM_CHG_DETECT_1A 6
401 #define ADC_NOM_CHG_DETECT_USB 43
404 gta02_configure_pmu_for_charger(struct pcf50633 *pcf, void *unused, int res)
408 /* Interpret charger type */
409 if (res < ((ADC_NOM_CHG_DETECT_USB + ADC_NOM_CHG_DETECT_1A) / 2)) {
411 /* Stop GPO driving out now that we have a IA charger */
412 pcf50633_gpio_set(pcf, PCF50633_GPO, 0);
418 pcf50633_mbc_usb_curlim_set(pcf, ma);
421 static struct delayed_work gta02_charger_work;
422 static int gta02_usb_vbus_draw;
424 static void gta02_charger_worker(struct work_struct *work)
426 struct pcf50633 *pcf = gta02_pcf;
428 if (gta02_usb_vbus_draw) {
429 pcf50633_mbc_usb_curlim_set(pcf, gta02_usb_vbus_draw);
432 #ifdef CONFIG_PCF50633_ADC
433 pcf50633_adc_async_read(pcf,
434 PCF50633_ADCC1_MUX_ADCIN1,
435 PCF50633_ADCC1_AVERAGE_16,
436 gta02_configure_pmu_for_charger, NULL);
438 /* If the PCF50633 ADC is disabled we fallback to a 100mA limit for safety. */
439 pcf50633_mbc_usb_curlim_set(pcf, 100);
445 #define GTA02_CHARGER_CONFIGURE_TIMEOUT ((3000 * HZ) / 1000)
446 static void gta02_pmu_event_callback(struct pcf50633 *pcf, int irq)
448 if (irq == PCF50633_IRQ_USBINS) {
449 schedule_delayed_work(>a02_charger_work,
450 GTA02_CHARGER_CONFIGURE_TIMEOUT);
452 } else if (irq == PCF50633_IRQ_USBREM) {
453 cancel_delayed_work_sync(>a02_charger_work);
454 gta02_usb_vbus_draw = 0;
458 static void gta02_pmu_force_shutdown(struct pcf50633 *pcf)
460 pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_OOCSHDWN,
461 PCF50633_OOCSHDWN_GOSTDBY, PCF50633_OOCSHDWN_GOSTDBY);
465 static void gta02_udc_vbus_draw(unsigned int ma)
470 gta02_usb_vbus_draw = ma;
472 schedule_delayed_work(>a02_charger_work,
473 GTA02_CHARGER_CONFIGURE_TIMEOUT);
476 static int gta02_udc_vbus_status(void)
478 struct pcf50633 *pcf = gta02_pcf;
482 return !!(pcf50633_mbc_get_status(pcf) & PCF50633_MBC_USB_ONLINE);
485 #else /* !CONFIG_CHARGER_PCF50633 */
486 #ifdef CONFIG_HDQ_GPIO_BITBANG
487 #define gta02_get_charger_online_status NULL
488 #define gta02_get_charger_active_status NULL
490 #define gta02_pmu_event_callback NULL
491 #define gta02_udc_vbus_draw NULL
492 #define gta02_udc_vbus_status NULL
496 static struct platform_device gta02_pm_gps_dev = {
497 .name = "gta02-pm-gps",
500 static struct platform_device gta02_pm_bt_dev = {
501 .name = "gta02-pm-bt",
504 static struct platform_device gta02_pm_gsm_dev = {
505 .name = "gta02-pm-gsm",
508 static struct platform_device gta02_pm_wlan_dev = {
509 .name = "gta02-pm-wlan",
512 /* this is called when pc50633 is probed, unfortunately quite late in the
513 * day since it is an I2C bus device. Here we can belatedly define some
514 * platform devices with the advantage that we can mark the pcf50633 as the
515 * parent. This makes them get suspended and resumed with their parent
516 * the pcf50633 still around.
519 static struct platform_device gta02_glamo_dev;
520 static void mangle_glamo_res_by_system_rev(void);
522 static void gta02_pmu_attach_child_devices(struct pcf50633 *pcf);
523 static void gta02_pmu_regulator_registered(struct pcf50633 *pcf, int id);
525 static struct regulator_consumer_supply ldo4_consumers[] = {
527 .dev = >a02_pm_bt_dev.dev,
532 static struct regulator_consumer_supply ldo5_consumers[] = {
534 .dev = >a02_pm_gps_dev.dev,
539 static struct regulator_consumer_supply hcldo_consumers[] = {
541 .dev = >a02_glamo_dev.dev,
546 static char *gta02_batteries[] = {
550 #ifdef CONFIG_CHARGER_PCF50633
552 struct pcf50633_platform_data gta02_pcf_pdata = {
554 [0] = PCF50633_INT1_USBINS |
555 PCF50633_INT1_USBREM |
557 [1] = PCF50633_INT2_ONKEYF,
558 [2] = PCF50633_INT3_ONKEY1S,
559 [3] = PCF50633_INT4_LOWSYS |
560 PCF50633_INT4_LOWBAT |
561 PCF50633_INT4_HIGHTMP,
564 .batteries = gta02_batteries,
565 .num_batteries = ARRAY_SIZE(gta02_batteries),
566 .charging_restart_interval = (900 * HZ),
567 .chg_ref_current_ma = 1000,
570 [PCF50633_REGULATOR_AUTO] = {
575 .valid_modes_mask = REGULATOR_MODE_NORMAL,
583 .num_consumer_supplies = 0,
585 [PCF50633_REGULATOR_DOWN1] = {
590 .valid_modes_mask = REGULATOR_MODE_NORMAL,
595 .num_consumer_supplies = 0,
597 [PCF50633_REGULATOR_DOWN2] = {
602 .valid_modes_mask = REGULATOR_MODE_NORMAL,
610 .num_consumer_supplies = 0,
612 [PCF50633_REGULATOR_HCLDO] = {
617 .valid_modes_mask = REGULATOR_MODE_NORMAL,
618 .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
621 .num_consumer_supplies = 1,
622 .consumer_supplies = hcldo_consumers,
624 [PCF50633_REGULATOR_LDO1] = {
626 .name = "GSENSOR_3V3",
629 .valid_modes_mask = REGULATOR_MODE_NORMAL,
632 .num_consumer_supplies = 0,
634 [PCF50633_REGULATOR_LDO2] = {
639 .valid_modes_mask = REGULATOR_MODE_NORMAL,
642 .num_consumer_supplies = 0,
644 [PCF50633_REGULATOR_LDO3] = {
648 .valid_modes_mask = REGULATOR_MODE_NORMAL,
651 .num_consumer_supplies = 0,
653 [PCF50633_REGULATOR_LDO4] = {
658 .valid_modes_mask = REGULATOR_MODE_NORMAL,
661 .num_consumer_supplies = 1,
662 .consumer_supplies = ldo4_consumers,
664 [PCF50633_REGULATOR_LDO5] = {
669 .valid_modes_mask = REGULATOR_MODE_NORMAL,
675 .num_consumer_supplies = 1,
676 .consumer_supplies = ldo5_consumers,
678 [PCF50633_REGULATOR_LDO6] = {
684 .valid_modes_mask = REGULATOR_MODE_NORMAL,
687 .num_consumer_supplies = 0,
689 [PCF50633_REGULATOR_MEMLDO] = {
693 .valid_modes_mask = REGULATOR_MODE_NORMAL,
698 .num_consumer_supplies = 0,
702 .probe_done = gta02_pmu_attach_child_devices,
703 .regulator_registered = gta02_pmu_regulator_registered,
704 .mbc_event_callback = gta02_pmu_event_callback,
705 .force_shutdown = gta02_pmu_force_shutdown,
708 static void mangle_pmu_pdata_by_system_rev(void)
710 struct regulator_init_data *reg_init_data;
712 reg_init_data = gta02_pcf_pdata.reg_init_data;
714 switch (S3C_SYSTEM_REV_ATAG) {
715 case GTA02v1_SYSTEM_REV:
716 /* FIXME: this is only in v1 due to wrong PMU variant */
717 reg_init_data[PCF50633_REGULATOR_DOWN2]
718 .constraints.state_mem.enabled = 1;
720 reg_init_data[PCF50633_REGULATOR_LDO1]
721 .constraints.min_uV = 1300000;
722 reg_init_data[PCF50633_REGULATOR_LDO1]
723 .constraints.max_uV = 1300000;
725 reg_init_data[PCF50633_REGULATOR_LDO5]
726 .constraints.min_uV = 1500000;
727 reg_init_data[PCF50633_REGULATOR_LDO5]
728 .constraints.max_uV = 1500000;
730 reg_init_data[PCF50633_REGULATOR_LDO6]
731 .constraints.min_uV = 0;
732 reg_init_data[PCF50633_REGULATOR_LDO6]
733 .constraints.max_uV = 3300000;
734 reg_init_data[PCF50633_REGULATOR_LDO6]
735 .constraints.apply_uV = 1;
744 #ifdef CONFIG_HDQ_GPIO_BITBANG
745 /* BQ27000 Battery */
747 struct bq27000_platform_data bq27000_pdata = {
750 .hdq_read = hdq_read,
751 .hdq_write = hdq_write,
752 .hdq_initialized = hdq_initialized,
753 .get_charger_online_status = gta02_get_charger_online_status,
754 .get_charger_active_status = gta02_get_charger_active_status
757 struct platform_device bq27000_battery_device = {
758 .name = "bq27000-battery",
760 .platform_data = &bq27000_pdata,
766 static void gta02_hdq_attach_child_devices(struct device *parent_device)
768 switch (S3C_SYSTEM_REV_ATAG) {
769 case GTA02v5_SYSTEM_REV:
770 case GTA02v6_SYSTEM_REV:
771 bq27000_battery_device.dev.parent = parent_device;
772 platform_device_register(&bq27000_battery_device);
779 static void gta02_hdq_gpio_direction_out(void)
781 s3c2410_gpio_cfgpin(GTA02v5_GPIO_HDQ, S3C2410_GPIO_OUTPUT);
784 static void gta02_hdq_gpio_direction_in(void)
786 s3c2410_gpio_cfgpin(GTA02v5_GPIO_HDQ, S3C2410_GPIO_INPUT);
789 static void gta02_hdq_gpio_set_value(int val)
792 s3c2410_gpio_setpin(GTA02v5_GPIO_HDQ, val);
795 static int gta02_hdq_gpio_get_value(void)
797 return s3c2410_gpio_getpin(GTA02v5_GPIO_HDQ);
800 static struct resource gta02_hdq_resources[] = {
802 .start = GTA02v5_GPIO_HDQ,
803 .end = GTA02v5_GPIO_HDQ,
807 struct hdq_platform_data gta02_hdq_platform_data = {
808 .attach_child_devices = gta02_hdq_attach_child_devices,
809 .gpio_dir_out = gta02_hdq_gpio_direction_out,
810 .gpio_dir_in = gta02_hdq_gpio_direction_in,
811 .gpio_set = gta02_hdq_gpio_set_value,
812 .gpio_get = gta02_hdq_gpio_get_value,
814 .enable_fiq = gta02_fiq_enable,
815 .disable_fiq = gta02_fiq_disable,
816 .kick_fiq = gta02_fiq_kick,
820 struct platform_device gta02_hdq_device = {
823 .resource = gta02_hdq_resources,
825 .platform_data = >a02_hdq_platform_data,
831 #ifdef CONFIG_LEDS_GTA02_VIBRATOR
832 /* vibrator (child of FIQ) */
834 static struct resource gta02_vibrator_resources[] = {
836 .start = GTA02_GPIO_VIBRATOR_ON,
837 .end = GTA02_GPIO_VIBRATOR_ON,
840 struct gta02_vib_platform_data gta02_vib_pdata = {
841 .enable_fiq = gta02_fiq_enable,
842 .disable_fiq = gta02_fiq_disable,
843 .kick_fiq = gta02_fiq_kick,
846 static struct platform_device gta02_vibrator_dev = {
847 .name = "gta02-vibrator",
848 .num_resources = ARRAY_SIZE(gta02_vibrator_resources),
849 .resource = gta02_vibrator_resources,
851 .platform_data = >a02_vib_pdata,
858 #define GTA02_FLASH_BASE S3C2410_CS3 /* GCS3 */
859 #define GTA02_FLASH_SIZE 0x200000 /* 2MBytes */
861 static struct physmap_flash_data gta02_nor_flash_data = {
865 static struct resource gta02_nor_flash_resource = {
866 .start = GTA02_FLASH_BASE,
867 .end = GTA02_FLASH_BASE + GTA02_FLASH_SIZE - 1,
868 .flags = IORESOURCE_MEM,
871 static struct platform_device gta02_nor_flash = {
872 .name = "physmap-flash",
875 .platform_data = >a02_nor_flash_data,
877 .resource = >a02_nor_flash_resource,
882 struct platform_device s3c24xx_pwm_device = {
883 .name = "s3c24xx_pwm",
887 static struct i2c_board_info gta02_i2c_devs[] __initdata = {
889 I2C_BOARD_INFO("pcf50633", 0x73),
890 .irq = GTA02_IRQ_PCF50633,
891 .platform_data = >a02_pcf_pdata,
894 I2C_BOARD_INFO("wm8753", 0x1a),
898 static struct s3c2410_nand_set gta02_nand_sets[] = {
900 .name = "neo1973-nand",
902 .flags = S3C2410_NAND_BBT,
906 /* choose a set of timings derived from S3C@2442B MCP54
907 * data sheet (K5D2G13ACM-D075 MCP Memory)
910 static struct s3c2410_platform_nand gta02_nand_info = {
914 .nr_sets = ARRAY_SIZE(gta02_nand_sets),
915 .sets = gta02_nand_sets,
920 static void gta02_s3c_mmc_set_power(unsigned char power_mode,
923 static int is_on = -1;
926 on = power_mode == MMC_POWER_ON || power_mode == MMC_POWER_UP;
928 gta02_wlan_reset(!on);
933 static struct s3c24xx_mci_pdata gta02_s3c_mmc_cfg = {
934 .set_power = gta02_s3c_mmc_set_power,
937 static void gta02_udc_command(enum s3c2410_udc_cmd_e cmd)
940 case S3C2410_UDC_P_ENABLE:
941 printk(KERN_DEBUG "%s S3C2410_UDC_P_ENABLE\n", __func__);
942 gta02_gpb_setpin(GTA02_GPIO_USB_PULLUP, 1);
944 case S3C2410_UDC_P_DISABLE:
945 printk(KERN_DEBUG "%s S3C2410_UDC_P_DISABLE\n", __func__);
946 gta02_gpb_setpin(GTA02_GPIO_USB_PULLUP, 0);
948 case S3C2410_UDC_P_RESET:
949 printk(KERN_DEBUG "%s S3C2410_UDC_P_RESET\n", __func__);
957 /* get PMU to set USB current limit accordingly */
959 static struct s3c2410_udc_mach_info gta02_udc_cfg = {
960 .vbus_draw = gta02_udc_vbus_draw,
961 .udc_command = gta02_udc_command,
962 /* .get_vbus_status = gta02_udc_vbus_status,*/
966 /* Touchscreen configuration. */
968 #ifdef CONFIG_TOUCHSCREEN_FILTER
969 const static struct ts_filter_group_configuration gta02_ts_group = {
972 .threshold = 6, /* At least half of the points in a group. */
976 const static struct ts_filter_median_configuration gta02_ts_median = {
978 .decimation_below = 3,
979 .decimation_threshold = 8 * 3,
980 .decimation_above = 4,
983 const static struct ts_filter_mean_configuration gta02_ts_mean = {
987 const static struct ts_filter_linear_configuration gta02_ts_linear = {
988 .constants = {1, 0, 0, 0, 1, 0, 1}, /* Don't modify coords. */
994 const static struct ts_filter_chain_configuration gta02_filter_configuration[] =
996 #ifdef CONFIG_TOUCHSCREEN_FILTER
997 {&ts_filter_group_api, >a02_ts_group.config},
998 {&ts_filter_median_api, >a02_ts_median.config},
999 {&ts_filter_mean_api, >a02_ts_mean.config},
1000 {&ts_filter_linear_api, >a02_ts_linear.config},
1005 const static struct s3c2410_ts_mach_info gta02_ts_cfg = {
1007 .presc = 0xff, /* slow as we can go */
1008 .filter_config = gta02_filter_configuration,
1013 static void gta02_bl_set_intensity(int intensity)
1015 struct pcf50633 *pcf = gta02_pcf;
1016 int old_intensity = pcf50633_reg_read(pcf, PCF50633_REG_LEDOUT);
1022 * One code path that leads here is from a kernel panic. Trying to turn
1023 * the backlight on just gives us a nearly endless stream of complaints
1024 * and accomplishes nothing. We can't win. Just give up.
1026 * In the unlikely event that there's another path leading here while
1027 * we're atomic, we print at least a warning.
1031 "gta02_bl_set_intensity called while atomic\n");
1035 if (!(pcf50633_reg_read(pcf, PCF50633_REG_LEDENA) & 3))
1038 old_intensity = pcf50633_reg_read(pcf, PCF50633_REG_LEDOUT);
1040 if (intensity == old_intensity)
1043 /* We can't do this anywhere else */
1044 pcf50633_reg_write(pcf, PCF50633_REG_LEDDIM, 5);
1047 * The PCF50633 cannot handle LEDOUT = 0 (datasheet p60)
1048 * if seen, you have to re-enable the LED unit
1050 if (!intensity || !old_intensity)
1051 pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 0);
1053 if (!intensity) /* illegal to set LEDOUT to 0 */
1054 ret = pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_LEDOUT, 0x3f,
1057 ret = pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_LEDOUT, 0x3f,
1061 pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 2);
1065 static struct generic_bl_info gta02_bl_info = {
1067 .max_intensity = 0xff,
1068 .default_intensity = 0xff,
1069 .set_bl_intensity = gta02_bl_set_intensity,
1072 static struct platform_device gta02_bl_dev = {
1073 .name = "generic-bl",
1076 .platform_data = >a02_bl_info,
1080 /* SPI: LCM control interface attached to Glamo3362 */
1082 static void gta02_jbt6k74_reset(int devidx, int level)
1084 glamo_lcm_reset(>a02_glamo_dev, level);
1087 static void gta02_jbt6k74_probe_completed(struct device *dev)
1089 struct pcf50633 *pcf = gta02_pcf;
1091 /* Switch on backlight. Qi does not do it for us */
1092 pcf50633_reg_write(pcf, PCF50633_REG_LEDOUT, 0x01);
1093 pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 0x00);
1094 pcf50633_reg_write(pcf, PCF50633_REG_LEDDIM, 0x01);
1095 pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 0x01);
1097 gta02_bl_dev.dev.parent = dev;
1098 platform_device_register(>a02_bl_dev);
1101 const struct jbt6k74_platform_data jbt6k74_pdata = {
1102 .reset = gta02_jbt6k74_reset,
1103 .probe_completed = gta02_jbt6k74_probe_completed,
1106 /*----------- SPI: Accelerometers attached to SPI of s3c244x ----------------- */
1108 void gta02_lis302dl_suspend_io(struct lis302dl_info *lis, int resume)
1110 struct lis302dl_platform_data *pdata = lis->pdata;
1114 * we don't want to power them with a high level
1115 * because GSENSOR_3V3 is not up during suspend
1117 s3c2410_gpio_setpin(pdata->pin_chip_select, 0);
1118 s3c2410_gpio_setpin(pdata->pin_clk, 0);
1119 s3c2410_gpio_setpin(pdata->pin_mosi, 0);
1120 /* misnomer: it is a pullDOWN in 2442 */
1121 s3c2410_gpio_pullup(pdata->pin_miso, 1);
1125 /* back to normal */
1126 s3c2410_gpio_setpin(pdata->pin_chip_select, 1);
1127 s3c2410_gpio_setpin(pdata->pin_clk, 1);
1128 /* misnomer: it is a pullDOWN in 2442 */
1129 s3c2410_gpio_pullup(pdata->pin_miso, 0);
1131 s3c2410_gpio_cfgpin(pdata->pin_chip_select, S3C2410_GPIO_OUTPUT);
1132 s3c2410_gpio_cfgpin(pdata->pin_clk, S3C2410_GPIO_OUTPUT);
1133 s3c2410_gpio_cfgpin(pdata->pin_mosi, S3C2410_GPIO_OUTPUT);
1134 s3c2410_gpio_cfgpin(pdata->pin_miso, S3C2410_GPIO_INPUT);
1138 struct lis302dl_platform_data lis302_pdata_top = {
1139 .name = "lis302-1 (top)",
1140 .pin_chip_select= S3C2410_GPD12,
1141 .pin_clk = S3C2410_GPG7,
1142 .pin_mosi = S3C2410_GPG6,
1143 .pin_miso = S3C2410_GPG5,
1144 .interrupt = GTA02_IRQ_GSENSOR_1,
1145 .open_drain = 1, /* altered at runtime by PCB rev */
1146 .lis302dl_suspend_io = gta02_lis302dl_suspend_io,
1149 struct lis302dl_platform_data lis302_pdata_bottom = {
1150 .name = "lis302-2 (bottom)",
1151 .pin_chip_select= S3C2410_GPD13,
1152 .pin_clk = S3C2410_GPG7,
1153 .pin_mosi = S3C2410_GPG6,
1154 .pin_miso = S3C2410_GPG5,
1155 .interrupt = GTA02_IRQ_GSENSOR_2,
1156 .open_drain = 1, /* altered at runtime by PCB rev */
1157 .lis302dl_suspend_io = gta02_lis302dl_suspend_io,
1160 static struct spi_board_info gta02_spi_board_info[] = {
1162 .modalias = "jbt6k74",
1164 .platform_data = &jbt6k74_pdata,
1165 /* controller_data */
1167 .max_speed_hz = 100 * 1000,
1172 .modalias = "lis302dl",
1174 .platform_data = &lis302_pdata_top,
1175 /* controller_data */
1177 .max_speed_hz = 100 * 1000,
1183 .modalias = "lis302dl",
1185 .platform_data = &lis302_pdata_bottom,
1186 /* controller_data */
1188 .max_speed_hz = 100 * 1000,
1195 static void gta02_lis302_chip_select(struct s3c2410_spigpio_info *info, int csid, int cs)
1199 * Huh... "quirk"... CS on this device is not really "CS" like you can
1202 * When it is 0 it selects SPI interface mode.
1203 * When it is 1 it selects I2C interface mode.
1205 * Because we have 2 devices on one interface we have to make sure
1206 * that the "disabled" device (actually in I2C mode) don't think we're
1209 * When we talk to the "enabled" device, the "disabled" device sees
1210 * the clocks as I2C clocks, creating havoc.
1212 * I2C sees MOSI going LOW while CLK HIGH as a START action, thus we
1213 * must ensure this is never issued.
1216 int cs_gpio, other_cs_gpio;
1218 cs_gpio = csid ? S3C2410_GPD13 : S3C2410_GPD12;
1219 other_cs_gpio = (1 - csid) ? S3C2410_GPD13 : S3C2410_GPD12;
1222 if (cs == BITBANG_CS_ACTIVE) {
1223 s3c2410_gpio_setpin(other_cs_gpio, 1);
1224 s3c2410_gpio_setpin(cs_gpio, 1);
1225 s3c2410_gpio_setpin(info->pin_clk, 1);
1226 s3c2410_gpio_setpin(cs_gpio, 0);
1228 s3c2410_gpio_setpin(cs_gpio, 1);
1229 s3c2410_gpio_setpin(other_cs_gpio, 1);
1233 static struct s3c2410_spigpio_info gta02_spigpio_cfg = {
1234 .pin_clk = S3C2410_GPG7,
1235 .pin_mosi = S3C2410_GPG6,
1236 .pin_miso = S3C2410_GPG5,
1238 .num_chipselect = 2,
1239 .chip_select = gta02_lis302_chip_select,
1240 .non_blocking_transfer = 1,
1243 static struct platform_device gta02_spi_gpio_dev = {
1244 .name = "spi_s3c24xx_gpio",
1246 .platform_data = >a02_spigpio_cfg,
1250 /*----------- / SPI: Accelerometers attached to SPI of s3c244x ----------------- */
1252 static struct resource gta02_led_resources[] = {
1254 .name = "gta02-power:orange",
1255 .start = GTA02_GPIO_PWR_LED1,
1256 .end = GTA02_GPIO_PWR_LED1,
1258 .name = "gta02-power:blue",
1259 .start = GTA02_GPIO_PWR_LED2,
1260 .end = GTA02_GPIO_PWR_LED2,
1262 .name = "gta02-aux:red",
1263 .start = GTA02_GPIO_AUX_LED,
1264 .end = GTA02_GPIO_AUX_LED,
1268 struct platform_device gta02_led_dev = {
1269 .name = "gta02-led",
1270 .num_resources = ARRAY_SIZE(gta02_led_resources),
1271 .resource = gta02_led_resources,
1274 static struct resource gta02_button_resources[] = {
1276 .start = GTA02_GPIO_AUX_KEY,
1277 .end = GTA02_GPIO_AUX_KEY,
1280 .start = GTA02_GPIO_HOLD_KEY,
1281 .end = GTA02_GPIO_HOLD_KEY,
1284 .start = GTA02_GPIO_JACK_INSERT,
1285 .end = GTA02_GPIO_JACK_INSERT,
1297 static struct platform_device gta02_button_dev = {
1298 .name = "gta02-button",
1299 .num_resources = ARRAY_SIZE(gta02_button_resources),
1300 .resource = gta02_button_resources,
1303 static struct platform_device gta02_pm_usbhost_dev = {
1304 .name = "gta02-pm-host",
1309 static struct s3c2410_hcd_info gta02_usb_info = {
1311 .flags = S3C_HCDFLG_USED,
1318 static int glamo_irq_is_wired(void)
1324 * GTA02 S-Media IRQs prior to A5 are broken due to a lack of
1325 * a pullup on the INT# line. Check for the bad behaviour.
1327 s3c2410_gpio_setpin(S3C2410_GPG4, 0);
1328 s3c2410_gpio_cfgpin(S3C2410_GPG4, S3C2410_GPG4_OUTP);
1329 s3c2410_gpio_cfgpin(S3C2410_GPG4, S3C2410_GPG4_INP);
1331 * we force it low ourselves for a moment and resume being input.
1332 * If there is a pullup, it won't stay low for long. But if the
1333 * level converter is there as on < A5 revision, the weak keeper
1334 * on the input of the LC will hold the line low indefinitiely
1337 rc = s3c2410_gpio_getpin(S3C2410_GPG4);
1338 while ((!rc) && ((count++) < 10));
1339 if (rc) { /* it got pulled back up, it's good */
1340 printk(KERN_INFO "Detected S-Media IRQ# pullup, "
1341 "enabling interrupt\n");
1343 } else /* Gah we can't work with this level converter */
1344 printk(KERN_WARNING "** Detected bad IRQ# circuit found"
1345 " on pre-A5 GTA02: S-Media interrupt disabled **\n");
1349 /* Smedia Glamo 3362 */
1352 * we crank down SD Card clock dynamically when GPS is powered
1355 static int gta02_glamo_mci_use_slow(void)
1357 return gta02_pm_gps_is_on();
1360 static void gta02_glamo_external_reset(int level)
1362 s3c2410_gpio_setpin(GTA02_GPIO_3D_RESET, level);
1363 s3c2410_gpio_cfgpin(GTA02_GPIO_3D_RESET, S3C2410_GPIO_OUTPUT);
1366 static struct fb_videomode gta02_glamo_modes[] = {
1378 .vmode = FB_VMODE_NONINTERLACED,
1390 .vmode = FB_VMODE_NONINTERLACED,
1394 static struct glamo_fb_platform_data gta02_glamo_fb_pdata = {
1398 .num_modes = ARRAY_SIZE(gta02_glamo_modes),
1399 .modes = gta02_glamo_modes,
1402 static struct glamo_spigpio_platform_data gta02_glamo_spigpio_pdata = {
1403 .pin_clk = GLAMO_GPIO10_OUTPUT,
1404 .pin_mosi = GLAMO_GPIO11_OUTPUT,
1405 .pin_cs = GLAMO_GPIO12_OUTPUT,
1410 static struct glamo_mmc_platform_data gta02_glamo_mmc_pdata = {
1411 .glamo_mmc_use_slow = gta02_glamo_mci_use_slow,
1414 static struct glamo_platform_data gta02_glamo_pdata = {
1415 .fb_data = >a02_glamo_fb_pdata,
1416 .spigpio_data = >a02_glamo_spigpio_pdata,
1417 .mmc_data = >a02_glamo_mmc_pdata,
1419 .osci_clock_rate = 32768,
1421 .glamo_irq_is_wired = glamo_irq_is_wired,
1422 .glamo_external_reset = gta02_glamo_external_reset,
1425 static struct resource gta02_glamo_resources[] = {
1427 .start = S3C2410_CS1,
1428 .end = S3C2410_CS1 + 0x1000000 - 1,
1429 .flags = IORESOURCE_MEM,
1432 .start = GTA02_IRQ_3D,
1433 .end = GTA02_IRQ_3D,
1434 .flags = IORESOURCE_IRQ,
1437 .start = GTA02_GPIO_3D_RESET,
1438 .end = GTA02_GPIO_3D_RESET,
1442 static struct platform_device gta02_glamo_dev = {
1443 .name = "glamo3362",
1444 .num_resources = ARRAY_SIZE(gta02_glamo_resources),
1445 .resource = gta02_glamo_resources,
1447 .platform_data = >a02_glamo_pdata,
1451 static void mangle_glamo_res_by_system_rev(void)
1453 switch (S3C_SYSTEM_REV_ATAG) {
1454 case GTA02v1_SYSTEM_REV:
1457 gta02_glamo_resources[2].start = GTA02_GPIO_3D_RESET;
1458 gta02_glamo_resources[2].end = GTA02_GPIO_3D_RESET;
1462 switch (S3C_SYSTEM_REV_ATAG) {
1463 case GTA02v1_SYSTEM_REV:
1464 case GTA02v2_SYSTEM_REV:
1465 case GTA02v3_SYSTEM_REV:
1466 /* case GTA02v4_SYSTEM_REV: - FIXME: handle this later */
1467 /* The hardware is missing a pull-up resistor and thus can't
1468 * support the Smedia Glamo IRQ */
1469 gta02_glamo_resources[1].start = 0;
1470 gta02_glamo_resources[1].end = 0;
1475 static void __init gta02_map_io(void)
1477 s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc));
1478 s3c24xx_init_clocks(12000000);
1479 s3c24xx_init_uarts(gta02_uartcfgs, ARRAY_SIZE(gta02_uartcfgs));
1482 static irqreturn_t gta02_modem_irq(int irq, void *param)
1484 /* printk(KERN_DEBUG "modem wakeup interrupt\n");*/
1485 gta_gsm_interrupts++;
1489 static irqreturn_t ar6000_wow_irq(int irq, void *param)
1491 /* printk(KERN_DEBUG "ar6000_wow interrupt\n");*/
1498 static char hardware_ecc_str[4] __initdata = "";
1500 static int __init hardware_ecc_setup(char *str)
1503 strlcpy(hardware_ecc_str, str, sizeof(hardware_ecc_str));
1507 __setup("hardware_ecc=", hardware_ecc_setup);
1509 /* these are the guys that don't need to be children of PMU */
1511 static struct platform_device *gta02_devices[] __initdata = {
1515 &s3c_device_usbgadget,
1519 &s3c24xx_pwm_device,
1521 >a02_pm_wlan_dev, /* not dependent on PMU */
1527 /* these guys DO need to be children of PMU */
1529 static struct platform_device *gta02_devices_pmu_children[] = {
1530 &s3c_device_ts, /* input 1 */
1532 >a02_pm_usbhost_dev,
1533 >a02_spi_gpio_dev, /* input 2 and 3 */
1534 >a02_button_dev, /* input 4 */
1535 >a02_resume_reason_device,
1538 static void gta02_pmu_regulator_registered(struct pcf50633 *pcf, int id)
1540 struct platform_device *regulator, *pdev;
1544 regulator = pcf->regulator_pdev[id];
1547 case PCF50633_REGULATOR_LDO4:
1548 pdev = >a02_pm_bt_dev;
1550 case PCF50633_REGULATOR_LDO5:
1551 pdev = >a02_pm_gps_dev;
1553 case PCF50633_REGULATOR_HCLDO:
1554 pdev = >a02_glamo_dev;
1560 pdev->dev.parent = ®ulator->dev;
1561 platform_device_register(pdev);
1564 /* this is called when pc50633 is probed, unfortunately quite late in the
1565 * day since it is an I2C bus device. Here we can belatedly define some
1566 * platform devices with the advantage that we can mark the pcf50633 as the
1567 * parent. This makes them get suspended and resumed with their parent
1568 * the pcf50633 still around.
1571 static void gta02_pmu_attach_child_devices(struct pcf50633 *pcf)
1575 for (n = 0; n < ARRAY_SIZE(gta02_devices_pmu_children); n++)
1576 gta02_devices_pmu_children[n]->dev.parent = pcf->dev;
1578 mangle_glamo_res_by_system_rev();
1579 platform_add_devices(gta02_devices_pmu_children,
1580 ARRAY_SIZE(gta02_devices_pmu_children));
1582 regulator_has_full_constraints();
1585 static void gta02_poweroff(void)
1587 pcf50633_reg_set_bit_mask(gta02_pcf, PCF50633_REG_OOCSHDWN,
1588 PCF50633_OOCSHDWN_GOSTDBY, PCF50633_OOCSHDWN_GOSTDBY);
1591 static void __init gta02_machine_init(void)
1595 /* set the panic callback to make AUX blink fast */
1596 panic_blink = gta02_panic_blink;
1598 switch (S3C_SYSTEM_REV_ATAG) {
1599 case GTA02v6_SYSTEM_REV:
1600 /* we need push-pull interrupt from motion sensors */
1601 lis302_pdata_top.open_drain = 0;
1602 lis302_pdata_bottom.open_drain = 0;
1608 spin_lock_init(&motion_irq_lock);
1610 #ifdef CONFIG_CHARGER_PCF50633
1611 INIT_DELAYED_WORK(>a02_charger_work, gta02_charger_worker);
1614 /* Glamo chip select optimization */
1615 /* *((u32 *)(S3C2410_MEMREG(((1 + 1) << 2)))) = 0x1280; */
1617 /* do not force soft ecc if we are asked to use hardware_ecc */
1618 if (hardware_ecc_str[0] == '1')
1619 gta02_nand_info.software_ecc = 0;
1621 s3c_device_usb.dev.platform_data = >a02_usb_info;
1622 s3c_device_nand.dev.platform_data = >a02_nand_info;
1623 s3c_device_sdi.dev.platform_data = >a02_s3c_mmc_cfg;
1625 /* acc sensor chip selects */
1626 s3c2410_gpio_setpin(S3C2410_GPD12, 1);
1627 s3c2410_gpio_cfgpin(S3C2410_GPD12, S3C2410_GPIO_OUTPUT);
1628 s3c2410_gpio_setpin(S3C2410_GPD13, 1);
1629 s3c2410_gpio_cfgpin(S3C2410_GPD13, S3C2410_GPIO_OUTPUT);
1631 s3c24xx_udc_set_platdata(>a02_udc_cfg);
1632 s3c_i2c0_set_platdata(NULL);
1633 set_s3c2410ts_info(>a02_ts_cfg);
1635 mangle_glamo_res_by_system_rev();
1637 i2c_register_board_info(0, gta02_i2c_devs, ARRAY_SIZE(gta02_i2c_devs));
1638 spi_register_board_info(gta02_spi_board_info,
1639 ARRAY_SIZE(gta02_spi_board_info));
1641 #ifdef CONFIG_CHARGER_PCF50633
1642 mangle_pmu_pdata_by_system_rev();
1645 platform_add_devices(gta02_devices, ARRAY_SIZE(gta02_devices));
1649 /* Make sure the modem can wake us up */
1650 set_irq_type(GTA02_IRQ_MODEM, IRQ_TYPE_EDGE_RISING);
1651 rc = request_irq(GTA02_IRQ_MODEM, gta02_modem_irq, IRQF_DISABLED,
1654 printk(KERN_ERR "GTA02: can't request GSM modem wakeup IRQ\n");
1655 enable_irq_wake(GTA02_IRQ_MODEM);
1657 /* Make sure the wifi module can wake us up*/
1658 set_irq_type(GTA02_IRQ_WLAN_GPIO1, IRQ_TYPE_EDGE_RISING);
1659 rc = request_irq(GTA02_IRQ_WLAN_GPIO1, ar6000_wow_irq, IRQF_DISABLED,
1663 printk(KERN_ERR "GTA02: can't request ar6k wakeup IRQ\n");
1664 enable_irq_wake(GTA02_IRQ_WLAN_GPIO1);
1666 pm_power_off = gta02_poweroff;
1668 /* Register the HDQ and vibrator as children of pwm device */
1669 #ifdef CONFIG_HDQ_GPIO_BITBANG
1670 gta02_hdq_device.dev.parent = &s3c24xx_pwm_device.dev;
1671 platform_device_register(>a02_hdq_device);
1673 #ifdef CONFIG_LEDS_GTA02_VIBRATOR
1674 gta02_vibrator_dev.dev.parent = &s3c24xx_pwm_device.dev;
1675 platform_device_register(>a02_vibrator_dev);
1679 void DEBUG_LED(int n)
1683 gta02_gpb_setpin(GTA02_GPIO_PWR_LED1, 1);
1686 gta02_gpb_setpin(GTA02_GPIO_PWR_LED2, 1);
1689 gta02_gpb_setpin(GTA02_GPIO_AUX_LED, 1);
1693 EXPORT_SYMBOL_GPL(DEBUG_LED);
1695 MACHINE_START(NEO1973_GTA02, "GTA02")
1696 .phys_io = S3C2410_PA_UART,
1697 .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
1698 .boot_params = S3C2410_SDRAM_PA + 0x100,
1699 .map_io = gta02_map_io,
1700 .init_irq = s3c24xx_init_irq,
1701 .init_machine = gta02_machine_init,
1702 .timer = &s3c24xx_timer,