2 * RouterBoard 500 Platform devices
4 * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
5 * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
17 #include <linux/kernel.h>
18 #include <linux/init.h>
19 #include <linux/ctype.h>
20 #include <linux/string.h>
21 #include <linux/platform_device.h>
22 #include <linux/mtd/nand.h>
23 #include <linux/mtd/mtd.h>
24 #include <linux/mtd/partitions.h>
26 #include <asm/rc32434/rc32434.h>
27 #include <asm/rc32434/dma.h>
28 #include <asm/rc32434/dma_v.h>
29 #include <asm/rc32434/eth.h>
30 #include <asm/rc32434/rb.h>
32 #define ETH0_DMA_RX_IRQ GROUP1_IRQ_BASE + 0
33 #define ETH0_DMA_TX_IRQ GROUP1_IRQ_BASE + 1
34 #define ETH0_RX_OVR_IRQ GROUP3_IRQ_BASE + 9
35 #define ETH0_TX_UND_IRQ GROUP3_IRQ_BASE + 10
37 #define ETH0_RX_DMA_ADDR (DMA0_PhysicalAddress + 0*DMA_CHAN_OFFSET)
38 #define ETH0_TX_DMA_ADDR (DMA0_PhysicalAddress + 1*DMA_CHAN_OFFSET)
40 /* NAND definitions */
41 #define MEM32(x) *((volatile unsigned *) (x))
43 #define GPIO_RDY (1 << 0x08)
44 #define GPIO_WPX (1 << 0x09)
45 #define GPIO_ALE (1 << 0x0a)
46 #define GPIO_CLE (1 << 0x0b)
48 extern char* board_type;
50 static struct resource korina_dev0_res[] = {
52 .name = "korina_regs",
53 .start = ETH0_PhysicalAddress,
54 .end = ETH0_PhysicalAddress + sizeof(ETH_t),
55 .flags = IORESOURCE_MEM,
58 .start = ETH0_DMA_RX_IRQ,
59 .end = ETH0_DMA_RX_IRQ,
60 .flags = IORESOURCE_IRQ
63 .start = ETH0_DMA_TX_IRQ,
64 .end = ETH0_DMA_TX_IRQ,
65 .flags = IORESOURCE_IRQ
68 .start = ETH0_RX_OVR_IRQ,
69 .end = ETH0_RX_OVR_IRQ,
70 .flags = IORESOURCE_IRQ
73 .start = ETH0_TX_UND_IRQ,
74 .end = ETH0_TX_UND_IRQ,
75 .flags = IORESOURCE_IRQ
77 .name = "korina_dma_rx",
78 .start = ETH0_RX_DMA_ADDR,
79 .end = ETH0_RX_DMA_ADDR + DMA_CHAN_OFFSET - 1,
80 .flags = IORESOURCE_MEM,
82 .name = "korina_dma_tx",
83 .start = ETH0_TX_DMA_ADDR,
84 .end = ETH0_TX_DMA_ADDR + DMA_CHAN_OFFSET - 1,
85 .flags = IORESOURCE_MEM,
89 static struct korina_device korina_dev0_data = {
91 .mac = {0xde, 0xca, 0xff, 0xc0, 0xff, 0xee}
94 static struct platform_device korina_dev0 = {
97 .dev.platform_data = &korina_dev0_data,
98 .resource = korina_dev0_res,
99 .num_resources = ARRAY_SIZE(korina_dev0_res),
102 #define CF_GPIO_NUM 13
104 static struct resource cf_slot0_res[] = {
106 .name = "cf_membase",
107 .flags = IORESOURCE_MEM
110 .start = (8 + 4 * 32 + CF_GPIO_NUM), /* 149 */
111 .end = (8 + 4 * 32 + CF_GPIO_NUM),
112 .flags = IORESOURCE_IRQ
116 static struct cf_device cf_slot0_data = {
120 static struct platform_device cf_slot0 = {
123 .dev.platform_data = &cf_slot0_data,
124 .resource = cf_slot0_res,
125 .num_resources = ARRAY_SIZE(cf_slot0_res),
128 /* Resources and device for NAND. There is no data needed and no irqs, so just define the memory used. */
129 int rb500_dev_ready(struct mtd_info *mtd)
131 return MEM32(IDT434_REG_BASE + GPIOD) & GPIO_RDY;
134 void rb500_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
136 struct nand_chip *chip = mtd->priv;
137 unsigned char orbits, nandbits;
139 if (ctrl & NAND_CTRL_CHANGE) {
141 orbits = (ctrl & NAND_CLE) << 1;
142 orbits |= (ctrl & NAND_ALE) >> 1;
144 nandbits = (~ctrl & NAND_CLE) << 1;
145 nandbits |= (~ctrl & NAND_ALE) >> 1;
147 changeLatchU5(orbits, nandbits);
149 if (cmd != NAND_CMD_NONE)
150 writeb(cmd, chip->IO_ADDR_W);
153 static struct resource nand_slot0_res[] = {
155 .name = "nand_membase",
156 .flags = IORESOURCE_MEM
160 struct platform_nand_data rb500_nand_data = {
161 .ctrl.dev_ready = rb500_dev_ready,
162 .ctrl.cmd_ctrl = rb500_cmd_ctrl,
165 static struct platform_device nand_slot0 = {
168 .resource = nand_slot0_res,
169 .num_resources = ARRAY_SIZE(nand_slot0_res),
170 .dev.platform_data = &rb500_nand_data,
173 static struct mtd_partition rb500_partition_info[] = {
175 .name = "Routerboard NAND boot",
177 .size = 4 * 1024 * 1024,
180 .offset = MTDPART_OFS_NXTBLK,
181 .size = MTDPART_SIZ_FULL,
186 static struct platform_device *rb500_devs[] = {
192 static void __init parse_mac_addr(char *macstr)
195 unsigned char result, value;
197 for (i = 0; i < 6; i++) {
200 if (i != 5 && *(macstr + 2) != ':')
203 for (j = 0; j < 2; j++) {
204 if (isxdigit(*macstr)
206 isdigit(*macstr) ? *macstr -
207 '0' : toupper(*macstr) - 'A' + 10) < 16) {
208 result = result * 16 + value;
215 korina_dev0_data.mac[i] = result;
220 /* DEVICE CONTROLLER 1 */
221 #define CFG_DC_DEV1 (void*)0xb8010010
222 #define CFG_DC_DEV2 (void*)0xb8010020
223 #define CFG_DC_DEVBASE 0x0
224 #define CFG_DC_DEVMASK 0x4
225 #define CFG_DC_DEVC 0x8
226 #define CFG_DC_DEVTC 0xC
228 /* NAND definitions */
229 #define NAND_CHIP_DELAY 25
231 static void __init rb500_nand_setup(void)
233 if (!strcmp(board_type, "500r5"))
234 changeLatchU5(LO_FOFF | LO_CEX, LO_ULED | LO_ALE | LO_CLE | LO_WPX);
236 changeLatchU5(LO_WPX | LO_FOFF | LO_CEX, LO_ULED | LO_ALE | LO_CLE);
240 static int __init plat_setup_devices(void)
242 /* Look for the CF card reader */
243 if (!readl(CFG_DC_DEV1 + CFG_DC_DEVMASK))
244 rb500_devs[1] = NULL;
246 cf_slot0_res[0].start =
247 readl(CFG_DC_DEV1 + CFG_DC_DEVBASE);
248 cf_slot0_res[0].end = cf_slot0_res[0].start + 0x1000;
251 /* Initialise the NAND device */
254 /* Read the NAND resources from the device controller */
255 nand_slot0_res[0].start = readl(CFG_DC_DEV2 + CFG_DC_DEVBASE);
256 nand_slot0_res[0].end = nand_slot0_res[0].start + 0x1000;
258 /* Setup NAND specific settings */
259 rb500_nand_data.chip.nr_chips = 1;
260 rb500_nand_data.chip.nr_partitions = ARRAY_SIZE(rb500_partition_info);
261 rb500_nand_data.chip.partitions = rb500_partition_info;
262 rb500_nand_data.chip.chip_delay = NAND_CHIP_DELAY;
263 rb500_nand_data.chip.options = NAND_NO_AUTOINCR;
265 return platform_add_devices(rb500_devs, ARRAY_SIZE(rb500_devs));
268 static int __init setup_kmac(char *s)
270 printk("korina mac = %s\n", s);
275 __setup("kmac=", setup_kmac);
277 arch_initcall(plat_setup_devices);