target/linux/ramips/patches-3.14/0052-i2c-MIPS-adds-ralink-I2C-driver.patch

   1 From 225f36695bb07dad9510f9affd79e63f1a44a195 Mon Sep 17 00:00:00 2001
   2 From: John Crispin <blogic@openwrt.org>
   3 Date: Sun, 27 Jul 2014 09:52:56 +0100
   4 Subject: [PATCH 52/57] i2c: MIPS: adds ralink I2C driver
   5
   6 Signed-off-by: John Crispin <blogic@openwrt.org>
   7 ---
   8  .../devicetree/bindings/i2c/i2c-ralink.txt         |   27 ++
   9  drivers/i2c/busses/Kconfig                         |    4 +
  10  drivers/i2c/busses/Makefile                        |    1 +
  11  drivers/i2c/busses/i2c-ralink.c                    |  274 ++++++++++++++++++++
  12  4 files changed, 306 insertions(+)
  13  create mode 100644 Documentation/devicetree/bindings/i2c/i2c-ralink.txt
  14  create mode 100644 drivers/i2c/busses/i2c-ralink.c
  15
  16 Index: linux-3.14.18/Documentation/devicetree/bindings/i2c/i2c-ralink.txt
  17 ===================================================================
  18 --- /dev/null   1970-01-01 00:00:00.000000000 +0000
  19 +++ linux-3.14.18/Documentation/devicetree/bindings/i2c/i2c-ralink.txt  2014-10-06 14:28:14.296590159 +0200
  20 @@ -0,0 +1,27 @@
  21 +I2C for Ralink platforms
  22 +
  23 +Required properties :
  24 +- compatible : Must be "link,rt3052-i2c"
  25 +- reg: physical base address of the controller and length of memory mapped
  26 +     region.
  27 +- #address-cells = <1>;
  28 +- #size-cells = <0>;
  29 +
  30 +Optional properties:
  31 +- Child nodes conforming to i2c bus binding
  32 +
  33 +Example :
  34 +
  35 +palmbus@10000000 {
  36 +       i2c@900 {
  37 +               compatible = "link,rt3052-i2c";
  38 +               reg = <0x900 0x100>;
  39 +               #address-cells = <1>;
  40 +               #size-cells = <0>;
  41 +
  42 +               hwmon@4b {
  43 +                       compatible = "national,lm92";
  44 +                       reg = <0x4b>;
  45 +               };
  46 +       };
  47 +};
  48 Index: linux-3.14.18/drivers/i2c/busses/Kconfig
  49 ===================================================================
  50 --- linux-3.14.18.orig/drivers/i2c/busses/Kconfig       2014-09-06 01:34:59.000000000 +0200
  51 +++ linux-3.14.18/drivers/i2c/busses/Kconfig    2014-10-06 14:28:14.296590159 +0200
  52 @@ -659,6 +659,10 @@
  53           This driver can also be built as a module.  If so, the module
  54           will be called i2c-riic.
  55
  56 +config I2C_RALINK
  57 +       tristate "Ralink I2C Controller"
  58 +       select OF_I2C
  59 +
  60  config HAVE_S3C2410_I2C
  61         bool
  62         help
  63 Index: linux-3.14.18/drivers/i2c/busses/Makefile
  64 ===================================================================
  65 --- linux-3.14.18.orig/drivers/i2c/busses/Makefile      2014-09-06 01:34:59.000000000 +0200
  66 +++ linux-3.14.18/drivers/i2c/busses/Makefile   2014-10-06 14:28:14.296590159 +0200
  67 @@ -63,6 +63,7 @@
  68  obj-$(CONFIG_I2C_PUV3)         += i2c-puv3.o
  69  obj-$(CONFIG_I2C_PXA)          += i2c-pxa.o
  70  obj-$(CONFIG_I2C_PXA_PCI)      += i2c-pxa-pci.o
  71 +obj-$(CONFIG_I2C_RALINK)       += i2c-ralink.o
  72  obj-$(CONFIG_I2C_RIIC)         += i2c-riic.o
  73  obj-$(CONFIG_I2C_S3C2410)      += i2c-s3c2410.o
  74  obj-$(CONFIG_I2C_S6000)                += i2c-s6000.o
  75 Index: linux-3.14.18/drivers/i2c/busses/i2c-ralink.c
  76 ===================================================================
  77 --- /dev/null   1970-01-01 00:00:00.000000000 +0000
  78 +++ linux-3.14.18/drivers/i2c/busses/i2c-ralink.c       2014-10-06 15:53:32.416500362 +0200
  79 @@ -0,0 +1,298 @@
  80 +/*
  81 + * drivers/i2c/busses/i2c-ralink.c
  82 + *
  83 + * Copyright (C) 2013 Steven Liu <steven_liu@mediatek.com>
  84 + *
  85 + * Improve driver for i2cdetect from i2c-tools to detect i2c devices on the bus.
  86 + * (C) 2014 Sittisak <sittisaks@hotmail.com>
  87 + *
  88 + * This software is licensed under the terms of the GNU General Public
  89 + * License version 2, as published by the Free Software Foundation, and
  90 + * may be copied, distributed, and modified under those terms.
  91 + *
  92 + * This program is distributed in the hope that it will be useful,
  93 + * but WITHOUT ANY WARRANTY; without even the implied warranty of
  94 + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  95 + * GNU General Public License for more details.
  96 + *
  97 + */
  98 +
  99 +#include <linux/interrupt.h>
 100 +#include <linux/kernel.h>
 101 +#include <linux/module.h>
 102 +#include <linux/reset.h>
 103 +#include <linux/delay.h>
 104 +#include <linux/slab.h>
 105 +#include <linux/init.h>
 106 +#include <linux/errno.h>
 107 +#include <linux/platform_device.h>
 108 +#include <linux/i2c.h>
 109 +#include <linux/io.h>
 110 +#include <linux/of_i2c.h>
 111 +#include <linux/err.h>
 112 +
 113 +#include <asm/mach-ralink/ralink_regs.h>
 114 +
 115 +#define REG_CONFIG_REG         0x00
 116 +#define REG_CLKDIV_REG         0x04
 117 +#define REG_DEVADDR_REG                0x08
 118 +#define REG_ADDR_REG           0x0C
 119 +#define REG_DATAOUT_REG                0x10
 120 +#define REG_DATAIN_REG         0x14
 121 +#define REG_STATUS_REG         0x18
 122 +#define REG_STARTXFR_REG       0x1C
 123 +#define REG_BYTECNT_REG                0x20
 124 +
 125 +#define I2C_STARTERR           BIT(4)
 126 +#define I2C_ACKERR             BIT(3)
 127 +#define I2C_DATARDY            BIT(2)
 128 +#define I2C_SDOEMPTY           BIT(1)
 129 +#define I2C_BUSY               BIT(0)
 130 +
 131 +#define I2C_DEVADLEN_7         (6 << 2)
 132 +#define I2C_ADDRDIS            BIT(1)
 133 +
 134 +#define I2C_RETRY              0x1000
 135 +
 136 +#define CLKDIV_VALUE           200 // clock rate is 40M, 40M / (200*2) = 100k (standard i2c bus rate).
 137 +//#define CLKDIV_VALUE         50 // clock rate is 40M, 40M / (50*2) = 400k (fast i2c bus rate).
 138 +
 139 +#define READ_CMD               0x01
 140 +#define WRITE_CMD              0x00
 141 +#define READ_BLOCK              64
 142 +
 143 +static void __iomem *membase;
 144 +static struct i2c_adapter *adapter;
 145 +
 146 +static void rt_i2c_w32(u32 val, unsigned reg)
 147 +{
 148 +       iowrite32(val, membase + reg);
 149 +}
 150 +
 151 +static u32 rt_i2c_r32(unsigned reg)
 152 +{
 153 +       return ioread32(membase + reg);
 154 +}
 155 +
 156 +static inline int rt_i2c_get_ack(void)
 157 +{
 158 +        return (rt_i2c_r32(REG_STATUS_REG) & I2C_ACKERR) ? -EIO : 0;
 159 +}
 160 +
 161 +static inline int rt_i2c_wait_rx_done(void)
 162 +{
 163 +       int retries = I2C_RETRY;
 164 +
 165 +       do {
 166 +               if (!retries--)
 167 +                       break;
 168 +       } while(!(rt_i2c_r32(REG_STATUS_REG) & I2C_DATARDY));
 169 +
 170 +       return (retries < 0) ? -ETIMEDOUT : 0;
 171 +}
 172 +
 173 +static inline int rt_i2c_wait_idle(void)
 174 +{
 175 +       int retries = I2C_RETRY;
 176 +
 177 +       do {
 178 +               if (!retries--)
 179 +                       break;
 180 +       } while(rt_i2c_r32(REG_STATUS_REG) & I2C_BUSY);
 181 +
 182 +       return (retries < 0);
 183 +}
 184 +
 185 +static inline int rt_i2c_wait_tx_done(void)
 186 +{
 187 +       int retries = I2C_RETRY;
 188 +
 189 +       do {
 190 +               if (!retries--)
 191 +                       break;
 192 +       } while(!(rt_i2c_r32(REG_STATUS_REG) & I2C_SDOEMPTY));
 193 +
 194 +       return (retries < 0) ? -ETIMEDOUT : 0;
 195 +}
 196 +
 197 +static int rt_i2c_handle_msg(struct i2c_adapter *a, struct i2c_msg* msg)
 198 +{
 199 +       int i = 0, j = 0, pos = 0;
 200 +       int nblock = msg->len / READ_BLOCK;
 201 +        int rem = msg->len % READ_BLOCK;
 202 +       int ret = 0;
 203 +       /*printk("i2c handle msg len:%d\n",msg->len);*/
 204 +       if (msg->flags & I2C_M_TEN) {
 205 +               printk("10 bits addr not supported\n");
 206 +               return -EINVAL;
 207 +       }
 208 +
 209 +       if (msg->flags & I2C_M_RD) {
 210 +               for (i = 0; i < nblock; i++) {
 211 +                       if (rt_i2c_wait_idle()) {
 212 +                                   printk("i2c-read line busy\n");
 213 +                           return -ETIMEDOUT;
 214 +                       }
 215 +                       rt_i2c_w32(READ_BLOCK - 1, REG_BYTECNT_REG);
 216 +                       rt_i2c_w32(READ_CMD, REG_STARTXFR_REG);
 217 +                       for (j = 0; j < READ_BLOCK; j++) {
 218 +                               if (rt_i2c_wait_rx_done()<0) ret = rt_i2c_wait_rx_done();
 219 +                                if (rt_i2c_get_ack()<0)      ret = rt_i2c_get_ack();
 220 +                               msg->buf[pos++] = rt_i2c_r32(REG_DATAIN_REG);
 221 +                       }
 222 +               }
 223 +
 224 +               if (rt_i2c_wait_idle()) {
 225 +                       printk("i2c-read line busy\n");
 226 +                       return -ETIMEDOUT;
 227 +               }
 228 +               if (rem){
 229 +               rt_i2c_w32(rem - 1, REG_BYTECNT_REG);
 230 +               rt_i2c_w32(READ_CMD, REG_STARTXFR_REG);
 231 +               }
 232 +               for (i = 0; i < rem; i++) {
 233 +                       if (rt_i2c_wait_rx_done()<0) ret = rt_i2c_wait_rx_done();
 234 +                        if (rt_i2c_get_ack()     <0) ret = rt_i2c_get_ack();
 235 +
 236 +                       msg->buf[pos++] = rt_i2c_r32(REG_DATAIN_REG);
 237 +               }
 238 +       } else {
 239 +               if (rt_i2c_wait_idle()) {
 240 +                       printk("i2c-write line busy\n");
 241 +                       return -ETIMEDOUT;
 242 +               }
 243 +               rt_i2c_w32(msg->len - 1, REG_BYTECNT_REG);
 244 +               for (i = 0; i < msg->len; i++) {
 245 +                       rt_i2c_w32(msg->buf[i], REG_DATAOUT_REG);
 246 +                       rt_i2c_w32(WRITE_CMD, REG_STARTXFR_REG);
 247 +
 248 +                       if (rt_i2c_wait_tx_done()<0) ret = rt_i2c_wait_tx_done();
 249 +                        if (rt_i2c_get_ack()<0)      ret = rt_i2c_get_ack();
 250 +
 251 +
 252 +               }
 253 +       }
 254 +
 255 +       return ret;
 256 +}
 257 +
 258 +static int rt_i2c_master_xfer(struct i2c_adapter *a, struct i2c_msg *m, int n)
 259 +{
 260 +       int i = 0;
 261 +       int ret = 0;
 262 +
 263 +       if (rt_i2c_wait_idle()) {
 264 +               printk("i2c-master_xfer line busy\n");
 265 +               return -ETIMEDOUT;
 266 +       }
 267 +
 268 +       device_reset(a->dev.parent);
 269 +
 270 +       rt_i2c_w32(m->addr, REG_DEVADDR_REG);
 271 +       rt_i2c_w32(I2C_DEVADLEN_7 | I2C_ADDRDIS, REG_CONFIG_REG);
 272 +       rt_i2c_w32(CLKDIV_VALUE, REG_CLKDIV_REG);
 273 +
 274 +       for (i = 0; i < n && !ret; i++) {
 275 +               ret = rt_i2c_handle_msg(a, &m[i]);
 276 +
 277 +               if (ret < 0) {
 278 +                       return ret;
 279 +               }
 280 +       }
 281 +
 282 +       return n;
 283 +}
 284 +
 285 +static u32 rt_i2c_func(struct i2c_adapter *a)
 286 +{
 287 +       return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
 288 +}
 289 +
 290 +static const struct i2c_algorithm rt_i2c_algo = {
 291 +       .master_xfer    = rt_i2c_master_xfer,
 292 +       .functionality  = rt_i2c_func,
 293 +};
 294 +
 295 +static int rt_i2c_probe(struct platform_device *pdev)
 296 +{
 297 +       struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 298 +       int ret;
 299 +
 300 +       if (!res) {
 301 +               dev_err(&pdev->dev, "no memory resource found\n");
 302 +               return -ENODEV;
 303 +       }
 304 +
 305 +       adapter = devm_kzalloc(&pdev->dev, sizeof(struct i2c_adapter), GFP_KERNEL);
 306 +       if (!adapter) {
 307 +               dev_err(&pdev->dev, "failed to allocate i2c_adapter\n");
 308 +               return -ENOMEM;
 309 +       }
 310 +
 311 +       membase = devm_request_and_ioremap(&pdev->dev, res);
 312 +       if (IS_ERR(membase))
 313 +               return PTR_ERR(membase);
 314 +
 315 +       strlcpy(adapter->name, dev_name(&pdev->dev), sizeof(adapter->name));
 316 +       adapter->owner = THIS_MODULE;
 317 +       adapter->nr = pdev->id;
 318 +       adapter->timeout = HZ;
 319 +       adapter->algo = &rt_i2c_algo;
 320 +       adapter->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
 321 +       adapter->dev.parent = &pdev->dev;
 322 +       adapter->dev.of_node = pdev->dev.of_node;
 323 +
 324 +       ret = i2c_add_numbered_adapter(adapter);
 325 +       if (ret)
 326 +               return ret;
 327 +
 328 +       of_i2c_register_devices(adapter);
 329 +
 330 +       platform_set_drvdata(pdev, adapter);
 331 +
 332 +       dev_info(&pdev->dev, "loaded\n");
 333 +
 334 +       return 0;
 335 +}
 336 +
 337 +static int rt_i2c_remove(struct platform_device *pdev)
 338 +{
 339 +       platform_set_drvdata(pdev, NULL);
 340 +
 341 +       return 0;
 342 +}
 343 +
 344 +static const struct of_device_id i2c_rt_dt_ids[] = {
 345 +       { .compatible = "ralink,rt2880-i2c", },
 346 +       { /* sentinel */ }
 347 +};
 348 +
 349 +MODULE_DEVICE_TABLE(of, i2c_rt_dt_ids);
 350 +
 351 +static struct platform_driver rt_i2c_driver = {
 352 +       .probe          = rt_i2c_probe,
 353 +       .remove         = rt_i2c_remove,
 354 +       .driver         = {
 355 +               .owner  = THIS_MODULE,
 356 +               .name   = "i2c-ralink",
 357 +               .of_match_table = i2c_rt_dt_ids,
 358 +       },
 359 +};
 360 +
 361 +static int __init i2c_rt_init (void)
 362 +{
 363 +       return platform_driver_register(&rt_i2c_driver);
 364 +}
 365 +subsys_initcall(i2c_rt_init);
 366 +
 367 +static void __exit i2c_rt_exit (void)
 368 +{
 369 +       platform_driver_unregister(&rt_i2c_driver);
 370 +}
 371 +
 372 +module_exit (i2c_rt_exit);
 373 +
 374 +MODULE_AUTHOR("Steven Liu <steven_liu@mediatek.com>");
 375 +MODULE_DESCRIPTION("Ralink I2c host driver");
 376 +MODULE_LICENSE("GPL");
 377 +MODULE_ALIAS("platform:Ralink-I2C");