ramips: add kernel support for ALL0256N
[librecmc/librecmc.git] / target / linux / ramips / files / arch / mips / ralink / rt305x / mach-all0256n.c
1 /*
2  *  Allnet ALL0256N board support
3  *
4  *  Copyright (C) 2012 Daniel Golle <dgolle@allnet.de>
5  *
6  *  This program is free software; you can redistribute it and/or modify it
7  *  under the terms of the GNU General Public License version 2 as published
8  *  by the Free Software Foundation.
9  */
10
11 #include <linux/init.h>
12 #include <linux/platform_device.h>
13 #include <linux/spi/spi.h>
14 #include <linux/spi/flash.h>
15 #include <linux/mtd/mtd.h>
16 #include <linux/mtd/partitions.h>
17 #include <linux/mtd/physmap.h>
18
19 #include <asm/mach-ralink/machine.h>
20 #include <asm/mach-ralink/dev-gpio-buttons.h>
21 #include <asm/mach-ralink/dev-gpio-leds.h>
22 #include <asm/mach-ralink/rt305x.h>
23 #include <asm/mach-ralink/rt305x_regs.h>
24
25 #include "devices.h"
26
27 #define ALL0256N_GPIO_BUTTON_RESET 0
28 #define ALL0256N_GPIO_LED_RSSI_LOW 14
29 #define ALL0256N_GPIO_LED_RSSI_MED 12
30 #define ALL0256N_GPIO_LED_RSSI_HIGH 13
31 #define ALL0256N_BUTTONS_POLL_INTERVAL 20
32
33 #ifdef CONFIG_MTD_PARTITIONS
34 static struct mtd_partition all0256n_partitions[] = {
35         {
36                 .name   = "u-boot",
37                 .offset = 0,
38                 .size   = 0x030000,
39                 .mask_flags = MTD_WRITEABLE,
40         }, {
41                 .name   = "u-boot-env",
42                 .offset = 0x030000,
43                 .size   = 0x010000,
44         }, {
45                 .name   = "factory",
46                 .offset = 0x040000,
47                 .size   = 0x010000,
48         }, {
49                 .name   = "kernel",
50                 .offset = 0x050000,
51                 .size   = 0x0D0000,
52         }, {
53                 .name   = "rootfs",
54                 .offset = 0x120000,
55                 .size   = 0x2E0000,
56         }, {
57                 .name   = "firmware",
58                 .offset = 0x050000,
59                 .size   = 0x3B0000,
60         }
61 };
62 #endif /* CONFIG_MTD_PARTITIONS */
63
64
65 const struct flash_platform_data all0256n_flash = {
66         .type           = "mx25l3205d",
67 #ifdef CONFIG_MTD_PARTITIONS
68         .parts          = all0256n_partitions,
69         .nr_parts       = ARRAY_SIZE(all0256n_partitions),
70 #endif
71 };
72
73 struct spi_board_info all0256n_spi_slave_info[] __initdata = {
74         {
75                 .modalias       = "m25p80",
76                 .platform_data  = &all0256n_flash,
77                 .irq            = -1,
78                 .max_speed_hz   = 10000000,
79                 .bus_num        = 0,
80                 .chip_select    = 0,
81         },
82 };
83
84 static struct gpio_button all0256n_gpio_buttons[] __initdata = {
85         {
86                 .desc           = "reset",
87                 .type           = EV_KEY,
88                 .code           = KEY_RESTART,
89                 .threshold      = 3,
90                 .gpio           = ALL0256N_GPIO_BUTTON_RESET,
91                 .active_low     = 1,
92         }
93 };
94
95 static struct gpio_led all0256n_leds_gpio[] __initdata = {
96         {
97                 .name           = "all0256n:green:rssilow",
98                 .gpio           = ALL0256N_GPIO_LED_RSSI_LOW,
99                 .active_low     = 1,
100         }, {
101                 .name           = "all0256n:green:rssimed",
102                 .gpio           = ALL0256N_GPIO_LED_RSSI_MED,
103                 .active_low     = 1,
104         }, {
105                 .name           = "all0256n:green:rssihigh",
106                 .gpio           = ALL0256N_GPIO_LED_RSSI_HIGH,
107                 .active_low     = 1,
108         }
109 };
110
111 static void __init all0256n_init(void)
112 {
113         rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
114         rt305x_register_spi(all0256n_spi_slave_info,
115                             ARRAY_SIZE(all0256n_spi_slave_info));
116         rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL;
117         rt305x_register_ethernet();
118         ramips_register_gpio_leds(-1, ARRAY_SIZE(all0256n_leds_gpio),
119                                   all0256n_leds_gpio);
120         ramips_register_gpio_buttons(-1, ALL0256N_BUTTONS_POLL_INTERVAL,
121                                      ARRAY_SIZE(all0256n_gpio_buttons),
122                                      all0256n_gpio_buttons);
123         rt305x_register_wifi();
124         rt305x_register_wdt();
125 }
126
127 MIPS_MACHINE(RAMIPS_MACH_ALL0256N, "ALL0256N", "Allnet ALL0256N",
128              all0256n_init);