target/linux/ramips/dts/rt5350_zyxel_keenetic-start.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include "rt5350.dtsi"
   5
   6 #include <dt-bindings/gpio/gpio.h>
   7 #include <dt-bindings/input/input.h>
   8
   9 / {
  10         compatible = "zyxel,keenetic-start", "ralink,rt5350-soc";
  11         model = "ZyXEL Keenetic Start";
  12
  13         aliases {
  14                 led-boot = &led_status;
  15                 led-failsafe = &led_status;
  16                 led-running = &led_status;
  17                 led-upgrade = &led_status;
  18                 label-mac-device = &ethernet;
  19         };
  20
  21         leds {
  22                 compatible = "gpio-leds";
  23
  24                 led_status: power {
  25                         label = "zyxel:green:power";
  26                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  27                 };
  28
  29                 internet {
  30                         label = "zyxel:green:internet";
  31                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  32                 };
  33         };
  34
  35         keys {
  36                 compatible = "gpio-keys-polled";
  37                 poll-interval = <20>;
  38
  39                 reset {
  40                         label = "reset";
  41                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  42                         linux,code = <KEY_RESTART>;
  43                 };
  44
  45                 wps {
  46                         label = "wps";
  47                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  48                         linux,code = <KEY_WPS_BUTTON>;
  49                 };
  50         };
  51 };
  52
  53 &spi0 {
  54         status = "okay";
  55
  56         flash@0 {
  57                 compatible = "jedec,spi-nor";
  58                 reg = <0>;
  59                 spi-max-frequency = <10000000>;
  60
  61                 partitions {
  62                         compatible = "fixed-partitions";
  63                         #address-cells = <1>;
  64                         #size-cells = <1>;
  65
  66                         partition@0 {
  67                                 label = "u-boot";
  68                                 reg = <0x0 0x30000>;
  69                                 read-only;
  70                         };
  71
  72                         partition@30000 {
  73                                 label = "u-boot-env";
  74                                 reg = <0x30000 0x10000>;
  75                                 read-only;
  76                         };
  77
  78                         factory: partition@40000 {
  79                                 label = "factory";
  80                                 reg = <0x40000 0x10000>;
  81                                 read-only;
  82                         };
  83
  84                         partition@50000 {
  85                                 compatible = "denx,uimage";
  86                                 label = "firmware";
  87                                 reg = <0x50000 0x3b0000>;
  88                         };
  89                 };
  90         };
  91 };
  92
  93 &state_default {
  94         gpio {
  95                 groups = "i2c", "jtag", "uartf";
  96                 function = "gpio";
  97         };
  98 };
  99
 100 &ethernet {
 101         mtd-mac-address = <&factory 0x28>;
 102 };
 103
 104 &esw {
 105         mediatek,portmap = <0x2f>;
 106         mediatek,led_polarity = <0x17>;
 107 };
 108
 109 &wmac {
 110         status = "okay";
 111         ralink,led-polarity = <1>;
 112         ralink,mtd-eeprom = <&factory 0>;
 113 };