target/linux/ramips/dts/rt5350_wansview_ncs601w.dts

   1 /dts-v1/;
   2
   3 #include "rt5350.dtsi"
   4
   5 / {
   6         compatible = "wansview,ncs601w", "ralink,rt5350-soc";
   7         model = "Wansview NCS601W";
   8 };
   9
  10 &spi0 {
  11         status = "okay";
  12
  13         m25p80@0 {
  14                 compatible = "jedec,spi-nor";
  15                 reg = <0>;
  16                 spi-max-frequency = <10000000>;
  17
  18                 partitions {
  19                         compatible = "fixed-partitions";
  20                         #address-cells = <1>;
  21                         #size-cells = <1>;
  22
  23                         partition@0 {
  24                                 label = "u-boot";
  25                                 reg = <0x0 0x30000>;
  26                                 read-only;
  27                         };
  28
  29                         partition@30000 {
  30                                 label = "u-boot-env";
  31                                 reg = <0x30000 0x10000>;
  32                                 read-only;
  33                         };
  34
  35                         factory: partition@40000 {
  36                                 label = "factory";
  37                                 reg = <0x40000 0x10000>;
  38                                 read-only;
  39                         };
  40
  41                         partition@50000 {
  42                                 compatible = "denx,uimage";
  43                                 label = "firmware";
  44                                 reg = <0x50000 0x7b0000>;
  45                         };
  46                 };
  47         };
  48 };
  49
  50 &state_default {
  51         gpio {
  52                 ralink,group = "i2c", "jtag", "uartf";
  53                 ralink,function = "gpio";
  54         };
  55 };
  56
  57 &ethernet {
  58         mtd-mac-address = <&factory 0x4>;
  59 };
  60
  61 &esw {
  62         mediatek,portmap = <0x2f>;
  63 };
  64
  65 &wmac {
  66         ralink,mtd-eeprom = <&factory 0>;
  67 };
  68
  69 &ehci {
  70         status = "okay";
  71 };
  72
  73 &ohci {
  74         status = "okay";
  75 };