target/linux/ramips/dts/rt5350_poray_x5.dts

   1 /dts-v1/;
   2
   3 #include "rt5350.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "poray,x5", "ralink,rt5350-soc";
  10         model = "Poray X5";
  11
  12         aliases {
  13                 led-boot = &led_power;
  14                 led-failsafe = &led_power;
  15                 led-running = &led_power;
  16                 led-upgrade = &led_power;
  17         };
  18
  19         leds {
  20                 compatible = "gpio-leds";
  21
  22                 led_power: power {
  23                         label = "x5:green:power";
  24                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  25                 };
  26
  27                 20 {
  28                         label = "x5:green:20";
  29                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
  30                 };
  31
  32                 50 {
  33                         label = "x5:green:50";
  34                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  35                 };
  36
  37                 80 {
  38                         label = "x5:green:80";
  39                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
  40                 };
  41         };
  42
  43         keys {
  44                 compatible = "gpio-keys-polled";
  45                 poll-interval = <20>;
  46
  47                 bat {
  48                         label = "bat";
  49                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  50                         linux,code = <KEY_WPS_BUTTON>;
  51                 };
  52
  53                 reset {
  54                         label = "reset";
  55                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  56                         linux,code = <KEY_RESTART>;
  57                 };
  58
  59                 mode {
  60                         label = "mode";
  61                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  62                         linux,code = <BTN_0>;
  63                         linux,input-type = <EV_SW>;
  64                 };
  65         };
  66
  67         gpio_export {
  68                 compatible = "gpio-export";
  69                 #size-cells = <0>;
  70
  71                 usb-mode {
  72                         gpio-export,name = "usb-mode";
  73                         gpio-export,output = <0>;
  74                         gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
  75                 };
  76         };
  77 };
  78
  79 &spi0 {
  80         status = "okay";
  81
  82         m25p80@0 {
  83                 compatible = "jedec,spi-nor";
  84                 reg = <0>;
  85                 spi-max-frequency = <10000000>;
  86
  87                 partitions {
  88                         compatible = "fixed-partitions";
  89                         #address-cells = <1>;
  90                         #size-cells = <1>;
  91
  92                         partition@0 {
  93                                 label = "u-boot";
  94                                 reg = <0x0 0x30000>;
  95                                 read-only;
  96                         };
  97
  98                         partition@30000 {
  99                                 label = "u-boot-env";
 100                                 reg = <0x30000 0x10000>;
 101                                 read-only;
 102                         };
 103
 104                         factory: partition@40000 {
 105                                 label = "factory";
 106                                 reg = <0x40000 0x10000>;
 107                                 read-only;
 108                         };
 109
 110                         partition@50000 {
 111                                 compatible = "denx,uimage";
 112                                 label = "firmware";
 113                                 reg = <0x50000 0x7b0000>;
 114                         };
 115                 };
 116         };
 117 };
 118
 119 &state_default {
 120         gpio {
 121                 ralink,group = "i2c", "jtag", "uartf";
 122                 ralink,function = "gpio";
 123         };
 124 };
 125
 126 &ethernet {
 127         mtd-mac-address = <&factory 0x4>;
 128 };
 129
 130 &esw {
 131         mediatek,portmap = <0x2f>;
 132         mediatek,led_polarity = <1>;
 133 };
 134
 135 &wmac {
 136         ralink,mtd-eeprom = <&factory 0>;
 137         ralink,led-polarity = <1>;
 138 };
 139
 140 &ehci {
 141         status = "okay";
 142 };
 143
 144 &ohci {
 145         status = "okay";
 146 };