ramips: add support for TP-Link RE200 v1
[oweals/openwrt.git] / target / linux / ramips / dts / rt5350_poray_m3.dts
1 /dts-v1/;
2
3 #include "rt5350.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9         compatible = "poray,m3", "ralink,rt5350-soc";
10         model = "Poray M3";
11
12         aliases {
13                 led-boot = &led_status;
14                 led-failsafe = &led_status;
15                 led-running = &led_status;
16                 led-upgrade = &led_status;
17         };
18
19         leds {
20                 compatible = "gpio-leds";
21
22                 led_status: status {
23                         label = "m3:blue:status";
24                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
25                 };
26         };
27
28         keys {
29                 compatible = "gpio-keys-polled";
30                 poll-interval = <20>;
31
32                 reset {
33                         label = "reset";
34                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
35                         linux,code = <KEY_RESTART>;
36                 };
37
38                 mode {
39                         label = "mode";
40                         gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
41                         linux,code = <BTN_0>;
42                         linux,input-type = <EV_SW>;
43                 };
44         };
45 };
46
47 &spi0 {
48         status = "okay";
49
50         m25p80@0 {
51                 compatible = "jedec,spi-nor";
52                 reg = <0>;
53                 spi-max-frequency = <10000000>;
54
55                 partitions {
56                         compatible = "fixed-partitions";
57                         #address-cells = <1>;
58                         #size-cells = <1>;
59
60                         partition@0 {
61                                 label = "u-boot";
62                                 reg = <0x0 0x30000>;
63                                 read-only;
64                         };
65
66                         partition@30000 {
67                                 label = "u-boot-env";
68                                 reg = <0x30000 0x10000>;
69                                 read-only;
70                         };
71
72                         factory: partition@40000 {
73                                 label = "factory";
74                                 reg = <0x40000 0x10000>;
75                                 read-only;
76                         };
77
78                         partition@50000 {
79                                 compatible = "denx,uimage";
80                                 label = "firmware";
81                                 reg = <0x50000 0x3b0000>;
82                         };
83                 };
84         };
85 };
86
87 &state_default {
88         gpio {
89                 ralink,group = "i2c", "jtag", "uartf";
90                 ralink,function = "gpio";
91         };
92 };
93
94 &ethernet {
95         mtd-mac-address = <&factory 0x4>;
96 };
97
98 &esw {
99         mediatek,portmap = <0x2f>;
100         mediatek,led_polarity = <1>;
101 };
102
103 &wmac {
104         ralink,mtd-eeprom = <&factory 0>;
105         ralink,led-polarity = <1>;
106 };
107
108 &ehci {
109         status = "okay";
110 };
111
112 &ohci {
113         status = "okay";
114 };