ramips: add support for XiaoYu XY-C5
[oweals/openwrt.git] / target / linux / ramips / dts / rt5350_airlive_air3gii.dts
1 /dts-v1/;
2
3 #include "rt5350.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9         compatible = "airlive,air3gii", "ralink,rt5350-soc";
10         model = "AirLive Air3GII";
11
12         leds {
13                 compatible = "gpio-leds";
14
15                 wlan {
16                         label = "air3gii:green:wlan";
17                         gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
18                 };
19
20                 mobile {
21                         label = "air3gii:green:mobile";
22                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
23                         trigger-sources = <&ohci_port1>, <&ehci_port1>;
24                         linux,default-trigger = "usbport";
25                 };
26         };
27
28         keys {
29                 compatible = "gpio-keys-polled";
30                 poll-interval = <20>;
31
32                 wps {
33                         label = "wps";
34                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
35                         linux,code = <KEY_WPS_BUTTON>;
36                 };
37         };
38 };
39
40 &gpio0 {
41         status = "okay";
42 };
43
44 &spi0 {
45         status = "okay";
46
47         m25p80@0 {
48                 compatible = "jedec,spi-nor";
49                 reg = <0>;
50                 spi-max-frequency = <10000000>;
51
52                 partitions {
53                         compatible = "fixed-partitions";
54                         #address-cells = <1>;
55                         #size-cells = <1>;
56
57                         partition@0 {
58                                 label = "u-boot";
59                                 reg = <0x0 0x30000>;
60                                 read-only;
61                         };
62
63                         partition@30000 {
64                                 label = "u-boot-env";
65                                 reg = <0x30000 0x10000>;
66                                 read-only;
67                         };
68
69                         factory: partition@40000 {
70                                 label = "factory";
71                                 reg = <0x40000 0x10000>;
72                                 read-only;
73                         };
74
75                         partition@50000 {
76                                 compatible = "denx,uimage";
77                                 label = "firmware";
78                                 reg = <0x50000 0x3b0000>;
79                         };
80                 };
81         };
82 };
83
84 &pinctrl {
85         state_default: pinctrl0 {
86                 gpio {
87                         ralink,group = "i2c", "jtag", "uartf";
88                         ralink,function = "gpio";
89                 };
90         };
91 };
92
93 &ethernet {
94         mtd-mac-address = <&factory 0x4>;
95 };
96
97 &esw {
98         mediatek,portmap = <0x2f>;
99 };
100
101 &wmac {
102         ralink,mtd-eeprom = <&factory 0>;
103 };