target/linux/ramips/dts/rt3883_sitecom_wlr-6000.dts

   1 /dts-v1/;
   2
   3 #include "rt3883.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "sitecom,wlr-6000", "ralink,rt3883-soc";
  10         model = "Sitecom WLR-6000";
  11
  12         aliases {
  13                 led-boot = &led_power;
  14                 led-failsafe = &led_power;
  15                 led-running = &led_power;
  16                 led-upgrade = &led_power;
  17         };
  18
  19         keys {
  20                 compatible = "gpio-keys-polled";
  21                 poll-interval = <20>;
  22
  23                 reset {
  24                         label = "reset";
  25                         gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
  26                         linux,code = <KEY_RESTART>;
  27                 };
  28         };
  29
  30         leds {
  31                 compatible = "gpio-leds";
  32
  33                 led_power: power {
  34                         label = "wlr-6000:red:power";
  35                         gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
  36                 };
  37
  38                 ops {
  39                         label = "wlr-6000:white:ops";
  40                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  41                 };
  42         };
  43
  44         gpio_export {
  45                 compatible = "gpio-export";
  46                 #size-cells = <0>;
  47
  48                 usb {
  49                         gpio-export,name = "usb";
  50                         gpio-export,output = <1>;
  51                         gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
  52                 };
  53         };
  54 };
  55
  56 &gpio1 {
  57         status = "okay";
  58 };
  59
  60 &state_default {
  61         gpio {
  62                 ralink,group = "i2c", "jtag", "uartf";
  63                 ralink,function = "gpio";
  64         };
  65 };
  66
  67 &ethernet {
  68         status = "okay";
  69         mtd-mac-address = <&factory 0x8004>;
  70         mtd-mac-address-increment = <1>;
  71
  72         port@0 {
  73                 phy-handle = <&phy0>;
  74                 phy-mode = "rgmii";
  75         };
  76
  77         mdio-bus {
  78                 status = "okay";
  79
  80                 phy0: ethernet-phy@0 {
  81                         reg = <0>;
  82                         phy-mode = "rgmii";
  83
  84                         qca,ar8327-initvals = <
  85                                 0x04 0x07600000 /* PORT0 PAD MODE CTRL */
  86                                 0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
  87                                 0x10 0x40000000 /* Power-on Strapping: 176-pin interface configuration */
  88                                 0x50 0xc437c437 /* LED Control Register 0 */
  89                                 0x54 0xc337c337 /* LED Control Register 1 */
  90                                 0x58 0x00000000 /* LED Control Register 2 */
  91                                 0x5c 0x03ffff00 /* LED Control Register 3 */
  92                                 0x7c 0x0000007e /* PORT0_STATUS */
  93                                 0x94 0x0000007e /* PORT6 STATUS */
  94                         >;
  95                 };
  96         };
  97 };
  98
  99 &spi0 {
 100         status = "okay";
 101
 102         m25p80@0 {
 103                 compatible = "jedec,spi-nor";
 104                 reg = <0>;
 105                 spi-max-frequency = <8600000>;
 106                 m25p,fast-read;
 107
 108                 partitions {
 109                         compatible = "fixed-partitions";
 110                         #address-cells = <1>;
 111                         #size-cells = <1>;
 112
 113                         partition@0 {
 114                                 label = "u-boot";
 115                                 reg = <0x0 0x30000>;
 116                                 read-only;
 117                         };
 118
 119                         partition@30000 {
 120                                 label = "u-boot-env";
 121                                 reg = <0x30000 0x10000>;
 122                                 read-only;
 123                         };
 124
 125                         factory: partition@40000 {
 126                                 label = "factory";
 127                                 reg = <0x40000 0x10000>;
 128                                 read-only;
 129                         };
 130
 131                         partition@50000 {
 132                                 compatible = "denx,uimage";
 133                                 label = "firmware";
 134                                 reg = <0x50000 0x713000>;
 135                         };
 136
 137                         partition@763000 {
 138                                 label = "manufacture";
 139                                 reg = <0x763000 0x7D000>;
 140                                 read-only;
 141                         };
 142
 143                         partition@7E0000 {
 144                                 label = "backup";
 145                                 reg = <0x7E0000 0x10000>;
 146                                 read-only;
 147                         };
 148
 149                         partition@7F0000 {
 150                                 label = "storage";
 151                                 reg = <0x7F0000 0x10000>;
 152                                 read-only;
 153                         };
 154                 };
 155         };
 156 };
 157
 158 &pci {
 159         status = "okay";
 160 };
 161
 162 &pci1 {
 163         status = "okay";
 164
 165         wifi@0,0 {
 166                 compatible = "pci1814,3091";
 167                 reg = <0x10000 0 0 0 0>;
 168                 ralink,mtd-eeprom = <&factory 0x8000>;
 169         };
 170 };
 171
 172 &wmac {
 173         status = "okay";
 174         ralink,2ghz = <0>;
 175         ralink,mtd-eeprom = <&factory 0x0>;
 176 };
 177
 178 &ehci {
 179         status = "okay";
 180 };
 181
 182 &ohci {
 183         status = "okay";
 184 };