target/linux/ramips/dts/rt3883_belkin_f9k110x.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "rt3883.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "ralink,rt3883-soc";
  10
  11         rtl8367b {
  12                 compatible = "realtek,rtl8367b";
  13                 gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
  14                 gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
  15                 realtek,extif1 = <1 0 1 1 1 1 1 1 2>;
  16         };
  17
  18 };
  19
  20 &gpio1 {
  21         status = "okay";
  22 };
  23
  24 &spi0 {
  25         status = "okay";
  26
  27         flash@0 {
  28                 compatible = "jedec,spi-nor";
  29                 reg = <0>;
  30                 spi-max-frequency = <25000000>;
  31
  32                 partitions {
  33                         compatible = "fixed-partitions";
  34                         #address-cells = <1>;
  35                         #size-cells = <1>;
  36
  37                         partition@0 {
  38                                 label = "uboot";
  39                                 reg = <0x0 0x30000>;
  40                                 read-only;
  41                         };
  42
  43                         partition@30000 {
  44                                 label = "uboot-env";
  45                                 reg = <0x30000 0x10000>;
  46                                 read-only;
  47                         };
  48
  49                         factory: partition@40000 {
  50                                 label = "factory";
  51                                 reg = <0x40000 0x10000>;
  52                                 read-only;
  53                         };
  54
  55                         partition@50000 {
  56                                 compatible = "denx,uimage";
  57                                 label = "firmware";
  58                                 reg = <0x50000 0x7a0000>;
  59                         };
  60
  61                         partition@7f0000 {
  62                                 label = "user-cfg";
  63                                 reg = <0x7f0000 0x10000>;
  64                                 read-only;
  65                         };
  66                 };
  67         };
  68 };
  69
  70 &ethernet {
  71         port@0 {
  72                 mediatek,fixed-link = <1000 1 1 1>;
  73                 phy-mode = "rgmii";
  74         };
  75 };
  76
  77 &pinctrl {
  78         state_default: pinctrl0 {
  79                 gpio {
  80                         ralink,group = "i2c", "jtag", "uartf";
  81                         ralink,function = "gpio";
  82                 };
  83         };
  84 };
  85
  86 &wmac {
  87         status = "okay";
  88         ralink,mtd-eeprom = <&factory 0>;
  89 };
  90
  91 &pci {
  92         status = "okay";
  93 };
  94
  95 &pci1 {
  96         status = "okay";
  97
  98         wifi@1,0 {
  99                 compatible = "pci1814,3091";
 100                 reg = <0x10000 0 0 0 0>;
 101                 ralink,5ghz = <0>;
 102                 ralink,mtd-eeprom = <&factory 0x8000>;
 103         };
 104 };
 105
 106 &ehci {
 107         status = "okay";
 108 };
 109
 110 &ohci {
 111         status = "okay";
 112 };