target/linux/ramips/dts/rt3883_belkin_f9k110x.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "rt3883.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "ralink,rt3883-soc";
  10
  11         rtl8367b {
  12                 compatible = "realtek,rtl8367b";
  13                 gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
  14                 gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
  15                 realtek,extif1 = <1 0 1 1 1 1 1 1 2>;
  16         };
  17 };
  18
  19 &gpio1 {
  20         status = "okay";
  21 };
  22
  23 &spi0 {
  24         status = "okay";
  25
  26         flash@0 {
  27                 compatible = "jedec,spi-nor";
  28                 reg = <0>;
  29                 spi-max-frequency = <25000000>;
  30
  31                 partitions {
  32                         compatible = "fixed-partitions";
  33                         #address-cells = <1>;
  34                         #size-cells = <1>;
  35
  36                         partition@0 {
  37                                 label = "uboot";
  38                                 reg = <0x0 0x30000>;
  39                                 read-only;
  40                         };
  41
  42                         partition@30000 {
  43                                 label = "uboot-env";
  44                                 reg = <0x30000 0x10000>;
  45                                 read-only;
  46                         };
  47
  48                         factory: partition@40000 {
  49                                 label = "factory";
  50                                 reg = <0x40000 0x10000>;
  51                                 read-only;
  52                         };
  53
  54                         partition@50000 {
  55                                 compatible = "denx,uimage";
  56                                 label = "firmware";
  57                                 reg = <0x50000 0x7a0000>;
  58                         };
  59
  60                         partition@7f0000 {
  61                                 label = "user-cfg";
  62                                 reg = <0x7f0000 0x10000>;
  63                                 read-only;
  64                         };
  65                 };
  66         };
  67 };
  68
  69 &ethernet {
  70         port@0 {
  71                 mediatek,fixed-link = <1000 1 1 1>;
  72                 phy-mode = "rgmii";
  73         };
  74 };
  75
  76 &state_default {
  77         gpio {
  78                 groups = "i2c", "jtag", "uartf";
  79                 function = "gpio";
  80         };
  81 };
  82
  83 &wmac {
  84         status = "okay";
  85         ralink,mtd-eeprom = <&factory 0>;
  86 };
  87
  88 &pci {
  89         status = "okay";
  90 };
  91
  92 &pci1 {
  93         status = "okay";
  94
  95         wifi@1,0 {
  96                 compatible = "pci1814,3091";
  97                 reg = <0x10000 0 0 0 0>;
  98                 ralink,5ghz = <0>;
  99                 ralink,mtd-eeprom = <&factory 0x8000>;
 100         };
 101 };
 102
 103 &ehci {
 104         status = "okay";
 105 };
 106
 107 &ohci {
 108         status = "okay";
 109 };