ramips: clean and improve MAC address setup in 02_network
[oweals/openwrt.git] / target / linux / ramips / dts / rt3883_belkin_f9k110x.dtsi
1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2
3 #include "rt3883.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9         compatible = "ralink,rt3883-soc";
10
11         rtl8367b {
12                 compatible = "realtek,rtl8367b";
13                 gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
14                 gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
15                 realtek,extif1 = <1 0 1 1 1 1 1 1 2>;
16         };
17
18 };
19
20 &gpio1 {
21         status = "okay";
22 };
23
24 &spi0 {
25         status = "okay";
26
27         flash@0 {
28                 compatible = "jedec,spi-nor";
29                 reg = <0>;
30                 spi-max-frequency = <25000000>;
31
32                 partitions {
33                         compatible = "fixed-partitions";
34                         #address-cells = <1>;
35                         #size-cells = <1>;
36
37                         partition@0 {
38                                 label = "uboot";
39                                 reg = <0x0 0x30000>;
40                                 read-only;
41                         };
42
43                         partition@30000 {
44                                 label = "uboot-env";
45                                 reg = <0x30000 0x10000>;
46                                 read-only;
47                         };
48
49                         factory: partition@40000 {
50                                 label = "factory";
51                                 reg = <0x40000 0x10000>;
52                                 read-only;
53                         };
54
55                         partition@50000 {
56                                 compatible = "denx,uimage";
57                                 label = "firmware";
58                                 reg = <0x50000 0x7a0000>;
59                         };
60
61                         partition@7f0000 {
62                                 label = "user-cfg";
63                                 reg = <0x7f0000 0x10000>;
64                                 read-only;
65                         };
66                 };
67         };
68 };
69
70 &ethernet {
71         port@0 {
72                 mediatek,fixed-link = <1000 1 1 1>;
73                 phy-mode = "rgmii";
74         };
75 };
76
77 &pinctrl {
78         state_default: pinctrl0 {
79                 gpio {
80                         ralink,group = "i2c", "jtag", "uartf";
81                         ralink,function = "gpio";
82                 };
83         };
84 };
85
86 &wmac {
87         status = "okay";
88         ralink,mtd-eeprom = <&factory 0>;
89 };
90
91 &pci {
92         status = "okay";
93 };
94
95 &pci1 {
96         status = "okay";
97
98         wifi@1,0 {
99                 compatible = "pci1814,3091";
100                 reg = <0x10000 0 0 0 0>;
101                 ralink,5ghz = <0>;
102                 ralink,mtd-eeprom = <&factory 0x8000>;
103         };
104 };
105
106 &ehci {
107         status = "okay";
108 };
109
110 &ohci {
111         status = "okay";
112 };