ramips: fix MAC address setup for Xiaomi MiWiFi Nano
[oweals/openwrt.git] / target / linux / ramips / dts / rt3883_belkin_f9k110x.dtsi
1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2
3 #include "rt3883.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9         compatible = "ralink,rt3883-soc";
10
11         rtl8367b {
12                 compatible = "realtek,rtl8367b";
13                 gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
14                 gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
15                 realtek,extif1 = <1 0 1 1 1 1 1 1 2>;
16         };
17 };
18
19 &gpio1 {
20         status = "okay";
21 };
22
23 &spi0 {
24         status = "okay";
25
26         flash@0 {
27                 compatible = "jedec,spi-nor";
28                 reg = <0>;
29                 spi-max-frequency = <25000000>;
30
31                 partitions {
32                         compatible = "fixed-partitions";
33                         #address-cells = <1>;
34                         #size-cells = <1>;
35
36                         partition@0 {
37                                 label = "uboot";
38                                 reg = <0x0 0x30000>;
39                                 read-only;
40                         };
41
42                         partition@30000 {
43                                 label = "uboot-env";
44                                 reg = <0x30000 0x10000>;
45                                 read-only;
46                         };
47
48                         factory: partition@40000 {
49                                 label = "factory";
50                                 reg = <0x40000 0x10000>;
51                                 read-only;
52                         };
53
54                         partition@50000 {
55                                 compatible = "denx,uimage";
56                                 label = "firmware";
57                                 reg = <0x50000 0x7a0000>;
58                         };
59
60                         partition@7f0000 {
61                                 label = "user-cfg";
62                                 reg = <0x7f0000 0x10000>;
63                                 read-only;
64                         };
65                 };
66         };
67 };
68
69 &ethernet {
70         port@0 {
71                 mediatek,fixed-link = <1000 1 1 1>;
72                 phy-mode = "rgmii";
73         };
74 };
75
76 &pinctrl {
77         state_default: pinctrl0 {
78                 gpio {
79                         ralink,group = "i2c", "jtag", "uartf";
80                         ralink,function = "gpio";
81                 };
82         };
83 };
84
85 &wmac {
86         status = "okay";
87         ralink,mtd-eeprom = <&factory 0>;
88 };
89
90 &pci {
91         status = "okay";
92 };
93
94 &pci1 {
95         status = "okay";
96
97         wifi@1,0 {
98                 compatible = "pci1814,3091";
99                 reg = <0x10000 0 0 0 0>;
100                 ralink,5ghz = <0>;
101                 ralink,mtd-eeprom = <&factory 0x8000>;
102         };
103 };
104
105 &ehci {
106         status = "okay";
107 };
108
109 &ohci {
110         status = "okay";
111 };