ramips: add support for XiaoYu XY-C5
[oweals/openwrt.git] / target / linux / ramips / dts / rt3352_allnet_all5002.dts
1 /dts-v1/;
2
3 #include "rt3352.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9         compatible = "allnet,all5002", "ralink,rt3352-soc";
10         model = "Allnet ALL5002";
11
12         i2c-gpio {
13                 #address-cells = <1>;
14                 #size-cells = <0>;
15
16                 compatible = "i2c-gpio";
17                 gpios = <&gpio0 1 GPIO_ACTIVE_HIGH &gpio0 2 GPIO_ACTIVE_HIGH>;
18                 i2c-gpio,delay-us = <10>;
19
20                 pcf0: iexp@38 {
21                         #gpio-cells = <2>;
22                         compatible = "inxp,pcf8574a";
23                         reg = <0x38>;
24                         gpio-controller;
25                 };
26
27                 hwmon@4b {
28                         compatible = "national,lm92";
29                         reg = <0x4b>;
30                 };
31         };
32
33         leds {
34                 compatible = "gpio-leds";
35
36                 ld1 {
37                         label = "all5002:green:ld1";
38                         gpios = <&pcf0 0 GPIO_ACTIVE_LOW>;
39                 };
40
41                 ld2 {
42                         label = "all5002:green:ld2";
43                         gpios = <&pcf0 1 GPIO_ACTIVE_LOW>;
44                 };
45         };
46 };
47
48 &gpio0 {
49         status = "okay";
50 };
51
52 &spi0 {
53         status = "okay";
54
55         m25p80@0 {
56                 compatible = "jedec,spi-nor";
57                 reg = <0>;
58                 spi-max-frequency = <10000000>;
59
60                 partitions {
61                         compatible = "fixed-partitions";
62                         #address-cells = <1>;
63                         #size-cells = <1>;
64
65                         partition@0 {
66                                 label = "u-boot";
67                                 reg = <0x0 0x30000>;
68                                 read-only;
69                         };
70
71                         partition@30000 {
72                                 label = "u-boot-env";
73                                 reg = <0x30000 0x10000>;
74                                 read-only;
75                         };
76
77                         factory: partition@40000 {
78                                 label = "factory";
79                                 reg = <0x40000 0x10000>;
80                                 read-only;
81                         };
82
83                         partition@50000 {
84                                 compatible = "denx,uimage";
85                                 label = "firmware";
86                                 reg = <0x50000 0x1fb0000>;
87                         };
88                 };
89         };
90 };
91
92 &pinctrl {
93         state_default: pinctrl0 {
94                 gpio {
95                         ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
96                         ralink,function = "gpio";
97                 };
98         };
99 };
100
101 &ethernet {
102         mtd-mac-address = <&factory 0x28>;
103 };
104
105 &esw {
106         mediatek,portmap = <0x3f>;
107 };
108
109 &wmac {
110         ralink,mtd-eeprom = <&factory 0>;
111 };
112
113 &ehci {
114         status = "okay";
115 };
116
117 &ohci {
118         status = "okay";
119 };