ramips: add support for TP-Link RE200 v1
[oweals/openwrt.git] / target / linux / ramips / dts / rt3052_upvel_ur-336un.dts
1 /dts-v1/;
2
3 #include "rt3050.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9         compatible = "upvel,ur-336un", "ralink,rt3052-soc";
10         model = "UPVEL UR-336UN";
11
12         aliases {
13                 led-boot = &led_wps;
14                 led-failsafe = &led_wps;
15                 led-running = &led_wps;
16                 led-upgrade = &led_wps;
17         };
18
19         cfi@1f000000 {
20                 compatible = "cfi-flash";
21                 reg = <0x1f000000 0x800000>;
22                 bank-width = <2>;
23                 device-width = <2>;
24
25                 partitions {
26                         compatible = "fixed-partitions";
27                         #address-cells = <1>;
28                         #size-cells = <1>;
29
30                         partition@0 {
31                                 label = "u-boot";
32                                 reg = <0x0 0x30000>;
33                                 read-only;
34                         };
35
36                         partition@30000 {
37                                 label = "u-boot-env";
38                                 reg = <0x30000 0x10000>;
39                                 read-only;
40                         };
41
42                         factory: partition@40000 {
43                                 label = "factory";
44                                 reg = <0x40000 0x10000>;
45                                 read-only;
46                         };
47
48                         partition@50000 {
49                                 compatible = "denx,uimage";
50                                 label = "firmware";
51                                 reg = <0x50000 0x7b0000>;
52                         };
53                 };
54         };
55
56         leds {
57                 compatible = "gpio-leds";
58
59                 3g {
60                         label = "ur-336un:green:3g";
61                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
62                 };
63
64                 gateway {
65                         label = "ur-336un:green:gateway";
66                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
67                 };
68
69                 ap {
70                         label = "ur-336un:green:ap";
71                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
72                 };
73
74                 led_wps: wps {
75                         label = "ur-336un:green:wps";
76                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
77                 };
78
79                 station {
80                         label = "ur-336un:green:station";
81                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
82                 };
83         };
84
85         keys {
86                 compatible = "gpio-keys-polled";
87                 poll-interval = <20>;
88
89                 reset_wps {
90                         label = "reset_wps";
91                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
92                         linux,code = <KEY_RESTART>;
93                 };
94
95                 mode {
96                         label = "mode";
97                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
98                         linux,code = <BTN_0>;
99                 };
100         };
101 };
102
103 &state_default {
104         gpio {
105                 ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
106                 ralink,function = "gpio";
107         };
108 };
109
110 &ethernet {
111         mtd-mac-address = <&factory 0x4004>;
112 };
113
114 &esw {
115         mediatek,portmap = <0x2f>;
116 };
117
118 &wmac {
119         ralink,mtd-eeprom = <&factory 0>;
120 };
121
122 &otg {
123         status = "okay";
124 };