ramips: add support for TP-Link RE200 v1
[oweals/openwrt.git] / target / linux / ramips / dts / rt3052_planex_mzk-wdpr.dts
1 /dts-v1/;
2
3 #include "rt3050.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6
7 / {
8         compatible = "planex,mzk-wdpr", "ralink,rt3052-soc";
9         model = "Planex MZK-WDPR";
10
11         chosen {
12                 bootargs = "console=ttyS0,115200";
13         };
14
15         cfi@1f000000 {
16                 compatible = "cfi-flash";
17                 reg = <0x1f000000 0x800000>;
18
19                 bank-width = <2>;
20                 device-width = <2>;
21
22                 partitions {
23                         compatible = "fixed-partitions";
24                         #address-cells = <1>;
25                         #size-cells = <1>;
26
27                         partition@0 {
28                                 label = "u-boot";
29                                 reg = <0x0 0x30000>;
30                                 read-only;
31                         };
32
33                         partition@30000 {
34                                 label = "u-boot-env";
35                                 reg = <0x30000 0x10000>;
36                                 read-only;
37                         };
38
39                         factory: partition@40000 {
40                                 label = "factory";
41                                 reg = <0x40000 0x10000>;
42                                 read-only;
43                         };
44
45                         partition@7f0000 {
46                                 label = "Data3G";
47                                 reg = <0x7f0000 0x10000>;
48                                 read-only;
49                         };
50
51                         partition@50000 {
52                                 compatible = "denx,uimage";
53                                 label = "firmware";
54                                 reg = <0x50000 0x680000>;
55                         };
56                 };
57         };
58
59         gpio-export {
60                 compatible = "gpio-export";
61
62                 lcd_ctrl1 {
63                         gpio-export,name = "lcd_ctrl1";
64                         gpio-export,output = <0>;
65                         gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
66                 };
67         };
68 };
69
70 &state_default {
71         gpio {
72                 ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
73                 ralink,function = "gpio";
74         };
75 };
76
77 &ethernet {
78         mtd-mac-address = <&factory 0x28>;
79 };
80
81 &esw {
82         mediatek,portmap = <0x2f>;
83 };
84
85 &wmac {
86         ralink,mtd-eeprom = <&factory 0>;
87 };
88
89 &otg {
90         status = "okay";
91 };