ramips: add support for XiaoYu XY-C5
[oweals/openwrt.git] / target / linux / ramips / dts / rt3052_mofinetwork_mofi3500-3gn.dts
1 /dts-v1/;
2
3 #include "rt3050.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9         compatible = "mofinetwork,mofi3500-3gn", "ralink,rt3052-soc";
10         model = "MoFi Network MOFI3500-3GN";
11
12         aliases {
13                 led-boot = &led_status;
14                 led-failsafe = &led_status;
15                 led-running = &led_status;
16                 led-upgrade = &led_status;
17         };
18
19         cfi@1f000000 {
20                 compatible = "cfi-flash";
21                 reg = <0x1f000000 0x800000>;
22                 bank-width = <2>;
23                 device-width = <2>;
24
25                 partitions {
26                         compatible = "fixed-partitions";
27                         #address-cells = <1>;
28                         #size-cells = <1>;
29
30                         partition@0 {
31                                 label = "u-boot";
32                                 reg = <0x0 0x30000>;
33                                 read-only;
34                         };
35
36                         partition@30000 {
37                                 label = "u-boot-env";
38                                 reg = <0x30000 0x10000>;
39                                 read-only;
40                         };
41
42                         factory: partition@40000 {
43                                 label = "factory";
44                                 reg = <0x40000 0x10000>;
45                                 read-only;
46                         };
47
48                         partition@50000 {
49                                 compatible = "denx,uimage";
50                                 label = "firmware";
51                                 reg = <0x50000 0x7b0000>;
52                         };
53                 };
54         };
55
56         leds {
57                 compatible = "gpio-leds";
58
59                 usb {
60                         label = "mofi3500-3gn:green:usb";
61                         gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
62                         trigger-sources = <&otg_port1>;
63                         linux,default-trigger = "usbport";
64                 };
65
66                 3g {
67                         label = "mofi3500-3gn:green:3g";
68                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
69                 };
70
71                 led_status: status {
72                         label = "mofi3500-3gn:green:status";
73                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
74                 };
75
76                 wps {
77                         label = "mofi3500-3gn:green:wps";
78                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
79                 };
80         };
81
82         keys {
83                 compatible = "gpio-keys-polled";
84                 poll-interval = <20>;
85
86                 reset {
87                         label = "reset";
88                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
89                         linux,code = <KEY_RESTART>;
90                 };
91
92                 connect {
93                         label = "connect";
94                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
95                         linux,code = <KEY_CONNECT>;
96                 };
97
98                 wps {
99                         label = "wps";
100                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
101                         linux,code = <KEY_WPS_BUTTON>;
102                 };
103         };
104 };
105
106 &pinctrl {
107         state_default: pinctrl0 {
108                 gpio {
109                         ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
110                         ralink,function = "gpio";
111                 };
112         };
113 };
114
115 &esw {
116         mediatek,portmap = <0x2f>;
117 };
118
119 &wmac {
120         status = "okay";
121         ralink,mtd-eeprom = <&factory 0>;
122 };
123
124 &otg {
125         status = "okay";
126 };