target/linux/ramips/dts/rt3050_netcore_nw718.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "netcore,nw718", "ralink,rt3050-soc";
  10         model = "Netcore NW718";
  11
  12         aliases {
  13                 led-boot = &led_cpu;
  14                 led-failsafe = &led_cpu;
  15                 led-running = &led_cpu;
  16                 led-upgrade = &led_cpu;
  17         };
  18
  19         leds {
  20                 compatible = "gpio-leds";
  21
  22                 led_cpu: cpu {
  23                         label = "nw718:amber:cpu";
  24                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  25                 };
  26
  27                 usb {
  28                         label = "nw718:amber:usb";
  29                         gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
  30                         trigger-sources = <&otg_port1>;
  31                         linux,default-trigger = "usbport";
  32                 };
  33
  34                 wps {
  35                         label = "nw718:amber:wps";
  36                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  37                 };
  38         };
  39
  40         keys {
  41                 compatible = "gpio-keys-polled";
  42                 poll-interval = <20>;
  43
  44                 reset {
  45                         label = "reset";
  46                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  47                         linux,code = <KEY_RESTART>;
  48                 };
  49
  50                 wps {
  51                         label = "wps";
  52                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  53                         linux,code = <KEY_WPS_BUTTON>;
  54                 };
  55         };
  56 };
  57
  58 &spi0 {
  59         status = "okay";
  60
  61         m25p80@0 {
  62                 compatible = "jedec,spi-nor";
  63                 reg = <0>;
  64                 spi-max-frequency = <25000000>;
  65
  66                 partitions {
  67                         compatible = "fixed-partitions";
  68                         #address-cells = <1>;
  69                         #size-cells = <1>;
  70
  71                         partition@0 {
  72                                 label = "u-boot";
  73                                 reg = <0x0 0x30000>;
  74                                 read-only;
  75                         };
  76
  77                         partition@30000 {
  78                                 label = "config";
  79                                 reg = <0x30000 0x20000>;
  80                                 read-only;
  81                         };
  82
  83                         factory: partition@50000 {
  84                                 label = "factory";
  85                                 reg = <0x50000 0x10000>;
  86                                 read-only;
  87                         };
  88
  89                         partition@60000 {
  90                                 compatible = "denx,uimage";
  91                                 label = "firmware";
  92                                 reg = <0x60000 0x3a0000>;
  93                         };
  94                 };
  95         };
  96 };
  97
  98 &state_default {
  99         gpio {
 100                 groups = "i2c", "jtag", "rgmii", "mdio", "uartf";
 101                 function = "gpio";
 102         };
 103 };
 104
 105 &ethernet {
 106         mtd-mac-address = <&factory 0x4>;
 107 };
 108
 109 &esw {
 110         mediatek,portmap = <0x2f>;
 111 };
 112
 113 &wmac {
 114         ralink,mtd-eeprom = <&factory 0x0>;
 115 };
 116
 117 &otg {
 118         status = "okay";
 119 };