edd95a756a5ce1b6a47b3f875113d097aa483a19
[oweals/openwrt.git] / target / linux / ramips / dts / rt3050_edimax_3g-6200n.dts
1 /dts-v1/;
2
3 #include "rt3050.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9         compatible = "edimax,3g-6200n", "ralink,rt3050-soc";
10         model = "Edimax 3g-6200n";
11
12         aliases {
13                 led-boot = &led_power;
14                 led-failsafe = &led_power;
15                 led-running = &led_power;
16                 led-upgrade = &led_power;
17         };
18
19         cfi@1f000000 {
20                 compatible = "cfi-flash";
21                 reg = <0x1f000000 0x800000>;
22                 bank-width = <2>;
23                 device-width = <2>;
24
25                 partitions {
26                         compatible = "fixed-partitions";
27                         #address-cells = <1>;
28                         #size-cells = <1>;
29
30                         partition@0 {
31                                 label = "u-boot";
32                                 reg = <0x0 0x30000>;
33                                 read-only;
34                         };
35
36                         partition@30000 {
37                                 label = "u-boot-env";
38                                 reg = <0x30000 0x10000>;
39                                 read-only;
40                         };
41
42                         factory: partition@40000 {
43                                 label = "factory";
44                                 reg = <0x40000 0x10000>;
45                                 read-only;
46                         };
47
48                         partition@3e0000 {
49                                 label = "cimage";
50                                 reg = <0x3e0000 0x20000>;
51                                 read-only;
52                         };
53
54                         partition@50000 {
55                                 compatible = "edimax,uimage";
56                                 label = "firmware";
57                                 reg = <0x50000 0x390000>;
58                         };
59                 };
60         };
61
62         leds {
63                 compatible = "gpio-leds";
64
65                 led_power: power {
66                         label = "3g-6200n:green:power";
67                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
68                 };
69
70                 wlan {
71                         label = "3g-6200n:amber:wlan";
72                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
73                 };
74
75                 3g {
76                         label = "3g-6200n:blue:3g";
77                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
78                         trigger-sources = <&otg_port1>;
79                         linux,default-trigger = "usbport";
80                 };
81         };
82
83         keys {
84                 compatible = "gpio-keys-polled";
85                 poll-interval = <20>;
86
87                 reset {
88                         label = "reset";
89                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
90                         linux,code = <KEY_RESTART>;
91                 };
92
93                 rfkill {
94                         label = "wlanswitch";
95                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
96                         linux,code = <KEY_RFKILL>;
97                 };
98         };
99 };
100
101 &state_default {
102         gpio {
103                 ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
104                 ralink,function = "gpio";
105         };
106 };
107
108 &ethernet {
109         mtd-mac-address = <&factory 0x4>;
110 };
111
112 &esw {
113         mediatek,portmap = <0x2f>;
114 };
115
116 &wmac {
117         ralink,mtd-eeprom = <&factory 0>;
118 };
119
120 &otg {
121         status = "okay";
122 };